Wide Angle Thermal Module

March 13, 2024 Q: With regard to the aforementioned RFIs, our technical team would like to perform the NVIPM modeling but are telling me that they need the definition of the V50s, which don't seem to be in the solicitation. Could you please provide that/those? A: LR-TIM: The identification task for these vehicle targets is defined as having a V50 of 13 cycles. WATM: This identification task for these personnel targets is defined as having a V50 of 9 cycles. ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------ The U.S. Army Contracting Command - New Jersey on behalf of the Product Director Crew Served Weapons (PdM CSW), located at Picatinny Arsenal, NJ, is seeking information from organizations that possess a Wide Angle Thermal Module for use with Remote Weapon Systems (RWS). Information is being sought for thermal imaging camera systems with mature technologies that can be readily modified and integrated to meet the following criteria: Previously developed item with minimal changes necessary for compatibility. Level of maturity shall be such that a production representative unit can be available for qualification testing within 12 months (T), 6 months (O). Passive imaging, Cooled or Uncooled, in the mid wave infrared (MWIR) or long wave infrared (LWIR). Able to fit within envelope size under or close to 90mm wide by 210mm deep by 90mm tall.. Power per MIL-STD-1275 Environmentally ruggedized Operational at temperatures of +140 degrees Fahrenheit to -50 degrees Fahrenheit. The WATM minimum focal-plane array (FPA) resolution in each dimension shall be 640 pixels horizontally and 480 pixels vertically (T), high-definition resolution (O). Shall be capable of supporting or being easily modified to allow for digital video over compressed Gigabit Ethernet (T), Fast Ethernet (O), for high definition (HD) and/or RS170 for standard definition (SD). The WATM shall be capable of identifying personnel targets (0.5 by 1.6 meters) at 100 meters (T). Range performance shall be expressed in terms of 70 percent identification ranges as computed by Night Vision Integrated Performance Model (NV-IPM) using the parameters specified in Range Performance Conditions and Definitions below. The horizontal wide field of view (WFOV) shall be at least 45 degrees (T), 90 degrees (O) in the horizontal direction. 15-year procurable life Mean Time Between Failures (MTBF) of 15,000 hours Internal auto focus capability or fixed focus Spurious images and noise patterns shall not be discernible over the entire field of view (O). Range Performance Conditions and Definitions: Range performance measurements/modelling/analysis/predictions shall be those computed using the Night Vision Integrated Performance Model (NV-IPM) version 1.6 or later. Range performance calculations shall assume a 10" to 17" (diagonal) display with a resolution equal to or greater than the native resolution of the camera(s). The display luminance used for calculating range performance shall not exceed 20 foot-Lamberts. For calculating range performance the distance from the display to the observer's eyes shall be greater than 15 cm and less than 45 cm. The basic atmosphere shall be the 1976 US Standard resident in NV-IPM, with the ambient temperature equal to 300 K and the "Sky-to-Ground Ratio" set to 1.0, and the turbulence defined by a Cn2 of 1.0 EXP-15. The camera gain, effected by the NV-IPM component "RSS Contrast Level" shall not exceed 0.3 (30%). All range performance requirements shall be met without the aid of frame integration and/or averaging. NV-IPM range shall be executed in the default mode where the target angle presented to the eye (alpha) is varying with range. Potential sources are requested to submit, at a minimum, the following information. Responses should be limited to no more than 20 pages, with the only exceptions stated below. Information papers can be submitted in a white paper format. Thermal Imaging System Description: Provide the description of the thermal imaging system, including system growth potential. Characteristics: Focal Plane Array technology (Cooled or Uncooled, MWIR or LWIR), size, pixel count, and architecture Optical telescope description Dimensions or 3D step model (preferred) of camera envelope (model file is outside of 20 page limit) Weight of system Power characteristics (voltage level, steady state power draw, transient power draw, etc.) Power-up time for entire temperature range (+140 degrees Fahrenheit to -50 degrees Fahrenheit) Input files for NV-IPM to support range performance (input file is outside of 20 page limit) Identification Ranges at FOV(s) Characterize and/or describe performance degradation in poor weather and/or obscurant penetration Fields of view size(s) (horizontal and vertical) in degrees, and description of magnification steps/levels, discrete vs. continuous zoom, optical vs. electronic, single vs. multiple cameras Video output details including format, resolution(s), and frame rate System Latency from glass to camera output at the external connector Auto focus time for accurate and repeatable focus Mean Time Between Failures (MTBF) Description of any spurious images and noise patterns, if present Communications protocol Discussion of any special features or modes available, if applicable (ex. image enhancement, stabilization, synchronization, shutter type, etc.) Environmental details Engineering and Qualification test results, if available (outside of 20 page limit) Summary on status of product and maturity level Delivery Schedule: Earliest Availability of Production Representative WATM Monthly production capacity Delivery lead time Prior Military Sales for stated product, if applicable: Program name(s) US military or foreign military (specify country or countries) US Government Contract number(s) US Government Point of Contact (Name, Email, Phone, Organization) Quantities sold to the Military Description: Standalone or as part of larger system Cost: WATM Non-Recurring Cost for minimal compatibility changes WATM Unit Production Cost based on quantity of systems: 1-4 5-49 50-199 200- above Risks: WATM Risk Integration Risk Other: Export Restrictions, if applicable Vendor Questionnaire: The purpose of this questionnaire is to obtain information from industry to assist in the market research. Firms/companies are invited to indicate their interest and capability to satisfy the above requirements by identifying the following items: 1. Company Name 2. Company Address / Country Represented / Website 3. Company point of contact and phone number 4. Business Size (Small/Large & Number of Employees) CAGE Code / DUNS Number. 5. The North American Industry Classification System (NAICS) codes for this effort are 333314. 6. Commerciality: a. ( ) Our product as described above, has been sold, leased or licensed to the general public b. ( ) Our product as described above, has been sold in substantial quantities, on a competitive basis, to multiple state and local governments. The development of the product was done exclusively at private expense c. ( ) None of the above applies. Explain. 7. Location where primary work will be performed (if more than one location, please indicate the percentage for each location). 8. Major partners or suppliers. 9. Identify existing facilities, equipment and workforce (identify what percentage would be supporting this new effort and what additional resources would be required). 10. Provide minimum and maximum monthly production rates of past production of same or similar items. 11. Please provide any additional comments All responsible, interested offerors are encouraged to submit their capabilities/qualification data and any pertinent information in hard copy or via email, within 30 calendar days to: US Army Contracting Command - New Jersey ATTN: Angelica Merino- ACC-NJ-SL Building 9, Phipps Road Picatinny Arsenal, NJ 07806-5000 Email: angelica.m.merino.civ@army.mil The point of contact is Angelica Merino at angelica.m.merino.civ@army.mil or Stacey Conner at stacey.r.conner.civ@army.mil. TELEPHONE RESPONSES AND INQUIRIES WILL NOT BE ACCEPTED. The Government will accept written questions by email to the above. This is a request for information only and should not be construed as a Request for Proposal or a commitment by the U.S. Government. The U.S. Government does not intend to award a contract on the basis of this market survey. All information is to be submitted at no cost or obligation to the Government. If a formal solicitation is generated at a later date, a solicitation notice will be published and more detailed technical requirements will be provided. Respondents will not be notified of the results of this survey or results of information submitted. Any information provided will not be returned. Contracting Office Address: ACC - New Jersey, Center for Contracting and Commerce, Building 9 Phipps RD, Picatinny Arsenal, NJ 07806-5000