Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WIRE, ELECTRICAL

Active
SPE7M2-26-Q-0646Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of electrical wire identified by NSN 6145-01-124-8041, with a quantity of two reels, each containing 250 feet for a total of 500 feet. The wire must comply with technical specifications referenced from SAE AS22759/2A Revision A dated 09/01/2017 and SAE AS22759E Revision E dated 07/01/2024, and it is designated as a critical application item. The product is subject to the Qualified Products List or Qualified Manufacturers List requirements, and full and open competition applies. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-12000 for preservation, with marking conforming to MIL-STD-129 and palletization following DLA packaging standards. The advice code dictates packaging format: if 2N, 28, or 34, the wire must be supplied in a single continuous length with no multiple unit packs; if 2P or 39, multiple unit packs are permitted, and the advice code supersedes any conflicting schedule details. Delivery is required to the DLA Distribution Albany facility in Georgia within 111 days after award, with FOB origin and inspection and acceptance occurring at destination. The unit of issue is reel, and the contract enforces a zero variance tolerance on quantity. Transportation details are governed by DLA procedural notes, and the wire must be shipped to the specified government delivery point with all special marking codes and packaging instructions fully followed.

General Info

Procure 500 feet of SAE AS22759-compliant electrical wire in single reel, FOB origin, deliver to Albany GA within 111 days.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

335929 - Other Communication and Energy Wire ManufacturingView NAICS

Place of Performance

814 RADFORD BLVD BLDG 1221 DOOR 20, ALBANY, GA, 31704-1128, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M2-26-Q-0646 for DLA Land and Maritime Nuclear Reactor Program

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → NUCLEAR REACTOR PROGRAM
View Agency Profile
Office AddressUS
Contacts
Victoria Payne
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 RL = 250 FT
UNIT OF ISSUE REEL, LENGTHS PER SPEC
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
FULL AND OPEN COMPETITION APPLIES.
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. ***********************************************
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS22759/2A (R 2022) REVISION NR A DTD 09/01/2017 PART PIECE NUMBER: M22759/2-03-9
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS22759E REVISION NR E DTD 07/01/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M2-26-Q-0646
SECTION B
SUPPLY/SERVICE: 6145-01-124-8041 CONT'D
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT.
0001 6145-01-124-8041 2.000 RL $ _______________ $ ______________
WIRE,ELECTRICAL
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 111 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION AND PACKAGING SHALL BE IAW THE LATEST REVISION OF MILITARY SPECIFICATION: MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
..
UNIT OF ISSUE REEL, CONTAINS 250 FT.
PARCEL POST ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY
TRANSPORTATION OFFICER
814 RADFORD BLVD BLDG 1221 DOOR 20
ALBANY GA 31704-1128
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND
CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3121
DLA DISTRIBUTION ALBANY DDAG-T
MCLB BLDG 1221 DOOR 20
814 RADFORD BLVD
ALBANY GA 31704-1128
US
GOVT USE
External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016689968 0001 N/A N/A N/A 12/10/2026

SPE7M2-26-Q-0646 NSN/Part Number: 6145-01-124-8041 Quantity: 2 RL Purchase Request: 7016689968QTY: 2 Delivery: 111 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335929
New
DIBBS
High-Reliability Cable Assembly ManufacturingThe contract pertains to the manufacture of a military-specification power cable assembly identified by NSN 6150-01-657-1769, requiring precision wiring, rigorous shielding, and seamless connector integration to meet stringent defense standards. The assembly must demonstrate exceptional environmental durability to withstand extreme conditions inherent in military operations, including exposure to moisture, vibration, temperature fluctuations, and electromagnetic interference. Production must adhere to exacting quality and performance benchmarks to ensure mission-critical reliability under demanding operational scenarios. Issued as a subcontract under the Department of Defense’s Defense Logistics Agency, this effort falls under NAICS code 335929 for other electrical equipment and component manufacturing. Although the solicitation number and specific performance location are not provided, the contract is accessible via a DIBBS portal link, indicating it is part of a broader DoD procurement framework aimed at maintaining supply chain readiness. The posting date of July 20, 2026, suggests this is a forward-looking acquisition, likely designed to support ongoing or anticipated military system deployments requiring upgraded or replacement power cable solutions.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
RF Cable Assembly Manufacturing – NSN 5995-01-468-4693The contract entails the manufacture and delivery of RF cable assemblies designated by NSN 5995-01-468-4693, with an annual production range of 68 to 135 units, totaling up to 405 units over a three-year period. All units must meet the exact same quality, delivery, and compliance standards established under CLIN 0001, ensuring consistency and reliability across the program. The work is being executed as a subcontract under the authority of the Defense Logistics Agency, a division of the Department of Defense, with the North American Industry Classification System code 335929 identifying the industrial category as other electrical equipment and component manufacturing. The contract was posted on July 20, 2026, and is administered through the DIBBS system with the contract identifier SPE4A626D0113. While specific performance locations and contact details are not provided, the requirement implies a national scope with no geographic restrictions indicated for production or delivery.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
RF Cable Assembly Manufacturing – NSN 5995-01-623-8693The contract establishes a subcontract for the manufacture and delivery of RF cable assemblies identified by NSN 5995-01-623-8693, with an annual production rate of 24 to 48 units, totaling up to 144 units over a three-year period. All units must fully comply with applicable military specifications and are subject to government inspection upon arrival at the destination. Delivery is F.O.B. Origin, meaning the contractor assumes responsibility for the product until it is loaded onto the carrier at the point of origin. The work falls under NAICS code 335929, which categorizes it within the electrical equipment and component manufacturing sector. The contract is managed by the Defense Logistics Agency under the Department of Defense, with performance coordinated through a DIBBS procurement portal, though no specific point of contact or place of performance details are provided. The solicitation was posted in July 2026 and is configured as a subcontract without a formal set-aside classification.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Cable Assembly Manufacturing and DeliveryThe contract requires the manufacture, testing, inspection, and delivery of nine military-specification cable assemblies identified by NSN 6150-01-129-7272, with full compliance to performance verification testing, source inspection requirements, and standardized MIL-STD packaging and labeling protocols. The work is being executed under a subcontract issued by the Defense Logistics Agency, a component of the Department of Defense, and falls under NAICS code 335929 for other electrical equipment and component manufacturing. All units must meet stringent defense standards to ensure operational readiness and interoperability in military environments, with no flexibility allowed in testing or documentation procedures. The contract was posted on July 20, 2026, and the place of performance is not specified, though the delivery and compliance obligations are binding regardless of location. The award reference is SPE4A626PX994, and the contracting activity is managed through the DLA’s procurement system.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Supply of Electrical Cable Clamps (NSN 5935015133891, M85049/38S25S)The contract entails the manufacture and delivery of 61 military-grade electrical cable clamps meeting SAE AS85049/38B and AS85049C technical specifications, designed for use in high-reliability environments including defense systems and nuclear reactor installations. The items are identified by NSN 5935015133891 and model designation M85049/38S25S, ensuring compliance with stringent aerospace and defense standards for electromagnetic compatibility, mechanical durability, and environmental resilience. The solicitation falls under NAICS code 335929 for other electrical equipment and component manufacturing and is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense. Although no specific delivery location or point of contact is provided, the performance likely supports critical defense infrastructure requiring certified component sourcing. The contract was posted on July 20, 2026, with procurement managed through the DIBBS platform, indicating formal federal supply chain protocols are in effect.
Defense Logistics Agency

POSTED

about 13 hours ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Electrical Wire Supply – NSN 6145-01-124-8041The contract calls for the supply of two reels totaling 500 feet of specialized electrical wire meeting SAE AS22759/2A Rev A and SAE AS22759E Rev E standards, designated for critical applications requiring QPL or QML certification to ensure reliability and performance under demanding conditions. The wire is identified by NSN 6145-01-124-8041 and is intended for use within the Nuclear Reactor Program under the Department of Defense, indicating high-stakes operational requirements where material integrity is non-negotiable. All delivered material must fully comply with the specified technical revisions and certification levels to meet stringent military-grade specifications. Submissions are due by July 26, 2026, with the solicitation posted on July 20, 2026, offering a six-day window for responses. The contract is structured as a subcontract under NAICS code 335929, which pertains to other electrical equipment and component manufacturing. Performance is required at Albany, Georgia, with a zip code of 31704-1128, and the procurement is managed through the DLA’s DIBBS system via reference number SPE7M226Q0646. While no specific point of contact or set-aside details are provided, the urgency of the timeline and the certification requirements suggest a tightly controlled acquisition process focused on ensuring only qualified suppliers respond with fully compliant materials.
NUCLEAR REACTOR PROGRAM

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 335929
New
DIBBS
Wire Braid Manufacturing and SupplyThe contract covers the manufacture and supply of wire braid identified by NSN 6145145294064 and part number 62530687AA under an IDIQ framework, meaning quantities and delivery schedules will be determined through individual task orders issued over the contract period. All deliveries are FOB origin, with title and risk of loss transferring to the buyer upon shipment from the supplier’s facility. The solicitation is classified as a subcontract and falls under NAICS code 335929, which pertains to other electrical equipment and component manufacturing. The contract is managed by the Department of Defense through the Maritime Supply Chain agency, with a response deadline of August 4, 2026, and the solicitation posted on July 20, 2026. No set-aside preferences are indicated, and the place of performance and point of contact details are unspecified. Interested parties must submit proposals via the provided DIBBS portal link.
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335929
New
DIBBS
BRAID, WIREThe contract pertains to the procurement of wire braid, identified by NSN 6145145294064 and part number 62530687AA, under an indefinite-delivery contract (IDC) with a maximum ceiling value of $350,000 and a guaranteed minimum of four units. The estimated quantity of 33 units is non-binding and subject to delivery order issuance, with no firm obligation for the government to purchase the estimated amount. Delivery is required within 68 days after release of the order, with FOB origin terms meaning title and risk transfer to the government upon shipment from the vendor’s location. Inspection and acceptance occur exclusively at the destination, governed by MIL-STD-1916 or comparable zero-based sampling plans, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major, and acceptance requires zero non-conformances unless otherwise stated. Packaging must adhere to MIL-STD-2073-1E and MIL-DTL-12000 for preservation of wire and cable products, with palletization following DLA’s RP001 requirements. Marking and labeling comply with MIL-STD-129, mandating 2D Data Matrix barcodes on all packaging levels, and special markings are denoted by the placeholder ZZ, indicating contract-specific instructions. Preservation methods include drying (CLNG/DRY:1), with preservation materials and wrapping to be defined per contract. The product is classified as a critical application item, and removal of government identification from non-accepted supplies is required. Mandatory clauses include Equal Opportunity for Workers with Disabilities (Alternate I), Combating Trafficking in Persons, Employment Eligibility Verification, Sustainable Products, Hazardous Material Identification, and requirements relating to compensation of former DoD officials, whistleblower rights, and disclosure of information. Contractors must submit proposals via the DIBBS portal by August 4, 2026, and use WAWF for all invoicing and receiving reports. Offerors must hold a valid UEI and CAGE code, certify size and socioeconomic status, and disclose any use of covered defense telecommunications equipment under DFARS 252.204-7016. Hazardous materials must be labeled per 29 CFR 1910.1200, with alternative labeling requiring prior
MARITIME SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335929
New
Federal
10 AWG THHN WIREThe contract is for 10 AWG THHN wire under solicitation number W911S26U3758, issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. The opportunity is classified as a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to compete, with the NAICS code 335929 indicating it falls under Other Electrical Equipment and Component Manufacturing. The solicitation was posted on July 20, 2026, and responses are due by July 25, 2026, at 3:00 PM Eastern Time. The place of performance is listed with a zip code of 74501, though specific city and state details are not provided. Primary point of contact is Cole Budds, reachable via email at cole.c.budds.civ@army.mil or phone at 918-420-6517. The full solicitation details and submission portal can be accessed through the SAM.gov website link provided.
W6QM Micc-Ft Drum

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335929
New
Federal
12 AWG THHN WIREThe contract is for 12 AWG THHN wire under solicitation number W911S226U3759, issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York. It is a total small business set-aside as defined by FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code is 335929, aligning with other electrical component manufacturing. The solicitation was posted on July 20, 2026, with a firm response deadline of July 25, 2026, at 5:20 p.m. Eastern Time. The place of performance is listed with a postal code of 74501, indicating delivery or service may occur in Oklahoma. Primary point of contact is Cole Budds, reachable via email at cole.c.budds.civ@army.mil or phone at 918-420-6517. The contract type is combined, suggesting it may bundle acquisition methods, and details can be accessed through the SAM.gov portal.
W6QM Micc-Ft Drum

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335929
New
Federal
THHN WIREThe contract solicitation seeks THHN wire under a total small business set-aside, designated for small businesses as defined by the SBA, with the NAICS code 335929. It is issued by the Department of Defense through the W6QM Micc-Ft Drum office, located in Fort Drum, New York, and is open exclusively to small business contractors. The solicitation number is W911S226U3756, posted on July 20, 2026, with a response deadline of July 25, 2026, at 1:00 PM ET. The place of performance is listed with a zip code of 74501, indicating potential delivery or service location in Oklahoma or another region matching that zip, though no specific city or state is provided. Cole Budds serves as the primary point of contact, reachable via email at cole.c.budds.civ@army.mil or by phone at 918-420-6517. Interested parties must submit responses through the SAM.gov portal using the provided UI link before the deadline to be considered.
W6QM Micc-Ft Drum

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335929
New
Federal
16 AWG TFFN WIREThe contract solicitation is for 16 AWG TFFN wire under solicitation number W911S226U3761, issued by the Department of Defense through the Office of W6QM Micc-Ft Drum located in Fort Drum, New York, with a zip code of 13602-5220. The solicitation, posted on July 20, 2026, requires responses no later than July 25, 2026, at 6:00 PM Eastern Time, and is classified as a combined solicitation specifically reserved for small businesses under the SBA’s Total Small Business Set-Aside provision, with NAICS code 335929 indicating wiring device manufacturing. The place of performance is listed with a zip code of 74501, though the exact city and state are unspecified. Primary point of contact for inquiries is Cole Budds, reachable via email at cole.c.budds.civ@army.mil or by phone at 918-420-6517. The solicitation can be accessed and reviewed through the SAM.gov platform using the provided UI link.
W6QM Micc-Ft Drum

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and HandlingThe contract titled Hazardous Materials Compliance and Handling is a subcontract issued by the Department of Defense through its Nuclear Reactor Program, aimed at securing consulting and compliance services related to the proper handling, labeling, and disposal of hazardous materials in alignment with Department of Defense regulations. The solicitation is designated as a Total Small Business Set-Aside under SBA guidelines, ensuring eligibility and preference for small businesses as defined by the Farm Bill and FAR 19.5. The NAICS code 541620 identifies the scope of work within environmental consulting services, requiring specialized expertise in regulatory adherence, safety protocols, and documentation for hazardous waste management. Performance of the contract is specifically required at Tracy, California, with a zip code of 95304-5000, indicating the physical location where these services must be rendered. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, allowing potential offerors a window of eleven days to prepare and submit proposals. The contract opportunity is accessible via the DIBBS platform, and all interested small businesses must ensure full compliance with DoD standards and timely submission to be considered.
Environmental Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Safeguarding ServicesThe contract pertains to the implementation and ongoing maintenance of cybersecurity controls designed to safeguard Covered Defense Information and ensure full compliance with the Cybersecurity Maturity Model Certification Level 2 requirements. The work involves establishing robust security measures aligned with NIST SP 800-171 standards to protect Controlled Unclassified Information, with a focus on continuous monitoring, risk management, and compliance validation. This effort supports the Department of Defense's broader objective of securing sensitive data across its supply chain through standardized cybersecurity practices. The contract is structured as a small business subcontract under a Total Small Business Set-Aside, with the North American Industry Classification System code 541512 indicating it relates to computer systems design services. Performance is required to be conducted at a designated location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses must be submitted by July 31, 2026. The procuring activity is the NUCLEAR REACTOR PROGRAM under the Department of Defense, and all work must comply with federal acquisition regulations governing subcontracting and cybersecurity obligations.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract seeks to procure comprehensive military-compliant packaging, marking, and labeling services for materials managed under the Nuclear Reactor Program within the Department of Defense. All work must adhere to strict military specifications, including proper handling and documentation of hazardous materials as well as compliance with bar-code labeling requirements to ensure traceability and operational readiness. The solicitation is a total small business set-aside under the SBA program, meaning only qualified small businesses are eligible to respond, and the North American Industry Classification System code is 493190, indicating a focus on warehousing and storage services. Performance is required at a designated location in Tracy, California, with a zip code of 95304-5000. The opportunity was posted on July 20, 2026, and responses are due by July 31, 2026, with the procurement structured as a subcontract under the DLA’s DIBBS platform.
Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334310
New
DIBBS
Television Camera Supply and IntegrationThe contract calls for the supply of six military-spec television cameras under a small business set-aside program, reserved exclusively for small businesses as defined by the SBA. The equipment must meet stringent military standards for performance and durability, and all units must comply with specific packaging, labeling, and cybersecurity requirements to ensure operational security and logistics integrity. The work is to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and the North American Industry Classification System code is 334310, indicating manufacturing of audio and video equipment. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, and the contracting entity is the Nuclear Reactor Program under the Department of Defense, operating as a subcontract opportunity through the DLA BSM system.
Audio and Video Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection and Sampling ServicesThe contract calls for independent quality inspection and sampling of manufactured connectors in strict compliance with MIL-STD-1916 or ASQ Z1.4 standards, with an absolute requirement for zero non-conformances on critical attributes. This work is essential to ensure the highest level of product reliability and adherence to military-grade quality benchmarks, where even minor deviations could impact system integrity. The inspection services must be executed with precision, covering all defined critical characteristics and documenting compliance through certified sampling procedures. Performance is required at the specified location in Tracy, California, with a zip code of 95304-5000, and the work falls under NAICS code 541380, indicating it is classified as other scientific and technical consulting services. The contract is issued as a subcontract under the Department of Defense’s Nuclear Reactor Program, underscoring its high-stakes nature and association with critical defense infrastructure. Interested parties must submit responses by July 30, 2026, with the solicitation posted on July 20, 2026, and further details accessible via the provided DIBBS portal link.
Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 339920
New
DIBBS
Specialized Packaging and Preservation ServicesThe contract calls for specialized packaging, preservation, and marking of high-reliability electrical connectors to ensure compliance with military specifications for long-term storage and protection against environmental degradation. The work must meet stringent standards to safeguard the integrity and functionality of these critical components during extended periods of storage, particularly under harsh or fluctuating conditions. All procedures must align with accepted defense protocols to maintain readiness and prevent failure under operational demands. Performance is required at the facility located in Tracy, California, with a zip code of 95304-5000, and the work falls under NAICS code 339920, indicating it involves other miscellaneous manufacturing. The contract is structured as a subcontract, with a response deadline of July 30, 2026, and was posted on July 20, 2026. The ordering agency is the Nuclear Reactor Program under the Department of Defense, emphasizing the mission-critical nature of the components and the need for precision and reliability in all handling and packaging processes.
Sporting and Athletic Goods Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334417
New
DIBBS
High-Reliability Electrical Connector ManufacturingThe contract pertains to the manufacture and delivery of 26 high-reliability electrical plug connectors identified by NSN 5935-01-114-7025 and Part Number MS3406D22-22SX, designed to meet stringent military and aerospace specifications for deployment in mission-critical systems. These connectors are essential components requiring exacting quality controls, durable materials, and rigorous testing to ensure operational integrity under extreme environmental and mechanical conditions. The work is to be performed in Tracy, California, with the delivery deadline aligned to the contract’s response deadline of July 30, 2026, and the solicitation was posted on July 20, 2026, indicating a narrow ten-day window for submission. The contract is classified as a subcontract under NAICS code 334417, which covers the manufacturing of other electrical equipment and components, and it falls under the purview of the Department of Defense’s Nuclear Reactor Program, underscoring the sensitivity and precision required for the end-use application. All units must comply with applicable defense standards and undergo verification to ensure conformity before acceptance.
Electronic Connector Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Export Compliance and Technical Data ManagementThe contract requires strict adherence to ITAR and EAR regulations for the management and control of technical data associated with a military switch, with particular emphasis on restricting access by foreign persons and ensuring all disclosures comply with DFARS 252.225-7048. This includes implementing robust controls to prevent unauthorized international transfers, safeguarding sensitive information, and maintaining documentation that demonstrates compliance throughout the project lifecycle. The subcontractor must establish procedures for identifying, classifying, and handling controlled technical data to align with U.S. export control laws. The work is positioned under NAICS code 541611 and is tied to the Nuclear Reactor Program within the Department of Defense, with performance located in Tracy, California, zip code 95304-5000. The solicitation was posted on July 20, 2026, with responses due by July 26, 2026, indicating a tight turnaround for proposers to demonstrate their export compliance capabilities. Although the contract type is classified as a subcontract, the nature of the technical data involved necessitates comprehensive knowledge of defense export regulations and the ability to operate within highly sensitive security protocols. Failure to meet compliance requirements may result in severe legal and contractual consequences.
Administrative Management and General Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Logistics & TransportationThis contract is for FOB-origin transportation of military switches from supplier locations to DLA Tracy, California, covering both international and domestic logistics. It includes the movement of goods from overseas suppliers through international shipping to a U.S. port, followed by inland freight to the final destination. Suppliers located outside the contiguous United States are explicitly covered, meaning the contract accommodates shipments from Alaska, Hawaii, or other non-contiguous areas with full transportation support. The work falls under NAICS code 484220, classifying it as a specialized freight transportation service, and is managed under the Department of Defense’s Nuclear Reactor Program. The solicitation was posted on July 20, 2026, with responses due by July 26, 2026, and is issued as a subcontract under a larger defense logistics framework. All performance is directed to Tracy, California, with a specified ZIP code of 95304-5000.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334332
New
DIBBS
Military-Grade Switch Supply and PackagingThe contract requires the supply, preservation, packaging, and delivery of a military-grade push switch identified by NSN 5930-01-148-6254, which must fully comply with the technical standards MIL-DTL-28786 for performance, MIL-STD-2073-1E for preservation, and MIL-STD-129 for labeling and traceability. All items must be prepared in accordance with stringent defense logistics protocols to ensure mission readiness and long-term storage integrity. The work is to be performed under a subcontract arrangement, with the place of performance located in Tracy, California, at ZIP code 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 26, 2026, with the NAICS code 334332 indicating classification under Electronic Component Manufacturing. The contracting office falls under the Department of Defense’s Nuclear Reactor Program, signifying the critical nature of the component for defense-related nuclear systems.

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541611
New
DIBBS
Small Business Subcontracting and Compliance SupportThe contract supports small business outreach and ensures compliance with FAR 52.219-8, requiring the contractor to actively engage with small businesses during performance, even though no formal subcontracting plan is mandated. This includes maintaining accurate documentation of all small business engagement efforts, demonstrating good faith attempts to provide subcontracting opportunities, and fulfilling reporting obligations under federal regulations. The scope centers on administrative and procedural support to uphold transparency and accountability in small business participation, aligning with federal goals for broad economic inclusion. The work is tied to the NAICS code 541611, indicating a focus on management consulting services, and is performed at a location in Albany, Georgia, under the Nuclear Reactor Program within the Department of Defense. The solicitation was posted on July 20, 2026, with a response deadline of July 26, 2026, indicating a tight turnaround for submissions. Despite the lack of a set-aside classification or formal subcontracting plan, the contractor must still adhere to standard compliance protocols, making thorough recordkeeping and proactive outreach critical to successful contract execution. The absence of a designated point of contact suggests the need for direct engagement through the provided DIBBS portal for inquiries or clarification.
Administrative Management and General Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance and Inspection ServicesThe contract is for Quality Assurance and Inspection Services to conduct independent inspection and testing of products to ensure full compliance with technical specifications, packaging standards, and labeling requirements as mandated by FAR 52.246-2 and DLA quality protocols. The work is scoped to verify that all deliverables meet the stringent quality benchmarks established by the Department of Defense, with particular attention to adherence to documented technical criteria and regulatory compliance across the supply chain. Inspections will be conducted at the place of performance located in Albany, Georgia, with the NAICS code 541380 indicating the provision of other scientific and technical consulting services. This subcontract opportunity, issued under the Nuclear Reactor Program, requires responsive proposals to be submitted by July 26, 2026, following a posting date of July 20, 2026. The solicitation is open to qualified subcontractors capable of delivering impartial, technical inspection and testing services with proven expertise in defense-related quality assurance systems. All work must align with the Department of Defense’s quality assurance framework and ensure that inspected items are fully traceable, accurately labeled, and properly packaged to prevent damage or nonconformance during transport and storage. Proposals must demonstrate the capacity to execute inspections in accordance with federal regulations and DLA-specific quality standards without reliance on internal or biased verification methods.
Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in 5 days
View Details