Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Wave Diagnostic Hardware Prototyping

Active

Federal

Response Deadline12/14/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Wave Diagnostic Hardware Prototyping subcontract, issued under the Department of Defense for the Defense Advanced Research Projects Agency, focuses on the design of novel metrology hardware for prime contractors involved in DARPA Liquid Surge projects. The primary objective is to enhance the understanding of wave propagation in compressible fluids through the development of experimental protocols and the creation of detailed technical drawings using CAD software. The scope of work includes the establishment of standard operating procedures for hardware operation and the utilization of fluid testing rigs and precision metrology instruments. Key deliverables for this engagement consist of comprehensive technical drawings and formal SOP documents. The solicitation was posted on October 14, 2026, with a response deadline of December 14, 2026, falling under NAICS code 541330.

General Info

Agency

Department Of Defense → Defense Advanced Research Projects Agcy

NAICS

541330 - Engineering Services

Place of Performance

VA

Set-Aside

NONE

Documents

This scope was carved out of DARPA-PA-25-07-05.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Liquid Surge

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineDec 14

Submission deadline

Response Deadline

12/14/2026, 12:00:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Advanced Research Projects Agcy

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Advanced Research Projects Agcy

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Designs novel metrology hardware for prime contractors on DARPA Liquid Surge projects to understand wave propagation in compressible fluids. Develops experimental protocols, creates detailed technical drawings for hardware fabrication using CAD software, and establishes SOPs for hardware operation. Utilizes precision metrology instruments and fluid testing rigs. Delivers technical drawings and SOP documents.

Similar Contracts

Same NAICS industry code

NAWCAD WOLF Identification Systems Technical Management Support Services RFO

Solicitation # N0042126R1023

Solicitation N0042126R1023 is a small business set-aside request for offer under the SeaPort-NxG Multiple Award Contract for the Naval Air Warfare Center Aircraft Division (NAWCAD) at Webster Outlying Field (WOLF). The contract is a firm-fixed-price level of effort task order with a five-year period of performance, consisting of one base year and four option years, requiring a total of 430,070 direct labor hours. The primary objective is to provide technical management support services for Identification Systems (IDS), specifically supporting the modernization of legacy Identification Friend or Foe (IFF) systems across air, ship, and shore platforms. The scope of work includes technical and project management, budget execution, material procurement, data management, and graphics, media, and communications support. The contractor is required to provide administrative and clerical support, communications products, and maintain a facility within 50 drivable miles of NAWCAD WOLF capable of hosting meetings up to the Secret classification level. Performance will be monitored through a systematic Quality Assurance process involving the Contracting Officer's Representative (COR) and documented via the Contractor Performance Assessment Reporting System (CPARS). Proposals are evaluated based on technical approach, specifically through a sample task, past performance, and price, with technical capability being slightly more important than past performance. Compliance requirements include Cybersecurity Maturity Model Certification (CMMC) and adherence to the National Industry Security Program Operating Manual for classified data.

Naval Air Warfare Center Air Division

POSTED

about 3 hours ago

DEADLINE

Official RFP - NSWCDD HPM Support Services

Solicitation # N0017826R3107

POSTED

about 3 hours ago

DEADLINE

Electrical Field Engineering and Inspection ServicesThis subcontract for Electrical Field Engineering and Inspection Services supports prime contractors on facility projects for the California Department of General Services. The scope of work involves providing on-site technical support, quality assurance, and comprehensive documentation, including field investigations and the review of shop drawings. The selected provider will utilize BIM/CAD software to prepare final as-built drawing sets and deliver regular field reports. Performance will take place in Alameda, California, and requires the contractor or consultant to be registered with the Department of Industrial Relations for public works. The solicitation was posted on October 14, 2026, with a response deadline of November 14, 2026. This opportunity falls under NAICS code 541330 for engineering services.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

Electrical Lighting DesignerThis subcontract opportunity is for an Electrical Lighting Designer to provide specialized interior and exterior illumination design for prime contractors working on California Department of General Services facility projects. The scope of work includes designing street and area lighting as well as building electrical systems for power and lighting, utilizing calculation software such as AGi32. The selected contractor will be responsible for delivering comprehensive lighting plans, fixture schedules, and detailed illumination calculations. A critical requirement for this role is a valid California Professional Engineer license to ensure all drawings are properly sealed. The project is based in Alameda, California, under NAICS code 541330. Interested parties must submit their responses by the deadline of November 14, 2026.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

Low Voltage and Special Systems DesignerThe Low Voltage and Special Systems Designer subcontract involves providing specialized engineering and design services for communication, security, and life safety electronic systems on California Department of General Services facility projects. The scope of work includes the design of telephone, data communication, intercom, public address, security, and fire/life safety systems, with a primary focus on delivering technical specifications, wiring diagrams, and low voltage system layouts. Successful execution of this contract requires a deep understanding of regulations set by the Division of the State Architect and the State Fire Marshal. The project is based in Alameda and falls under NAICS code 541330. Interested parties must respond by November 14, 2026.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

Power Distribution and Infrastructure Design Sub-consultantThis subcontract opportunity is for a Power Distribution and Infrastructure Design Sub-consultant to provide engineering design services for high and low voltage power delivery systems on California Department of General Services facility projects. The scope of work includes the design of overhead and underground primary and secondary electrical distribution, as well as UPS and emergency power systems. The selected consultant will be responsible for developing conceptual schemes, budget packages, and full design documents, culminating in the delivery of signed and sealed electrical distribution plans, specifications, and cost estimates. The project is located in Alameda, California, and requires the consultant to hold a valid California professional licensure. Interested parties must submit their responses by November 14, 2026. This engagement falls under NAICS code 541330 and involves supporting prime contractors in the execution of critical infrastructure design for state facilities.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

RESD-PMDB 2026-11 ELECTRICAL ENGINEERING - RETAINER SERVICES

Solicitation # RESD-PMDB 2026-11

The California Department of General Services, through its Real Estate Services Division, is seeking qualifications to establish retainer agreements for professional electrical engineering services. These agreements will support new construction, additions, renovations, and remodel projects across three geographic regions: Northern, Southern, and Coastal California. Successful firms may be awarded multi-year agreements for up to five years, with a maximum total value of 5,000,000 dollars per agreement. Services are provided on an as-needed basis via negotiated firm fixed-price task orders. New task orders may only be issued during the first 36 months of the term, with the final 24 months reserved for completing outstanding work. All work must be performed and approved by a party licensed in the State of California. Evaluation of firms is based on eight criteria, including professional experience, resource availability, problem-solving capabilities, and expertise in LEED, Zero Net Energy, and regulatory requirements from the State Fire Marshal and Division of the State Architect. The selection process involves short-listing based on the Statement of Qualifications followed by interviews. Compliance requirements include mandatory registration with the Department of Industrial Relations as a public works contractor and the submission of a GenAI Disclosure and Factsheet (Std. 1000), as failure to disclose the use of generative AI will result in disqualification. Financial terms include a 10 percent retention on progress payments. Interested firms must submit their electronic Statement of Qualifications in PDF format by November 13, 2026, at 5:00 P.M.

California Department of General Services

POSTED

about 18 hours ago

DEADLINE

Energy Modeling and GHG Emissions AnalysisThis subcontract opportunity involves providing technical energy modeling and greenhouse gas emissions analysis for prime contractors working on City of Vaughan municipal projects. The selected provider will be responsible for modeling GHG emissions and potential savings across three specific sites, utilizing IESO data and software such as EnergyPlus or TRNSYS to develop both Business-as-Usual and Low Carbon scenarios. The final deliverables for the project include detailed energy models and a quantitative GHG emissions savings report for each of the three sites. Qualified candidates must hold a P.Eng or CEM certification to be eligible for the contract. Interested parties should note that the response deadline is November 5, 2026. This project falls under NAICS code 541330 and is focused on supporting the City of Vaughan's environmental and energy efficiency goals through rigorous technical analysis.

City of Vaughan

POSTED

about 19 hours ago

DEADLINE

District Energy System Feasibility Study

Solicitation # RFP 26-092

The City of Vaughan is soliciting proposals for a District Energy System Feasibility Study under RFP 26-092 to evaluate the viability of implementing low-carbon energy systems to reduce community greenhouse gas emissions by 2050. This city-wide project is supported by the Federation of Canadian Municipalities' Green Municipal Fund and is divided into three primary tasks: data collection and methodology, geospatial analysis and site selection for three specific area profiles, and the development of individual implementation strategies. Key deliverables include site-specific modeling of business-as-usual and low-carbon scenarios, a comprehensive implementation plan featuring regulatory tools and bylaws, and a life cycle assessment of a typical system. The City will retain full ownership of all generated data and scripts. The contract will be awarded to the proponent with the highest cumulative score, derived from a two-stage evaluation process. Proponents must first achieve a minimum technical score of 70 percent in Stage 1 to have their pricing envelopes opened for the Stage 2 pricing evaluation, where the lowest bid receives maximum points. Submissions must be made exclusively online by November 5, 2026, via the designated bidding system. The agreement is governed by the City of Vaughan's standard consulting agreement and general provisions, with the RFP prevailing in the event of conflicts. Payment is based on monthly invoicing of pre-approved expenses and milestone-based progress payments, with the City maintaining the right to reject defective services within 90 days of performance.

City of Vaughan

POSTED

about 19 hours ago

DEADLINE

Electrical System StudyThis subcontract opportunity involves providing specialized electrical engineering services for water infrastructure projects within the Region of Durham. The selected contractor will be responsible for performing electrical load calculations and power quality studies, analyzing power requirements, and coordinating directly with utility providers to ensure proper electrical distribution for pumping stations. The primary deliverable for this engagement is a comprehensive Electrical System Study Report. Qualified candidates must employ a Professional Electrical Engineer (P.Eng) to oversee the technical requirements of the project. Interested parties should note that the response deadline is November 23, 2026. This project falls under NAICS code 541330 and is designed to support prime contractors operating on behalf of the Region of Durham.

Region of Durham

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Hydraulic and Transient AnalysisThis subcontract for the Region of Durham involves providing specialized fluid dynamics modeling for prime contractors working on regional water infrastructure projects. The scope of work focuses on the hydraulic modeling of the Zone 2 water pressure district and the execution of transient analysis specifically designed to prevent water hammer. The successful contractor must possess advanced expertise in water distribution modeling software to ensure the technical accuracy of the infrastructure assessments. The primary deliverables for this engagement are comprehensive Hydraulic Analysis and Transient Analysis Reports. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline set for November 23, 2026. The project falls under NAICS code 541330, reflecting the engineering services required for these critical water system evaluations.

Region of Durham

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Specialized Structural ScanningThis subcontract opportunity, titled Specialized Structural Scanning, involves performing non-destructive testing on existing reservoir walls for prime contractors working on Region of Durham water infrastructure projects. The selected provider will utilize specialized GPR or X-ray scanning equipment to identify reinforcement locations, ensuring that wall openings are created safely. The primary deliverables for this engagement are a Structural Site Assessment and a Reinforcement Scanning Report. The solicitation was posted on October 14, 2026, with a response deadline of November 23, 2026. Falling under NAICS code 541330, the project is managed by the Region of Durham. Interested parties can find further details and submission guidelines through the official bids and tenders portal.

Region of Durham

POSTED

about 20 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Defense Advanced Research Projects Agcy

Same awarding agency

Fluid Dynamics Experimental Validation ServicesThe Fluid Dynamics Experimental Validation Services subcontract, issued by the Defense Advanced Research Projects Agency under the Department of Defense, involves performing physical experiments to validate wave predictions for DARPA Liquid Surge projects. The selected provider will execute specific protocols using shock tubes and high-speed data acquisition systems to measure the thermophysical responses of shock waves, with a particular focus on density, salinity, base pressure, and wave Mach number. The contractor is responsible for delivering comprehensive tabulated thermophysical responses, detailed experimental protocols, and a final accuracy report. This opportunity falls under NAICS code 541715, with a response deadline set for December 14, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Wave Prediction Computational Tool DevelopmentThis subcontract, titled Wave Prediction Computational Tool Development, supports prime contractors on DARPA Liquid Surge projects under the Department of Defense. The primary objective is the development of advanced multiscale computational methods and prototype wave prediction tools. This work involves creating software libraries, code, and APIs utilizing kinetic theory simulations within high-performance computing environments. In addition to the technical software development, the contractor is responsible for establishing and documenting Standard Operating Procedures. The final deliverables for the project include the completed prototype computational tool, the associated software libraries, and comprehensive SOP documentation. The solicitation was posted on October 14, 2026, with a response deadline of December 14, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Surgical Validation and Clinical Testing ServicesThe Surgical Validation and Clinical Testing Services subcontract supports prime contractors on projects for the Defense Advanced Research Projects Agency Biological Technologies Office. The scope of work focuses on providing medical validation services, which include designing test cases for Component Gates utilizing synthetic tissue models, cadaveric models, and surgical simulation labs. The contractor is responsible for managing clinical trial protocols and obtaining necessary IRB approvals to validate outcomes related to surgical independence. Final deliverables consist of comprehensive validation reports and certifications of clinical efficacy. This opportunity is categorized under NAICS code 541714 and was posted on October 14, 2026, with a response deadline of November 2, 2026.

Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

DEADLINE

Surgical Collaboration Interface and Control SystemsThe Surgical Collaboration Interface and Control Systems subcontract supports prime contractors on projects for the DARPA Biological Technologies Office. The scope of work focuses on the development of human-robot interaction interfaces, specifically designing control consoles, voice and gesture interfaces, and safety overrides. These systems will utilize haptic control and low-latency communication protocols, incorporating human factors engineering standards tailored for medical environments to deliver a collaborative system for side-by-side operation. This opportunity is managed under the Department of Defense through the Defense Advanced Research Projects Agency. The project is categorized under NAICS code 541330, with a posting date of October 14, 2026, and a response deadline of November 2, 2026.

Engineering Services

POSTED

DEADLINE

Autonomous Surgical Planning and Execution SoftwareThis subcontract involves the development of specialized AI software for prime contractors supporting the Defense Advanced Research Projects Agency Biological Technologies Office. The project focuses on creating an integrated AI software suite for robotic platforms, specifically implementing algorithms for autonomous path planning, case assessment, and surgical independence. These systems will be built using Reinforcement Learning frameworks and high-compute GPU clusters to ensure high-performance execution. A critical component of the contract is the validation of the software for medical autonomy, which must adhere to strict DARPA safety gates. The work falls under NAICS code 541715 and is aimed at advancing the capabilities of autonomous surgical planning and execution within the Department of Defense framework.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Surgical Robotic Arm and End-Effector DevelopmentThis subcontract for the Defense Advanced Research Projects Agency involves the design and manufacture of physical robotic hardware for prime contractors working on Biological Technologies Office projects. The scope of work focuses on the engineering of high-precision actuators and surgical end-effectors, specifically scalpels, forceps, and suturing tools, utilizing biocompatible materials and medical-grade alloys to deliver a functional and scalable robotic hardware platform. A critical requirement of the project is strict adherence to ISO 13485 medical device safety standards. The opportunity was posted on October 14, 2026, with a response deadline of November 2, 2026, falling under NAICS code 339112.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Solicitation # DARPA-PA-25-07-05

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

DARPA Surgical Competition (DSC) Second Industry Day

Solicitation # DARPA-SN-27-02

The Defense Advanced Research Projects Agency (DARPA) Biological Technologies Office (BTO) is hosting a Second Industry Day for the DARPA Surgical Competition (DSC) under solicitation number DARPA-SN-27-02. This virtual event is scheduled for November 4, 2026, from 4:00 PM to 6:00 PM Eastern Time, with a registration deadline of November 2, 2026. While this notice is not a formal solicitation for proposals, it serves to engage potential competitors in a competition aimed at establishing the state of the art for open, robotic trauma surgery and developing a minimum viable product for scalable, autonomous robotic surgical assistance. The competition will evaluate platforms across three primary performance lanes: Component Gates, which assess system safety and autonomy through medical knowledge, physical capability, and rapid learning; Surgical Collaboration, which tests the ability to work alongside a human surgeon; and Surgical Independence, which evaluates the platform's ability to independently plan and execute end-to-end trauma procedures. The DSC will be conducted at the unclassified level. Technical and administrative inquiries are directed to Program Manager Jeremy Pamplin at SurgicalCompetition@darpa.mil.

Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

DEADLINE

Atomically Precise Molecules (APM)

Solicitation # DARPA-PS-26-141

The Defense Advanced Research Projects Agency (DARPA) Multi X Office is soliciting proposals for the Atomically Precise Molecules (APM) program under solicitation DARPA-PS-26-141. The program aims to develop innovative synthesis techniques for programmable precision polymers (PPPs) and nonlinear optical (NLO) materials to overcome performance gaps in optical communications and LiDAR. The primary objective is the creation of scalable, fit-for-purpose materials, culminating in a prototype demonstration of a revolutionary NLO material integrated into a government-provided electro-optic modulator. Research focusing solely on inorganic materials or incremental improvements to the state-of-the-art is specifically excluded. This 36-month effort is structured in two technical phases, with Phase I focusing on developing PPP synthesis capabilities over the first 12 months. Awards will be issued as Other Transaction (OT) for Prototype Agreements under 10 U.S.C. 4022. Key requirements include CMMC Level 2 self-assessment compliance and adherence to a program-specific Controlled Unclassified Information (CUI) guide. Non-US organizations, FFRDCs, UARCs, and government entities are ineligible to serve as prime performers, though FFRDCs and UARCs may participate as subawardees provided they meet specific certification and conflict of interest mitigation requirements. Proposals must be submitted via the Broad Agency Announcement Tool (BAAT) by December 18, 2026. Submissions must include a technical and management volume, a price proposal with a detailed spreadsheet, a Task Description Document, and a schedule of milestones and payments. Evaluation will be based on the technical approach, relevance to the DARPA mission, budget realism, and the capability to transition the technology to military or commercial sectors. Payments are milestone-based and processed through the Wide Area Workflow (WAWF) system.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

High-throughput Unmasking of Biological Interactomes with Binding Landscape Emulators (HUBBLE)

Solicitation # DARPA-PA-27-01

Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

DEADLINE

Intrinsic Market Resilience (IMR)

Solicitation # DARPA-PS-26-138

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

in about 2 months

Information Processing Techniques Office Office-Wide

Solicitation # HR001126S0011

The Defense Advanced Research Projects Agency Information Processing Techniques Office issued Broad Agency Announcement HR001126S0011 to solicit revolutionary research ideas that provide decisive computational advantages for national security. The scope focuses on three primary thrust areas: AI Innovation and Execution for energy-efficient and trustworthy systems at the network edge, Inherent Security and Privacy to create adaptable and secure cyberspace tools, and Resilient Megasystems to model and protect complex interconnected systems like power grids. This open solicitation is available to all responsible sources, including U.S. and non-U.S. organizations, and may result in awards through procurement contracts, grants, cooperative agreements, or Other Transaction agreements. Submissions follow a two-step evaluation process beginning with a mandatory technical conformance review of a five-page abstract, followed by a comprehensive evaluation for invited proposers. Key evaluation criteria include overall scientific and technical merit, potential contribution to the DARPA mission, plans for implementing resilient software using formal methods, and cost realism. Proposers must possess an active SAM.gov Unique Entity Identifier and meet CMMC Level 2 self-assessment requirements for protecting Controlled Unclassified Information. Due to the nature of the research, strict protocols are in place for classified submissions, and DARPA will conduct risk-based security reviews of all senior key personnel to identify potential foreign influence.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS