Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WICK, EAR

Active
SPE2DS-26-T-275FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The product is a sterile, latex-free, non-lining, and non-adherent ear wick designed specifically for otolaryngology procedures, particularly for the treatment of otitis externa. It features high absorbency, is non-traumatic, virtually lint-free, and compressed for ease of use, ensuring minimal discomfort and optimal performance during surgical or clinical applications. The item is not made with natural rubber latex, meeting strict safety standards for sensitive users. Each unit of issue is a case containing 100 wicks, identified by NSN 6510-01-724-9619, with a single case ordered under purchase request 7017625843. Delivery is required within 20 days of award. This solicitation, identified as SPE2DS-26-T-275F, was posted on July 27, 2026, with responses due by August 3, 2026. The procurement falls under NAICS code 322291 and is managed by the Department of Defense via the Medical Supply Chain MD Surg FSF. Technical and quality requirements are defined by the DLA Master List of Technical and Quality Requirements, with packaging governed by DLA standards and specific protocols for removal of government identification from non-accepted supplies. The point of contact is Kendall Jones, reachable via email and phone, and the place of performance is FPO with ZIP 96694. The solicitation is open to federal contractors under no set-aside designation.

General Info

Sterile, latex-free ear wick, 100 per case, NSN 6510-01-724-9619, delivery in 20 days, DoD procurement.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

322291 - Sanitary Paper Product ManufacturingView NAICS

Place of Performance

PR: 7017625843 PRLI: 0001 CONT’D, FPO, AP, 96694, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-275F.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
Kendall Jones
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WICK,EAR
WICK, EAR
.
DESIGNED TO MEET THE SURGEON'S NEED IN OTOLARYNGOLOGY SURGERY;
NON-LINING/NON-ADHERENT TREAT OTITIS ESTERNAL, STERILE, LATEX-FREE, HIGH
ABSORBENCY, NON-TRAUMTIC, VIRTUALLY LINT FREE, COMPRESSED; NOT MADE WITH
NATURAL RUBBER LATEX
.
UNIT OF ISSUE CASE(CS) OF 100 EACH
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6510-01-724-9619 Quantity: 1 CS Purchase Request: 7017625843QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 322291
New
DIBBS
BANDAGE, ELASTIC
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 322291
New
DIBBS
MIL-STD-2073-1E Packaging and Preservation ServicesThe contract mandates the packaging and preservation of defense items in strict accordance with MIL-STD-2073-1E specifications, requiring the use of fiberboard boxes and corrugated cartons with a clean and dry preservation method to ensure product integrity during storage and transport. All items must be palletized following DLA RP001 standards to meet logistical and handling requirements for military supply chains. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines, restricting eligibility to small business concerns as defined by the FAR. The NAICS code 322291 identifies the industry classification tied to this procurement, reflecting its alignment with other paper product manufacturing services. Performance is specified to occur at a location in Dulles, Virginia, with a zip code of 20166-7629, and offers must be submitted by the deadline of August 6, 2026, after which evaluations will determine awarded contracts under the Fluid Handling Division of the Department of Defense.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Hazardous Materials Packaging and PreservationThe contract requires the design and supply of specialized packaging systems compliant with MIL-STD-2073-1E and DLA RP001 standards to preserve frozen human serum controls during international transport, ensuring a guaranteed 24-month shelf life under controlled conditions. The packaging must be engineered to maintain cryogenic integrity throughout shipment, withstand extreme environmental stresses, and meet strict hazardous materials handling protocols for global logistics. The solution must integrate robust thermal insulation, impact-resistant materials, and validated cold chain technologies to prevent degradation of the serum controls from production to final use. Performance is centered on the APO 09227-0000 location with delivery expected to support Department of Defense medical supply chains, specifically under the MEDICAL SUPPLY CHAIN MD SURG FSF. The effort falls under NAICS code 322291, indicating classification as other paper product manufacturing, and is structured as a subcontract opportunity with a narrow response window closing on August 3, 2026. All packaging systems must undergo rigorous validation to prove consistent performance across diverse climate zones and extended transit times, with compliance documentation and testing reports required to demonstrate adherence to military and logistics preservation standards without exception.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 322291
New
DIBBS
Packaging and Labeling ServicesThe contract requires the provision of military-specification packaging for O-rings using UV-resistant, waterproof, greaseproof, and opaque bags that meet MIL-DTL-117 standards, with mandatory hazardous material labeling included. All packaging must adhere strictly to the military’s technical requirements to ensure protection during transportation and storage under harsh environmental conditions, and labeling must comply with regulations for hazardous materials as defined by applicable military and federal guidelines. The work is to be performed at Tracy, California, with the zip code 95304-5000 designated as the official place of performance. This is a subcontract opportunity under NAICS code 322291, posted by the Department of Defense through the LAND SUPPLY CHAIN office, and responses must be submitted by August 6, 2026, at 5:00 PM. While the solicitation number and point of contact are not provided, the procurement portal for further details is accessible via the given DIBBS link. The contract does not specify any set-aside type, indicating it is open to all eligible subcontractors without geographic or socioeconomic restrictions beyond standard government contracting criteria.
LAND SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Packaging & Marking Compliance (MIL-STD-2073-1E)All items must be packaged and marked in strict compliance with MIL-STD-2073-1E, ensuring protective handling and standardized identification throughout the supply chain. This includes the use of UV-protective bagging conforming to MIL-DTL-117, Type II, Class C, Style 1, to shield contents from environmental degradation, and palletization following the requirements of DLA RP001 to guarantee stability and handling efficiency during transport. Each package must be clearly labeled with MIL-STD-129 marking, providing accurate and legible data for tracking, inventory control, and delivery verification. The work is scoped under a subcontract for the Department of Defense through LAND SUPPLIER OPNS VEHICLE SPT, with performance required at Corpus Christi, Texas, 78419-5255. Bidders must submit responses by August 6, 2026, following the procurement timeline established for this solicitation, which falls under NAICS code 322291 for other paper product manufacturing.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Sustainable & Environmentally Compliant Packaging SupplyThe contract entails the supply of sustainable, non-hazardous packaging materials to meet federal procurement standards under FAR 52.223-23 and ASTM D3951, ensuring environmental compliance and safety for Department of Defense logistics operations. All materials must be eco-friendly, free from regulated hazardous substances, and engineered to meet rigorous U.S. government performance and durability specifications. The work is scoped under NAICS code 322291, which pertains to other paper product manufacturing, and is delivered as a subcontract to support the Land Supplier Operations Vehicle Support division. The solicitation was posted on July 26, 2026, with a firm response deadline of August 6, 2026, and requires proposals to demonstrate full alignment with federal sustainability mandates. Performance is designated for Everett, Washington, with a zip code of 98207-5001, indicating the delivery location for the packaged materials. While no specific set-aside status or point of contact is provided, interested parties must submit responses via the official DIBBS portal using the reference number SPE7L326T133Y, ensuring all technical, environmental, and compliance requirements are clearly documented and verified.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Specialized Packaging and Containment ServicesThe contract requires the design and application of specialized packaging solutions for sensitive electronic assemblies, utilizing weather-resistant fiberboard containers and wooden overpacking to meet rigorous military specifications. The packaging must ensure protection against environmental exposure and physical damage during transportation and storage, maintaining the integrity of critical electronic components throughout the supply chain. This effort is focused on compliance with established defense standards to guarantee reliability in demanding operational conditions. This is a small business set-aside subcontract under the SBA program, open exclusively to qualified small businesses as defined by the SBA’s size standards for NAICS code 322291. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and is managed by the Department of Defense through the Maritime Supply Chain ESOC Buys office. Performance will be conducted at FPO, ZIP 96667, emphasizing logistical support for military operations. All proposals must align with the technical and regulatory requirements outlined in the military standards for packaging sensitive hardware.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Commercial and Export Packaging ServicesThe contract calls for commercial and export-compliant packaging solutions tailored for medical devices, ensuring all units are securely contained in sealed containers and shipped using durable materials that meet international delivery standards. The primary goal is to safeguard the integrity of sensitive medical equipment throughout transit while minimizing freight expenses through optimized packaging designs and logistics planning. All packaging must adhere to regulatory requirements for export and commercial distribution, with attention to environmental resilience, tamper evidence, and compatibility with global shipping protocols. Performance is required at Fort Bliss, Texas, with a response deadline of August 3, 2026, and the solicitation is classified as a subcontract under NAICS code 322291. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, indicating the end-use is within military or federal healthcare supply chains. Bidders must demonstrate the ability to deliver compliant, cost-efficient packaging systems that align with defense logistics standards for international and domestic distribution, ensuring that medical devices arrive ready for immediate use without compromise to safety or functionality.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 322291
New
DIBBS
Defense Telecommunications Equipment Packaging and PreservationThe contract requires the provision of preformed packing materials and preservation services specifically for defense telecommunications equipment, strictly adhering to the MIL-DTL-117 standard. All packaging must be mercury-safe and include UV-protective properties to ensure the integrity of sensitive equipment during storage and transport. The work is classified as a subcontract and is tied to a specific place of performance in New Cumberland with a ZIP code of 17070-5002. The North American Industry Classification System code 322291 indicates the scope involves other paper product manufacturing, aligning with the custom packaging requirements. The solicitation was posted on July 26, 2026, with a response deadline set for August 6, 2026, and is managed under the Department of Defense through the Land Supplier Operations Vehicle Support organization.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Military-Compliant Packaging and PreservationThe contract mandates the packaging and preservation of setscrews in full compliance with military standards, specifically adhering to DLA RP001 and MIL-STD-129 requirements. This includes the use of desiccants and vapor corrosion inhibitors to protect components from moisture and corrosion, along with approved sealing techniques to ensure long-term integrity during storage and transit. The work must be executed under stringent defense logistics protocols, ensuring that all packages are labeled, marked, and documented in accordance with federal military specifications for readiness and traceability. The contract is classified as a subcontract under NAICS code 322291, issued by the ASC COMMODITIES DIVISION of the Department of Defense, with performance required at Hill Air Force Base, Utah, zip code 84056-5734. Bidders must submit proposals by August 3, 2026, following the solicitation posted on July 26, 2026. The focus is on maintaining the operational readiness of military hardware through precise, standardized packaging procedures that meet the rigorous demands of defense supply chains.
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 322291
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThe contract requires the provision of packaging, preservation, and sealing services for defense hardware in strict accordance with MIL-STD-2073-1E and MIL-DTL-117 standards, ensuring compliance with military-grade requirements for long-term storage and transportation. Services must include oxygen-clean processing, UV-resistant material application, and moisture barrier sealing to protect sensitive equipment from environmental degradation under extreme conditions. All work must be performed to ensure the integrity, functionality, and readiness of defense hardware throughout its service life. The procurement is classified as a subcontract under NAICS code 322291, with a response deadline of August 6, 2026, and a posted date of July 26, 2026. The place of performance is designated as Tracy, California, with a ZIP code of 95304-5000. The contracting activity falls under the Department of Defense, specifically the LAND SUPPLIER OPNS VEHICLE SPT organization, though no specific point of contact or set-aside classification is provided. Participation requires full adherence to military packaging specifications and the ability to deliver compliant solutions on schedule to support defense logistics and readiness initiatives.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
ADHESIVE TAPE, SURGICALAdhesive tape, surgical, is prescribed as a latex-free athletic trainer’s tape in white, designed for sports medicine applications with easy tearing and unwinding to the core for rapid application. It features a hospital-grade 100 percent cotton backing with a zinc oxide-based adhesive offering high tensile strength, excellent tackiness, and conformability, while colorfast dyes ensure no bleeding. Each unit is packaged as a set of six, with the unit of issue specified as a package containing six individual tapes. All packaging must comply with commercial standards as outlined in the procurement document, ensuring sealed unit containers protect against damage and breakage, and exterior shipping containers are suitable for safe delivery via common carriers at the lowest cost to the designated point of delivery. Marking must adhere strictly to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The product is governed by specific technical and quality requirements listed in the DLA Master List, with applicable revisions controlled by the solicitation or award date. Government identification must be removed from non-accepted supplies. The NSN is 6510-01-699-4351, with a quantity of two packages required, delivered within 20 days against Purchase Request 7017609530. The solicitation number is SPE2DS-26-T-270B, issued by the Department of Defense’s Medical Supply Chain, with performance to occur at Fort Bragg, North Carolina, and bids must include the source and part number being offered.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

2 days ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
CASE, AED, SEMI RIGIDThe contract specifies the procurement of two semi-rigid carry cases designed exclusively for the PowerHeart G5 AED, featuring an adjustable shoulder strap, a side D-ring for attaching the PowerHeart Ready Kit, and a back pocket for storing extra pads and emergency supplies. The case is engineered to maintain clear visibility of the AED’s status indicator and pad expiration date at all times. Each unit must be packaged in a sealed commercial container that protects against damage and complies with the Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging and shipping must ensure safe delivery by the lowest-cost carrier to the specified destination in Norfolk, Virginia, using traceable freight methods only—parcel post is prohibited. The item is not regulated by the FDA and must be marked per the latest MMS No. 1 guidelines, with sourcing and part number XCAAED004A from ZOLL Medical Corporation identified by the bidder. Delivery is required within 20 days of contract award, with no variance in quantity allowed, and inspection and acceptance occur at the delivery point.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, NITRILEThe contract is for the procurement of 12 boxes of nitrile patient examination gloves, each box containing 90 gloves, with specifications requiring the gloves to be textured for enhanced wet and dry gripping, longer and thicker than standard exam gloves, form-fitting with an extended beaded cuff, ambidextrous, non-sterile, disposable, latex-free, powder-free, and sand-colored in size X-large. The item is identified by NSN 8415-01-600-6052 and delivered FOB destination to a specified address in Boise, Idaho, with a strict delivery requirement of 20 days after award. Packaging must comply with DLA Packaging Requirements for Procurement (RP001), ASTM D3951 for non-hazardous materials, and MIL-STD-129 or Medical Marking Standard No. 1 for medical items, including mandatory barcoding and labeling per government standards. The gloves are non-hazardous and do not require hazardous material packaging controls under FED-STD-313 or TQ IP025. Invoicing and payment processing are exclusively through Wide Area WorkFlow (WAWF), and acceptance of goods occurs at the delivery point by government representatives under FAR 52.246-2. The solicitation, issued by the Department of Defense’s Medical Supply Chain, requires offerors to provide their Unique Entity ID and CAGE code and to certify their small business status and compliance with socioeconomic programs. All contractors must adhere to stringent cybersecurity requirements under DFARS 252.204-7012, including safeguarding covered defense information and reporting cyber incidents, as well as prohibitions on using equipment or services from designated foreign telecommunications vendors. Compliance with whistleblower protections, restrictions on compensation of former DoD officials, and requirements for hazard communication labeling are mandatory. The contract incorporates numerous FAR and DFARS clauses including those related to trafficking in persons, employment eligibility, sustainable products, hazardous material identification, and subcontracts for commercial services. No unit prices or contract value are provided in the solicitation, and award will be based on the lowest price technically acceptable response. All submissions must be made electronically via the DIBBS portal by the closing date of July 30, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339112
New
DIBBS
CATHETER, INTRAVENOUSThe contract is for the procurement of 3 packages of intravenous safety catheters, each package containing 200 units, with a total quantity of 600 catheters. Each catheter is a 16-gauge, 1.25-inch straight needle with a passive safety design featuring a push-off plate on the hub that automatically engages the safety clip when the bevel exits the catheter hub; the bevel orientation is visibly indicated on the push-off plate. The catheter is constructed from fluorinated ethylene propylene (FEP) polytetrafluoroethylene and is available without wings, enclosed in a plastic polyurethane overall. The product is sterile and intended for intravenous injection. The unit of issue is PG/200 each, and delivery is required within 20 days of award. The item is identified by NSN 6515-01-488-4971 under solicitation SPE2DS-26-T-276C, with bids due by August 3, 2026. Technical and quality requirements referenced in the DLA Master List apply, and packaging must comply with DLA standards. Covered defense information may apply, and government identification must be removed from any non-accepted supplies. The procurement is managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, with performance occurring at FPO, ZIP 96694. Bidders must specify the source and part number being supplied.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
WHOLE BLOOD COLLECTThe Whole Blood Collect kit is a compact, vacuum-sealed system designed for field forward missions in remote and austere environments, enabling the safe collection and transfusion of fresh whole blood without reliance on traditional blood bank infrastructure. It meets or exceeds current blood bank standards, military guidelines, and training protocols, ensuring clinical compliance and operational readiness. The kit functions as a standalone skill set module, providing all essential components needed for in-the-field blood donation and transfusion procedures, and is also suitable for training and instructional use. Included are an oral questions form, DD572, Standard Form 518, and a field blood transfusion unit, all integrated into a single, ready-to-deploy package. The contract, solicited under SPE2DS-26-T-275C, is issued by the Department of Defense through the Medical Supply Chain MD Surg FSF, with a place of performance at Camp Pendleton, California. A quantity of 50 units is required, to be delivered within five days of award, under purchase request 7017595160. The National Stock Number for the item is 6515-01-657-4750, classified under NAICS code 339112. The solicitation was posted July 27, 2026, with responses due by August 3, 2026, and the primary point of contact is Michael Small, reachable via email and phone for procurement inquiries.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TUBING, SURGICALSurgical tubing made of plastic with a 3/16 inch inner diameter is being procured under contract SPE2DS-26-T-276L, with the manufacturer part number 0048250 from CONMED Corporation. The item is supplied in 100-foot coils, with a total quantity of 25 coils required, and must comply with all applicable DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951 and MIL-STD-129. Packaging must adhere to the Medical Marking Standard No. 1, with each unit sealed in a protective container and shipped in suitable commercial exterior packaging to ensure safe delivery at the lowest freight cost. The product is regulated by the FDA, requiring a referral to the product specialist in EBS prior to award, including bidder and manufacturer details. Delivery is FOB destination within 20 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination point. All packaging and marking must follow the DLA-defined medical standards, and physical shipment must be sent via traceable freight methods, not parcel post. The delivery address is Scott AFB, Illinois, with a required original delivery date of July 29, 2026, and the contract is managed by the Department of Defense Medical Supply Chain under the NAICS code 339112.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CAP, SYRINGEThis contract specifies the procurement of sterile Luer-lock tip syringe caps in red, manufactured by Baxter Healthcare Corporation with part number H93865001 and NSN 6515-01-252-7552. The item is classified as a Type I CODE S medical device with a fixed 60-month shelf life that cannot be extended, and it is subject to FDA regulation requiring confirmation referral through EBS prior to award. Each procurement unit is defined as a packing group (PG) containing 100 individual caps, with a total quantity of one PG ordered. The item must be packaged in commercial-grade sealed unit containers and shipped in suitable exterior containers to ensure safe delivery at the lowest carrier rate, compliant with Medical Marking Standard No. 1, which supersedes MIL-STD-129. All packaging and marking must adhere to MIL-STD-2073-1E and include no government identification on non-accepted supplies. The contract mandates strict adherence to DLA’s technical and quality requirements as listed in their Master List and requires bidders to clearly identify the source and part number being offered. Delivery is due within 20 days FOB destination, with zero tolerance for variance in quantity and final inspection and acceptance occurring at the delivery point. The procurement is governed by solicitation SPE2DS-26-T-274M, issued by the Department of Defense, Medical Supply Chain, with performance located at Nellis AFB, 89191.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SPONGE, SURGICALThe contract solicitation SPE2DS-26-T-251W is for the procurement of surgical sponges designated as a medical device by the FDA, with each sponge measuring 4 inches by 4 inches and packaged in precut envelopes—25 per box, with 600 boxes total as the unit of issue. The sponges are intended for use around drains, catheters, intravenous infusions, hyperalimentation, and dialysis procedures. Delivery must be completed within five days of order placement under FOB Destination terms, with inspection and acceptance occurring at the point of delivery. The packaging and marking must strictly adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and preservation and packing must comply with MIL-STD-2073-1E. All materials must be marked in accordance with DLA’s MMS No. 1, and commercial packaging standards must be followed without reliance on military specifications except where explicitly required. The contract is a total small business set-aside under NAICS code 339113, with automated award likely based on Lowest Price Technically Acceptable methodology. Pricing is not specified in the document, rendering the total contract value indeterminate. Contractors must be registered in SAM, possess a Unique Entity ID, and comply with cybersecurity requirements under FAR 52.204-21 and 52.240-93 for safeguarding covered defense information. Subcontracting plans are required under FAR 52.244-6, and accelerated payments to small business subcontractors are mandated. Invoicing must be submitted via Wide Area WorkFlow (WAWF), and all shipments must be properly labeled and documented in compliance with federal hazardous materials regulations and DLA logistics directives. The contracting office is located at DLA Troop Support in Philadelphia, PA, with Tiffany Parker listed as the primary point of contact. All responses must be submitted electronically via the DIBBS portal by the solicitation close date, and no physical submissions are permitted.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334511
New
DIBBS
ADAPTER, AIRWAY, CO2The contract is for the procurement of 35 packages of a single-use, disposable CO2 airway adapter suitable for both pediatric and adult use, with each package containing ten units. The item is identified by NSN 6515-01-598-4522 and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. Bidders are required to clearly state the source and part number of the product being offered and adhere to DLA packaging standards. The contract is part of a federal procurement under solicitation SPE2DS-26-T-274V, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 3, 2026, and delivery expected within 84 days after order. The place of performance is listed as APO, 09227-0000, and all supplies must be free of government identification if not accepted. The solicitation is classified under NAICS code 334511 for medical equipment manufacturing.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
MANIFOLD ASSEMBLY, ASPIThe contract pertains to the procurement of two units of the Manifold Assembly, Aspirator, identified by NSN 6515-01-699-5453, for use in medical acquisitions. Each unit must be delivered within 20 days of award and is governed by strict packaging and marking standards, including compliance with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129. Packaging must ensure protection against damage, with each unit sealed in a suitable container and shipped in commercial exterior containers that guarantee safe, low-cost delivery to Scott AFB, Illinois, via common carrier. All supplies must be properly labeled according to MMS No. 1, and copies of this standard are available through DLA Troop Support. The contract incorporates technical and quality requirements from the DLA Master List, and bidders must clearly specify the source and part number being supplied. The procurement is subject to DLA packaging requirements and the potential handling of covered defense information. The solicitation, numbered SPE2DS-26-T-275R, was issued on July 27, 2026, with responses due by August 3, 2026, and is managed by the Department of Defense’s Medical Supply Chain under the NAICS code 339112, with Vernon Stevenson as the primary point of contact.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
DRESSING, CHEST SEAL WOThe dressing is a 6-inch by 6-inch individual occlusive chest seal designed for rapid deployment in combat environments to seal life-threatening penetrating chest wounds. It features a super adhesive backing and is constructed from clear, durable material to ensure visibility and reliability under harsh conditions. The product is sealed in an easy-to-open protective package that allows quick access even in low-light or windy settings, ensuring soldiers can apply it effectively under battlefield stress. It does not include a needle and is intended solely as a wound-sealing device. The item has a mandatory 60-month shelf life, with no extension permitted, and no more than nine months may have elapsed from the manufacturer’s production date to the date of delivery to the government. It is identified by NSN 6510-01-532-8019 and is subject to strict defense information controls and packaging requirements. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with compliance based on the revision in effect at the time of solicitation or award. The contract is part of a federal procurement under solicitation SPE2DS-26-T-275J, with a delivery deadline of 10 days after order placement and is managed by the Department of Defense’s Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SHUNT SET, CAROTID ARTEThe contract specifies the procurement of argyle carotid shunt sets, each containing four sterile, disposable polyvinyl tubes measuring six inches in length with respective inner diameters of 8, 10, 12, and 14 French sizes, all featuring a radiopaque line for visual guidance during surgical procedures. These shunts are intended for use in carotid artery plaque removal and are packaged ten sets per case, with the unit of issue being a package of ten. The item is identified by NSN 6515-01-181-0342 and the contract calls for a quantity of two packages, requiring delivery within five days of award. Technical and quality standards referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date. Packaging must conform to DLA requirements under RP001, and covered defense information provisions under RD003 apply. The bidder must clearly identify the source and part number being offered, and the contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance located at Fort Bragg, North Carolina. The solicitation was posted on July 27, 2026, with responses due by August 3, 2026, and point of contact is Marcos Aliaga.
Surgical and Medical Instrument Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
FUNNEL, COMMON, LABORATOThe contract is for the procurement of two plastic laboratory funnels, each 58mm in size, specifically designated for use with Taylor phosphate and nitrate test kits. The item is identified by NSN 6640-00-165-5851 and is to be delivered within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. The solicitation, numbered SPE2DS-26-T-275U, was posted on July 27, 2026, with responses due by August 3, 2026. It falls under NAICS code 339113 and is managed by the Department of Defense's Medical Supply Chain MD Surg FSF office. Delivery is to a military postal address with zip 96662, and primary point of contact is Olusola Emmanuel, reachable via email and phone provided.
Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 6 days
View Details