Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

WEB, STRUCTURAL COMPONE

Active
SPE4A7-26-T-608BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The solicitation SPE4A7-26-T-608B requires the delivery of three units of structural web component NSN 1560-01-545-0377 with a delivery timeline of 605 days after award, though one unit must be submitted within 180 calendar days for First Article Testing at Tinker Air Force Base under strict government oversight. The First Article must be tested by the government, with a written decision on approval or disapproval due within 120 days of receipt, and disposition of test units must follow applicable FAR clauses. All offers must exclude covered telecommunications equipment or services as defined under FAR 52.204-24 and DFARS 252.204-7016. Domestic material restrictions apply under the Berry Amendment and Buy American Act with a threshold of $150,000; non-domestic materials require explicit disclosure. Small business joint ventures must provide specific certifications in their offers. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating demand and reduce administrative burden. The use of additive manufacturing for any supplied item is prohibited unless explicitly approved in advance by the contracting officer. Access to the Vendor Shipment Module for shipping to DLA will soon require registration through AMPS, and vendors using VSM WebServices must update their internal schemas to maintain functionality. Offers must not include parts from unapproved sources, and contractors must certify their current dealer or distributor certification status. Fast Pay does not apply to this contract, and while quotations submitted after the closing date are allowed via DIBBS with a “No Bid” type, they do not guarantee future award eligibility.

General Info

Deliver three structural web components in 605 days, one within 180 days for government testing, domestic materials required, no additive manufacturing without approval.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-608B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
OF THE SOLICITATION, SELECT
‘OTHER EQUIVALENT' AND PROVIDE DETAILS OF CURRENT DEALER/DISTRIBUTOR
CERTIFICATION AND/OR ACCREDITATION.
Fast Pay does not apply to this solicitation
FIRST ARTICLE APPROVAL – GOVERNMENT TESTING REQUIRED (FAR 52.209-4 AND
ALT I)
THE CONTRACTOR SHALL DELIVER 1 UNIT(S) OF
LOT/ITEM 1560 / 15450377
WITHIN 180 CALENDAR DAYS FROM THE DATE OF
THIS CONTRACT TO THE GOVERNMENT AT THE LOCATION SPECIFIED BELOW FOR
FIRST ARTICLE TESTS.
FY2303
TINKER AFB
DDOO-SOP(FIRST ARTICLE)
ATTN: FIRST ARTICLE MONITOR
BLDG 469 DOOR 12
7330 SENTRY BLVD
TINKER AIR FORCE BASE
OK
73145-8000
ATTN DD00-SOP, DO NOT POST, NON-ACCOUNTABLE/ DO NOT PUT IN SUPPLY AFLCMC/LZPED
WITHIN 120 CALENDAR DAYS AFTER THE GOVERNMENT
RECEIVES THE FIRST ARTICLE, THE CONTRACTING OFFICER SHALL NOTIFY THE
CONTRACTOR, IN WRITING, OF THE CONDITIONAL APPROVAL, APPROVAL, OR
DISAPPROVAL OF THE FIRST ARTICLE.
DISPOSITION OF FAT UNITS IAW PARAGRAPH (e) OF FAR 52.209-3 OR 52.209-4.
Due to the volatility of demands, and frequent quantity changes on open
purchase requests, offerors are highly encouraged to submit quantity
ranges when quoting. If a PR is evaluated manually, quoting ranges
provides the buyer the option to combine requirements or reduce the
quantity as needed without resoliciting or adding any additional
administrative burden for either party involved when making an award.
This does not apply to Auto IDC.
If you anticipate quoting on a solicitation after the closing date,
please submit a DIBBS quote with a bid type of “No Bid” and place an
anticipated quote date or the reason you are not willing to quote. This
SPE4A7-26-T-608B
SECTION A
does not prevent you from submitting an actual quote on DIBBS at a later
date. It will overlay your previous no quote. This informs buyers of
your intention to quote and prevents multiple calls for updates and
cancelling of requirements assumed to be non-procurable due to no
quotes/sources. The submission of an anticipated quote date does not
preclude DLA from making an award to another acceptable timely offer.
APEX Accelerators, formally known as the Procurement Technical
Assistance Program (PTAP), is designed to increase the number of
U.S. businesses capable of bidding and performing on local, state,
and federal government contracts. APEX Accelerators provide critical
assistance to new and existing businesses interested government
contracting to enhance the defense industrial base at no cost. Visit
https://www.apexaccelerators.us/#/ for more information.
6,
THE OFFEROR, BY SUBMISSION OF ITS QUOTATION, REPRESENTS IT WILL NOT
PROVIDE COVERED TELECOMMUNICATIONS EQUIPMENT OR SERVICES TO THE
GOVERNMENT IN THE PERFORMANCE OF ANY AWARD RESULTING FROM THIS
SOLICITATION, IN ACCORDANCE WITH PARAGRAPH (d) OF THE CLAUSE AT FAR
52.204-24, REPRESENTATION REGARDING CERTAIN TELECOMMUNICATIONS AND VIDEO
SURVEILLANCE SERVICES OR EQUIPMENT, OR IN ACCORDANCE WITH ITS EXISTING
REPRESENTATION IN PARAGRAPH (c) OF THE PROVISION AT DFARS 252.204-7016,
COVERED DEFENSE TELECOMMUNICATIONS EQUIPMENT OR SERVICES –
REPRESENTATION.
Caution Notice: Offerors are required to comply with domestic material
restrictions. The Berry Amendment, the Buy American Act, and other
domestic material restrictions may apply. Offerors are instructed to
refer to the solicitation clauses related to foreign sourcing for more
information on applicability. The Berry Amendment threshold has been
reduced to $150,000 and vendors must carefully review related clauses
DFARS 252.225-7006, 252.225-7012, and 252.225-7015 for applicability
requirements. If your offer is based on a non-domestic material, you are
required to provide disclosure information in your quote and/or through
written notification to the point of contact listed in the solicitation.
SPE4A7-26-T-608B
SECTION A
DoD Class Deviation 2023-O0001: A small business joint venture offeror
must submit, with its offer, the representation required in paragraph
(c) of FAR solicitation provision 52.212-3, Offeror Representations and
Certifications-Commercial Products and Commercial Services, and
paragraph (c) of FAR solicitation provision 52.219-1, Small Business
Program Representations, in accordance with 52.204-8(d) and 52.2123(b)
for the following categories:
(A) Small business;
(B) Service-disabled veteran-owned small business;
(C) Women-owned small business (WOSB) under the WOSB Program;
(D) Economically disadvantaged women-owned small business under the WOSB
Program; or
(E) Historically underutilized business zone small business.
ACCESSING & USE OF VENDOR SHIPMENT MODULE (VSM) IS CHANGING
Within approximately 2 months, ALL DLA contractors will be required to
register via DLA’s Account Management & Provisioning System (AMPS) to
access VSM. Without AMPS approval, contractors will not be able to
access VSM or ship to DLA.
Contractors using VSM WebServices MUST update their internal schema or
lose access and shipping ability. Online VSM users do not need schema
changes.
Required actions:
- Review VSM announcements. Schema updates are in the April 23, 2025
post: https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1259
- Additional notices:
https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1267
https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1252
https://www.dibbs.bsm.dla.mil/notices/msgdspl.aspx?msgid=1229
AMPS registration is not available at this time; however, check DLA's
SPE4A7-26-T-608B
SECTION A
DIBBS "Notices" section daily for updates.
- To receive AMPS/User Guide updates via email, contact:
JSONWEBServiceInquiry@dla.mil
Unless AM is specifically authorized in the solicitation/contract,
quotes/offers may not include parts or supplies made using the additive
manufacturing process. The Government will not evaluate offers that
include an item or items produced using AM, and such offers are not
eligible for award for the current procurement. A quoter/offeror
proposing to supply an AMproduced item may submit a request to the
contracting officer for approval of the item for NSN/Part Number: 1560-01-545-0377 Quantity: 3 EA Purchase Request: 7017696012QTY: 3 Delivery: 605 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
HARNESS, AIRCRAFT SAFET
Solicitation # SPE4A7-26-Q-0957
The contract specifies the procurement of a single aircraft safety shoulder harness with NSN 1680-00-555-2938 under purchase request 7017272193 for a quantity of 273 units, with delivery required within 497 days after award. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Cybersecurity compliance requires CMMC Level 2 certification through a certified third-party assessment organization. Packaging must meet DLA-specific requirements, and all items must undergo inspection and acceptance at the point of origin. Non-accepted supplies must have all government identification removed, and each item must be physically marked in accordance with bare item marking standards. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled technical data, and formal DLA authorization may access such data. The solicitation number is SPE4A7-26-Q-0957, issued on August 3, 2026, with responses due by August 22, 2026, managed by the Department of Defense through the ASC Supplier Oper AE and AF Division, with Grayson Andrews as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 18 days
View Details
NAICS: 336413
New
DIBBS
BELT, AIRCRAFT SAFET
Solicitation # SPE4A7-26-Q-0960
The contract pertains to the procurement of 115 aircraft safety belts with NSN part number 1680-99-213-0540, manufactured by MARTIN-BAKER AIRCRAFT COMPANY LIMITED under part number MBEU200780. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, identified by R or I numbers including RP001 for packaging, RQ001 for tailored quality standards, RQ009 for inspection and acceptance at origin, and RQ011 for removal of government identification from non-accepted supplies. The item must be packaged in accordance with ASTM D3951, but DLA requirements supersede this standard; all packaging and labeling must strictly comply with MIL-STD-129, and palletization must adhere to RP001. The unit of issue is each, with zero tolerance for quantity variance. Delivery is required 430 days after award, with both inspection and acceptance occurring at the origin. The delivery point is the DLA Distribution DDSP New Cumberland facility in Pennsylvania, and the freight shipping address matches the delivery destination. The Government’s material need date is January 27, 2027. Transportation logistics must conform to DLAD Proc Note C19 for general transportation and C20 for first destination handling. The solicitation was issued under contract number SPE4A7-26-Q-0960 with a response deadline of August 22, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. All packaging, marking, and documentation must reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 18 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL COM
Solicitation # SPE4A7-26-T-606Z
The contract pertains to the procurement of two support structural components for aircraft, identified by NSN 1560-00-795-8779, under solicitation SPE4A7-26-T-606Z, with a delivery deadline of 151 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. The supplier must comply with DLA packaging standards, source approval documentation, and inspection and acceptance procedures conducted at the point of origin. Export control restrictions apply due to the presence of technical data subject to ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons, whether within the U.S. or abroad, and restricting access to contractors with approved JCP certification, completed DLA training, and formal authorization. Configuration changes require formal Engineering Change Proposal requests for any deviations or waivers. The item does not require Unique Identification per the Service customer’s request, though physical marking and removal of government identification from non-accepted supplies are mandated. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors, and covered defense information is subject to applicable DFARS provisions. Delivery is designated to Tinker AFB, Oklahoma, with primary point of contact provided for procurement inquiries.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
CARTRIDGE, RESPIRATO
Solicitation # SPE8E6-26-T-3961
This contract specifies the procurement of respiratory cartridges, part number 7000051851 manufactured by 3M Company, with the NSN 4240-01-342-2857, under solicitation SPE8E6-26-T-3961. Each package contains 60 cartridges, and the item is classified as a Type I respirator cartridge with a non-extendable shelf life of 60 months, requiring compliance with NIOSH approval TC-23C-1062. The product must be free of intentionally added mercury or mercury compounds except in specific exempted applications such as batteries, fluorescent lamps, and controlled instruments, with additional containment requirements for portable mercury-containing devices per NAVSEA 5100-003D. The contract enforces strict packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129P, with special labeling for shelf life and the prohibition of plastic wrap, cushioning, or dunnage materials whenever possible. Palletization must adhere to DLA Packaging Requirements, and hazardous material shipping protocols are applicable. Cybersecurity requirements mandate a CMMC Level 2 self-assessment. Delivery is FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Five separate delivery lines specify quantities ranging from one to ten packages, with required delivery dates between March and August 2026, and destinations spanning multiple U.S. military installations including Oahu, Offutt AFB, Yokota AB, and Tampa, with explicit instructions against using parcel post in favor of traceable transportation methods. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
COVER, ACCESS, AIRCRA
Solicitation # SPE4A7-26-T-607W
The contract pertains to the procurement of 156 units of a cover and access component for aircraft, identified by part number 9-56542 REV B and NSN 1560-01-714-6823, with delivery required within 182 days of award. The item is governed by stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, inspection and acceptance at origin, and compliance with Qualified Products and Manufacturers Lists for embedded components. Technical data associated with the item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and mandating adherence to DFARS 252.225-7048; access to such data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed required DLA training and received explicit approval. The supplier must comply with DLA packaging standards, removal of government identification from non-accepted items, and documentation requirements for source approval. The contract mandates CMMC Level 2 certification for any third-party assessment organization involved in cybersecurity evaluations, and engineering documentation is controlled under DWG EI-017146823 with specified revisions of BAC standards to be strictly followed. Unit identification is not required per customer request, and the solicitation remains open until August 11, 2026, with performance centered at Tinker AFB, Oklahoma.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL ASSY, KICK, AIR
Solicitation # SPE4A7-26-T-607U
The contract pertains to the procurement of seven units of a PANEL ASSY, KICK, AIR with NSN 1560-01-560-5397 under solicitation SPE4A7-26-T-607U, with a delivery deadline of 151 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and apply based on the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. Items must be physically marked per RQ017, and sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract subjects all technical data to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without authorization, and restricts access to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval from DLA. Configuration change management requires formal Engineering Change Proposals or variance requests, and the contractor must be certified at CMMC Level 2 by a certified third-party assessment organization. Item Unique Identification is not required per customer request under DFARS 252.211-7003(c)(1)(i). The performance location is New Cumberland, PA, and sole point of contact is Theresa Sharper at DLA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
MULTIPLEXER SUBASSE
Solicitation # SPE4A5-26-T-319Z
The contract pertains to the procurement of five units of a Multiplexer Subassembly, identified by part number 16E4004-809 and NSN 5895-01-426-4389, under solicitation SPE4A5-26-T-319Z. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Configuration control and engineering change management are enforced through RQ002 and RQ011, while physical identification of items must comply with RQ017. Packaging must adhere to MIL-STD-2073-1E and DLA’s RP001, with marking per MIL-STD-129 and no special markings required. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item has no shelf life restriction. Delivery is due in 411 days FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at destination. The contract requires strict adherence to quantity limits with no variance allowed. The prime contractor is Lockheed Martin Corporation, with other entities also listed as associated providers. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, under NAICS code 336413 for aerospace product and parts manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
RING, SHOULDER
Solicitation # SPE4A7-26-T-607Q
The contract pertains to the procurement of a Ring Shoulder part with part number 08-8421-102 and NSN 1650-00-289-7937 from TACTAIR FLUID CONTROLS INC, CAGE code 70236. The item is designated as a Critical Application Item and must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. All packaging must adhere to MIL-STD-129 and the DLA Packaging Requirements for Procurement (RP001), with palletization specifically mandated under those guidelines. Sampling and inspection follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; zero non-conformances are required for acceptance unless otherwise specified. The contract, issued under solicitation SPE4A7-26-T-607Q, requires delivery of 39 units within 75 days FOB origin, with inspection and acceptance occurring at the destination. The product must be marked per RQ017 and bear no government identification if rejected, under RQ011. Configuration changes require an Engineering Change Proposal, and any deviations must be formally requested. Cybersecurity compliance is mandated via CMMC Level 2 Self-Assessment, and all documentation must reflect applicable revisions under the DLA Master List, with control determined by the RFP issue date or amendment. The delivery address is DLA Distribution Depot Hill at Hill AFB, Utah, and the item must be packaged per ASTM D3951 unless superseded by higher-priority DLA standards. The original required delivery date is May 21, 2026, with a need ship date of March 10, 2026, under a firm-fixed-price contract at $39.00 per unit.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WINDOW PANEL, AIRCRAFT
Solicitation # SPE4A7-26-T-608M
The contract is for a single aircraft window panel with NSN 1560-01-187-8254, issued under solicitation SPE4A7-26-T-608M by the Department of Defense through the ASC Supplier Oper AE and AF Division. The item is a single unit but the purchase request calls for four units to be delivered within 20 days after order. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the nature of the acquisition. The supplier must comply with DLA packaging standards and adhere to configuration change management procedures, including formal approval for any deviations or waivers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The window panel contains components subject to Qualified Products Lists or Qualified Manufacturers Lists, requiring proof of qualification per procurement note H02. The item is subject to strict export control under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign nationals, regardless of location, and requiring compliance with DFARS 252.225-7048. Access to such data is restricted to DLA contractors with a certified US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and been approved by DLA. Physical identification marking is required, though Item Unique Identification is not mandated. The place of performance is Dyess Air Force Base, and all proposals must be submitted by the response deadline of August 11, 2026. The point of contact for inquiries is Jack Bolan, reachable via email or phone provided in the contract data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging, Labeling, and Kitting Services for DLA DeliveriesThe contract solicits end-to-end packaging, preservation, labeling, and kitting services for aerospace components to be delivered FOB origin in strict compliance with Defense Logistics Agency standards. All work must adhere to DLA’s technical and procedural requirements to ensure components are properly protected, identified, and assembled for military use. The services are classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 561910 designates this as a support services activity within the waste management and remediation sector, though the nature of the work clearly aligns with specialized logistics and supply chain support for defense equipment. The solicitation was posted on August 3, 2026, with a firm response deadline of September 1, 2026, and is managed by the ASC Supplier Operations AE and AF Division under the Department of Defense. While the exact place of performance and agency office details are unspecified, delivery obligation is clearly defined at FOB origin, placing responsibility for logistics planning on the contractor. The contract is accessible through the DIBBS platform, and all prospective offerors are expected to comply with federal acquisition regulations and DLA-specific documentation standards. Participation is restricted to small businesses, making this an opportunity dedicated exclusively to qualified small business entities operating in the defense logistics space.
Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

in 28 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Back Cushion (Critical Life Support Component)The contract seeks the manufacture of a critical life support component—an aircraft seat back cushion—designed to meet stringent aviation safety and durability standards for military aircraft. The product must be fire-resistant and engineered for long-term performance under extreme conditions, ensuring crew safety and compliance with military life support requirements. The solicitation is specifically set aside for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, ensuring opportunities for qualified small enterprises to compete. The North American Industry Classification System code 339920 categorizes this as the manufacturing of other miscellaneous fabricated metal products, aligning with specialized components for aerospace applications. The proposal must be submitted by September 1, 2026, with the contract awarded under the Department of Defense, specifically by the ASC SUPPLIER OPER AE AND AF DIV. While the physical location of performance is not specified, the component is intended for use in military aircraft systems, requiring adherence to exacting technical and certification benchmarks. The contract is structured as a subcontract, indicating it may be part of a larger supply chain supporting broader defense aviation programs. Participation requires full capability to deliver certified, high-reliability components without compromise to safety, durability, or regulatory compliance, with the DLA’s DIBBS platform serving as the official portal for submission and related documentation.
Sporting and Athletic Goods Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332722
New
DIBBS
STUD, PLAIN
Solicitation # SPE4A7-26-T-607H
This contract is for the procurement of 12 plain studs with NSN 5307-01-457-2738 and part number 399-84-1022, supplied by Buffalo Pumps Inc and Air & Liquid Systems Corporation, both under DLA supplier code 83130. The items are classified as critical application components and must be delivered FOB origin within 173 days of the contract award, with no variance allowed in quantity. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, California, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly follow MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and all marking must comply with MIL-STD-129 without special markings. Mercury or mercury-containing compounds are strictly prohibited in any part of the product, its packaging, preservation, or labeling, except for specific functional uses such as batteries, fluorescent lamps, sensors, and instruments defined by NAVSEA, which must include a secondary containment and be shockproof per NAVSEA 5100-003D. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated, and attributes must be classified with specified verification levels or AQLs. Technical and quality requirements referenced via R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition type. All documentation, unit of issue, and transportation details are governed by DLA procedures and referenced directives.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
CAP, LENS
Solicitation # SPE4A7-26-T-606R
The contract pertains to the procurement of a single unit of a CAP, LENS with NSN 5855-01-666-9264 under solicitation SPE4A7-26-T-606R, requiring delivery within 10 days of award with FOB origin terms and no variance in quantity. All items must comply with DLA’s packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including the specified packaging code U and absence of special marking. Sampling and inspection protocols mandate zero non-conformances per MIL-STD-1916 or ASQ H1331 unless otherwise stated, with verification levels assigned as VII, IV, and II for critical, major, and minor attributes respectively. Configuration change management and deviation requests are governed by RQ002 and RQ011, while government identification must be removed from non-accepted supplies. Delivery must be shipped via traceable freight to the designated distribution office at Camp Lejeune, NC, explicitly prohibiting parcel post. The item is required for military use, with a specified original delivery date of July 28, 2026, and all technical and quality requirements are governed by the DLA Master List referenced in RA001. The contract is subject to DoD unit of issue standards and requires compliance with all applicable engineering change procedures and quality assurance provisions.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-606X
The contract is for one unit of a SPACER, SLEEVE with NSN 5365-01-701-2568, under solicitation SPE4A7-26-T-606X, with a delivery requirement of 20 days after award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including specific mandates for physical identification and bare item marking. Compliance with MIL-STD-1916 or comparable zero-based sampling plans is required, with attributes classified as critical, major, or minor tied to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes default to major. The contractor must adhere to DLA packaging standards and remove government identification from non-accepted supplies. The product is associated with covered defense information and is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including domestic-based foreign nationals, and requiring strict compliance with DFARS 252.225-7048. Access to technical data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, with performance located in Mechanicsburg, Pennsylvania, and inquiries directed to Renee Bynum.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELECTR
Solicitation # SPE4A7-26-T-606Q
The contract is for the procurement of four units of electrical insulation tape, identified by NSN 5970015885080 and part number 3304920 from OLYMPUS AMERICA INC, with a delivery requirement of 20 days from award and a final delivery deadline of July 28, 2026. Delivery is FOB origin, with inspection and acceptance occurring at the contractor’s facility, and the unit price is not explicitly listed in Section B, though the total estimated value is inferred to be approximately $909 based on historical pricing. Packaging and preservation must strictly adhere to MIL-STD-2073-1E, with a QUP of 1, preservation method 10 (cleaning and drying only), no additional preservation or cushioning materials, and unit and intermediate containers designated as E5. All items must be marked in compliance with MIL-STD-129, including the special marking code 33 for Type II, 18-month extendable shelf life, and palletization must follow DLA’s RP001 requirements. The product is classified as a critical application item with a shelf life extension capability, and the contractor must ensure bare item marking per RQ017 and removal of government identification from non-accepted supplies within 18 months. Sampling and quality assurance are governed by MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required for acceptance unless otherwise stated, and alternative methods like MIL-STD-105/ASQ Z1.4 may be used only to determine sample size, not acceptance criteria. Critical, major, and minor attributes must be assigned verification levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. The contractor must conform to all technical and quality requirements listed in the DLA Master List and comply with the Hazard Communication Standard through proper labeling under 29 CFR 1910.1200, including disclosure of hazardous materials and submission of alternative labeling justifications prior to award. The contract incorporates multiple FAR clauses related to equal opportunity, combating human trafficking, employment eligibility verification, sustainable products, safeguarding information systems, changes, subcontracting, inspection, and default, all under deviation 2026-00038. Performance
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details