Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

WEBBING, TEXTILE

Open
SPE1C1-27-Q-0187Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE1C1-27-Q-0187 is a small business set-aside request for quotations issued by the DLA Troop Support C and T Supply Chain for the procurement of 101 yards of textile webbing under NSN 8305-00-242-6323. The required material is a plain weave, natural-colored nylon webbing with a maximum weight of 1.50 ounces per linear yard and a minimum breaking strength of 4,500 pounds. The webbing must be abrasion resistant, class R resin treated in accordance with PIA-W-27265, and conform to detailed specification MIL-DTL-4088L. Delivery is required within 120 days after order, with the FOB and inspection/acceptance points set to destination. The contractor is responsible for all inspection and testing, with the requirement that each roll, measuring between 90 and 110 yards, be labeled for fiber content per the Textile Fiber Products Identification Act. Quality assurance requires test reports and component certifications per DLA Troop Support Clothing and Textiles AQAR Revision 1, though a Certificate of Conformance is acceptable if the total award does not exceed $100,000. All invoicing and receiving reports must be processed electronically via the Wide Area WorkFlow system. Quotations must be submitted by December 1, 2026, and remain valid for 90 days.

General Info

Small business solicitation for 101 yards of specific nylon textile webbing.

NAICS

N/A

Place of Performance

375 PERRY ST BLDG 255, ROBINS AFB, GA, 31098-1672, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

Read the document

Due in 14 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 14 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → C AND T SUPPLY CHAIN
Contacts1 person available
OfficeUSA

Full Description

Show more
ITEM DESCRIPTION
WEBBING,TEXTILE
WEBBING, TEXTILE
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/ORQUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL ANDQUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THEREVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION,IN WHICH CASE THE AMENDMENT DATE CONTROLS. RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT RQ011: REMOVAL OF GOVERNMENTIDENTIFICATION FROM NON-ACCEPTED SUPPLIES INDIVIDUAL NSN DATA . NSN 8305-00-242-6323; PGC11039 . ITEM NAME: ,,WEBBING, TEXTILE PART NUMBER: ,,MIL-DTL-4088 CAGE CODE: ,,81349 . Shall be in accordance with (IAW) Detailed Specification MIL-DTL-4088L,WEBBING, TEXTILE, WOVEN NYLON dated 1 April 2021. . The webbing is for use in the manufacturing of military tentage, clothing and equipage items used by the Department of Defense. . Cloth Name: Plain Weave Design Type: Flat Weight: 1.50 ounces per linearyard maximum Breaking strength: 4,500 pounds minimum Fiber material: Nylon Color: Natural Procurement Group Code (PGC): 11039 Thickness: 0.080 inches minimum to 0.125 inches maximum Width: 1.00 inch ± 0.06 (1/16) inches; 0.94 inches minimum to 1.06inches maximum Type: XXV (25) Class: Not identified during provisioning of the NSN. Class reference. When procurement documentsreferencing this specification do not specify the class of webbing<(>,<)> any class in paragraph 1.2 of MIL-DTL-4088L may be used. See below descriptions of each class: Class 1 Shuttle loom, nylon 6,6 Class 1A Shuttleless loom, nylon 6,6 Class 2 -Shuttle or shuttleless loom, nylon 6 or nylon 6,6 Roll Length: 90 yards minimum to 110 yards maximum Special features: Environmental Protection: Abrasion resistant, class R (resin), treated in accordance with PIA-W-27265 Departure from citeddesignator:,,As modified by Special Features . The unit of issue is a Yard (YD). . Each roll of the finished webbing shall belabeled or ticketed for
fiber content in accordance with the Rules and Regulation Under the Textile Fiber Products IdentificationAct. . Identification tickets. Each roll or spool shall have a ticket attached with not finer than 5-ply cotton string doubled to not less than 6 inches long. The tickets shall be made of paperboard not less than 0.015 inch in thickness and the color shall be manila or light in intensity to permit easy reading of printed, stamped or typed markings. The use of handwritten entries isprohibited. The ticket shall have clipped corners at the end where a reinforcing patch (with or without a metal eyelet) is firmlyaffixed for attaching the tying string. The ticket shall be legibly printed with water insoluble ink with the followinginformation: -Stock number -Nomenclature -Specification number -Yardage -Contract number and date of manufacture (month and year)-Contractor's name -Name of contracting agency. .
SPE1C1-27-Q-0187
SECTION B
SUPPLY/SERVICE: PGC: 11039 CONT'D
Each roll or spool of webbing shall be labeled or ticketed for fiber content in accordance with the Rules and Regulations under the Textile Fiber Products Identification Act. . TEST REPORTS AND COMPONENTCERTIFICATIONS IN ACCORDANCE WITH DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS, Revision 1dated 1 August 2021 (superseding DPSCM-4155.3 dated 3 November 1997) ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. In lieu ofthe abovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C<(>&<)>T) Additional Quality Assurance Requirements(AQAR), Revision 1 dated August 2021. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED<(>,<)> INCLUDING APPLICABLESPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICER THROUGH MODIFICATION TO THE CONTRACT. RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLEFOR THE PERFORMANCE OF ALL INSPECTION<(>,<)> EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONSAND CONTRACT. THE GOVERNMENT RESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TOENSURE SUPPLIES AND SERVICES CONFORM TO PRESCRIBED REQUIREMENTS. . RT001: MEASURING AND TEST EQUIPMENT . 52.246-15 CERTIFICATEOF CONFORMANCE . GOVERNMENT LABORATORY TESTING OF COMPONENTS FOR ACCEPTANCE PURPOSE FOR PHYSICAL (NON-SHADE) TESTING: Onlyapplicable if the total contract award exceeds $100,000 In lieu of the abovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop SupportClothing and Textiles (C<(>&<)>T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021. . THE VENDOR SHALL NOTIFY THE DLA Product Test Center -Analytical FOURTEEN (14) CALENDAR DAYS TO THIRTY (30) CALENDAR DAYS IN ADVANCEOF
WHEN LOTS ARE TO BE PRESENTED FOR SAMPLING AT THE ADDRESS BELOW. THE CONTRACTOR'S APPROVED QUALIFIED LABORATORY WILL BEREQUIRED TO FORWARD A COMPLETED TEST REPORT FOR EACH LOT OF COMPONENTS TO THE ADDRESS BELOW. THE SUPPLIER'S SOURCE SAMPLINGREPRESENTATIVE WILL PROVIDE THE COMPLETED DD FORM 1222 dated March 2021 TO THE LABORATORY TO BE SUBMITTED WITH THE COMPLETED TESTREPORT. TEST REPORTS SHALL NOT BE OLDER THAN NINETY (90) CALENDAR DAYS. LOT NOTIFICATIONS AND SOURCE SAMPLING DD1222s/TEST REPORTS SHALL BE FORWARDED TO: Sign up to see this detail SAMPLES FOR PHYSICAL TESTING WILL ONLY BE FORWARDED UPON REQUEST TO: DLA Product TestCenter -Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 EMAIL: Sign up to see this detail NOTE: PERMIT 45 CALENDAR DAYS . Identification of Testing Sites. Unless the contract mandates a Government laboratory be used to conduct testing, the primecontractor shall identify all testing sites that will perform any test required by the terms of the contract, including end itemtesting. Any laboratory proposed by the contractor is subject to the approval of the contracting officer. Testing facilities shall be subject to on-site witnessing of testing by the Government. The use of a laboratory previously approved by the Government isnot a guarantee that testing will be performed properly, nor does it relieve a contractor from the contractual obligation topresent conforming supplies accompanied by true, accurate, and valid test results. Certification of Testing Sites. The primecontractor shall identify a technical point of contact for the testing site and provide current contact information. The primecontractor should alert the technical point of contact that the certification process has begun. A current ISO
SPE1C1-27-Q-0187
SECTION B
SUPPLY/SERVICE: PGC: 11039 CONT'D
17025 accreditation whose scope encompasses the contractual testing or equivalent will be accepted. When a testing site and its contact informationare provided to DLA Contracting and the DLA Product Specialist, the product specialist will initiate a request for the DLA Product Test Center (DLA-PTC) to certify the lab. This request will be managed via an internal DLA Troop Support process. In the absence of an appropriate ISO 17025 accreditation, the DLA-PTC will compare all required testing in the contract to the commercial labcapability. If the testing facility is new and/or unknown to the DLA-PTC, a lab certification survey (DLA Form 6005) will be provided for submission. If the DLA-PTC has a lab survey on file that is less than 3 years old, that survey will be used for theinitial NSN/Part Number: 8305-00-242-6323 Quantity: 101 YD Purchase Request: 7016243535QTY: 101 Delivery: 120 days ADO

More opportunities from Department Of Defense → C AND T SUPPLY CHAIN

Same awarding agency

Get AI-powered intelligence on this solicitation and the ones like it

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS