This Solicitation opportunity from Department Of Defense was posted on July 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

WIRE ROPE ASSEMBLY,

Closed

SPE4A5-26-T-313LFederal

Submission Closed08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7LX-26-U-9811

Solicitation SPE7LX-26-U-9811 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Strategic Acquisition Program Directorate, for the procurement of O-rings under NSN 5331-01-078-5127. This is a total small business set-aside under NAICS code 332618. The procurement may result in a unilateral indefinite delivery contract with a maximum value of 350,000 dollars, an estimated annual quantity of 481 units, and a guaranteed minimum of 72 units. Delivery is required within 88 days after receipt of order, with shipping terms set as FOB Origin. The contract mandates strict quality and material standards, requiring that all supplied items be free of asbestos and that mercury or mercury-containing compounds not be intentionally added. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must adhere to MIL-STD-129. Inspection and acceptance will occur at the destination. Award evaluation is based on price, and the contract incorporates various FAR and DFARS clauses, including requirements for CMMC Level 2 self-assessment and the use of the Wide Area WorkFlow system for electronic invoicing. Offerors must also comply with the Buy American Act and the Berry Amendment regarding domestic material restrictions.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PIN, SHOULDER, HEADLE

Solicitation # SPE4A7-26-T-715G

This solicitation, identified as SPE4A7-26-T-715G, is issued by the Department of Defense ASC Supplier Oper AE and AF Div for the procurement of ten headless shoulder pins under NSN 5315-01-577-3247. The contract requires delivery within 10 days after receipt of order and specifies performance at Fort Campbell. The response deadline for this federal solicitation is September 11, 2026. The agreement incorporates several critical regulatory and technical requirements, including DLA packaging standards and the protection of covered defense information. Suppliers must adhere to the DLA Master List of Technical and Quality Requirements and ensure the removal of government identification from any non-accepted supplies. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components as defined by NAVSEA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Quick Release Pins

POSTED

DEADLINE

53--PIN,QUICK RELEASE

Solicitation # SPE7L1-26-T-11C8

Solicitation SPE7L1-26-T-11C8 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 11 quick release pins (NSN 5315017276779). This is a fixed-price contract and a total small business set-aside under NAICS code 332618. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS). The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with shipping terms set as FOB Origin under the First Destination Transportation program. Inspection and acceptance will occur at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Offerors must comply with the Buy American Act and the Berry Amendment, and any hazardous materials must be labeled according to the Hazard Communication Standard. Invoicing and payment processing are required through the Wide Area Workflow (WAWF) system.

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-01-181-4941)

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-01-007-4895)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialized Wire and Connector Supply

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Stainless Steel Tensioner Belt

Defense Logistics Agency

POSTED

DEADLINE

Supply of Straight Headless Pins (NSN 5315-01-552-1148)

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of PRI-Accredited Synthetic Rubber O-Rings

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-392R

This contract is for the procurement of synthetic rubber O-rings, specifically part number MS29513-155 under NSN 5331005293723. The requirement consists of two line items totaling 451 units, with 225 units destined for DLA Distribution New Cumberland and 226 units for DLA Distribution Barstow. The items must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturer List (QML) or Qualified Products List (QPL) and must adhere to SAE AS29513 and SAE AMS-P-5315C standards. Key technical requirements include a non-extendable shelf life of 180 months and a strict prohibition on the intentional addition of mercury or asbestos. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, utilizing medium-duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Delivery is required within 105 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SWA GING SLEEVE, WIRE

Solicitation # SPE4A6-26-R-XD83

Solicitation SPE4A6-26-R-XD83 is a Total Small Business Set-Aside issued by the DLA Aviation ASC Commodities Division for the procurement of wire rope swaging sleeves (NSN 4030004315537). The requirement is structured as a Simplified Indefinite-Delivery Contract (SIDC) with a five-year term or a total aggregate ceiling of 350,000 dollars. The scope includes a guaranteed minimum quantity of 173 units for the first base year, with delivery order ranges between 173 and 700 units, and a monthly wartime surge rate of 56 units starting 30 days after order. Supplies are to be delivered to various CONUS stock locations with inspection and acceptance occurring at the source. Technical requirements specify zinc coating per ASTM B633 and adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, contractors must maintain an approved US/Canada Joint Certification Program certification to comply with ITAR or EAR export controls. Award decisions will be based on the most advantageous offer, weighing price, past performance (with a heavy emphasis on SPRS assessments), and quoted delivery. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with CMMC Level 2 cybersecurity standards. Quotations were due by September 21, 2026.

ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 9 days

AI Contract Overview

The contract mandates the supply of a wire rope assembly under NSN 4010-99-973-8550 with a quantity of six units, subject to strict technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede any other material specifications. Compliance with MIL-STD-1916 or ASQ H1331 is required for sampling, with zero non-conformances mandated unless otherwise specified, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 if critical, major, or minor. The item is designated as a critical application with no shelf life requirement, and unit identification is waived per DFARS 252.211-7003(c)(1)(i). Packaging must conform to ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 requirements, and all markings must adhere to RQ017 for bare item identification and RQ011 for removal of government identifiers from non-accepted items. Documentation for source approval is governed by RC001, and deliveries are FOB origin with inspection and acceptance occurring at destination. The delivery window is 227 days from contract award, with a required ship date of March 22, 2027, and the freight destination is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract number is SPE4A5-26-T-313L, issued under NAICS code 332618, with sole point of contact Hien-Van Trinh at the Department of Defense.

General Info

Six wire rope assemblies under NSN 4010-99-973-8550, FOB origin, deliver to New Cumberland by March 22, 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

RFQ SPE4A5-26-T-313L Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 29

Solicitation

Response DeadlineAug 6

Deadline has passed

Submission Closed

08/06/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressUSA

Contacts

Hien-Van Trinh

contact@example.gov

+1 (555) 000-0000

Full Description

WIRE ROPE ASSEMBLY,
WIRE ROPE ASSEMBLY<(>,<)>
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
KNDS DEFENCE UK LIMITED K7705 P/N G419/4881 ITEM 1
KNDS DEFENCE UK LIMITED K7705 P/N G419/4881/1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A5-26-T-313L
SECTION B
PR: 7017226172 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017226172 0001 EA 6.000
NSN/MATERIAL:4010999738550
DELIVERY (IN DAYS):0227
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/22/2027 Original Required Delivery Date:03/22/2027
SPE4A5-26-T-313L NSN/Part Number: 4010-99-973-8550 Quantity: 6 EA Purchase Request: 7017226172QTY: 6 Delivery: 227 days ADO