Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WASHER, SHOULDERED

Active
SPE4A6-26-T-04MVFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three shouldered washers identified by NSN 5310-01-260-3501, with a required delivery within 20 days after order placement. The solicitation, issued under number SPE4A6-26-T-04MV, was posted on July 17, 2026, with responses due by July 22, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to stringent packaging standards as outlined by DLA, and non-accepted supplies must have all government identification removed. Physical identification of the bare item must comply with marking specifications. Additionally, technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD training on handling export-controlled technical data, and have received explicit approval from DLA. The place of performance is designated as FPO, with Abigail Hatch as the primary point of contact, reachable via email and phone provided in the contract details.

General Info

Three shoulderered washers solicited by DLA through July 15, 2026, for federal use under NSN 5310-01-260-3501.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332722 - Bolt, Nut, Screw, Rivet, and Washer ManufacturingView NAICS

Place of Performance

UNIT 100311 BOX 1, FPO, AE, 09578, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-04MV.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Abigail Hatch
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WASHER,SHOULDERED
WASHER, SHOULDERED

RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.

RD002, COVERED DEFENSE INFORMATION APPLIES

RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT

RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES

RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5310-01-260-3501 Quantity: 3 EA Purchase Request: 7017171273QTY: 3 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332722
New
DIBBS
Precision Machining of Aircraft Floor SubcomponentsA subcontract opportunity exists for precision machining of metal or composite subcomponents that will be integrated into the aircraft floor system identified by NSN 1560004389290. The work must adhere to strict aerospace industry tolerances and quality standards to ensure compatibility, durability, and safety in military aviation applications. The solicitation is linked to the Defense Logistics Agency under the Department of Defense and falls under NAICS code 332722, indicating it pertains to machine shops and precision manufacturing services. The contract is posted as a subcontract, though no set-aside categorization or specific award type is specified, and performance location details are not provided. Interested parties must ensure compliance with all technical specifications and quality assurance protocols required for defense aerospace systems, with the opportunity accessible through the DIBBS portal under contract number SPE4A726V0901.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Precision Manufacturing of Self-Locking NutsThe contract entails the manufacture and supply of 1,000 units of military-spec self-locking nuts, with comprehensive requirements covering precision machining, rigorous inspection protocols, secure packaging, and timely delivery to meet defense standards. All work must adhere to strict military specifications to ensure reliability and performance under operational conditions, and the procurement is being managed under a subcontract structure by the Defense Logistics Agency on behalf of the Department of Defense. The NAICS code 332722 confirms the focus on screw and nut manufacturing, and the contract was posted on July 17, 2026, with performance location and point of contact information not specified. The referenced solicitation identifier links to the official DIBBS portal for award tracking and administrative purposes.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Machine Screw Supply – NSN 5305014843051
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Precision Machined Parts Manufacturing
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
Supply of Spring Tension Washers (NSN 5310-14-414-7491)The contract pertains to the procurement and delivery of ten Spring Tension Washers identified by NSN 5310-14-414-7491, manufactured to meet federal military specifications. Although the original line item was canceled, the contract acknowledges an ongoing or potential recurring requirement for these components, suggesting continued future demand. The procurement falls under the subcontract category and is managed by the Defense Logistics Agency under the Department of Defense, with the NAICS code 332722 indicating the manufacturing classification for spring and wire product production. The award was posted on July 17, 2026, and is accessible via the DIBBS system, though specific delivery location and point of contact details are not provided.
Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

N/A
View Details
NAICS: 332722
New
DIBBS
PIN-RIVETThe contract pertains to the procurement of 514 units of PIN-RIVET with NSN 5320-01-164-1692 under solicitation SPE4A7-26-Q-0846, with a response deadline of July 21, 2026, and a required delivery within 36 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance mandates CMMC Level 2 either through a self-assessment or certified third-party assessment. Packaging must adhere to DLA standards, and inspection and acceptance occur at the origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the U.S., and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization. The contracting activity is the Department of Defense, specifically the ASC Supplier Oper AE and AF Division, with Brad Ingram listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAGThis contract specifies the procurement of 1,000 self-locking hexagonal nuts identified by NSN 5310-01-358-7622 and part number MS17829Z6C, manufactured in accordance with NASM17829 Revision 2 dated 09/30/2025 and referenced standards NASM25027 Revision 1 and MIL-DTL-32258. All items are classified as critical application components and must comply with stringent technical and quality requirements outlined in the DLA Master List, with sampling procedures governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated. The contract enforces strict prohibitions against the intentional use of mercury or mercury-containing compounds in any hardware or packaging, with limited exceptions for functional applications such as batteries, fluorescent lamps, instruments, and chemical reagents specified by NAVSEA. Portable devices containing mercury must include dual containment and be shockproof as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization must follow DLA packaging guidelines. The contract explicitly prohibits mercury in preservation, packaging, and marking via IP056 and confirms compliance with certificate of conformance procedures unless overridden by a quality assurance letter. Delivery is FOB origin with a 163-day lead time and no variance allowed in quantity. The delivery destination is the DLA Distribution facility in New Cumberland, PA, with a required ship date of December 28, 2026, and original delivery deadline of April 28, 2027. All items are to be supplied using the authorized unit of issue, and transportation logistics follow DLA procedural notes C19 and C20. The solicitation, issued under contract SPE7M2-26-T-5458, was posted on July 17, 2026, with a response deadline of July 22, 2026, and is managed by the Department of Defense’s Nuclear Reactor Program.
NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract specifies the procurement of 293 units of BOLT, SHEAR with NSN 5306-01-129-0566 under solicitation SPE4A6-26-T-05DZ, with a delivery requirement of 191 days from the award date, to be shipped FOB origin to DLA Distribution Jacksonville at the designated parcel post and freight shipping addresses. The item must comply with strict DLA packaging requirements, including adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging unless superseded by higher-priority DLA Master List of Technical and Quality Requirements. The contract mandates zero non-conformances in sampling per MIL-STD-1916 or comparable zero-based plans, with verification levels assigned to critical, major, and minor attributes and all attributes treated as major unless otherwise specified. Only approved suppliers—HOWMET GLOBAL FASTENING SYSTEMS INC, SPS TECHNOLOGIES LLC, and HEARTLAND PRECISION FASTENERS INC—are authorized to furnish this part, identified by the same part number ST3M807-3-4 across different manufacturer codes. The item is designated as a critical application item requiring full compliance with configuration change management, source approval documentation, and removal of government identification from non-accepted supplies. All packaging and palletization must follow RP001 and DLA standards, with no variance permitted in quantity—exactly 293 units are required. The contract mandates delivery by January 25, 2027, with inspection and acceptance occurring at destination under DLA’s transportation and shipping protocols.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThis contract outlines the procurement of 2,632 shear bolts with part number NAS6704U16 and NSN 5306-01-248-9766 under solicitation SPE4A6-26-T-05EM, classified as a critical application item. Delivery is required within 64 days to DLA Distribution Cherry Point in North Carolina, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the delivery destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. The item must be palletized according to DLA packaging requirements, and preservation methods must exclude mercury or mercury compounds in all stages including preservation, packaging, and labeling. Mercury is prohibited except for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with additional containment requirements for portable devices. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions tied to solicitation or award dates depending on acquisition size. The contract is issued for defense use under DoD unit of issue standards, with a purchase request number of 7017010426 and a response deadline of July 17, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
RIVET, BLINDThis contract solicits 70 blind rivets (NSN 5320-00-883-9393) under a Firm Fixed Price arrangement with no tolerance for quantity variation, requiring delivery within 19 days after government direction. The item is classified as a commercial item and must comply with the current revision of the non-government standard NASM90353 Revision 4 dated December 19, 2024, with prior revisions for historically manufactured units still acceptable. Inspection and acceptance occur at origin, governed by MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, and attributed quality levels align with critical, major, and minor characteristics as defined by the applicable drawing or specification. The item must be physically marked per RQ017 and packaged in compliance with ASTM D3951 while adhering to the higher-priority DLA Master List of Technical and Quality Requirements, with all packaging and labeling conforming to MIL-STD-129 and palletization following RP001 DLA Packaging Requirements. The contract mandates adherence to cybersecurity standards including CMMC Level 2 self-assessment and prohibits the use of certain telecommunications and software services, including ByteDance-covered applications and equipment prohibited under the Federal Acquisition Supply Chain Security Act. The contractor must comply with FAR and DFARS clauses related to equal opportunity, labor rights, trafficking prevention, environmental restrictions including hexavalent chromium and fluorinated foams, and supply chain traceability. Payment is processed exclusively via WAWF, and the delivery destination is DLA’s New Cumberland Facility in Pennsylvania. Past performance, particularly SPRS assessments, carries the most weight in evaluation, followed by delivery schedule compliance and pricing, with award based on a trade-off approach rather than LPTA. The contract incorporates additional requirements for DPAS prioritization, whistleblower protections, and prohibitions on confidential internal agreements, and requires current representations in SAM.gov including UEI, CAGE code, and socioeconomic status.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract pertains to the procurement of a machine screw identified by part number NAS8403-11 and NSN 5305013226100, manufactured to the NAS8402-8404 standard, Revision 5 dated 02/28/2020, with a thread class of 3A. The item is classified as a commercial item and must comply with applicable military and consensus non-governmental standards, accepting both current and prior revisions of the standard as long as they were valid at the time of manufacture. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions for packaging, inspection, and identification marking. Packaging must conform to MIL-STD-2073-1E, with preservation methods, materials, and unit container details strictly defined, and marking must adhere to MIL-STD-129. Additional quality controls include zero-defect acceptance sampling per MIL-STD-1916 or comparable plans, with critical attributes requiring stringent verification levels. The use of mercury or mercury compounds in packaging is prohibited. The screws are to be delivered FOB origin in a quantity of eleven units within twenty days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the point of origin. The delivery destination is the Joint Logistics Unit East in Moorebank, Australia, with freight routed through an Australian government cargo office and DHL. The contract’s purchase request number is 7017436490, with a unit price of $11.00, resulting in a total value of $121.00. The solicitation was issued under number SPE4A6-26-T-04YQ, with a response deadline of July 17, 2026, and an original required delivery date of July 13, 2026. The contracting activity is the ASC Commodities Division under the Department of Defense, with Abigail Hatch listed as the primary point of contact. The NAICS code 332722 identifies the industry classification. All items must be fully compliant with government identification, traceability, and documentation requirements, and suppliers are subject to tailored quality requirements applicable to both manufacturers and non-manufacturers. Final delivery and marking must reflect all applicable specifications without exception.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332312
New
DIBBS
Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.
Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 483112
New
DIBBS
Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.
Deep Sea Passenger Transportation

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.
Machine Shops

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 29 days
View Details