Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Welding Rods and Electrodes Supplier

Active

Federal

Response Deadline10/09/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the supply of welding rods and electrodes for prime contractors on U.S. Navy projects. The supplier is responsible for manufacturing or sourcing materials that adhere to federal, military, and commercial specifications, including the requirement to apply specific type designations or classification numbers to electrode coverings within 2.5 inches of the top end. The contractor must ensure full compliance with Buy American and Trade Agreements Act certifications. All delivered electrodes must be properly marked, packaged, and accompanied by quality control and origin certifications. The solicitation was posted on September 25, 2026, with a response deadline of October 9, 2026, under NAICS code 334419.

General Info

DoD subcontract for supplying certified welding rods and electrodes for U.S. Navy projects.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

334419 - Other Electronic Component Manufacturing

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010426QFG33.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

ROD, WELDING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 25

subcontract

Response DeadlineOct 9

Submission deadline

Response Deadline

10/09/2026, 08:30:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies welding rods and electrodes for prime contractors on U.S. Navy NAVSUP WSS projects. Manufactures or sources rods meeting federal, military, and commercial specifications, applying type designations or classification numbers to electrode coverings within 2.5 inches from the top end. Ensures compliance with Buy American and TAA certifications. Delivers marked and packaged electrodes with quality control and origin certifications.

Similar Contracts

Same NAICS industry code

Pulse Oscillator Manufacturing and Supply

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

58--NRP,MODULE,ACOUSTIC - AND OTHER REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QNF39

This presolicitation notice, issued by the Department of Defense under solicitation number N0010426QNF39, is for the procurement of four acoustic modules (NSN 7H-5845-016271502) to be delivered to Lockheed Martin Corporation in Manassas, Virginia. The government intends to solicit and negotiate with a single source under FAR 6.302-1 because it does not own the necessary data rights for the part, and it has been determined that purchasing those rights or reverse engineering the component is uneconomical. Interested parties may submit proposals, quotations, or capability statements within 45 days of the publication date, or 30 days if an existing Basic Ordering Agreement is used. While the government is not currently utilizing FAR Part 12 for commercial item acquisition, vendors may notify the contracting officer of their ability to provide a commercial item within 15 days. Technical specifications and standards can be obtained through the DoD Single Stock Point or the ASSIST-Online portal.

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

in about 1 month

70--CONVERTER,ANALOG TO

Solicitation # SPRPA126RVC74

This presolicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of nine analog to digital converters under solicitation number SPRPA126RVC74. The delivery terms are set as FOB Origin, and the response deadline for this opportunity is November 10, 2026. Due to the specific nature of the components, the parts must be acquired or repaired by sources specified on a source control or selected item drawing per DoD-STD-100. The government does not possess the necessary technical data or manufacturing rights to allow for alternative sources or qualification testing of other parts, meaning the acquisition is restricted to approved sources.

Pa DLA Aviation At Philadelphia

POSTED

about 14 hours ago

DEADLINE

in about 2 months

OSCILLATOR,PULSE DE

Solicitation # N0010425QQC79

This contract is a fixed-price solicitation issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, for the repair of the OSCILLATOR,PULSE DE with a required Repair Turnaround Time (RTAT) of 365 days from the physical receipt of the asset at the contractor’s facility as logged in the Commercial Asset Visibility (CAV) system. All repairs must adhere to the original manufacturer’s specifications, technical orders, and drawings, with strict compliance to MIL-STD-130 for item marking and MIL-STD-2073-1 for packaging, preservation, and palletization in accordance with designated levels for CONUS and OCONUS shipments. The contract mandates Government Source Inspection (GSI), and final acceptance requires formal validation by a Quality Assurance Representative through the Wide Area Workflow system using the DD250 Receiving Report. All freight is FOB Origin, and delivery must be handled per the CAV Statement of Work, with contractors responsible for accurate, timed reporting of asset receipt and all transaction data. The government may exercise an option within 365 days to increase quantities at the same unit price, and any contractor delay beyond the RTAT incurs a per-unit monthly price reduction, up to a maximum amount, without limiting the government’s right to terminate for default. Contractors must be authorized distributors of the original manufacturer’s item and provide proof of authorization with their offer. Pricing must be firm and include all costs related to repairing unwhole, damaged, or missing parts. Offerors are required to submit the quote amount and RTAT, and if unable to meet the 365-day requirement, must disclose their capacity constraints. The contract includes FAR clauses related to the System for Award Management, Buy American-Balance of Payments Program, prohibition on inverted domestic corporations, cybersecurity maturity model compliance, combating trafficking in persons, and changes under fixed-price terms. Packaging must comply with MIL-STD-129 for labeling, including mandatory DLR labels and SMIC markings in color-coded text, and all wood packaging must meet ISPM-15 standards with approved marks. The contractor is responsible for maintaining complete inspection records for 365 days after delivery, and any item determined beyond economic repair may be eligible for a negotiated, not-to-exceed fee for evaluation costs. Proposals must be submitted electronically by the deadline of May 8, 2026, and include UEI and CAGE codes, with socioeconomic representations required under applicable clauses. The solicitation emphasizes

Navsup Weapon Systems Support Mech

POSTED

about 14 hours ago

DEADLINE

Booth Electrical and HVAC Component SupplyThis subcontract for the California Department of Corrections and Rehabilitation involves the supply of specialized electrical and HVAC components for CDCR booth projects. The provider is responsible for delivering component kits to booth fabricators, which must include exhaust fans with a minimum of 55 CFM, 16-gauge air transfer grilles, and recessed LED lighting arrays with a minimum 80 CRI. All lighting must feature 15/32 monolithic polycarbonate security lenses and exterior toggle switches to ensure they meet security-grade specifications for correctional environments. The solicitation is listed under NAICS code 334419 and was posted on September 25, 2026, with a response deadline of October 27, 2026. This agreement focuses on providing high-durability materials that adhere to strict security standards for use by prime contractors in the construction of correctional facility booths.

California Department of Corrections & Rehabilitation

POSTED

DEADLINE

in about 1 month

Supply of HVAC Bridge Rectifiers

Drc210200 Belmont Correctional Inst Beci

POSTED

DEADLINE

HVCA KBPC3506 Bridge Rectifier, Single Phase, 600V, 35A, Through Hole, KBPC Series MFR Part #: KBPC3506

Solicitation # SRC0000042113

Solicitation SRC0000042113 is issued by the State of Ohio for the Belmont Correctional Institution to procure 24 units of HVAC KBPC3506 Bridge Rectifiers. These components must be single phase, 600V, 35A, through hole, and part of the KBPC series with manufacturer part number KBPC3506. The procurement also includes a single line item for shipping and freight costs. All bids and inquiries must be submitted through the OhioBuys Supplier Portal, with a response deadline of October 9, 2026. Offerors are required to follow the instructions provided in the RFQ documents and use the OhioBuys system for all communications and documentation submissions. Technical support for the portal is available via designated phone lines, and Chrome is the recommended browser for submission to avoid system errors.

Drc210200 Belmont Correctional Inst Beci

POSTED

DEADLINE

Supplier of Electronic Component NSN 5930-01-122-2288This subcontract through the Department of Defense Active Devices Division requires the sourcing and supply of six units of electronic component NSN 5930-01-122-2288 for prime contractors supporting DLA supply contracts. The supplier must ensure all materials are packaged according to MIL-STD-2073-1E and marked per MIL-STD-129, with HazMat labeling strictly conforming to 29 CFR 1910.1200 and Federal Standard No. 313. Eligible bidders must maintain an active SAM registration and operate under NAICS code 334419. The performance location is specified as New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of October 5, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Fixed Paper Dielectric CapacitorsThis subcontract through the Department of Defense Active Devices Division involves the supply of 34 fixed paper dielectric capacitors for prime contractors on DLA supply contracts. The required components must be part number CA37KFW104, identified by NSN 5910-00-882-0556, and must adhere to MIL-C-12889 and Critical Application Item quality standards. Suppliers are also required to provide complete data packages to facilitate alternate part evaluations. The procurement is categorized under NAICS code 334419 and is designated for performance at Tinker AFB. The solicitation was posted on September 24, 2026, with a response deadline of October 5, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Thyratron Electron TubesThis subcontract with the Department of Defense Active Devices Division involves the manufacture or procurement of 16 thyratron electron tubes under NSN 5960000113658. The contractor is responsible for providing these critical application items to prime contractors, ensuring all components are preserved and packaged in strict accordance with MIL-DTL-75 standards. Special marking requirements including Fragile, Arrow Up, and Glass must be applied to all units. The performance of this contract is centered at Robins Air Force Base, with a response deadline of October 5, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supplier of Toggle Switches (NSN 5930-01-024-2827)This subcontract involves the sourcing and manufacture of 25 toggle switches identified by NSN 5930010242827 for prime contractors supporting Department of Defense supply contracts. The supplier must ensure that all components are free of Hexavalent Chromium in accordance with DFARS 252.223-7008 and must strictly adhere to DLA Packaging Requirements RP001 and the Master List of Technical and Quality Requirements RA001. The finished electronic components are to be delivered to the government freight address in Tracy, California. This opportunity is managed by the Electrical Devices Division and falls under NAICS code 334419, with a response deadline of October 5, 2026.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Supply of Push Switches (NSN 5930-01-537-7174)This subcontract, issued by the Department of Defense Electrical Devices Division, requires the manufacture and testing of 13 push switches under NSN 5930-01-537-7174. The work must be performed in accordance with source-controlled limited rights data, with sampling and packaging adhering to MIL-STD-1916 or ASQ H1331 and MIL-STD-129 standards respectively. The contract is a total small business set-aside under NAICS code 334419, with performance located in New Cumberland, Pennsylvania. The selected provider must maintain ITAR and EAR compliance, hold US/Canada Joint Certification Program certification, and possess DLA technical data authorization. The final deliverable consists of 13 packaged push switches supplied to prime contractors for DLA Land and Maritime contracts. The response deadline for this opportunity is October 5, 2026.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Supply of Seat and Piston (NSN 4820-01-612-7510)

POSTED

about 14 hours ago

DEADLINE

Critical Safety Item (CSI) Cable Assembly FabricationThis subcontract for Critical Safety Item Cable Assembly Fabrication involves the manufacture and supply of specialized cable assemblies for prime contractors on U.S. Navy shipboard projects. The work requires fabrication according to TDP versions 004, 008, and 009, adhering to Special Emphasis Level I quality protocols. Compliance is ensured through First Article Testing per DI-NDTI-80809B and the implementation of Inspection and Test Plans per DI-QCIC-81110. The contract is managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, with a NAICS code of 335999. Deliverables include certified cable assemblies and associated data reports, with a requirement for PKI Digital Certificates for ECDS submissions. The response deadline for this opportunity is October 23, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solenoid Valve Replacement Parts SupplyThis subcontract involves the supply of internal components, seals, coils, and hardware required for the repair of Solenoid Valves under NSN 4810-01-206-3288 for Department of Defense projects. The provider is responsible for sourcing and delivering either OEM or approved equivalent replacement parts, which may be supplied as individual components or as complete replacement part kits to the designated repair facility. To ensure compliance with federal regulations, the provider must provide certification of origin meeting the Buy American and Balance of Payments Program requirements. This effort is managed by the Navsup Weapon Systems Support Mech under NAICS code 332999, with a response deadline set for October 16, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solenoid Valve Repair and Technical ServicesThis subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the technical repair and modification of seven solenoid valves for prime contractors. The scope of work includes the teardown and evaluation of valves under NIIN 012063288 to identify failure points, followed by repairs executed to original manufacturer standards. All work must be verified through quality assurance testing using precision equipment and in accordance with manufacturer drawings. The project requires strict compliance with Buy American and DFARS 252.225-7000 regulations. The final deliverable consists of seven repaired and certified solenoid valves. This effort falls under NAICS code 811212 and was posted on September 25, 2026, with a response deadline of October 16, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

about 14 hours ago

DEADLINE

Supply of High-Precision Connectors and O-Rings for Naval CablesThis subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the supply of high-tolerance connectors and O-rings for US Navy shipboard cable projects. The provider is responsible for delivering components that meet the exact dimensions for O-ring surface diameter readings as specified in the Technical Data Package. A critical requirement of the contract is the provision of material certifications, which allow the prime contractor to issue Level I Certificates of Compliance. The project falls under NAICS code 334413 and requires the delivery of fully certified hardware to ensure naval standards are met.

Semiconductor and Related Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Manufacture of Critical Safety Item (CSI) Cable AssembliesThis subcontract with the Department of Defense involves the manufacture of high-specification Critical Safety Item cable assemblies for US Navy shipboard system projects. The provider is responsible for fabricating assemblies according to Technical Data Package versions, executing formal Inspection and Test Plans per DI-QCIC-81110, and performing First Article Inspections. Technical requirements include the use of precision measurement tools for O-ring diameter verification and the use of ECDS for data delivery. To qualify, the provider must hold CSI and Special Emphasis Level I certifications. The final deliverables consist of finished cable assemblies accompanied by signed Certificates of Compliance. This opportunity is categorized under NAICS code 334418 and is managed by the Navsup Weapon Systems Support Mech.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 14 hours ago

DEADLINE

Military Packaging, Preservation, and Marking Services

Packing and Crating

POSTED

about 14 hours ago

DEADLINE

Specialized Electronic Component SupplyThis subcontract with the Department of Defense, specifically Navsup Weapon Systems Support Mech, involves the supply of critical electronic components, circuit boards, and precision parts. These materials are intended for prime contractors working on Department of the Navy calibrator repair projects, with a specific requirement to deliver replacement parts for NIIN 016119298 to the designated repair facility. The contract falls under NAICS code 334413 and mandates strict adherence to the Buy American Act and FAR 25.105. The supplier must source domestic end products or components from qualifying countries and provide formal certification of the domestic status of all supplied end products. The response deadline for this opportunity is October 16, 2026.

Semiconductor and Related Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Multifunction Calibrator Repair and CertificationThis subcontract involves the repair and overhaul of two Multifunction Calibrators (NIIN: 016119298) for prime contractors supporting Department of the Navy projects. The selected provider must perform all work in accordance with technical orders, drawings, and approved repair standards, utilizing precision calibration test equipment to ensure the units meet original specifications. The scope of work includes comprehensive quality assurance and verification to certify that the equipment is fully functional. This requirement is managed under the Department of Defense via Navsup Weapon Systems Support Mech, with a response deadline of October 16, 2026, and falls under NAICS code 811210.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 14 hours ago

DEADLINE

Control-Indicator Replacement Parts SupplyThis subcontract, titled Control-Indicator Replacement Parts Supply, involves the procurement of internal components, seals, and electronic elements to support repairs for Control-Indicator NIIN 014844097. The project is managed by the Navsup Weapon Systems Support Mech under the Department of Defense and requires all parts to be manufactured or sourced according to Technical Data Package Version O08 to meet Condition Stock TP: A specifications. The supplier is responsible for delivering individual replacement parts or kits while ensuring full compliance with the Buy American and Trade Agreements Act. This opportunity falls under NAICS code 334290, with a response deadline of October 23, 2026.

Other Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Control-Indicator Repair and OverhaulThis subcontract, titled Control-Indicator Repair and Overhaul, involves the repair and overhaul of Control-Indicators (NIIN: 014844097) for prime contractors supporting DLA Distribution projects. The scope of work includes inspecting and testing components according to original manufacturer drawings, specifications, standard repair manuals, and technical orders. The contractor must use specialized testing equipment to validate functional requirements and ensure all deliverables meet Condition Stock TP: A quality standards. The project is managed by the Department of Defense under the Navsup Weapon Systems Support Mech agency, falling under NAICS code 336413. The solicitation was posted on September 25, 2026, with a response deadline of October 23, 2026. The final objective is the delivery of fully repaired, tested, and certified Control-Indicators.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS