This Solicitation opportunity from Pennsylvania was posted on January 16, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Window 1662460 Sliding ASSY B4 Left Hand

Closed

VAR24369863State & Local

Submission Closed01/29/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333998

New

Federal

Pneumatic Drive and Foot Switch Assembly

POSTED

DEADLINE

Robotic Platform Integration and Prototyping

POSTED

DEADLINE

Solicitation # N0010426QYA2L

Solicitation N00104-26-Q-YA2L, issued by the Navsup Weapon Systems Support Mech, seeks the manufacture and delivery of Disk Drive Units (NSN 1HM 7025-01-727-7817). The requirement has been amended to increase the total quantity from 12 to 19 units, split between two line items of 9 and 10 units respectively. The procurement is planned for award in FY27 and requires the units to match the design represented by Cage Code 3GLA3. All freight is established as FOB Origin, with deliveries destined for DLA Distribution centers in Norfolk, Virginia, and San Diego, California. The government will make a single award based on a trade-off between past performance and price, with past performance being the primary and more important factor. Key technical requirements include strict adherence to MIL-STD-130 for physical identification, MIL-STD-2073-1 for packaging, and a total prohibition of metallic mercury in materials. Government Source Inspection is mandatory. Offerors must provide firm unit and total pricing, along with the Procurement Turnaround Time (PTAT) or Repair Turnaround Time (RTAT) as applicable. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and NIST SP 800-171 cybersecurity standards.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

49--TEST SET SUBASSEMBL, IN REPAIR/MODIFICATION OF

Solicitation # N0010425QNE53

This solicitation is for the repair and manufacture of a Test Set Subassembly for the Department of Defense, issued by the Navsup Weapon Systems Support Mech. The contract is a total small business set-aside and is designated as a DO-certified rated order for national defense. It requires the contractor to perform a teardown and evaluation of carcasses within 90 to 120 days to provide a firm-fixed-price quote for the full repair effort. A requested repair turn around time of 16 days is established, and failure to meet this timeline will result in price reductions per unit. The contractor must adhere to strict quality assurance standards, including conducting Quality Conformance Inspections and submitting a production Lot Quality Conformance Test Plan for approval prior to production. All items must be physically identified per MIL-STD-129 and packaged according to MIL-STD 2073. The contract includes a one-year warranty from the date of delivery and requires that any offeror who is not the original equipment manufacturer provide a signed letter of authorization. Final inspection and acceptance are managed through the Wide Area Workflow payment system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

43--PURIFIER,CENTRIFUGA, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RTC34

Solicitation N00104-26-R-TC34, issued by Navsup Weapon Systems Support, is a negotiated procurement for the teardown, evaluation, repair, and modification of five Centrifuga Purifiers (NSN 4330-01-416-9311). The contract is a CIFM fixed-price agreement requiring all work to be performed according to contractor standard practices and original manufacturer specifications, specifically meeting the operational requirements of Cage Code 6K044 and reference number B214AS-300. The government will make a single award based on the most advantageous offer, prioritizing past performance over price, with risk assessments conducted via the Supplier Performance Risk System. The contractor is responsible for all inspection and testing at the point of origin, with records maintained for 365 days post-delivery. Strict adherence to military standards is required, including MIL-STD-130 for physical identification, MIL-STD-2073 for packaging, and MIL-STD-129 for marking. Any design or part substitutions require written approval from the NAVICP-MECH Contracting Officer, except for simple part number changes. Deliverables must be shipped to DLA Distribution Cheatham in Williamsburg, Virginia, and all invoicing must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010425QYJ81

This solicitation is for the procurement of two IDE Drive Assemblies (NSN 1HM 7025 015711831) for the Department of Defense. The contract is a fixed-price agreement with FOB-destination terms and requires a one-year warranty following the delivery date. Awarding will be based on the best value to the Government, evaluating price, delivery lead time, and past performance, with non-price factors weighted equally to price. Key technical requirements include adherence to ISO 9001 quality systems, MIL-STD-129 marking, and strict mercury-free material standards for use on submarines and surface ships. The procurement is managed by the Navsup Weapon Systems Support Mech in Mechanicsburg, Pennsylvania. Multiple amendments have extended the offer due date, with the current solicitation reflecting a response deadline of September 30, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QKE02

This solicitation, issued by DLA Mechanicsburg, seeks the manufacture of cable assemblies, including Cable Assembly AB, Cable TC9007-2, and Cable Test TC62. The procurement is a total small business set-aside and utilizes trade-off criteria for award evaluation, prioritizing price over past performance. The current deadline for quote submissions has been extended to October 13, 2026. Key technical requirements include adherence to ISO 9001 quality standards, MIL-STD-129 marking, and strict mercury-free mandates for use on submarines and surface ships. Contractors must utilize the PIEE-WAWF system for invoicing and receiving reports. All deliverables must meet specific drawing requirements and configuration management standards under MIL-STD-973, with higher-level inspection required for compliance.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # N0038327QMA20

Solicitation N00383-27-Q-MA20 is a fixed-price request for the procurement of 31 units of PIVOT, SUPPORT (part number 1680-LL-B6O-A003) for the Department of Defense, managed by Navsup Weapon Systems Support. The item is designated as flight critical, meaning only Government-approved sources may be solicited. Delivery is required within 90 days on an FOB Destination basis, with inspection and acceptance occurring at the origin. The contractor must adhere to ISO 9001 quality management standards and strict military packaging and marking requirements, including MIL-STD-2073, MIL-STD-129, and MIL-STD-147 for palletization. The Government intends to make a single award based on a best-value determination where past performance is considered more important than price. Past performance will be evaluated using the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The contract incorporates various regulatory requirements, including the Buy American Act, hazardous material identification per FAR 52.223-3, and cybersecurity safeguarding under DFARS 252.204-7012. Offerors must maintain active registration in the System for Award Management (SAM) and provide necessary source approval documentation if not already an approved provider.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # N0010426QFF82

This solicitation is for the manufacture of a Universal Joint designated as Special Emphasis material, meaning it is used in a crucial shipboard system where failure could result in serious injury or loss of the vessel. The item must be produced in accordance with NAVSEA drawing 7384568 and Electric Boat specification 2003, specifically utilizing ASTM B150 UNS C63200 material for the hub and block. The contract is a total small business set-aside and is DO certified for national defense under the Defense Priorities and Allocations System. Key requirements include a one-year warranty, strict adherence to ISO-9001 quality systems, and a prohibition on the use of mercury. The delivery schedule requires the submission of certification data 20 days prior to delivery, with a final material delivery window of 210 days. All certification documentation must be submitted via Wide Area Workflow for review and acceptance by the Portsmouth Naval Shipyard before any material is shipped. The contract emphasizes rigorous traceability, requiring a Certificate of Compliance and objective quality evidence for all components.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # SPRMM126QHB91

This solicitation, issued by DLA Mechanicsburg, seeks the manufacture and supply of data entry keyboards under NSN 7GH 7025-01-518-3899. The required items must conform to the design represented by Cage Code 6Z833, reference number 536-0015. This is a small business-small purchase procurement requiring the contractor to be an authorized distributor of the original equipment manufacturer, with proof of authorization provided on company letterhead. The contract is a fixed-price agreement with inspection and final acceptance occurring at the contractor's or subcontractor's plant, overseen by the Contract Administration Office. Key compliance requirements include physical identification per MIL-STD-130 and shipment marking per MIL-STD-129. Packaging must adhere to MIL-STD-2073-1 for military stock and OCONUS shipments, while CONUS shipments may follow ASTM D3951-18. Item Unique Identification is required per DFARS 252.211-7003. All invoicing and receiving reports must be submitted electronically via Wide Area Workflow. The solicitation also incorporates specific federal regulations, including the Federal Acquisition Supply Chain Security Act and a deviation regarding DEI discrimination. Offerors must submit quotes by November 20, 2026, and provide any necessary hazardous material Safety Data Sheets to NAVSUP WSS prior to award.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

Solicitation # SPRMM127QKA53

Solicitation SPRMM1-27-Q-KA53 is a request for the manufacture and supply of 14 units of a waveguide switch, specifically the design represented by Cage Code 09080 and reference number LM90BPF7X104. The procurement is managed by DLA Mechanicsburg and will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. The contract requires strict adherence to quality and marking standards, including MIL-STD-129 for identification and MIL-STD-2073 for packaging. Inspection and final acceptance of the material will occur at the contractor's or subcontractor's plant. Key administrative requirements include the mandatory use of the Wide Area WorkFlow (WAWF) system for the electronic submission of combo invoice and receiving reports. Offerors who are not the original equipment manufacturer must provide the OEM's CAGE code and part number, and are required to maintain traceability evidence of the item's identity. The solicitation incorporates various federal and defense clauses, including requirements for cybersecurity maturity model certification, transportation of supplies by sea, and the Buy American-Balance of Payments Program. All contractual documents are considered issued when transmitted via mail, facsimile, or electronic commerce methods.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

SWE Mechanical Layout & Conveyor SystemsThe SWE Mechanical Layout and Conveyor Systems subcontract involves the fabrication and installation of mechanical frameworks and conveyor systems for prime contractors working on Technical College System of Georgia facility projects. The scope of work requires the construction of mechanical layouts based on specific Shop Drawing Packets, which includes the assembly of rollers, conveyor belts, and mechanical flow components designed to match the existing Cartersville system. This project is categorized under NAICS code 333999 and mandates strict compliance with O.C.G.A. section 13-10-91. The final deliverable is the completed physical mechanical structure and operational conveyor system. Interested parties should note the response deadline of November 18, 2026.

Technical College System of Georgia

POSTED

about 17 hours ago

DEADLINE

in 21 days

AI Contract Overview

This contract involves the procurement of the Window 1662460 Sliding Assembly B4 Left Hand, designed for the conductor’s side of a vehicle, specifically for the OPP cab. The solicitation was posted on January 16, 2025, with a response deadline of January 29, 2025. The contract is managed by SEPTA, a Pennsylvania-based transportation authority, and falls under the NAICS code 333998, which pertains to miscellaneous miscellaneous manufacturing. The project is categorized as a solicitation with an estimated contract value ranging between $100,000 and $500,000, indicating a significant procurement effort. The primary point of contact for this solicitation is Varghese Abraham, reachable via email at [email hidden]. The contract aims to secure the specified sliding assembly for use on SEPTA’s vehicles, ensuring compatibility with existing systems on the conductor’s side. Interested vendors can find additional details and submit their bids through the provided online link. The contract underscores SEPTA’s ongoing efforts to maintain and upgrade its rolling stock with specialized components, emphasizing the importance of timely responses from qualified suppliers within the specified response window.