Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRE, ELECTRICAL

Active
SPE7M1-26-T-250UFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 2,500 feet of electrical wire identified by NSN 6145-00-231-2185 under solicitation SPE7M1-26-T-250U, with delivery required within 119 days to Robins Air Force Base, Georgia. The wire must comply with SAE AS22759/11A Revision A dated 12/01/2015 and be packaged and preserved in accordance with MIL-DTL-12000 and MIL-STD-2073-1E, with marking conforming to MIL-STD-129. Packaging instructions indicate spool lengths of 500 feet and specify that depending on the advice code—2N, 28, or 34—the material must be supplied as continuous length with no multiple unit packs; if the code is 2P or 39, multiple unit packs are permitted. The requirement is subject to the DLA Master List of Technical and Quality Requirements, and deviations or waivers require formal request. The wire is designated a critical application item and is listed on a qualified products or manufacturers list. The contract authorizes a 5% variance in quantity and stipulates inspection and acceptance occur at destination under FOB origin terms. Preservation, packaging, and shipping details are tightly defined with specific codes for materials and methods. The delivery must be completed by December 15, 2026, with an original required date of September 18, 2026. Transportation and shipping instructions follow DLAD Proc Notes C19 and C20, and the unit of issue is feet as specified under DoD standards. All correspondence and performance must adhere to federal procurement protocols, with point of contact Alisha Blanton at DLA Maritime Supply Chain.

General Info

Procure 2,500 feet of SAE AS22759/11A wire to Robins AFB by Dec 15, 2026, per MIL standards, 5% variance allowed.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335929 - Other Communication and Energy Wire ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M1-26-T-250U Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Alisha Blanton
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE,ELECTRICAL
WIRE,ELECTRICAL
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
500 FT/SPOOL, LENGTHS PER SPEC
THIS NSN IS LISTED AS A PRIMARY QPL OR QML THEREFORE
THE QUALIFIED PRODUCTS LIST OR QUALIFIED MANUFACTURERS
LIST IS APPLICABLE.
If Advice code is 2N, 28, or 34, this requirement is to provide material in continuous length. Multiple unit packs are unacceptable. Only continuous length will meet the requirement. If Advice code is 2P or 39, this requirement is to provide material in continuous length. Multiple unit packs are acceptable. Advice code (ADV) is located after the "For Government Use Only" heading under the Shipping Information. If there are inconsistencies between the schedule and Advice code, the Advice code takes precedence. **************************************************
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD SAE AS22759/11A (R2020) REVISION NR A DTD 12/01/2015 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M1-26-T-250U
SECTION B
PR: 7017233494 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017233494 0001 FT 2,500.000
NSN/MATERIAL:6145002312185
DELIVERY (IN DAYS):0119
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 5% MINUS 5%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:500 PRES MTHD:ZZ CLNG/DRY:1 PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:XXX
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PRESERVATION AND PACKAGING SHALL BE IAW THE
LATEST REVISION OF MILITARY SPECIFICATION:
MIL-DTL-12000, FOR CABLE, CORD AND WIRE.
..
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:12/15/2026 Original Required Delivery Date:09/18/2026
SPE7M1-26-T-250U NSN/Part Number: 6145-00-231-2185 Quantity: 2,500 FT Purchase Request: 7017233494QTY: 2500 Delivery: 119 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335929
New
DIBBS
Cable Assembly Manufacturing and SupplyThe contract entails the manufacture and delivery of 4,000 military-grade cable assemblies designated by NSN 5995-01-698-9948, strictly adhering to MIL-STD-1916 for quality assurance and MIL-STD-129 for marking and labeling requirements. The work is classified as a subcontract under the NAICS code 335929, and it is managed by the Defense Logistics Agency under the Department of Defense, ensuring alignment with federal defense supply chain protocols. The production must meet exacting military specifications to guarantee operational reliability in deployed environments. The contract was posted on August 5, 2026, and the place of performance and physical office details are not specified, indicating flexibility in manufacturing location as long as delivery meets federal requirements. The award tracking is accessible via a DIBBS portal link, and while no set-aside status or point of contact is listed, compliance with all technical, packaging, and documentation standards is mandatory. The subcontractor is expected to fulfill all contractual obligations related to quality control, traceability, and timely delivery to support Defense Logistics Agency supply readiness.
Defense Logistics Agency

POSTED

about 23 hours ago

DEADLINE

N/A
View Details
NAICS: 335929
New
DIBBS
Supply of Power Cable (NSN 6145-01-582-3351)
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
DIBBS
CORD, ELECTRICAL
Solicitation # SPE7M1-26-T-250N
This contract specifies the procurement of electrical cord, 14-7 cable, 21.6 feet in length, with a unit of issue of each and a total quantity of seven units. The item is identified by NSN 6145015305996 and part number 20038286 from Fast Global Solutions Inc, and is classified as a critical application item. Delivery must be made FOB origin with zero variance in quantity and is subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all DLA Master List of Technical and Quality Requirements taking precedence. Continuous length is required if the advice code is 2N, 28, or 34, while multiple unit packs are permitted under advice codes 2P or 39, with the advice code overriding any schedule discrepancies. The delivery deadline is 149 days from the award date, with an original required ship date of January 14, 2027. All packaging and palletization must adhere to RP001 DLA Packaging Requirements, and the consignee is the DLA Distribution facility at New Cumberland, Pennsylvania. The solicitation number is SPE7M1-26-T-250N, issued under a federal procurement program with a NAICS code of 335929, and the point of contact is Alisha Blanton of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRICAL
Solicitation # SPE7M2-26-T-6047
This contract pertains to the procurement of 633 feet of specialized electrical cable, identified by NSN 6145-01-455-1062 and purchase request 7017684339, under solicitation SPE7M2-26-T-6047. The cable must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, and must conform to NEMA WC 27500-2025 Revision D, dated January 1, 2025, with specific packaging and preservation standards outlined in MIL-DTL-12000 and MIL-STD-2073-1E. All supplies must be packaged in 500-foot reels, preserved using dry, non-corrosive methods, and marked per MIL-STD-129 without any special marking codes. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the cable or its components, with exceptions limited to functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemically specified reagents by NAVSEA; portable devices containing mercury must include a secondary containment and be shock-proof in accordance with NAVSEA 5100-003D. Delivery is required FOB origin, with a 161-day delivery schedule and an original required delivery date of March 27, 2027, though the supplier must ship no later than January 26, 2027. The quantity may vary by plus or minus five percent. Inspection and acceptance occur at the destination, and the item must be delivered to DLA Distribution at the New Cumberland facility in Pennsylvania. The unit of issue is feet, with a unit price of $0.00 per foot totaling $633.00, though no pricing detail is listed beyond this base entry. The cable must be shipped in compliance with DLA procedures C19 and C20 for transportation, and all government identification must be removed from non-accepted supplies. This solicitation closed on August 17, 2026, and is issued under the NAICS code 335929 by the Department of Defense’s Nuclear Reactor Program, with David Larsen as the primary point of contact.
NUCLEAR REACTOR PROGRAM

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
DIBBS
CABLE, SPECIAL PURPO
Solicitation # SPE7M1-26-T-251R
The contract pertains to the procurement of 500 feet of special purpose cable identified by NSN 6145-01-460-2903 under solicitation SPE7M1-26-T-251R, with a required delivery deadline of 391 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, and apply based on the solicitation or award date depending on the acquisition size. Any deviations or waivers must be formally requested through a Configuration Change Management Engineering Change Proposal or a Variance Request. The alternate offeror is obligated to submit a complete data package detailing both the approved and alternate parts, as no data is currently available. The contract is issued by the Department of Defense through the Maritime Supply Chain, with performance to occur in New Cumberland, Pennsylvania, and the point of contact is Alisha Blanton at DLA. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 335929 for other electrical equipment and component manufacturing.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M1-26-T-250R
This contract pertains to the procurement of cable, power, and electrical components identified by NSN 6145-01-582-3351 and part number 13-91852 REV 52, with a quantity of eight units to be delivered within ten days of contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation and packaging of cable and wire. Marking must adhere to MIL-STD-129, and palletization must follow DLA packaging requirements. The items are destined for the Royal Jordanian Air Force at Muwaffaq Salti AB in Jordan, with transportation governed by specific DLA procedural notes. The contract prohibits the use of Class I ozone depleting chemicals and requires cybersecurity compliance through CMMC Level 2 self-assessment. All technical and quality specifications referenced by R or I numbers are incorporated via the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. The unit of issue is each, priced at $8.00 per unit, totaling $64.00, and the contract falls under solicitation SPE7M1-26-T-250R with a required delivery date of July 6, 2026. Government use identifiers and distribution codes are included for internal tracking, and the point of contact is Alisha Blanton of the Department of Defense.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-R-XC27
This contract, issued under solicitation number SPE4A6-26-R-XC27 by the DLA Aviation ASC Commodities Division, is an indefinite delivery purchase order for 100 cable assemblies identified by National Stock Number 5995-01-664-4125 at a firm fixed price, with a delivery requirement of 197 days after award. The contract serves as a long-term sourcing vehicle with a five-year base period, during which delivery orders may be placed up to an aggregate ceiling of $350,000, with a guaranteed minimum annual demand of 100 units. All supplies are to be delivered FOB origin to various CONUS stock locations, with inspection and acceptance occurring at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, container types, and palletization standards defined under DLA’s packaging requirements. The product is classified as a critical application item and is subject to stringent quality controls, including sampling per MIL-STD-1916 or ASQ H1331 Table 1, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, and zero non-conformances required unless otherwise specified. The contractor must comply with comprehensive cybersecurity and information security obligations, including achieving and documenting CMMC Level 2 self-assessment, and implementing DFARS clauses covering safeguarding covered defense information, prohibiting acquisition of certain telecommunications equipment, and reporting cyber incidents. Additional regulatory requirements include adherence to Buy American and trade restriction clauses, prohibitions against hexavalent chromium and hazardous materials, and compliance with trafficking in persons provisions. All offers must be submitted electronically via email to the designated buyer, not exceeding 15 MB, and require full completion of SAM representations and certifications, including those related to foreign ownership, defense telecommunications, and state sponsorship of terrorism. Packaging must include hard copies of the contract, material certifications, and manufacturing drawings within each unit, and the contractor must use the WAWF system for all invoicing and receiving documentation. The evaluation for award emphasizes past performance as significantly more important than other non-price factors, with price assessed comparatively alongside historical quality and delivery compliance. Offers that fail to meet any mandatory representation, certification, or documentation requirement will be deemed technically unacceptable.
ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335929
New
DIBBS
CABLE, POWER, ELECTRI
Solicitation # SPE7M1-26-T-251G
This contract specifies the procurement of 500 feet of power cable identified by NSN 6145014257810, conforming to the technical standard NEMA WC 27500-2025 Revision NR dated 01/01/2025 with part number M27500-22JF3C07. The cable must be supplied in continuous length, with the packaging and shipment requirements governed by DLA’s Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging guidelines. The unit of issue is feet, with a quantity variance of plus or minus five percent allowed, and delivery is due in 154 days FOB origin, with inspection and acceptance occurring at the destination. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of January 19, 2027, and an original delivery deadline of April 28, 2027. The item is subject to the Qualified Products List, requires full and open competition, and is classified as a critical application item. Guidance on unit of issue conversion is provided via a DLA-linked Excel file, and any deviations or engineering changes must be formally requested. The contract is issued under solicitation SPE7M1-26-T-251G, with procurement controlled by the Department of Defense’s Maritime Supply Chain, and primary point of contact is Alisha Blanton.
MARITIME SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335929
New
Federal
NOAA: BARON Weather Zero Balance NEXRAD Cables for the National Logistics Support Center (NLSC)
Solicitation # 1305M226Q0202
The National Oceanic and Atmospheric Administration (NOAA) is seeking to award a firm fixed price contract solely to small businesses for the procurement of Baron Weather Zero Balance NEXRAD Cables to support the National Weather Service’s National Logistics Support Center in Grandview, Missouri. This requirement is strictly branded to Baron Weather, Inc., and only authorized resellers of Baron Weather products are eligible to respond, as market research has confirmed no alternative cables can meet the critical technical specifications required for the WSR-88D severe weather radar system. These cables are essential for command, power, control, and data routing functions, and without them, the radar system would become inoperable, severely impacting the NWS’s ability to fulfill its Tri-Agency Agreement and provide necessary spare parts for maintenance and repair. Qualifying an alternative supplier is not feasible due to the extensive testing, labor, and funding required, making Baron Weather cables the only acceptable solution. All prospective contractors must be registered in the System for Award Management (SAM) and possess a valid Unique Entity Identifier (UEI) to be considered for award. The solicitation is a total small business set-aside under FAR 19.5, with responses due by July 30, 2026, and is identified by solicitation number 1305M226Q0202 under NAICS code 335929. Compliance with all items outlined in the Instructions to Offerors is mandatory; failure to address any of the first nine items will result in non-compliance and disqualification. The point of contact for this solicitation is Nikki Smith, and the award will be made to the responsible small business offering the best value, as determined in accordance with FAR 12.203(c)(2).
Department Of Commerce Noaa

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICA
Solicitation # SPE4A6-26-R-XC17
This solicitation seeks a CABLE ASSEMBLY, SPECIAL PURPOSE, ELECTRICAL, identified by NSN 6150-01-525-5743, under a Firm Fixed Price Indefinite Delivery Purchase Order (IDPO) with a guaranteed minimum annual quantity of 15 units and a total contract ceiling of $350,000. The item must be manufactured or assembled by a Qualified Manufacturer or Qualified Products List (QML/QPL) entity as defined by the Performance Review Institute and must strictly comply with Technical Data Package Rev A Gen 1 for Basic Drawing 98748 200123046 and Reference Drawing 98752 200415485. The solicitation is a Total Small Business Set-Aside under NAICS code 335929, requiring offerors to maintain current SAM registrations and complete all applicable certifications including disclosures related to foreign ownership, Buy American and Trade Agreements, and the Secondary Arab Boycott of Israel. The contractor must possess a Cybersecurity Maturity Model Certification (CMMC) Level 2 classification by a Certified Third-Party Assessment Organization and comply with stringent export control regulations under ITAR or EAR, restricted to DLA contractors with JCP certification, completed training, and DLA approval. Technical data is subject to the Defense Federal Acquisition Regulation Supplement (DFARS) 252.225-7048, and all shipments must adhere to MIL-STD-129 for labeling, with additional markings stating “Product Verification Test Samples – Do Not Post to Stock” and contract-specific identifiers. Packaging must conform to DLA Master List requirements, which supersede ASTM D3951, and palletization must follow RP001. Inspection and acceptance occur at origin, with sampling required under MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, assigning verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 to critical, major, and minor attributes. The contractor must maintain an ISO 9001:2015 quality management system and comply with Hazard Communication Standard (29 CFR 1910.1200) labeling for hazardous materials, as well as MIL-STD-129 requirements for radioactive content exceeding
ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 14 days
View Details
NAICS: 335929
New
Federal
CABLE,COAX ARMOR
Solicitation # N0010426QEC25
The contract pertains to the procurement of COAXIAL ARMOR CABLE under solicitation N0010426QEC25, issued by the Naval Supply Systems Command Weapon Systems Support Mechanical Office. Pricing is valid for 60 days after the closing date unless otherwise specified, and all contractual documents are deemed issued upon electronic transmission or mail delivery. The scope mandates strict adherence to the Individual Repair Part Ordering Data (IRPOD) as the primary technical reference, with precedence given to contract amendments, schedule provisions, and terms and conditions in case of conflicts. Contractors must comply with specified revisions of referenced technical documents obtained via the BPMI e-Commerce portal, and may not mix revisions without written approval. All supplies must meet cleanliness control standards as defined in MIL-STD-767, MIL-STD-2041, or other IRPOD-identified requirements, and packaging must conform to MIL-PRF-23199 with specific provisions for heat-sealed envelopes and green poly bags; fire-retardant packaging is expressly prohibited. Mercury and mercury-containing compounds are strictly excluded from any part of the supplied material. Quality assurance obligations are governed by the IRPOD, requiring contractors to maintain an approved inspection system and retain complete inspection records available for government review throughout contract performance and beyond. Technical Data Packages (TDPs) are referenced through DD Form 1423, with specific instructions on data delivery timing, format, approval requirements, and distribution restrictions governed by DoD codes A through F. The cable must be delivered in 500-foot continuous lengths, accompanied by a Certificate of Compliance per DI-MISC-81356 for each unique NSN and item nomenclature combination, submitted at time of delivery. The contract enforces mandatory use of Workflow Pro, compliance with cybersecurity maturity model requirements, and adherence to small business program representations, veteran and disability equal opportunity mandates, and security prohibitions. A total small business set-aside is in effect, with NAICS code 335929 applicable. Delivery must occur at the specified location with inspection and acceptance governed by government representatives, and all waivers or deviations must be submitted in advance with full technical justification and supporting documentation. The contract is governed by FOB destination terms and requires adherence to priority rating for national defense purposes.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in 28 days
View Details
NAICS: 335929
New
Federal
61--CORD,ELECTRICAL
Solicitation # N0038326QFB02
The U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia is proceeding with a sole-source procurement for 18 electrical cords, part number 06600-00839-110 and NSN 1R-6145-016986237-H5, under authority of 10 U.S.C. 3204(a)(1) and FAR 6.302, due to the exclusive nature of the item and the government’s lack of ownership or rights to the data required to source it elsewhere. The delivery term is FOB origin, and the acquisition will be conducted through the existing Basic Ordering Agreement N00383-26-G-P401 with Sikorsky, as no alternative suppliers can meet the requirement. All responsible entities may submit capability statements, but only Sikorsky is anticipated to provide an acceptable offer, and no competition will be pursued unless compelling contrary evidence arises. Any firm not already approved to manufacture the item must submit a Source Approval Request, though the procurement will not be delayed for such approvals. The acquisition will follow FAR Part 15 procedures, excluding commercial item policies under FAR Part 12 due to the custom, non-commercial nature of the item. The solicitation is not a small business set-aside and will be managed electronically through NECO, with no hard copies or phone requests accepted. Submissions of qualifications must be sent via email to the designated point of contact by the September 18, 2026 deadline, and responses received within 45 days of the synopsis posting may be considered for future competitive intent assessments.
Navsup Weapon Systems Support

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 488999
New
DIBBS
Government-Arranged Transportation (First Destination Transportation - FDT)The contractor is tasked with preparing and packaging an impeller for government-arranged sea transport under the Department of Defense’s First Destination Transportation program, ensuring full compliance with military logistics standards. This work requires precise handling and packaging procedures tailored to secure military transport requirements, with the impeller destined for delivery via sea under the supervision of the Maritime Supply Chain branch. The contract is structured as a subcontract under the NAICS code 488999, indicating it pertains to other support activities for transportation, and all activities must align with the stringent protocols enforced by the Department of Defense for defense-related cargo. The solicitation was posted on August 5, 2026, and responses are due by August 12, 2026, with no specific set-aside classification indicated. Although no organizational address or point of contact details are provided, the work must be performed in accordance with the specifications outlined by the DLA’s FDT program, and the contract is accessible via the DIBBS platform. The contractor must ensure all packaging, labeling, documentation, and readiness for sea transport meet the operational and security demands of military logistics, with no flexibility in adherence to established standards.
All Other Support Activities for Transportation

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423840
New
DIBBS
Domestic Supply Chain Compliance and ReportingAll materials used in production must be sourced exclusively from U.S. or designated foreign countries to ensure compliance with FAR and DFARS regulations, with full documentation maintained to verify origin and traceability throughout the supply chain. The subcontract requires strict adherence to domestic sourcing requirements and demands rigorous recordkeeping to demonstrate adherence to federal procurement standards. This contract is issued by the Department of Defense through the Maritime Supply Chain office and is open for response until August 12, 2026, with materials classified under NAICS code 423840 related to wholesale trade of miscellaneous durable goods. Failure to provide accurate documentation or source non-compliant materials will result in nonconformance and potential contract termination.
Industrial Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332112
New
DIBBS
Precision Machining of Centrifugal Pump ImpellerThe contract calls for the manufacture of two precision centrifugal pump impellers designed for critical applications requiring strict compliance with military or industrial specifications. This subcontract is part of the Department of Defense’s Maritime Supply Chain initiative and is classified under NAICS code 332112, indicating it falls within the precision machining and manufacturing sector for pumps and pumping equipment. The impellers must meet exacting quality and performance standards to ensure reliable operation in demanding environments, where failure is not an option. All work must be completed to stringent technical requirements without deviation, emphasizing dimensional accuracy, material integrity, and surface finish. The solicitation was posted on August 5, 2026, with a firm deadline for responses on August 12, 2026, leaving a limited window for qualified subcontractors to submit proposals. The place of performance and point of contact details are not specified, suggesting the contractor may have flexibility in location but must still meet all delivery and certification benchmarks. The contract is accessible through the DIBBS platform, and interested parties must ensure full alignment with the technical and compliance demands outlined in the full RFQ to be considered for award. There is no set-aside designation, meaning any eligible supplier may bid regardless of business size or ownership characteristics.
Nonferrous Forging

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
New
DIBBS
Data retrieval failure — no sub-opportunities identifiableData retrieval for the prime contract has failed, preventing identification of any subcontract opportunities linked to this solicitation. The posting date is August 5, 2026, with a response deadline of August 17, 2026, and the opportunity is categorized as a subcontract under the Maritime Supply Chain agency within the Department of Defense. The place of performance is listed as Robins AFB with a zip code of 31098-1887, though no city, state, or country details are provided for the office address or point of contact. No solicitation number, NAICS code, set-aside type, or organization type is available, and the official link to the solicitation is accessible via the DIBBS platform.

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Compliance & LabelingThis contract requires strict adherence to mercury-free production standards and the proper application of OSHA-compliant hazard labels and safety data sheets for all hazardous material packaging. The work must be performed in compliance with federal safety regulations to ensure the safe handling, storage, and transport of dangerous goods. The solicitation is issued as a subcontract under NAICS code 541690, with a deadline for responses on August 17, 2026, and the performance location is designated as San Diego, California, with a specific ZIP code of 92136-3581. The contracting entity is the Department of Defense through its Maritime Supply Chain organization, indicating the scope involves defense-related logistics or supply chain operations. All offerings must meet the technical requirements for environmental safety and regulatory labeling without exception.
Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Radioactive Material Notification & LabelingThis contract mandates the testing, certification, and labeling of materials to identify and manage radioactive content should it exceed established regulatory thresholds, ensuring full compliance with the Defense Federal Acquisition Regulation Supplement and MIL-STD-129 standards. All work must be performed with precision to detect, document, and mark any radioactive contamination in accordance with stringent Department of Defense protocols, particularly for items destined for military use. The requirement extends to accurate documentation and labeling procedures that guarantee traceability and safety throughout the supply chain. The solicitation is classified as a subcontract under NAICS code 541380, indicating it involves other professional, scientific, and technical services, specifically tailored to meet defense logistics needs. The place of performance is fixed at San Diego, California, with a response deadline of August 17, 2026, and the contract was posted on August 5, 2026. The contracting agency is the Maritime Supply Chain within the Department of Defense, emphasizing the critical nature of compliance for maritime and defense-related equipment. Contractors must be prepared to deliver verified, auditable results that affirm adherence to federal regulations governing radioactive material handling and identification.
Testing Laboratories and Services

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
O-RING Supply (NSN 5331001946970)The contract entails the procurement and delivery of 1,163 units of O-RINGs identified by NSN 5331001946970, all of which must meet the quality and packaging standards established by the Defense Logistics Agency. The requirement is part of a subcontract under the Maritime Supply Chain organization within the Department of Defense, with performance obligations centered in San Diego, California, at the zip code 92136-3581. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with the North American Industry Classification System code 332996 indicating the supplier’s focus on other fabricated metal product manufacturing. All delivered items must comply fully with DLA specifications to ensure interoperability and reliability within military systems.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 488510
New
DIBBS
Transportation and FDT Logistics CoordinationThe contract entails logistics coordination for FOB Origin shipments under the Department of Defense’s First Destination Transportation program, requiring precise management of military freight from point of origin to initial military reception points. This includes end-to-end tracking of shipments, integration with DoDAAC and WAWF systems for seamless data exchange, and adherence to Defense Logistics Agency protocols for accountability and visibility throughout the transportation chain. The work is focused on enabling efficient, compliant movement of defense materiel with real-time monitoring and documentation to support operational readiness. Performance is centered at Tinker Air Force Base with a zip code of 73145-8000, and the contract is classified as a subcontract under NAICS code 488510 for support activities for air transportation. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under the Maritime Supply Chain organization within the Department of Defense. All logistics operations must align with FDT standards to ensure accurate, timely, and secure delivery of critical military supplies, with full compliance required for government-wide tracking and reporting systems.
Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and First Article Testing (FAI)The contract requires independent metrology, inspection, and First Article Inspection (FAI) reporting in strict accordance with AS9102 standards to ensure full compliance with Department of Defense quality requirements set by the Maritime Supply Chain. All work must be performed at Tinker Air Force Base with a zip code of 73145-8000, and the scope centers on verifying that initial production parts meet engineering specifications through rigorous dimensional inspection and documented FAI reports. This is a subcontract opportunity classified under NAICS code 541330, indicating it falls within the professional, scientific, and technical services category, specifically for administrative management and general management consulting services relevant to quality assurance. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, with no set-aside provisions identified, meaning any qualified entity may apply. All submissions must adhere to the technical and regulatory expectations defined by DLA and AS9102, with an emphasis on traceability, accuracy, and completeness of inspection documentation to support defense manufacturing standards.
Engineering Services

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561990
New
DIBBS
Military Packaging and Labeling ServicesThe contract requires comprehensive military-compliant packaging, preservation, and labeling of finished fittings in strict adherence to MIL-STD-129, ASTM D3951, and RP001 standards. All components must be properly prepared for military supply chain handling, including the precise application of 2D barcodes and full compliance with WAWF reporting protocols to ensure traceability and system integration across Defense Department logistics. The work must be executed with precision to meet federal military specifications for durability,标识 clarity, and environmental protection during transit and storage. This subcontract is issued under the NAICS code 561990 and is performance-based at Tinker AFB, Oklahoma, with a response deadline of August 17, 2026. The contracting authority is the Department of Defense through the Maritime Supply Chain organization, and all deliverables are expected to align with defense logistics requirements. The contract emphasizes end-to-end compliance with documented military standards and electronic reporting systems to ensure seamless integration into existing defense infrastructure and supply chain operations.
All Other Support Services

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 423520
New
DIBBS
Aluminum Material SupplyThe contract requires the supply of certified aerospace-grade aluminum bar stock or billets, specifically materials such as 6061-T6, intended for the machining of tube nipples in critical defense applications. Full traceability from original mill production through final delivery is mandatory, with comprehensive mill test reports provided for each shipment to verify material composition, mechanical properties, and compliance with aerospace standards. The material must meet stringent quality controls to ensure suitability for high-precision, safety-critical components used in military aerospace systems. Performance of this subcontract is designated for Tinker Air Force Base, Oklahoma, with the Department of Defense through the Maritime Supply Chain as the contracting entity. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 423520 indicates the procurement is for metal and mineral merchant wholesalers, reflecting the procurement's focus on specialized material distribution rather than manufacturing. Suppliers must demonstrate ability to deliver consistent quality, documentation integrity, and on-time fulfillment to meet operational readiness requirements.
Coal and Other Mineral and Ore Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332721
New
DIBBS
Precision Machining of Aerospace FittingsThe contract requires precision CNC machining of aluminum aerospace fittings with specific operations including threading, flaring, and finishing to meet Class 3 tolerances in accordance with SAE AS5174F and AS4841 standards. The work is part of a subcontract under the Department of Defense’s Maritime Supply Chain, with performance located at Tinker AFB, Oklahoma, 73145-8000. The NAICS code 332721 confirms the scope as machine shop services focused on precision components for high-stakes aerospace applications. All deliverables must adhere to stringent aerospace quality requirements, ensuring dimensional accuracy, surface finish, and structural integrity critical for operational safety and reliability. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, providing a twelve-day window for qualified subcontractors to submit proposals. The contract does not specify a set-aside status, meaning it is open to all eligible businesses regardless of size or certification type. While no point of contact is listed, interested parties can access additional information through the provided DIBBS portal link. This opportunity targets experienced machining facilities with proven capability in aerospace-grade aluminum components and a documented history of compliance with military and industry aerospace specifications.
Precision Turned Product Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details