This Solicitation opportunity from Department Of Defense was posted on September 16, 2021. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Wilson Main Lock, Upper Gate J-Seal

Closed

W912P521Q0050Federal

Submission Closed09/21/2021, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326299

New

SLED

Waterproofing and Sealant Material SupplyThis subcontract for Waterproofing and Sealant Material Supply involves the provision of specialized membranes and sealants for prime contractors working on facility projects within Collin County, Texas. The scope of work includes the delivery of self-adhering sheet waterproofing, air-moisture barrier materials, and elastomeric joint sealants that comply with ASTM C920 standards. Additionally, the supplier is responsible for providing all necessary technical data sheets, storage requirements, and Safety Data Sheets to ensure proper handling and installation. Managed by the Construction and Projects agency, the contract is categorized under NAICS code 326299. The solicitation was posted on October 20, 2026, with a response deadline set for December 3, 2026. The primary objective is to ensure the timely delivery of high-quality waterproofing materials directly to the designated project sites to support county infrastructure development.

Construction and Projects

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0248

Solicitation SPE8E9-27-T-0248 is a request for quotations from DLA Troop Support, Construction and Equipment MRO SVC I for the procurement of 20 solid rubber sheets under NSN 9320-00-618-2404. The required items are designated as critical application items and must meet specific physical dimensions of 36 inches in width and length with a thickness of 0.062 inches and smooth surfaces on both sides. The rubber sheets must adhere to SAE AMS3202N Revision M and have a non-extendable shelf life of 180 months. Delivery is required at Hill AFB, Utah, with a need ship date of March 1, 2027, and an original required delivery date of June 5, 2027. The contract mandates strict compliance with DLA packaging and marking standards, including RP001, MIL-STD-129R, and MIL-STD-190, with specific requirements for markings every three feet and the prohibition of asbestos. Offerors must provide a Safety Data Sheet prior to award and are prohibited from using additive manufacturing processes. The procurement is fully competitive and includes price evaluation preferences for certified HUBZone small businesses. Administrative requirements include the use of the Wide Area Workflow system for invoicing and adherence to the Buy American Act and Berry Amendment regarding domestic sourcing. Inspection and acceptance will occur at the destination.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8ED-27-T-0051

Solicitation SPE8ED-27-T-0051 is a Request for Quotations issued by DLA Troop Support, Construction and Equipment Containers, for the procurement of six liquid storage tanks, identified by NSN 5430016309622. The requirement is issued under the First Destination Transportation program with delivery terms set as FOB Origin. The original required delivery date is March 12, 2027, with a need ship date of March 28, 2027, and a delivery period of 159 days. Inspection and acceptance will occur at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract incorporates several technical and quality requirements from the DLA Master List, including RA001 for general quality, RP001 for packaging, and RQ011 for the removal of government identification from non-accepted supplies. Packaging must adhere to MIL-STD-129 for marking and labeling, and hazardous materials must be handled according to FED-STD-313 and TQ requirement IP025. Quality assurance follows MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for sample lots under MIL-STD-105/ASQ Z1.4. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The solicitation is subject to various Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses, including the Buy American and Balance of Payments Program, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. Quotes must be submitted via the DIBBS portal, and offerors are encouraged to provide quantity ranges to facilitate requirement adjustments.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

BREATHING APPARATUS, SE

Solicitation # SPE8E6-27-T-0162

Solicitation SPE8E6-27-T-0162 is a total small business set-aside issued by DLA Troop Support Construction and Equipment for the procurement of 550 self-contained breathing apparatus units, identified by NSN 4220-01-675-2761. The requirement specifies a non-extendable shelf life of 180 months, with a mandate that items must have at least 85 percent of their shelf life remaining upon delivery. Delivery is required within 130 days after order, with the destination for inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Because the items may involve hazardous materials, suppliers must submit Safety Data Sheets and labels compliant with 29 CFR 1910.1200 for approval prior to award. Additionally, the procurement is subject to the Buy American Act and the Berry Amendment, requiring disclosure of any non-domestic materials. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information.

POSTED

DEADLINE

Manufacturing of Critical Application O-Rings (NSN 5331-01-470-6850)This subcontract involves the manufacturing of high-precision O-rings for the Department of Defense under the DLA Weapons Support Land Supply Chain. The contractor is responsible for fabricating components to NSN 5331-01-470-6850 dimensions using AMS7276 material, ensuring all finished products meet critical application specifications. Strict material constraints are in place, including a total prohibition of asbestos per FED-STD-313 and the restriction of mercury. Operational compliance is mandatory, requiring adherence to RA001 quality requirements and NIST SP 800-171 cybersecurity standards. The project is categorized under NAICS code 326299, with performance taking place in New Cumberland. Interested parties must respond by October 29, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Lubricated Latex Condoms (NSN 6515-01-363-6545)This subcontract involves the supply of Lifestyles brand lubricated latex rubber condoms for prime contractors supporting Department of Defense Medical Supply Chain projects. The required items must be lubricated with Nonoxynol-9 spermicide, packaged in strips of three, and delivered as one package containing 1,008 units under NSN 6515-01-363-6545. The contractor is responsible for ensuring a non-extendable shelf life of 36 months and strict adherence to ASTM D3951 standards. Additionally, the supplies must comply with the Buy American Act and the Berry Amendment. Performance for this contract is designated for FPO 09591.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DS-27-T-0725

Solicitation SPE2DS-27-T-0725 is a fixed-price contract issued by the DLA Troop Support Medical Supply Chain for the procurement of one package of 1,008 Lifestyles latex rubber condoms, lubricated with Nonoxynol-9 spermacide and sealed in strips of three. The items must be delivered to the USS Hyman G Rickover (SSN 795) within 20 days of the award, with an original required delivery date of October 20, 2026. The product must have a non-extendable shelf life of 36 months, and no more than five months may have elapsed from the date of manufacture to the date of delivery to the government. The contract mandates strict adherence to quality and packaging standards, requiring compliance with ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. All labels must include the manufacturer date, expiration or retest date, and the contract or lot number. Offerors must specify the source and part number being supplied and comply with domestic material restrictions, including the Buy American Act and the Berry Amendment. Invoicing and receiving reports are to be processed electronically through the Wide Area WorkFlow system.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0257

Solicitation SPE8E5-27-T-0257 is a total small business set-aside request for quotations issued by DLA Troop Support Construction and Equipment for the procurement of 417 rubber blocks, NSN 9320015656471. The approved source is 08QN6 RB1000, and the items must conform to TDP Rev A Gen 1. Quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by October 29, 2026. Delivery is required within 149 days after order, with a specified original required delivery date of January 4, 2027, and a need ship date of March 28, 2027, to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to packaging and marking standards, specifically ASTM D3951 for packaging and MIL-STD-129R(3) for labeling, with palletization following RP001. Inspection and acceptance will occur at the destination per FAR 52.246-1. Invoicing and payment must be processed through the Wide Area Workflow (WAWF) system. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential demand volatility.

POSTED

DEADLINE

Rubber Floor Matting - Black

Solicitation # B2728254

The City of Philadelphia Department of Prisons is soliciting quotes for the procurement of five heavy-duty recycled rubber floor matting rolls, each measuring 4 feet by 50 feet. The required material must be new and unused, featuring a textured, slip-resistant surface suitable for wet or dry conditions, and designed for loose-lay installation without permanent adhesive. The matting is intended for commercial use in areas such as gyms, weight rooms, and workshops to protect flooring from noise, vibration, and impact. All products must be delivered FOB Destination Point to the designated Department of Prisons receiving dock in Philadelphia, and vendors are required to provide an anticipated delivery date with their bid. This is a micro-purchase solicitation with a maximum quote threshold of 45,000 dollars, and the contract will be awarded to the lowest responsible and responsive seller. Bids must be submitted electronically via the PHLContracts portal by October 30, 2026. To be considered responsive, sellers must include a manufacturer's specification sheet verifying that the product meets or exceeds all minimum requirements; those proposing equivalent products must provide detailed technical documentation. Mandatory submission requirements include a signed Consent and Authorization Agreement, while the LGBTQ Applicant Opportunity Data Form is optional. The resulting contract will remain in effect for 365 days from the effective date.

POSTED

DEADLINE

Nonmetallic Hose Assembly Fabrication (NSN 4720-01-289-6752)This subcontract involves the fabrication and assembly of 112,000 traceable nonmetallic hose assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The work must be performed in accordance with drawing NR 78286 SS43 Revision 14, as these components are designated as Navy Critical Safety Items. Performance of the contract will take place in San Diego, California. To be eligible, contractors must hold SAE AS9100 certification, CMMC Level 2 compliance, and approval from the US/Canada Joint Certification Program. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 326299. Interested parties must respond by October 22, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision O-Ring Manufacturer (NSN 5331-01-699-1311)This subcontract involves the manufacture and supply of specialized O-rings, specifically NSN 5331-01-699-1311, for prime contractors supporting the DLA Weapons Support Land Supply Chain. All components must strictly conform to Basic and Reference Drawing 53711 8740304, Revision D. To ensure environmental and safety compliance, materials must be asbestos-free and produced without the use of Class I ozone-depleting chemicals. Packaging and labeling must adhere to MIL-STD-2073-1E and MIL-STD-129 standards. Eligible providers must hold JCP Certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 326299 and is managed by the Department of Defense. Interested parties must submit their responses by October 26, 2026, for performance located at FPO 09591.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Raw Material Supply for Sleeve BushingsThis subcontract involves the supply of certified raw metal stock for prime contractors working on DLA Weapons Support ASC projects, specifically for sleeve bushings. The supplier is responsible for sourcing alloy and grade materials that adhere to Hamilton Jet P/N 111014 specifications and must provide all necessary Material Test Reports and Certificates of Conformance upon delivery. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with performance taking place in New Cumberland. Compliance with the Buy American Act and the Balance of Payments Program domestic material restrictions is mandatory. The response deadline for this opportunity is October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

5 days ago

DEADLINE

in 3 days

General Info

Agency

Department Of Defense → W072 Endist Nashville

NAICS

326299 - All Other Rubber Product Manufacturing

Place of Performance

Florence, AL, 35630, USA

Set-Aside

SBA

Documents

Amendment+0001+W912P521Q0050.pdf

Drawings_Solicitation+W912P521Q0050.pdf

Solicitation+W912P521Q0050.pdf

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

2 updates

PhaseClosed

PostedAug 19

Presolicitation

Type ChangedAug 31

Presolicitation → Solicitation

Notice updatedSep 1

Notice details unchanged. Attachments may have changed.

Notice updatedSep 16

Response deadline changed from Sep 16, 2021 to Sep 21, 2021. The notice description changed.

Response DeadlineSep 21

Deadline has passed

Submission Closed

09/21/2021, 03:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W072 Endist Nashville

Contacts2 people available

OfficeNASHVILLE, TN, 37203-1070, USA

Organization / AgencyDepartment Of Defense → W072 Endist Nashville

Office AddressNASHVILLE, TN, 37203-1070, USA

Contacts

Stephanie Richardson

contact@example.gov

Dellaria Martin

contact@example.gov

Full Description

**********AMENDMENT 0001- ********** This solicitation is being amended to answer questions recieved during the question period and extend quotes due date to September 21, 2021; 10:00 am Central Time. ************************************************************************************************************************************* DESCRIPTION/PERFORMANCE WORK STATEMENT: This procurement action is for the delivery and replacement for the molded rubber seals for the Wilson Main Lock Upper Gate need to be replaced. The seals are a standard - J-Seal type used as dams and locks in the US. The contractor will supply and deliver to 6699 Hwy. 321 S. Lenoir City, TN 37772. TYPE OF CONTRACT: The intent of this solicitation is to award one (1) Firm Fixed Price supply contract. Questions regarding the solicitation must be submitted to Stephanie Richardson via email at stephanie.a.richardson@usace.army.mil no later than Thursday, September 9, 2021 at 11:00 a.m. Central Time. Quotes shall be emailed to Stephanie Richardson at stephanie.a.richardson@usace.army.mil by Thursday, September 16, 2021 at 11:00 a.m. Central Time.