This Government Contract opportunity from Department Of Defense was posted on September 12, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WHEELED EXCAVATOR

Awarded

W912PB-17-T-3214Federal

Submission Closed09/12/2017, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924

New

SLED

Two (2) 940 Rough Terrain Forklifts

Solicitation # WMATA-0000010949

The Washington Metropolitan Area Transit Authority is soliciting bids for the procurement of two 940 Rough Terrain Forklifts. This solicitation, identified by number WMATA-0000010949, falls under NAICS code 333924 and is managed through the agency's Virginia operations. The solicitation was posted on October 20, 2026, and requires all responses to be submitted by the deadline of October 30, 2026, at 7:00 PM. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Solicitation # W911S227U0040

Solicitation W911S227U0040 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of one new CAT 255 Skid Steer or an approved equal. This acquisition is designated as a Total Small Business Set-Aside. The required equipment must be brand new, as used or remanufactured products are strictly prohibited. Key technical specifications include a 74 hp diesel engine, a tipping load of 7140lb, a rated operating capacity of 3570lb, and an operating weight of 9578lb. The unit must feature a ventilated and heated high-back air ride seat and include four specific attachments: a 1576 mm front bucket with bolt-on teeth, 1220 mm forks, a CVP110 compactor, and a 100 mm saw. Quotes must be submitted exclusively through the PIEE Solicitation module, and any other submission methods will be rejected as non-responsive. Evaluation is based on Price and Technical factors to determine the most advantageous offer to the Government. For products offered as equal to the CAT 255, offerors must provide the brand name, make, model number, and descriptive literature demonstrating that the item meets all salient physical and functional characteristics. The preferred delivery timeframe is within 30 days on an F.O.B. destination basis. Invoicing and payment will be processed via Wide Area Workflow.

POSTED

DEADLINE

Solicitation # SPE4A7-27-T-1529

Solicitation SPE4A7-27-T-1529 is a fixed-price procurement issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div for the acquisition of four units of Large Track, identified by NSN 1450-00-089-4364. The items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a required delivery date of April 23, 2027. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS). To be eligible for award, offerors must possess an approved US/Canada Joint Certification Program (JCP) certification and DLA controlling authority approval to access export-controlled technical data. The manufacturer's inspection system must comply with ISO 9001:2015 or an equivalent standard, and items produced via additive manufacturing are ineligible for award. Evaluation includes a price preference for certified HUBZone Small Business Concerns. The contract mandates strict adherence to MIL-STD-129 for packaging and RP001 for palletization. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Payment and invoicing must be processed electronically via the Wide Area WorkFlow (WAWF) system. Additionally, the procurement is subject to the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Eight New and Unused Vertical Mast Lifts

Solicitation # 1019320

Saskatchewan Power Corporation is seeking a supplier for eight new and unused vertical mast lifts with an approximate indoor working height of 26 feet. These units will be deployed across multiple locations, including the Chinook and Aspen Power Plants, as well as SaskPower facilities in Regina and Saskatoon. Interested parties can access the solicitation documents and any subsequent amendments or clarifications via MERX. The response deadline for this opportunity is November 5, 2026, and inquiries may be directed to the primary point of contact, Marla Rose.

Saskatchewan Power Corporation

POSTED

DEADLINE

ROLLER UNIT, RAIL TYPE

Solicitation # SPE7L1-27-T-0226

Solicitation SPE7L1-27-T-0226 is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of rail type roller units, specifically Oshkosh Defense LLC part number 3801806 and NSN 3990-01-609-1289. The requirement consists of two line items, each for a quantity of one unit. Delivery is required within five days after order, with an original required delivery date of October 1, 2026. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the 0553 CS BN CO A Composite at Fort Hood, Texas. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements and RP001 packaging requirements taking precedence. Technical requirement RQ011 mandates the removal of government identification from any non-accepted supplies. Administrative compliance includes submitting quotes via the DIBBS system and processing payments through the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including those regarding the Buy American Act, Berry Amendment, and safeguarding covered defense information.

POSTED

DEADLINE

Copy of T8080-260066 Transport Canada Churchill Airport Electric Compact Loader [T8080-260066 Chargeuse compacte électrique de l’aéroport de Churchill de Transports Canada]

Solicitation # Doc5930611138

Transport Canada is seeking the procurement of one electric powered compact loader for the Churchill Airport. The equipment will be used year-round for airside and groundside maintenance, including sanding, seasonal sweeping, and snow removal. The primary objective of this acquisition is to evaluate battery performance, charging compatibility, and overall reliability in cold weather conditions. This solicitation is managed through SAP Ariba, and all technical inquiries and amendments are handled via the Event Messages board. Eligibility is restricted to Canadian suppliers and suppliers from applicable trading partners under the Policy on Reciprocal Procurement. Additionally, the Government of Canada encourages the use of environmentally preferable packaging in alignment with its green procurement strategies.

Government of Canada / Gouvernement du Canada

POSTED

DEADLINE

Regional Recreation Corporation of Wood Buffalo - Request for Proposal - Skid Steer Northside Arena

Solicitation # AB-2026-06863

The Regional Recreation Corporation of Wood Buffalo has issued a Request for Proposal, solicitation number AB-2026-06863, for the procurement of a skid steer for the Northside Arena located in Alberta. This solicitation was posted on October 15, 2026, and requires all responses to be submitted by the deadline of October 23, 2026. Interested parties should direct inquiries to Eric Leatham, the Manager of Ice Facilities, who serves as the primary point of contact for this project. Detailed specifications and requirements for the equipment are contained within the associated RFP documentation available through the Alberta purchasing portal.

Regional Recreation Corporation of Wood Buffalo

POSTED

DEADLINE

Hand Truck Kit Supplier (NSN 3920-01-629-8728)This subcontract opportunity is for the supply of five complete hand truck kits under NSN 3920-01-629-8728 to support prime contractors on Defense Logistics Agency supply contracts. The selected provider must manufacture or source the equipment in strict accordance with the DLA Master List of Technical and Quality Requirements. Delivery is required FOB Origin, with performance taking place in New Cumberland, Pennsylvania. The contract is designated as a Total Small Business Set-Aside under NAICS code 333924. Strict adherence to federal regulations is mandatory, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012. Interested parties must submit their responses by October 26, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-27-T-0081

Solicitation SPE8EF-27-T-0081 is a total small business set-aside issued by the Defense Logistics Agency for the procurement of five kits of hand trucks, identified by NSN 3920-01-629-8728. The contract is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105 and requires quotes to be submitted via the DIBBS portal by October 26, 2026. Delivery is specified as FOB Origin with a timeline of 152 days, and the place of performance is New Cumberland, Pennsylvania. Inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regarding the safeguarding of covered defense information. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors providing alternate parts must submit a complete data package for evaluation, and those using non-domestic materials must provide full disclosure.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Solicitation # SPE8EF-27-Q-0007

Solicitation SPE8EF-27-Q-0007 is a total small business set-aside request for quotation issued by the Department of Defense, specifically DLA Troop Support, Construction and Equipment Manufacturing and Construction. The procurement is for five kits of hand trucks, identified by part number 3920-01-629-8728, with a required delivery date of 90 days after order. Delivery is set as F.O.B. Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while emphasizing that the DLA Master List of Technical and Quality Requirements and RP001 packaging requirements for procurement take precedence. Payment must be processed electronically through the Wide Area WorkFlow system. Evaluation factors include the Buy American and Balance of Payments Program, as well as considerations for used, reconditioned, or remanufactured supplies. Offerors must maintain active SAM registration and comply with various federal certifications, including those regarding covered defense telecommunications and prohibitions on procurements from the Xinjiang Uyghur Autonomous Region and Russian fossil fuel operations.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Next Generation Bomb Hoist

Solicitation # N6833526R1012

Solicitation N6833526R1012 is a request for proposals issued by the NAVAIR Warfare Center Aircraft Division for a fixed-price Indefinite Delivery Indefinite Quantity (IDIQ) contract to manufacture and deliver Next Generation Bomb Hoist (NGBH) support equipment. The scope of work includes the production of four Pilot Production Units and an estimated 940 Full Rate Production Units over a five-year period, alongside associated technical data and reports. The procurement is a total small business set-aside, requiring both the prime contractor and all subcontractors to be small businesses without exception. Award will be based on a best-value trade-off process, prioritizing technical capability and past performance over price. Key technical requirements include compliance with the Technical Data Package, welding certifications, and the ability to manufacture a designated Critical Safety Item cable assembly. Additionally, CMMC Level 2 self-certification is a material condition of award. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by November 2, 2026, organized into separate technical, past performance, and price volumes.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Crane Truck Vehicle SupplyThis subcontract involves the supply and delivery of a complete Crane Truck for prime contractors working on City of Saratoga Springs procurement projects in New York. The scope of work includes the procurement of the chassis and the integration of the crane, with a requirement that the final vehicle is equal or superior to the specified units. To ensure compliance, the provider must supply comprehensive technical literature and deliver one fully operational vehicle equipped with an exterior DOT lighting package. The opportunity was posted on October 15, 2026, with a response deadline of October 27, 2026. Classified under NAICS code 333924, the contract focuses on the specialized delivery of heavy equipment to meet the city's operational standards.

City of Saratoga Springs

POSTED

6 days ago

DEADLINE

in 6 days

AI Contract Overview

This contract, solicitation number W912PB-17-T-3214, was issued by the Department of Defense through the ECC RCO Bavaria for the procurement of one wheeled excavator, specifically a Takeuchi TB 295 W-1 or an equivalent model. The machine must feature a turbocharged 4-cylinder diesel engine with 85.0 kW power and an Interim Tier 4 emission rating. Key technical specifications include a load sensing hydraulic system with multiple programmable auxiliary piping kits, a hydraulic quick coupler with Symlock-System, and a comfort cabin equipped with ROPS, climate control, and a rear-view camera. The excavator is required to have a maximum digging depth of 4115 mm, a dump height of 6480 mm, and a travel speed of 20 kph. The procurement includes a comprehensive set of attachments, including heavy-duty digging buckets of various widths, a hydraulic ditch cleaning bucket, a Lehnhoff hydraulic clamshell bucket, and a drilling and auger drive with multiple drill diameters. The equipment must conform to all EU directives and hold TUV, BG-BAU, STVZO, and CE certifications. The award includes a 12-month manufacturer warranty and requires the delivery of an operator manual, spare parts list, and road licensing certificate. Performance will take place in Ansbach, Germany.

General Info

Agency

Department Of Defense → 0409 Aq Hq Contract

Contract Value

$140,489.43

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

Place of Performance

USAG ANSBACH (DPW) 5843 C HELIOPORT KASERNE BLDG 5805, ANSBACH, AE, 91522, DEU

Set-Aside

NONE

Awardee

ALFRED PILLOKAT AP BAU-UND INDUSTRIEAUSRUESTUNG

Award Issued Date

09/12/2017, 12:00:00 AM UTC

Documents

W912PB-17-T-3214 - Wheeled Excavator

rfp

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedAug 29

Presolicitation

Type ChangedAug 30

Presolicitation → Solicitation

AwardedSep 12

Contract was awarded

Submission Closed

09/12/2017, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → 0409 Aq Hq Contract

Contacts2 people available

OfficeAPO, AE, 09114, USA

Organization / AgencyDepartment Of Defense → 0409 Aq Hq Contract

Office AddressAPO, AE, 09114, USA

Contacts

Ricardo Colon AcevedoContract Specialist

contact@example.gov

Andrea SchottenhammelContracting Officer

contact@example.gov

Full Description

BRAND NAME OR EQUAL ITEM BRAND: Takeuchi MODEL: TB 295 W-1 BASIC DESCRIPTION: ? Engine type: equal or Deutz turbocharged 4-cylinder diesel engine - TCD3.6L4 ? Engine power: 85.0 kW / 115.6 hp ? Emission Rating: Interim Tier 4 ? Bucket System: Hydraulic quick coupler - Type HS08 with Symlock-System and load hook ? 1st Programmable auxiliary Piping Kit long arm, with control circuit (flow liters); with proportional Control + AB ? 2nd Programmable auxiliary Piping Kit long arm, circuit with proportional control ? 3rd Additional auxiliary Piping Kit long arm, for hydraulic quick-coupler ? 4th Programmable additional auxiliary Piping Kit long arm, (pressure and flow of liters) with proportional control (electric power changeover) ? Additional hydraulics installed to the dipper stick with high pressure shut-off valves ? Automatic idle speed reduction system ? Full indicator in the display and on the tank ? Electric refueling pump with automatic shutdown ? Cruise control ? Gas pedal for travel speed ? Adjustment boom ? Hose-burst check valve, to help minimize cylinder drift and maintain load control in the event of a hose failure on the lifting, dipper stick and middle adjusting cylinder. ? Cushioned main boom, arm and swing cylinders. ? The boom and dipper arm have an overload warning device (IAW European standard EN 474-5 load safety device) ? Dipper stick length: 2130 mm ? Swing arm angle (L / R): 70 - / 60 - ? Comfort cabin ROPS, Radio, Climate control ? Working headlights: 6 each ? Rear warning lights red: 2 each ? Back up lights: 2 each ? Separate 24 V socket at the cabin roof ? Air-suspended driver's seat ? One-Key system for all locks ? Pressure relief valve and accumulator for auxiliary hydraulics ? Automated hydraulic tank pressure valve ? Power assist for work and driving hydraulics ? Automatic change-over valve for unpressurized return line for hydraulic breaker operation ? Separate driving hydraulic pump ? Load sensing hydraulic system ? Automatic swing axle lock ? Dual tires, 8 each (8.25 - 20 14 PR) ? Tool box with tools and safety devices ? Battery main switch ? Rear view camera ? Loading and transport tie downs: 4 pcs. ? Dozer blade with parallel guide - Width 2300 mm; Height: ca. 500 mm DIMENSIONS: ? Overall Length on road: 6565 mm ? Transport Height: 3010 mm ? Overall Width: 2,335 mm ? Tail swing Radius: 1,690 mm ? Ground Clearance: 320 mm ? Dozer Blade Width: 2,300 mm ? Digging Depth: 4,115 mm ? Dump Height: 6,480 mm ? Reach at Ground Level: 7,555 mm PERFORMANCE: ? Slew Motor: Constant Vol Piston ? Slew Speed: 10 rpm ? Travel Speed: 20 kph ? Bucket Digging Force: 58.9 KN ? Long Arm Digging Force: 39,7 KN ? Gradeability: 35 % ? Main Pumps: V variable piston x 2, double gear x 1 ? Set Pressure: 275 bar ? Hydraulic flow: 176+156+59.6+43.1+40.3+35.6+15.4 liters ? Total hydraulic flow: 526 liters ? Auxiliary Flow / Hi Flow: ca 70 / ca 120 Liters FLUIDS CAPACITY (ES) ? Fuel Tank: ca 162 liters ? Ad Blue Tank: min. 10 liters ? Hydraulic System: ca 129.2 L DIGGING REQUIREMENTS CAPABILITIES: ? Max. digging depth 4115 mm ? Max. cutting height 8430 mm ? Max. vertical digging depth 3645 mm ? Max. dump height 6480 mm OTHER CHARACTERISTICS: ? min. loading height 2905 mm ? max. reach at ground level 7775 mm ? max. vertical digging radius 4390 mm ? grading blade up position 400 mm ? grading blade low position 150 mm ? lowering depth of support 150 mm ? with upper carriage 2270 mm ? with cabin 1050 mm ? with wheels 525 mm ? swing angle axle 2 x 7,5 degrees ? wheelbase 2200 mm ? length axle lift arm 4555 mm ? distance machine middle to axle 1930 mm ? free height of undercarriage 1140 mm ? trail swing radius 1690 mm ? right swing radius 2190 mm Note: All buckets must be with - Symlock adapters,' meaning all buckets are reversible, and must be complete and ready to use. ? 1 each - Heavy Duty Digging Bucket; width 400mm, rated capacity 130 liters, with knife ? 1 each - Heavy Duty Digging Bucket; width 600mm, rated capacity 216 liters, with 4 teeth's ? 1 each - Heavy Duty Digging Bucket; width 800mm, rated capacity 305 liters, with 5 teeth's ? 1 each - Hydraulic ditch cleaning bucket, with piston-rod protection, swing angle of 2 x 45; width 1500 mm, rated capacity 280 liters ? 1 each - Lehnhoff hydraulic clamshell bucket; endless turn able with HPX drive-system, without Cylinders, Width 800 mm, rated capacity 300 liters, with 6 teeth's; complete with hoses and Hydraulic quick connectors to the excavator hydraulic lines, adapter plate for MS08 Including pendulum brake ? 1 each - Drilling and Auger drive, for up to drill diameter 600 mm; complete with hoses and hydraulic Quick connectors to the excavator hydraulic lines, with adapter plate for MS08, including 1 Each drill diameter 200 mm - length 1240 mm; and 1 each drill diameter 300 mm - length 1240 mm. The wheeled excavator conforms to all EU directives and is T'V, BG-BAU, STVZO and CE-certified WARRANTY: ? Manufacturer's: 12 months REQUIRED DOCUMENTS: ? Operator manual ? Spare Parts list ? Road licensing certificate