This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on January 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WELDER PACKAGE

Closed

W911S226U2450Federal

Submission Closed01/22/2026, 01:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E5-27-T-0229

Solicitation SPE8E5-27-T-0229 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 47 units of tungsten welding electrodes. The required items must have a 0.094 inch diameter, a length of 7 inches, and a clean finish. Technical compliance is mandated according to AWS A5.12M/A5.12-09 and quality assurance standard QAP 13873 QAP-127. The unit of issue is defined as a case of 10 each. Delivery is required FOB Origin to DLA Distribution San Joaquin in Tracy, California, with an original required delivery date of March 12, 2027, and a need ship date of April 12, 2027. Inspection and acceptance will occur at the destination. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American Act compliance, and the use of the Wide Area WorkFlow system for electronic invoicing and payment.

POSTED

DEADLINE

ELECTRODE, CUTTING, SOLI

Solicitation # SPE8E5-27-T-0194

Solicitation SPE8E5-27-T-0194 is a request for quotations issued by DLA Troop Support, Construction and Equipment for the procurement of 22 boxes of solid cutting electrodes, identified by NSN 3439014118393 and Broco Inc part number PC/1418-100. Each box contains 137 units. The procurement is categorized under NAICS 333992 and requires delivery to DLA Distribution Red River in Texarkana, Texas. The required delivery date is April 21, 2027, with a need ship date of April 12, 2027, and a delivery window of 167 days. Shipping terms are FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001. Non-hazardous materials must follow ASTM D3951, while hazardous materials require packaging per TQ requirement IP025 and labeling according to the Hazard Communication Standard. Technical and quality requirements are governed by the DLA Master List. Administratively, the contractor must use the Wide Area Workflow system for electronic invoicing and payment requests. Compliance with the Buy American Act, Berry Amendment, and NIST SP 800-171 cybersecurity standards is required. All quotes must be submitted via the DIBBS portal.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

BRAZING ALLOY, NICKEL

Solicitation # SPE8E6-27-T-0281

Solicitation SPE8E6-27-T-0281 is a fixed-price request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of nickel brazing alloy in powder form. The requirement consists of 11 units, with each unit defined as 5 lbs, under NSN 3439002568239. The material must strictly adhere to technical standard SAE AMS477K Revision K dated October 1, 2023. Delivery is required within 167 days after order, with a need ship date of April 12, 2027, and a final required delivery date of June 14, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. The contract mandates rigorous compliance with DLA packaging and marking standards, specifically MIL-STD-129 and RP001. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with FED-STD-313 and TQ requirement IP025. Key administrative and security requirements include a CMMC Level 2 Self-Assessment, safeguarding of covered defense information, and adherence to the Buy American Act and Berry Amendment. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DIBBS portal, and payment will be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Draft Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services

Solicitation # W91CRB-27-R-A002

Solicitation W91CRB-27-R-A002 is an indefinite-quantity request for non-personal welding, machining, painting, and fabrication support services for the U.S. Army Aberdeen Test Center at Aberdeen Proving Ground, Maryland. The scope of work includes fabrication and finishing, powder coating, painting of buildings and equipment, and the production of signage and insignia to support various cores such as Automotive, Live Fire, and Warfighter. The contract is a total small business set-aside under NAICS 333992, with an estimated total value of 5,000,000 dollars. The period of performance consists of a 45-day phase-in, a 57-month ordering period running from approximately December 2026 through December 2031, and a 45-day phase-out. Award will be based on the Lowest Price Technically Acceptable (LPTA) process, requiring an acceptable rating in both technical and past performance factors. The pricing structure utilizes a mix of Time and Materials (T&M) and Firm Fixed Price (FFP) task orders. Contractor performance will be monitored via a Quality Assurance Surveillance Plan, and all invoicing must be processed through the Wide Area WorkFlow system. Key requirements include the management of Government Furnished Property, adherence to strict labor qualifications and certifications, and the submission of a comprehensive proposal consisting of four volumes, including technical approach, past performance, price, and required certifications.

POSTED

DEADLINE

MIL-DTL-19933F, Electrodes and Rods - Welding, Bare, Chromium and Chromium-Nickel Steels

Solicitation # N0002426SN-70

POSTED

DEADLINE

Welders and Guns for Hammond Bids must be for exact items. NO SUBSTITUTIONS

Solicitation # 40023-S27005

Solicitation 40023-S27005 is an invitation for bids issued by Northshore Technical Community College for the procurement of specific welding machinery and accessories for the Hammond Campus. This is a proprietary, brand-name-only bid that strictly prohibits substitutions. The required items include three 12 FT to 7 FT M Connector Cables (K2910-2), ten Magnum Pro 250L Welding Guns (K4874-2), three Magnum Pro 15 FT push/pull guns (K4797-1), and two Power Wave 300C Advanced Education One Paks (K4934-1). Bids must be submitted by November 16, 2026, at 11:00 AM via post or email to Richard Butler. The contract is governed by Louisiana state laws and purchasing regulations, including L.R.S. 39:1551–1736, and allows for preferences for products manufactured or assembled in Louisiana. Awardees must provide complete pricing, including prepaid transportation to the destination, with prices remaining firm for at least 30 days. Delivery cannot occur before July 1, 2026. Payment will be made within 30 days of delivery or invoice receipt via electronic funds transfer, LaCARTE card, or check. The agreement may be extended for two additional 12-month periods, not to exceed a total term of 36 months, and the college reserves the right to cancel the contract with 30 days' written notice.

- Comm/Tech College - Northshore Technical Community College

POSTED

DEADLINE

Welders and Guns for Livingston Bids must be for exact items. NO SUBSTITUTIONS

Solicitation # 40023-S27006

Solicitation 40023-S27006 is an invitation for bids issued by Northshore Technical Community College for the procurement of specific welding machinery and equipment to be delivered to the Walker Campus. This is a proprietary, brand-name-only solicitation where no substitutions are accepted. The required items include a Keen K-200 Rod Oven, Wilton Mechanics Pro Vices, Lincoln Power Mig and Power Wave units, connector cables, Magnum Pro push-pull guns, and a Victor cutting machine. Bids must be submitted by November 16, 2026, at 11:00 AM via post or email to the Lacombe STEM Campus. The contract is governed by Louisiana state laws, including L.R.S. 39:1551–1736, and allows for preferences for products manufactured or assembled in Louisiana. Award may be made on an all-or-none, grouped, or separate item basis. Bid prices must include prepaid transportation to the destination and remain firm for at least 30 days. Delivery cannot occur before July 1, 2026. Payment will be processed within 30 days of delivery or invoice via EFT, LaCARTE card, or check, using FY 27 funds. The agreement may be extended for two additional 12-month periods, not to exceed a total term of 36 months, and the college retains the right to cancel the contract with 30 days' written notice.

- Comm/Tech College - Northshore Technical Community College

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-0537

Solicitation SPE7M1-27-T-0537 is a fixed-price request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 22 power transformers. The required items are identified as critical application items, specifically Gas Equipment Engineering 96101 part number 42-1338, under NSN 5950-00-613-4285. The original required delivery date is May 9, 2028, with a need ship date of April 6, 2027. Delivery is set for FOB Origin, with inspection and acceptance occurring at the destination, the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with a specific requirement for delicate instrument labeling. Compliance with NAVSEA 5100-003D is required to ensure no mercury or mercury-containing compounds are intentionally added to the hardware. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Offerors must submit quotes via the DIBBS portal and comply with various federal regulations, including the Buy American Act, DFARS cybersecurity standards for safeguarding covered defense information, and prohibitions on acquiring certain services from Russia.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1330

Solicitation SPE7M1-27-T-1330 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 4,262 feet of wire braid, identified as NSN 6145001705274 and part number C2-0083. This is a critical application item classified as Commercial Off The Shelf (COTS). The material must be provided in continuous lengths of 100 feet per spool. Delivery is required within 168 days after receipt of order, with a need ship date of April 20, 2027, and a final required delivery date of May 7, 2027. Shipping is FOB Origin to DLA Distribution Warner Robins in Georgia. The contract mandates strict adherence to technical and quality requirements, including MIL-DTL-12000 for cable and wire preservation and MIL-STD-129 for marking. Packaging must comply with MIL-STD-2073-1E and RP001 DLA packaging requirements. A critical restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. Inspection and acceptance will occur at the destination. Offerors must submit quotes via the DIBBS portal and comply with the Buy American Act and Berry Amendment. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M1-27-T-1368

Solicitation SPE7M1-27-T-1368 is a fixed-price procurement issued by the DLA Weapons Support Maritime Supply Chain for six power transformers, specifically Abbott Technologies, Inc part number 80P433CT. This critical application item must be delivered in accordance with TDP Rev A Gen 1. The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of March 31, 2027, and a need ship date of April 20, 2027. Shipping is based on FOB Origin, and the delivery timeframe is specified as 168 days after receipt of order. Quality assurance is stringent, requiring destination inspection and acceptance. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with acceptance based on zero non-conformances. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific prohibitions against the intentional addition of mercury except in approved functional cases. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, cybersecurity reporting under DFARS 252.204-7012, and NIST SP 800-171 assessment requirements.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0284

Solicitation SPE8E5-27-T-0284 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one welding nozzle, identified by NSN 3431-01-425-0919. The requirement is not a small business set-aside and falls under NAICS code 333992. The item is to be delivered FOB Origin to Camp Humphreys in Pyeongtaek, South Korea, with a required delivery timeline of 20 days after award. Both inspection and acceptance will occur at the destination, governed by FAR 52.246-1. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and requires compliance with RP001 for palletization. Technical and quality requirements are governed by the DLA Master List, and the contractor must ensure that mercury is not intentionally added to the hardware. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American and Balance of Payments Program, the Berry Amendment, and specific representations regarding covered telecommunications equipment under FAR 52.204-24 and DFARS 252.204-7016.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E6-27-T-0319

Solicitation SPE8E6-27-T-0319 is a request for quotations for the procurement of welding rods made of nickel alloy, specifically part number AMS5798-1-16. The material specifications require a diameter of 0.062 inches and a length of 36 inches, adhering to SAE AMS5798J Revision J. The requirement consists of 13 units of issue, where one unit is defined as 10 pounds. The delivery is scheduled for 110 days after order, with a need ship date of February 21, 2027, and a required delivery date of February 24, 2027. Shipping is FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and RP001. Hazardous materials must be packaged per TQ requirement IP025 and FED-STD-313, while non-hazardous materials follow ASTM D3951. Inspection and acceptance will occur at the destination. This is not a small business set-aside, though HUBZone preferences apply. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Invoicing and receiving reports must be processed through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

7 days ago

DEADLINE

in 5 days

AI Contract Overview

The contract involves the provision of a comprehensive MIG Welder Package meeting detailed specifications suited for industrial welding applications. The system must comply with OSHA standards and be fully compatible across all components, including a power supply capable of continuous operation at 36 volts and 400 amps, and compatibility with 480-volt, 3-phase power. It must support multiple welding processes such as Shielded Metal Arc Welding, DC Gas Tungsten Arc Welding with high-frequency and lift arc start, Gas Metal Arc Welding, Pulse Gas Metal Arc Welding, and Flux Core Arc Welding. The wire feeder is specified as a dual-wire setup with a minimum duty cycle of 100% at 100 volts/600 amps, including spool covers for 33lb wire spools, dual 15-foot, 300 amp MIG gun assemblies compatible with "Miller style" power pins, along with necessary cables, feed roll kits in multiple sizes, and corresponding wire guides. Additional equipment requirements include a wireless remote foot controller with supplied AA batteries, a heavy-duty foot control pedal with a 20-foot cord, two shield gas flow meter regulators, two gas hoses, and a removable cooler for maintenance. The system must offer dedicated connections for TIG torch, TIG gas hose, TIG remote, Stick welding, and work cable. It should come with running gear or a cart equipped with brackets to securely stow foot controls and include a minimum 25-foot work lead. The contract is posted by the Department of Defense, specifically the W6QM Micc-ft Drum office at Fort Drum, NY, and is a total small business set-aside under NAICS code 333992. Proposals are due by January 22, 2026, and the primary point of contact is Charlie Snell.

General Info

Provision of OSHA-compliant MIG Welder Package with multi-process support, dual-wire feeder, and accessories.

Agency

Department Of Defense → W6QM Micc-Ft Drum

NAICS

333992 - Welding and Soldering Equipment Manufacturing

Place of Performance

1 C TREE RD BLDG 1041 MCALESTER OK 74501, NY, 74501

Set-Aside

SBA

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJan 15

Combined Synopsis

Response DeadlineJan 22

Deadline has passed

Submission Closed

01/22/2026, 01:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Charlie Snell

contact@example.gov

+1 (555) 000-0000

Full Description

MIG WELDER PACKAGE 3) General RequirementsThis section provides the specification requirements for the Welding Machine Package. Note: Every item listed in this section shall be accounted for in the offeror?s proposal for it to be considered (see section 6.).a) System shall meet all applicable OSHA standards and regulations.b) Vendor Shall ensure All Components of the system are compatible. c) Power supply shall have a minimum duty cycle of 100% at 36volts/400 amps.d) Machine Shall be compatible with 480-volt 3 phase power.e) System Shall be able to do the following processes,1. Shielded Metal Arc Welding (SMAW)2. Direct Current Gas Tungsten Arc Welding (DC GTAW)a. High Frequency Startb. Lift Arc3. Gas Metal Arc Welding (GMAW)4. Pulse Gas Metal Arc Welding (GMAW-P)5. Flux Core Arc Welding (FCAW)f) The wire feeder shall be a dual wire setup.1. The Wire feeder shall have a minimum duty cycle of 100% at 100 volts/600 amps.2. The Wire feeder Shall include spool covers for 33lb wire spools.3. The Wire feeder Shall include 2, 15ft (min) 300amp Mig gun assemblies.4. The Wire feeder Shall be compatible with ?Miller style? power pins on the Mig gun assemblies.5. Wire feeder control cable and weld power cable Shall be included.6. 25 ft work sense lead shall be included.7. Vendor Shall include Feeder drive roll kits of the following sizes (Dual size reversable are acceptable).a. .035 V-Grooveb. .045 V-Groovec. .062 V-Groove8. Vendor Shall include Wire Guides of the following sizes.a. .035b. .045c. .062g) System Shall include a wireless remote foot controller.1. Wireless foot control Shall accept ?AA? size batteries.2. Vendor Shall provide batteries to fill the controller not less than 2 times.h) System Shall include a heavy-duty foot control pedal with 20ft of cord.i) System Shall Include 2 Sheild Gas Flow meter regulators.j) System Shall include 2 gas hoses (4ft min).k) Machine must include a cooler.1. Cooler must be removeable for service/repair.l) Machine must have dedicated Tig Torch Connection.m) Machine must have dedicated Tig Gas hose Connection.n) Machine must have dedicated Tig Remote Connection.o) Machine must have dedicated Stick Connection.p) Machine must have dedicated Work cable Connection.q) Running Gear/Cart Shall be included.1. 2 brackets to stow the foot controls Shall be included.r) 25 ft(min) Work Lead Shall be included.