Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WIRE ROPE ASSEMBLY,

Active
SPE4A5-26-T-302BFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for one unit of a wire rope assembly with NSN 4010-01-702-1120, sourced under solicitation SPE4A5-26-T-302B, with a response deadline of July 29, 2026, and a delivery requirement of 166 days after order. The contract incorporates technical and quality requirements identified by R and I numbers from the DLA Master List, and mandates compliance with DLA packaging standards and the removal of government identification from rejected items. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major with verification levels or AQLs assigned accordingly. The item contains technical data subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The place of performance is New Cumberland, Pennsylvania, and the contracting office is the Department of Defense’s ASC Supplier Oper OEM Division, with Hien-Van Trinh listed as the primary point of contact. All covered defense information is protected under RD002 requirements.

General Info

One wire rope assembly, NSN 4010-01-702-1120, delivered in 166 days, subject to ITAR/EAR and strict DLA compliance.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

314994 - Rope, Cordage, Twine, Tire Cord, and Tire Fabric MillsView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-302B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Hien-Van Trinh
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRE ROPE ASSEMBLY,
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4010-01-702-1120 Quantity: 1 EA Purchase Request: 7017528317QTY: 1 Delivery: 166 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 314994
New
DIBBS
ROPE, FIBROUSThe contract is for the procurement of fibrous rope with the NSN 4020-01-657-0034 and a quantity of 1,100 feet, under solicitation SPE8EE-26-T-2155. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, even though packaging must initially comply with ASTM D3951. Packaging and labeling must adhere strictly to MIL-STD-129, with palletization following DLA Packaging Requirements for Procurement, and all units must be marked with the correct Unit of Issue and Quantity per Unit Pack. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and the contractor must deliver within 167 days from the award date, with a required ship date of January 18, 2027. Quantity tolerance allows for a 10% variance above or below the ordered amount. The delivery address is the DLA Distribution San Joaquin facility in Tracy, California, and transportation compliance must follow DLAD Procurement Notes C19 and C20. The contract includes provisions for the removal of government identification from non-accepted supplies and may involve covered defense information. The purchase request number is 7017585975, and the point of contact is Philip Ferrara, with all details tied to the DLA’s authorized unit of issue system.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
CORD, FIBROUSThis contract is for the procurement of fibrous cord under NSN 4020-01-013-4086, specifying Type 1 cord in camouflage green 383, conforming to Fed-Std-595C Chip Number 34094 and MIL-C-83242A Revision A dated 11/11/2025. The cord must be put up on 500-yard spools and packaged in accordance with ASTM D3951, with all labeling and marking strictly following MIL-STD-129. The DLA Master List of Technical and Quality Requirements takes precedence over any other packaging standards. Only manufacturers and distributors listed on the Qualified Suppliers List for Manufacturers (QSLM) or Distributors (QSLD) are eligible to bid, and non-compliance with this requirement constitutes a deviation that must be explicitly declared. The government waives inspection requirements for suppliers who comply with the QSL program, except in cases of Foreign Military Sales. The order quantity is 26 units, each unit being one 500-yard spool, with a unit price of $26.00, totaling $676. Delivery is required FOB origin with no variance allowed in quantity and inspection and acceptance occurring at the destination. The required delivery date is December 24, 2026, with a 167-day allowable delivery window ending January 18, 2027. The item is classified as a critical application item, and the contract is a total small business set-aside under NAICS code 314994. All packaging must be palletized in compliance with DLA packaging requirements, and shipments must be sent to the specified delivery point in Tracy, California. Failure to adhere to QSL program terms may result in criminal penalties in addition to civil remedies.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
CORD, FIBROUS
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
International
F7054-250776 CCG Towlines, Towline Pennants and StretchersThe Canadian Coast Guard is seeking the procurement of type-approved synthetic fiber rope towlines, towline pennants, and stretchers to support operational missions across its fleet of icebreakers, multipurpose vessels, search and rescue lifeboats, and environmental response vessels. All equipment must meet stringent certification and performance standards detailed in the Annex Statement of Requirement to ensure reliability and safety in harsh maritime conditions. The products are intended for use across multiple regions including British Columbia, St. John’s, Halifax, Ontario (excluding the National Capital Region), and Quebec (excluding the National Capital Region), requiring compliance with federal specifications for durability, load capacity, and environmental resilience. Solicitation number WS5725306249, titled F7054-250776 CCG Towlines, Towline Pennants and Stretchers, was posted on July 20, 2026, with a response deadline of August 5, 2026. This federal procurement falls under NAICS code 314994 and is managed by the Department of Public Works and Government Services on behalf of the Government of Canada. Interested parties must submit proposals to Lyne Leger, Contracting Authority, via email at lyne.leger2@tpsgc-pwgsc.gc.ca. The solicitation does not specify any set-aside provisions and is open to qualified suppliers capable of delivering certified equipment that meets all technical and operational demands outlined in the requirements.
Department of Public Works and Government Services

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details
NAICS: 314994
New
DIBBS
Fibrous Cord Manufacturing and SupplyThe contract is for the manufacture and supply of a single unit of fibrous cord identified by NSN 4020002460688, manufactured to meet federal supply specifications and delivered FOB destination. The item falls under the NAICS code 314994, indicating it is part of the miscellaneous textile product manufacturing category. Delivery is arranged under a subcontract, and the contracting agency is the Defense Logistics Agency under the Department of Defense. The award is effective as of July 21, 2026, and the place of performance and point of contact details are not specified in the available data. All work must adhere to applicable federal standards to ensure compliance with the procurement requirements.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 314994
New
DIBBS
Supply of Webbing Straps (NSN 5340012692741)
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 314994
New
DIBBS
WIRE ROPE ASSEMBLY,The contract pertains to the supply of a single unit of a wire rope assembly identified by NSN 4010-01-656-9225 and part number 4164935, with a required delivery within 20 days from the order date, targeting a final delivery deadline of July 21, 2026. The item must be delivered FOB origin with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must conform to MIL-STD-2073-1E, with specific preparation methods including preservation, drying, and containerization as defined by code U, and all markings must comply with MIL-STD-129 without any special marking. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date based on acquisition size. The item is to be palletized per DLA packaging standards and shipped to the central receiving warehouse at Barstow, California, with a parcel post address for the production plant also provided. The contract is issued under solicitation SPE7L1-26-T-856Q, classified under NAICS code 314994, and managed by the Department of Defense’s Land Supply Chain. All performance and delivery obligations are tied to the designated point of contact, Kristina Derry, with responses due by August 3, 2026.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 314994
New
DIBBS
WIRE CORDThe contract pertains to the procurement of a wire cord identified by NSN 4010-01-654-2182 and part number 4-0048, with a sole quantity of one unit to be delivered within ten days of contract award. Delivery is FOB origin and inspection and acceptance occur at the destination, with no tolerance for quantity variance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referencing specific identifiers R, I, RP, RQ, and RD that dictate packaging, marking, and quality standards. Packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA packaging rules, and palletization must follow RP001. The item must be marked per RQ017 and free of government identification if rejected. Sampling shall follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. The supply chain requires traceable shipping methods only, excluding parcel post, with the shipment directed to Fort Stewart, Georgia, under RDD 555 and project code TP 2. The contract is issued under solicitation SPE4A6-26-T-08ZE with a response deadline of July 29, 2026, and the unit of issue is EA, with the supplier obligated to meet all DLA standards that supersede any conflicting commercial specifications.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 314994
New
DIBBS
National Flag Manufacturing and AssemblyThe contract specifies the manufacture of 80 National Flags, Type 1, Class 1, each measuring 5 feet in hoist by 10 feet in fly, in strict compliance with Drawing 6-3-17 and Military Specification MIL-DTL-2692. All production activities, including cutting, sewing, inspection, and packaging, must be completed to meet the required military standards for quality and durability. The work is being procured as a subcontract under the NAICS code 314994, and the requesting organization is C AND T SUPPLY CHAIN, operating under the Department of Defense. The solicitation was posted on July 20, 2026, with a firm deadline for responses on July 27, 2026, and all deliverables must be performed in accordance with the specified technical requirements and timelines.
C AND T SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 314994
New
DIBBS
Fibrous Cord Supply and DeliveryThe contract involves the supply and delivery of 3,000 units of fibrous cord identified by NSN 4020002460688, with delivery terms set at FOB Destination, meaning the supplier is responsible for all transportation costs and risks until the goods reach the designated destination. All materials must comply with military shipping and marking standards to ensure proper handling, identification, and integration within Department of Defense logistics systems. The contract is classified as a subcontract under the NAICS code 314994, which pertains to other textile product mills, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, and the contract award is linked to the DIBBS system under contract number SPE8EE26D0300 with delivery order SPE8EE26F2567. No specific place of performance or point of contact details are provided, and the set-aside type is not applicable.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 314994
New
DIBBS
Fibrous Cord Supply and DeliveryThe contract involves the supply and delivery of two units of fibrous cord identified by NSN 4020002460688 to Fort Jackson, South Carolina, under FOB Destination terms, meaning the seller assumes all costs and risks until the goods reach the specified delivery point. Shipping must be traceable, ensuring full visibility and accountability throughout transit. The contract is classified as a subcontract under NAICS code 314994, which corresponds to other textile product mills, and is administered by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 20, 2026, with no set-aside designation specified, indicating it is open to general competition. All performance and delivery obligations are tied to the designated location at Fort Jackson, with no alternate points of performance noted.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

N/A
View Details
NAICS: 314994
New
DIBBS
Manufacture of Military Rank Insignia (Textile/Emblem Production)The contract requires the full manufacturing of 12,000 military rank insignia units, encompassing all aspects of production including embroidery, sourcing of approved materials, rigorous quality control procedures, secure packaging, and comprehensive traceability documentation aligned with Defense Logistics Agency standards. Every phase of the work must adhere to strict military specifications to ensure durability, consistency, and compliance with federal imaging and identification protocols for armed forces personnel. This is a small business set-aside subcontract under NAICS code 314994, exclusively open to small businesses as defined by the Small Business Administration, and is administered by the Department of Defense through C AND T SUPPLY CHAIN. The solicitation was posted on July 20, 2026, with responses due by July 24, 2026, indicating a tight four-day window for proposals. The place of performance and specific delivery location are not defined, requiring the contractor to confirm logistics details directly with the contracting office, and all documentation must support full accountability from raw material to final shipment.
C AND T SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 339991
New
DIBBS
GASKET AND SEAL SETThe contract pertains to the procurement of a GASKET AND SEAL SET with NSN 5330-01-308-3522, designated as a Navy Critical Safety Item, requiring strict adherence to technical, quality, and security protocols. Compliance is governed by referenced DLA Master List requirements identified by R and I numbers, with applicable revisions tied to either the solicitation or award date depending on acquisition size. The supplier must meet stringent documentation mandates including a Source Approval Request, Cybersecurity Maturity Model Certification Level 2 Self-Assessment, and adherence to DLA packaging standards. Inspection and acceptance occur at origin, with non-accepted items requiring removal of government identification, and all items must be physically marked per RQ017, including contractor and manufacturer CAGE codes, part number, and lot or serial number, though Item Unique Identification is not required. Sampling follows MIL-STD-1916 or ASQ H1331 with zero defects permitted unless otherwise specified, and measuring equipment must comply with RT001 standards. All technical data is controlled under ITAR or EAR, prohibiting export without authorization and restricting access to contractors with approved JCP certification, completed DOD export training, and DLA approval. DFARS 252.225-7048 applies to all technical data handling. Packaging and marking must conform to MIL-STD-129, and any waivers or deviations require formal approval from the DSC Contracting Officer. Delivery is due within 333 days after contract award.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334519
New
DIBBS
TRANSDUCER, MOTIONAL PIThe contract is for the procurement of three transducers, motional PI, identified by NSN 6695-01-737-0929, under solicitation SPE4A5-26-Q-0640, with a response deadline of August 5, 2026, and a delivery requirement of 136 days after award. The item is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the contractor must comply with DLA packaging standards, configuration change management procedures, and documentation requirements for source approval requests. Technical data associated with the transducer is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons—even within the United States—is strictly prohibited without prior authorization from the Department of State or Department of Commerce; DFARS 252.225-7048 governs this restriction. Access to this controlled data is limited to contractors who hold a valid US/Canada Joint Certification Program certification, have completed required DOD export control training, and have received formal approval from DLA. Additionally, all supplies must be properly marked per physical identification requirements, and government identification must be removed from non-accepted items. The contract falls under a federal acquisition with performance location in Tracy, California, and primary point of contact is Hannah Song of the Department of Defense’s ASC Supplier Operations OEM Division.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332111
New
DIBBS
SHAFT, TURBINE, AIRCRAFTThe contract pertains to the procurement of two aircraft gas turbine engine turbine shafts, identified by NSN 2840-00-837-2071 and part number 3011095, manufactured by Pratt & Whitney Canada Corp and sourced through the Canadian Commercial Corporation. This is a Critical Safety Item designated by the Air Force, subject to stringent quality and cybersecurity controls including CMMC Level 2 self-assessment and compliance with SAE AS9100 for non-tailored higher-level quality requirements. Manufacturing must follow a forging process, requiring specialized tooling, and all supplies must adhere to MIL-STD-129 marking standards with lot and serial numbers, contractor and manufacturer cage codes, and part numbers included on each unit pack. Inspection and acceptance occur at origin under zero-defect sampling principles per MIL-STD-1916 or comparable zero-based plans, with attributes classified as critical, major, or minor assigned specific verification levels or AQLs. Tooling and sourcing inquiries must be directed to designated DLA supply chain teams. The item must be packaged per MIL-STD-2073-1E with specified preservation methods and materials, and palletized according to DLA packaging requirements. Delivery is due in 88 days after award under a firm fixed price structure with no tolerance for quantity variance. All waivers or deviations require formal approval from the DSC Contracting Officer, and the item is subject to Covered Defense Information protocols and government identification removal procedures for non-accepted items.
Iron and Steel Forging

POSTED

about 4 hours ago

DEADLINE

in 5 days
View Details
NAICS: 334519
New
DIBBS
BEZEL, INSTRUMENT MOUNTThe contract specifies the procurement of a single unit of a BEZEL, INSTRUMENT MOUNTING with NSN 6695-01-122-7941 and part number AM11085, manufactured by ONTIC ENGINEERING & MANUFACTURING UK. The item is classified as a critical application component and must comply with a range of technical, quality, and packaging standards including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Packaging and palletization must conform to DLA’s procurement requirements, and the item is subject to zero tolerance for quantity variance. Inspection and acceptance occur at the destination, with delivery required FOB origin within 171 days of contract award, targeting January 18, 2027, as the needed ship date. Sampling for quality verification must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The supplier must hold a CMMC Level 2 self-assessment, and documentation for source approval is required. The item is not required to include Unique Item Identification per DFARS 252.211-7003(c)(1)(i). All technical and quality requirements referenced are governed by the DLA Master List, with revisions tied to the solicitation issue or award date. Delivery is directed to DLA Distribution San Diego, and transportation protocols must align with DLA procedural notes C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339991
New
DIBBS
RETAINER, SEALThis contract specifies the procurement of a retainer and seal with part number 411T1141-18B and NSN 5330016527881, requiring delivery of one unit within 20 days FOB origin to Fort Hood, Texas. The item is classified as a critical application component under Boeing’s specification and must comply with stringent technical and quality requirements referenced from the DLA Master List, including configuration change management, supply chain traceability per DLA Directive Procurement Note C03, and FAA bare item marking standards. The contractor must retain traceability documentation and meet specific packaging and marking mandates, including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1 to protect against UV degradation. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances accepted unless otherwise stated, and attributes are to be verified at designated levels corresponding to AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. A Certificate of Airworthiness and Conformance is mandatory for FAA-certified parts per RQ019 and Proc Note L32. Delivery must occur via traceable freight methods, exclude parcel post, and align with the required delivery date of July 10, 2026. The contract enforces a zero variance in quantity and requires inspection and acceptance at destination.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BALL AND SEAT ASSEMThe contract pertains to the procurement of three BALL AND SEAT ASSEM units, identified by NSN 1630-01-036-6507, under solicitation SPE4A5-26-T-305D, with a response deadline of July 30, 2026, and a delivery requirement of 170 days after award. The item is not subject to Item Unique Identification per the Service customer’s request, and no shelf life restrictions apply. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the contract incorporates DLA packaging standards, requirements for the removal of government identification from non-accepted supplies, and physical marking of bare items. Documentation for source approval requests is required, and measuring and test equipment must meet adequate data standards. The place of performance is Tracy, California, with Courtney Minor of the ASC Supplier Oper OEM Division listed as the primary point of contact. The NAICS code 336413 indicates this is for aircraft and spacecraft component manufacturing, and the contracting agency is the Department of Defense.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
LEVER, FUEL CONTROLThis contract specifies the procurement of a lever fuel control item identified by NSN 2915-00-565-7132 and part number 755116-1 from ONTIC ENGINEERING & MANUFACTURING, INC, with a quantity of four units to be delivered within 255 days after contract award. The item is designated as a critical safety item and a critical application item by the Air Force, requiring strict compliance with all associated technical and quality standards, including SAE AS9100 for higher-level quality requirements. Documentation must adhere to DLA’s Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. Packaging must follow MIL-STD-2073-1E and DLA Packaging Requirements, including marking in accordance with MIL-STD-129, with each unit labeled with lot and serial numbers, contractor and manufacturer cage codes, and part number. Physical identification and bare item marking are required, though item unique identification is waived per customer request. The contract mandates inspection and acceptance at origin, with no variance allowed in quantity delivery. All packaging must be palletized per RP001 and shipped to the designated DLA Distribution Depot in Tinker AFB, Oklahoma. Cybersecurity requirements include CMMC Level 2 self-assessment and compliance with Covered Defense Information protocols. Measuring and test equipment must be calibrated and documented per RT001, and all supplier requests for waivers or deviations must be submitted to the DSC Contracting Officer for approval. The acquisition is governed by DLA’s authorized unit of issue and references specific quality assurance procedures including QAP-13873 and QAP-106 Rev B. Delivery is FOB origin, with freight and transportation procedures governed by DLAD Proc Notes C19 and C20. The contract solicitation number is SPE4A5-26-Q-0639, issued on July 22, 2026, with response deadline July 28, 2026, and the government’s material need date is September 6, 2027.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 488190
New
DIBBS
PACKING, PREFORMEDThis contract pertains to the procurement of preformed packing items identified by NSN 5330-01-478-2010, with a quantity of 48 units to be delivered within 170 days from the contract award, FOB origin. The packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with all components sealed in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, and stock shipments. Packaging and palletization must comply with DLA’s specific requirements, including the use of GB wrap, JB cushioning, and designated intermediate containers. The item is classified as a critical application under Hamilton Sundstrand Corporation part numbers 772746, and unit identification is not required per Service customer request, with DFARS 252.211-7003(c)(1)(i) applicable. All technical and quality mandates referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation or award date depending on acquisition size. Sampling protocols require conformity to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and attributes must be verified at specified levels: VII for critical, IV for major, and II for minor, corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Configuration changes require formal engineering change proposals or variance requests, and cybersecurity compliance mandates a CMMC Level 2 self-assessment. Measuring and test equipment must meet RT001 standards, and hazardous materials packaging follows IP025 guidelines. The delivery destination is DLA Distribution San Diego, with a required ship date of January 17, 2027 and original delivery deadline of September 14, 2027. Pricing and contract line item details remain fixed with zero variance tolerance, and all documentation must align with DLA’s procurement and logistics protocols, including transportation references to DLAD Proc Notes C19 and C20.
Other Support Activities for Air Transportation

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTINGThis contract pertains to the procurement of a fitting identified by NSN 1560-01-256-2172 and part number 209-064-224-101, manufactured via a metal casting process requiring specialized tooling. The item is classified as a critical application item and must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling procedures governed by MIL-STD-1916 or ASQ H1331 Table 1, enforcing zero non-conformances unless otherwise stated. Attributes are assigned specific verification levels or AQLs, and all marking and packaging must adhere to MIL-STD-129 and MIL-STD-2073-1E, with palletization following DLA packaging requirements. The item is to be delivered FOB origin within 20 days, with no variance allowed in quantity, and inspection and acceptance occur at the point of origin. The contractor is required to meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment standards and must submit documentation for source approval as outlined in RC001. The delivery destination is the Taiwan Army Zuo-Ying Ammunition Sub facility, with freight forwarding instructions referencing DLAD procedural notes. The purchase request number is 7017584377 with a total price of $144.00 for 12 units at $12.00 each, and the contract is issued under solicitation SPE4A5-26-T-304U with an original delivery deadline of July 24, 2026. The supplier must utilize the designated unit of issue and comply with all government-specific identifiers and data codes, including the manufacturer's code PTWZ5V62012654 and project code TP 2. Direct contact for sourcing, tooling, or material assistance is provided through DLA’s Aviation or Land and Maritime Supply Chain teams.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, FIBE
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Electronic Connector Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
CLIP, RETAINING
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details