Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Wheel Well Stands

Awarded

FA8125-26-P-0049Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for Wheel Well Stands under solicitation number FA8125-26-P-0049, awarded as a Total Small Business Set-Aside in accordance with FAR 19.5, ensuring only small businesses are eligible to compete. The North American Industry Classification System code is 332312, indicating the work falls under the fabrication of structural metal products. The award notice was posted on June 9, 2026, and is managed by the Department of Defense through the office FA8125 Afsc Pzima, located at Tinker AFB, Oklahoma, with a zip code of 73145-3303. The primary place of performance is in S Coffeyville, Oklahoma, also under the same zip code, indicating delivery or service will occur at that location. Point of contact for inquiries includes Sondra Groth as the primary representative and Sheridan Robison as secondary, both reachable via their official Air Force email addresses. Further details and bid submission information can be accessed through the SAM.gov workspace link provided.

General Info

Small business set-aside for Wheel Well Stands in Coffeyville, Oklahoma, awarded under FA8125-26-P-0049.

Agency

Department Of Defense → FA8125 Afsc Pzima

Contract Value

$57,635

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

S Coffeyville, OK, 73145, USA

Set-Aside

SBA

Awardee

Award Issued Date

06/01/2026, 12:00:00 AM UTC

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded

PostedJun 9

Award Notice

AwardedJun 1

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8125 Afsc Pzima

Contacts2 people available

OfficeTINKER AFB, OK, 73145-3303, USA

Organization / AgencyDepartment Of Defense → FA8125 Afsc Pzima

Office AddressTINKER AFB, OK, 73145-3303, USA

Contacts

Sondra Groth

contact@example.gov

Sheridan Robison

contact@example.gov

Full Description

Show more

https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=2251a4ceee694580993d408ac61a1d9b

Similar Contracts

Same NAICS industry code

ACE-1199-1386-00 Tower Design and Fabrication for Various RCAG/RTR Sites (ADM, DPA, ONL, and RWF)

Solicitation # ace-1199-1386-00-tower-design-fabrication-various-rcagrtr-sites-adm-dpa-onl-rwf

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Oklahoma, Illinois, Nebraska, and Minnesota, specifically serving the ADM, DPA, ONL, and RWF locations. This project falls under NAICS code 332312 and requires that the selected offeror be fully bonded and insured to perform the work. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 2, 2026. The primary point of contact for this solicitation is Thomas Sheehan.

Parsons Corporation

POSTED

about 5 hours ago

DEADLINE

Solicitation # SPE7M0-27-T-0724

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A6-27-T-7135

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Tunnel Liner Plate Material Supplier

Dot084500 Capital Program Administration Dotd8, Dot-dept Of Transportation

POSTED

about 13 hours ago

DEADLINE

Integrated Water Tank and Storage FabricationThis subcontract involves the fabrication and supply of integrated water tank and fuel storage assemblies for prime contractors supporting DLA Troop Support projects. The scope of work requires the manufacture of an insulated potable water tank with a minimum capacity of 80 gallons, featuring an integrated storage rack capable of holding at least five 5-gallon fuel cans. The selected provider is responsible for the delivery of the fully installed assembly. The project is categorized under NAICS code 332312 and will be performed in Natick. Interested parties must adhere to the response deadline of November 4, 2026. This effort is managed under the Department of Defense for the DLA Troop Support agency.

DLA Troop Support

POSTED

about 16 hours ago

DEADLINE

Tactical Chassis FabricationThe Tactical Chassis Fabrication subcontract, issued by the Department of Defense under agency W6QK Acc-Apg, involves the production of lightweight and ruggedized housing and chassis for aircraft interior decontamination projects. These components are designed for the Joint Project Manager for CBRN Special Operations Forces and must be manufactured using composite materials and lightweight alloys. Each enclosure is required to fit within a 42 by 18 by 18 inch envelope and maintain a total weight of 150 pounds or less. To ensure operational viability, all deliverables must adhere to MIL-STD-1472 human engineering and lift requirements, resulting in a transportable chassis with integrated stowage. The project is categorized under NAICS code 332312 and will be performed in Abell. Interested parties must submit their responses by the deadline of November 24, 2026.

POSTED

about 16 hours ago

DEADLINE

Steel and Other Metal Materials for the Marietta Repair Station: Stamford De-Watering Box Material PH 1

Solicitation # W9123727QA011

Solicitation W9123727QA011 is a firm-fixed price commercial supply contract issued by the US Army Corps of Engineers, Huntington District, for the procurement of various steel and metal materials to support the Stamford De-Watering Box project at the Marietta Repair Station in Ohio. This procurement is a 100 percent small business set-aside under NAICS code 332312. The required materials include a wide array of ASTM standard products, specifically ASTM 1018 CR round bars, ASTM A434 CL bc, ASTM A53 seamless pipe, ASTM 1026 seamless tubing, ASTM A36 plates and bars, ASTM A709 Gr 50 plates, T-beams, and flat bars, as well as ASTM A325 fasteners. Specialized fabrication is required for certain ASTM 709 Gr 50 plates, including 1/8 inch tolerances and 45-degree double bevels as specified in the technical drawings. The selected vendor is responsible for arranging shipping to the Marietta Repair Station, with the government handling the unloading of materials upon arrival. All deliveries must be completed within eight weeks of the award date and must be accompanied by traceable mill certifications and testing reports. To be eligible for award, firms must be registered in the System for Award Management and comply with DFARS clauses 252.225-7001 and 252.225-7002 regarding the Buy American and Balance of Payments Program and Qualifying Country Sources as Subcontractors. The contract will be awarded using simplified acquisition procedures, and final invoicing is to be submitted via email once all materials are delivered onsite.

W072 Endist Huntington

POSTED

about 16 hours ago

DEADLINE

in about 16 hours

Solicitation # SPE8EF-27-T-0145

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 16 hours ago

DEADLINE

Environmental Control Work Booth/ Sanding Booth.

Solicitation # FA480027Q0005

FA4800 633 Cons Pkp

POSTED

about 16 hours ago

DEADLINE

Purchase of 2 or 3 Temporary Road Bridges

Solicitation # 12444627Q0004

Csa East 7 Usda-Fs

POSTED

about 16 hours ago

DEADLINE

Steel Embedded Items and Lintel SupplyThis subcontract for Steel Embedded Items and Lintel Supply involves providing essential steel components for Harford County Public Schools facility projects. The selected vendor will be responsible for furnishing and delivering anchor bolts, leveling plates, steel lintels, base plates, bearing plates, sleeves, angles, and channels directly to the jobsite. All supplied materials must strictly comply with the Buy American Steel Act, and the scope of work is limited to supply and delivery, as installation will be handled by other trades. The opportunity is categorized under NAICS code 332312 and is managed by the state of Maryland. Interested parties should note the tight response window, with the solicitation posted on October 26, 2026, and the deadline for responses set for October 29, 2026.

Harford County Public Schools

POSTED

DEADLINE

Miscellaneous Metals and StairsThis subcontract for Miscellaneous Metals and Stairs involves the fabrication and installation of secondary metal elements for prime contractors working on Harford County Public Schools facility projects. The scope of work specifically includes the delivery and installation of metal pan stairs, grating stairs, interior and exterior pipe and tube railings, and various miscellaneous metal supports. A critical requirement for this contract is the provision of a Maryland Professional Engineer for the delegated design of all stairs, handrails, ladders, and guardrails. Interested parties should note the response deadline of October 29, 2026, for this Maryland-based project.

Harford County Public Schools

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8125 Afsc Pzima

Same awarding agency

Workstation PC Supplier

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 16 hours ago

DEADLINE

Fiber Laser Metal Marking Workstation Supplier

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE

A27-017 Fiber Laser Metal Marking Tool

Solicitation # FA812527Q0006

Solicitation FA812527Q0006 is a Firm Fixed Price contract issued by the Air Force Sustainment Center's Maintenance Contracting Branch at Tinker AFB, Oklahoma. The Department of Defense is seeking the procurement of two compact, benchtop fiber laser metal marking workstations, such as the Brady Lightwriter or an equivalent. These industrial tools are required to create high-resolution, machine-readable identifiers, including 2D barcodes and permanent text, on various metal tools and tags. Key technical specifications include a 20W variable-pulsed MOPA laser with a 1064nm wavelength, a solid state control system, a pulse range of 1-350ns, and a Class II 635nm laser diode. The equipment must include a two-year warranty, and while a PC is optional, the units must feature available Ethernet ports. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis. Offerors must submit a completed quote sheet and provide comprehensive manufacturer literature, data sheets, or certifications to demonstrate that the equipment meets all salient characteristics. Quotes are due by November 10, 2026, and must be submitted via email to the designated contract specialist and contracting officer. Shipping is designated as FOB Destination to Tinker AFB, and all freight costs must be included in the quoted price. Payment will be processed through the Wide Area Workflow (WAWF) application with default Net 30 terms upon government acceptance of the items.

Machine Tool Manufacturing

POSTED

about 16 hours ago

DEADLINE

A27-022 Videoscope

Solicitation # FA812527Q0004

Solicitation FA812527Q0004 is a Firm Fixed Price contract issued by the Air Force Sustainment Center’s Maintenance Contracting Branch (AFSC/PZIMA) for the procurement of one industrial HD articulating 4mm videoscope. This equipment is used for engine inspections to identify imperfections and foreign object debris, featuring a battery-powered system weighing no more than 20 pounds, a minimum IP54 ingress-protection rating, and joystick-controlled four-way 120-degree articulation at the distal end. The acquisition is a Total Small Business Set-Aside under NAICS code 334519, requiring Trade Agreements Act compliance and delivery to Tinker AFB, Oklahoma, on a FOB Destination basis. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) method, where the government evaluates whether the quoted item meets all material specifications and salient characteristics. Offerors must be registered in the System for Award Management (SAM) and submit their quotes via email to the designated contract specialists by November 4, 2026. Required documentation includes a completed quote sheet and manufacturer literature or data sheets to demonstrate technical compliance. Invoicing must be processed through the Wide Area Workflow (WAWF) application with standard Net 30 payment terms.

Other Measuring and Controlling Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

Wheel Well Stands

Solicitation # FA8125-27-Q-0002

Solicitation FA8125-27-Q-0002 is a firm-fixed-price request for proposal issued by the Department of the Air Force at Tinker Air Force Base, Oklahoma, for the procurement of 25 commercial off-the-shelf towable-dual height 757/767 Wheel Well Stands. This acquisition is conducted under FAR Part 12 for commercial items and is specifically set aside for Women-Owned Small Businesses (WOSB) under NAICS code 332312. The required equipment must be OSHA compliant, feature a Skydrol resistant coating, and be delivered fully assembled with accompanying operation and maintenance manuals. The contract requires delivery to Tinker AFB Building 3001, Door G70, within 20 weeks of the award date. All items must be crated or palletized for forklift handling and must include a Unique Item Identifier (UII) in accordance with MIL-STD-130 and MIL-STD-129 standards. Award will be granted to the vendor offering the lowest total evaluated price, provided the quotation is complete and conforms to all stated terms and conditions. Invoicing and payment will be processed electronically through the Wide Area WorkFlow (WAWF) system.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 11 hours

Advanced Fuel Accessories Test System (AFATS) 02-02 Upgrades

Solicitation # H7TC13

The Air Force is seeking a small business contractor to perform upgrades on the Advanced Fuel Accessories Test System (AFATS) 02-02 Test Stand and its associated calibration cart at Tinker AFB, Oklahoma. The primary objective is to replace obsolete Honeywell doser modules, instruments, sensors, and AC/DC power supplies with commercial off-the-shelf (COTS) equivalents. The upgraded system will be used to test fuel flow proportioners, float valves, refueling receptacles, and transfer pumps. The project includes the delivery of upgraded hardware, comprehensive training on maintenance and calibration, and the provision of all necessary components and parts. This is a firm-fixed-price effort under NAICS 488190, with final acceptance conducted at Tinker AFB following successful functional testing, AFMETCAL certification, and the submission of detailed validation and vibration reports. The contractor is responsible for the packaging and shipping of government furnished property at their own expense and must adhere to strict technical standards, including MIL-STD-461E for EMI controls and NFPA 70 Article 500 for electrical safety in hazardous environments. Key deliverables follow a strict timeline after the date of contract, including a Preliminary Design Review by 60 days, an Intermediate Design Review by 75 days, and a Critical Design Review by 90 days. High security and quality standards are mandated, including NIST SP 800-161 for supply chain risk management, Section 889 NDAA compliance, and a minimum 730-day warranty on all equipment and workmanship. Proposals must demonstrate past performance on similar fuel or hydraulic test stand projects and confirm the availability of a National Instruments Certified LabVIEW Architect and a Mechanical Engineer.

Other Support Activities for Air Transportation

POSTED

DEADLINE

UID Marking and Labeling SpecialistThis subcontract opportunity is for a UID Marking and Labeling Specialist to support prime contractors on Department of the Air Force projects under the Department of Defense. The selected provider will be responsible for the physical marking of equipment using laser etching or data matrix tags to apply Unique Item Identifiers. Additionally, the contractor must handle data registration using specialized software to ensure full compliance with MIL-STD-130 and MIL-STD-129 standards, concluding each task with the delivery of marked equipment and a completed Material Inspection and Receiving Report. The project is designated as a Total Small Business Set Aside under NAICS code 339999. Interested parties must submit their responses by November 4, 2026, at 6:00 PM. The work is associated with agency FA8125 Afsc Pzima and will be performed in the 73145 zip code area.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Seated Electric Towing Tractor SupplierThis small business set-aside subcontract, managed by the Department of Defense for the Department of the Air Force, requires the procurement of one fully operational seated electric towing tractor. The selected supplier is responsible for manufacturing or sourcing the vehicle to meet specific technical criteria outlined in CLIN 0001, with delivery provided FOB Destination. Compliance with MIL-STD-130 and MIL-STD-129 is mandatory for all marking and labeling. Additionally, the contractor must provide Unique Item Identifiers for any units with a cost of 5,000 dollars or more. The opportunity is categorized under NAICS code 333924 and is associated with agency FA8125 Afsc Pzima.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

Industrial HD Articulating Videoscope SupplierThis subcontract opportunity is for the supply of a complete, battery-powered industrial HD articulating videoscope system to support prime contractors on Air Force projects at Tinker AFB. The required system must feature a 4mm probe with four-way, 120-degree joystick articulation and a 3D modeling display. Technical specifications mandate that the equipment weighs less than 20 lbs, maintains an IP54 ingress-protection rating, and is fully TAA compliant. Managed by the Department of Defense under agency FA8125 Afsc Pzima, this procurement is designated as a Total Small Business Set Aside under NAICS code 334519. The solicitation was posted on October 21, 2026, with a response deadline of November 4, 2026. The contract entails the delivery of one complete industrial HD articulating videoscope system to be utilized at the specified performance location.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Electric Tow Tractor

Solicitation # FA812527Q0005

Solicitation FA812527Q0005 is a firm fixed price request for the procurement of one seated, battery-powered electric tow tractor for delivery to Tinker AFB, Oklahoma. This opportunity is specifically set aside for Women-Owned Small Businesses and Economically Disadvantaged Women-Owned Small Businesses under NAICS code 333924. The government will award the contract to the responsible offeror who is technically acceptable and provides the lowest total evaluated price, evaluating the three lowest-priced proposals concurrently. The required vehicle must feature a tricycle wheel configuration, solid pneumatic tires, and a clevis pin style hitch with a quick-release bar. Technical specifications include a tow rating between 12,000 and 16,000 pounds, a minimum top speed of 6 mph, and the ability to maintain at least 3 mph while towing a 6,000 pound load. The tractor must not exceed dimensions of 85 inches long, 40 inches wide, and 55 inches high, and must operate effectively in temperatures from 15 to 100 degrees Fahrenheit. Safety requirements include a foot brake, parking brake, high visibility lighting, an audible backup alarm, and a horn. The unit must be delivered with a battery rated for at least 6 hours of use and be compatible with a 48V charger using an Anderson Connector. Offerors must submit a detailed written statement explaining how they meet all technical criteria, as simple statements of concurrence are not acceptable. The proposal must include completed company information, CAGE code, and wet signatures on Standard Form 1449, along with pricing and delivery timelines. The contractor is responsible for providing Unique Item Identifiers for items costing $5,000 or more and must adhere to MIL-STD-130 and MIL-STD-129 for marking and labeling. Invoicing and payment will be processed electronically via Wide Area WorkFlow.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

DEADLINE

IUID Marking and Registration ServicesThis small business set-aside subcontract, issued by the Department of Defense under agency FA8125 Afsc Pzima, provides IUID marking and registration services for prime contractors supporting Air Force maintenance equipment projects. The scope of work involves generating and applying 2D data matrix symbology in strict accordance with MIL-STD-130 and MIL-STD-129 standards. The contractor is responsible for managing the full data submission process via WAWF, preparing DD Form 1423, and delivering both the physically marked equipment and the final IUID registry reports. This opportunity falls under NAICS code 541690, with a response deadline of October 28, 2026.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

in about 11 hours

Skydrol-Resistant Coating and Anti-Slip ApplicationThis subcontract opportunity, issued by the Department of Defense under the FA8125 Afsc Pzima agency, involves the supply and application of specialized chemical-resistant coatings for Air Force maintenance equipment. The selected contractor will be responsible for surface preparation and the application of Skydrol-resistant industrial coatings and anti-slip stair treads to protect aircraft stands from hydraulic fluid corrosion, ultimately delivering fully coated and finished metal equipment. The project is designated as a Total Small Business Set Aside under NAICS code 325510. Interested parties must submit their responses by October 28, 2026, at 3:00 PM. Performance of the contract is centered in the 73145 zip code area.

Paint and Coating Manufacturing

POSTED

DEADLINE

in about 11 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ductwork Modification and Sheet Metal Fabrication

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Structural Steel Fabrication and Erection

W2SD Endist New England

POSTED

CLOSED

Structural Steel Fabrication and Erection

DLA Troop Support

POSTED

CLOSED

Structural Steel Fabrication and Erection

Phoenix Area Indian Health Svc

POSTED

CLOSED

Structural Steel Fabrication and Erection

260-NETWORK Contract Office 20 (36C260)

POSTED

CLOSED

Access Door Supply for HVAC Systems

Sflc Procurement Branch 3(00040)

POSTED

CLOSED

Structural Steel Fabrication and Erection

DLA Disposition Services - Ebs

POSTED

CLOSED

Supply of 6.5 ft Heavy Steel T-Posts with Clips

Arizona State Office

POSTED

CLOSED

Supply of 6.0 ft Heavy Steel T-Posts with Clips

Arizona State Office

POSTED

CLOSED

Steel Fabrication and Erection

Defense Health Agency

POSTED

CLOSED

Supply of Bushings, Lock Nuts, and Washers

FA5004 354 Cons Pk

POSTED

CLOSED

Supply of Hexagonal Head Screws and Cap Screws

FA5004 354 Cons Pk

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS