Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Wire Rope Assembly Manufacturing and Delivery

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture, inspection, marking, packaging, and delivery of 100 single-leg wire rope assemblies identified by NSN 4010013122642, all of which must meet strict military specifications and support CSI traceability requirements to ensure full accountability and quality control throughout the supply chain. The work must be performed in accordance with applicable defense standards, with attention to precise fabrication, rigorous inspection protocols, and proper documentation to guarantee compliance and operational readiness. This subcontract, issued under NAICS code 332420, is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense and has a performance location at Hill AFB with ZIP code 84056-5734. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, providing a seven-day window for submission. All deliverables must be fully traceable and conform to the exact technical and logistical expectations outlined by the contracting authority, emphasizing reliability, durability, and adherence to documented military protocols.

General Info

Manufacture and deliver 100 military-spec wire rope assemblies with full CSI traceability by August 5, 2026, to Hill AFB.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332420 - Metal Tank (Heavy Gauge) ManufacturingView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, inspect, mark, package, and deliver 100 units of a single-leg wire rope assembly (NSN: 4010013122642) in compliance with military standards and CSI traceability requirements.

Similar Contracts

Same NAICS industry code

Pressure Vessel Tank

Solicitation # N0017326Q5833

The Naval Research Laboratory intends to award a sole source purchase order to AA TANKS, LLC of Warren, MI, for the procurement of a Pressure Vessel Tank under the Federal Supply Code 8120 and NAICS code 332420, with a size standard of 750 employees. This action is justified by the determination that only this single responsible source can meet the agency’s specific requirements, and no other supplies or services will suffice. The acquisition will be conducted using Simplified Acquisition Procedures under FAR Part 13.106-1(b) for an estimated value not to exceed $350,000.00. Interested parties may submit information demonstrating their capability and why competition would benefit the government, but responses will only be used to evaluate whether to proceed with a competitive process—the government retains full discretion to proceed noncompetitively. All submissions must reference solicitation number N0017326Q5833 and be received by August 3, 2026. No costs incurred in responding to this notice will be reimbursed, and no solicitation package is available. The point of contact for inquiries is Yina Brooks via email at yina.brooks.civ@us.navy.mil, and the transaction will be handled by the Department of Defense office located in Washington, DC.

Naval Research Laboratory

POSTED

about 20 hours ago

DEADLINE

Refrigerated Storage Container Supply and DeliveryThe Texas Department of Criminal Justice is seeking a subcontractor to supply and deliver a fully operational refrigerated storage container to its facility in Bridgeport, Texas. The contract requires the contractor to provide a unit that meets all specified technical and functional standards for refrigerated storage, ensuring it is ready for immediate use upon arrival. The scope may also include coordination with site personnel and verification that utilities and infrastructure at the location are prepared to support the container’s operation, though specific site readiness requirements are not detailed. The equipment must be delivered and installed in accordance with TDCJ standards and timelines. The solicitation is open to qualified subcontractors with experience in the manufacture or supply of refrigerated storage units, classified under NAICS code 332420 for refrigeration and HVAC equipment manufacturing. Responses must be submitted by August 11, 2026, and the contract will be awarded through the Texas SmartBuy portal. While no set-aside designation is specified, bidders are expected to demonstrate capability in handling secure, government-grade storage solutions and managing logistics for state facility deliveries. No point of contact information is provided, and all inquiries should be directed through the official portal link.

Texas Department of Criminal Justice

POSTED

DEADLINE

Solicitation # IW254756

The Texas Department of Criminal Justice is soliciting bids for the procurement of steam kettles under solicitation number IW254756, with the request posted on July 28, 2026, and responses due by August 12, 2026. This procurement is intended to support operational needs within Texas correctional facilities, with all delivered items required to be性能 at locations under the jurisdiction of the Texas Department of Criminal Justice. The contract is managed by Donna Gardner, who serves as the primary point of contact and can be reached via phone at 936-437-3859 or email at donna.gardner@tdcj.texas.gov. Bidders must submit proposals through the Texas SmartBuy portal, and no set-aside provisions have been designated for this solicitation. The department is seeking reliable, commercially available steam kettles suitable for institutional food service applications, though specific technical specifications are not detailed in the public posting. All interested vendors are expected to comply with general state procurement standards and deliver products that meet functional and safety requirements for use in correctional environments.

Texas Department of Criminal Justice

POSTED

DEADLINE

Precision Metal Fabrication of Connecting Link, RigThe contract requires the manufacture of 14 military-spec connecting links according to specified technical drawings, with all units subject to proof load testing to ensure structural integrity and compliance with defense standards. Each link must be marked with an individual item identification (IUID) to maintain traceability through the military supply chain. The work falls under NAICS code 332420, indicating precision metal fabrication, and is classified as a subcontract under the Department of Defense’s Land Supply Chain. Performance is to be conducted at a location in San Diego, California, with a zip code of 92136-3581. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, providing a two-week window for qualified vendors to submit proposals. The contract does not specify a set-aside type or point of contact, but the reference to a DIBBS portal indicates it is posted through the Defense Logistics Agency’s procurement system for potential subcontractors to access.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Shipping and Storage Containers (Miscellaneous)The contract calls for the procurement and delivery of six military-spec shipping and storage containers that must fully comply with MIL-STD-2073-1E and MIL-STD-129 packaging standards, ensuring they meet rigorous Department of Defense requirements for durability, labeling, and environmental protection. These containers are intended for secure military logistics use and must be manufactured to withstand harsh conditions during transport and long-term storage while maintaining strict documentation and identification protocols dictated by the standards. The solicitation is issued under the NAICS code 332420, classifying it as a subcontract for fabricated metal product manufacturing, and is managed by the Department of Defense through the Construction & Equipment MRO SVC I organization. The place of performance is designated as New Cumberland, Pennsylvania, with a response deadline of August 10, 2026, and the opportunity was posted on July 28, 2026. All submissions must adhere to the technical specifications outlined in the referenced military standards, and the contractor is expected to deliver fully certified units with appropriate documentation to support compliance verification.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Cradle Kit Manufacturing and SupplyThe contract pertains to the manufacture and supply of a military-spec cradle kit identified by NSN 8145015121025 and part number 150475, designed for shipping and support applications in defense logistics. The product must meet all applicable Department of Defense Logistics Agency standards, ensuring durability, compatibility, and compliance with military-grade requirements for transport and handling of sensitive equipment. The contract is structured as a subcontract under the NAICS code 332420, which classifies it within the forged and stamped metal product manufacturing sector, indicating that the cradle kit involves precision metal fabrication and assembly processes. The solicitation, posted on July 28, 2026, requires proposals to be submitted no later than August 10, 2026, and is managed by the Department of Defense through the Construction & Equipment Containers organization. The place of performance and point of contact details are unspecified, but performance is expected to align with DLA’s logistics framework. The contract will be administered via the DIBBS platform, and successful bidders must demonstrate capability to deliver fully compliant units on schedule, adhering to all technical and regulatory specifications without reliance on external documentation or citations.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Welding Electrode Manufacturing and SupplyThe contract requires the manufacture and supply of welding electrodes with a diameter of 3/32 inch and a length of 12 inches, manufactured to meet the specifications outlined in AWS A5.15-90. These electrodes must be packaged in 10-pound containers and fully compliant with Defense Logistics Agency preservation standards, ensuring long-term storage integrity and operational readiness. All materials must adhere to hazardous materials handling and transportation regulations, reflecting the stringent safety and compliance protocols mandated by the Department of Defense. The solicitation is issued as a subcontract under NAICS code 332420, indicating it is related to wire, pipe, and other metal product manufacturing. It was posted on July 28, 2026, with a response deadline of August 10, 2026, and the contracting authority is the Defense Logistics Agency. The performance location and point of contact details are not specified, but the work is intended to support defense-related operations governed by DLA standards. Interested parties must submit proposals through the official DIBBS portal before the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

Welding Electrode Manufacturing & SupplyThe contract requires the manufacture and supply of flux-coated welding electrodes measuring 0.125 inches in diameter by 14 inches in length, packaged in hermetically sealed 10-pound containers to ensure protection against moisture and environmental degradation. All products must meet the technical specifications outlined in AWS A5.15-90 and comply with established military packaging standards to ensure performance and longevity under demanding operational conditions. The electrodes are intended for use in critical defense applications where reliability and consistency are essential. The solicitation is issued as a subcontract under NAICS code 332420, which classifies the industry as Welding and Soldering Equipment Manufacturing, and is managed by the Department of Defense under its Packaging Requirements for Procurement Unit Container program. The opportunity was posted on July 28, 2026, with a mandatory response deadline of August 10, 2026. While specific performance locations and point of contact details are not provided, bidders are expected to adhere strictly to all packaging, labeling, and quality assurance requirements tied to defense procurement protocols. The full solicitation can be accessed through the DIBBS portal using the provided link.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT UNIT CONTAINER SHALL BE

POSTED

DEADLINE

Commercial Fire Extinguisher SupplyThe contract entails the procurement and supply of a military-specification fire extinguisher identified by NSN 4210015155560, ensuring full compliance with hazardous materials handling and packaging standards. This requirement is issued as a subcontract under the NAICS code 332420, which pertains to other fabricated metal product manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The extinguisher must meet exacting military performance and safety criteria to support operational readiness in defense environments. The solicitation is open for responses until August 10, 2026, with performance to be conducted at Silverdale, Washington, ZIP code 98315-7000. The contract is not subject to any specific set-aside designation and is being issued through the DLA’s procurement system. Interested parties must ensure their submissions align with all technical, logistical, and regulatory requirements for military-grade fire suppression equipment, including appropriate documentation for hazardous material transport and storage. All communications and submissions should reference the RFQ through the provided DIBBS portal link.

Defense Logistics Agency

POSTED

DEADLINE

Scoop-Type Bucket Supply and DeliveryA military-spec scoop-type bucket is being solicited for supply and delivery to Fort Bliss, Texas, under a subcontract aligned with federal packaging, marking, and shipping standards. The requirement is classified under NAICS code 332420, indicating manufacturing of metal forgings and stampings, and is issued by the Department of Defense under the organization Construction & Equipment Manu & Con. All items must meet exacting military specifications and be delivered to the designated location with zip code 79918-0000. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with no set-aside provisions specified. The procurement is managed through the DIBBS system and requires full compliance with defense logistics standards without any identified point of contact information provided.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Wire Rope Terminal (NSN 4030-00-580-6779)The contract requires the manufacture or supply of four units of Wire Rope Terminal with Stud, identified by National Stock Number 4030-00-580-6779 and part number MS21260-7RH, fully compliant with applicable military standards including Qualification Product List and Qualified Manufacturer List requirements. This is a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with performance expected at Huntsville, Alabama, 35824. The solicitation was posted on July 28, 2026, and responses must be submitted by August 5, 2026. The North American Industry Classification System code 332420 applies, indicating the work falls under forging and stamping. All deliveries must meet stringent military specifications to ensure compatibility and reliability in defense applications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Metal Fabrication and Machining of SADDLE, CYLINDERThe contract involves the precision manufacture of a cylindrical saddle component used in aircraft launch and recovery equipment, requiring advanced metal fabrication, forming, and machining processes to meet stringent defense quality standards. The component must be assembled to exacting tolerances, ensuring reliability and performance in high-stress operational environments typical of naval aviation systems. All work must comply with industry-specific defense specifications and quality control protocols, with an emphasis on traceability, material integrity, and dimensional accuracy throughout production. This is a small business set-aside contract under the SBA’s Total Small Business Set-Aside program, exclusively available to qualified small businesses as defined by the NAICS code 332420 for fabricated metal product manufacturing. The solicitation, posted on July 28, 2026, requires responses by August 5, 2026, and the performance location is specified as San Diego, California, with a ZIP code of 92136-3581. The contracting activity falls under the Department of Defense’s Nuclear Reactor Program, though the nature of the component suggests application in aircraft systems rather than nuclear propulsion, indicating potential cross-program support or administrative alignment within the broader defense infrastructure.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

PARTS KIT, ELECTRONI

Solicitation # SPE4A5-26-T-312T

This contract pertains to a Parts Kit, Electronic with NSN 5895-01-587-8342, requiring the delivery of 162 kits under solicitation SPE4A5-26-T-312T. The kits must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. The kit must be assembled and packaged per MIL-STD-2073-1E Appendix D, with all components contained in a single box sufficient to prevent damage, properly cushioned to inhibit movement, and labeled with a detailed contents list including part numbers, NSNs, and quantities per kit. Marking and barcoding must conform to MIL-STD-129, and palletization must meet DLA packaging requirements. No unique item identification is required per customer direction, and sampling follows MIL-STD-1916 or equivalent zero-based plans with acceptance criteria of zero non-conformances unless otherwise specified in the contract. Delivery is mandated FOB origin within 95 days, with inspection and acceptance occurring at destination, and no variance in quantity is permitted. The preservation method is specified as preservative type 10 with dry packaging, using the materials and methods prescribed in the contract, and all packaging must be labeled with the code U without special marking. The delivery address is DLA Distribution Red River in Texarkana, TX, with a required ship date of November 10, 2026, and an original required delivery date of March 3, 2028. The item is classified as a Critical Application Item by The Boeing Company, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Documentation for source approval, configuration change management, and removal of government identification from non-accepted items are mandated, with all supply chain activities subject to defense information protection and transportation guidelines as outlined in DLA procedural notes.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A5-26-T-313E

This contract pertains to the procurement of a structural panel designated as PANEL, STRUCTURAL, AI with part number 145T4897-123 and NSN 1560016558444, for a quantity of four units at a unit price of $4.00, totaling $16.00. Delivery is required within 198 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination warehouse in Tracy, California. The item is classified as a critical application item under The Boeing Company and must comply with stringent technical and quality requirements referenced through the DLA Master List, including configuration change management, supply chain traceability documentation per DLA Directive Procurement Note C03, and FAA-specific marking and airworthiness certification requirements. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific preservation methods, container types, and palletization as dictated by DLA Packaging Requirements. No government identification removal or unit identification marking is required per customer direction, and sampling follows MIL-STD-1916 or comparable zero-based plans with zero non-conformances unless otherwise specified. The contractor is also subject to cybersecurity compliance under CMMC Level 2 Self-Assessment and must retain full supply chain traceability records in accordance with DLA guidance. Transportation and freight shipping instructions follow DLAD Proc Notes C19 and C20, with the same destination as the parcel post address. The contract includes applicable CDRLs and references to the Technical Data Package, particularly Quality Assurance Provision 13873 and CDRL-FAACERTCOM-25015, dated January 14, 2025. Compliance with higher-level quality requirements outlined in Procurement Note L32 is mandatory, and all marking, packing, and documentation must align with FAA and DLA specifications. The solicitation number is SPE4A5-26-T-313E, with a response deadline of August 6, 2026, and a required delivery date of December 20, 2025, while the need ship date is set for May 12, 2026. The NAICS code is 336413, and the contracting office is the ASC Supplier Oper OEM Division, Department of Defense.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-312V

This contract, identified as SPE4A5-26-T-312V, pertains to the procurement of 176 units of Welded Chain with NSN 4010-01-058-4771, under a solicitation issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION. The delivery is scheduled 618 days after award, and no fast pay provisions apply. The contractor is required to conduct First Article Testing on two units of the specified item and submit a formal test report within 60 calendar days of contract award, with prior written notice given at least 14 days before shipment for Government Final Acceptance Testing. The Government has 30 days after receiving the report to issue written approval, conditional approval, or disapproval. Production Lot Testing is mandatory following First Article approval, requiring the contractor to test ten randomly selected samples from the production batch, with full lot rejection if any sample fails. All PLT testing must be notified to the Contracting Officer and Quality Assurance Representative 14 days in advance, and all test results must be documented per DI-NDTI-80809B, accompanied by DD Form 1222, DD Form 250, process certifications, inspection sheets, and marked drawings. The contractor must also cover the cost of materials consumed during testing within the CLIN pricing and ensure all documentation provided with shipments meets Government requirements for traceability and confidentiality. The place of performance is New Cumberland, PA, with Hien-Van Trinh serving as the primary point of contact.

Other Fabricated Wire Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-312W

The contract pertains to the procurement of seven units of a pedal bracket identified by NSN 1680-01-608-8421, with a delivery requirement of 128 days after order. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Source approval documentation is mandated, and the item is subject to covered defense information and Cybersecurity Maturity Model Certification Level 2 self-assessment requirements. Packaging must comply with DLA specifications, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, though item unique identification is not mandated per the service customer’s request and DFARS 252.211-7003(c)(1)(i). Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including within the U.S., and requiring compliance with DFARS 252.225-7048. Access to such data is restricted to contractors approved by DLA who hold a valid US/Canada Joint Certification Program certification and have completed mandatory training and questionnaire requirements. The solicitation, numbered SPE4A5-26-T-312W, was posted on July 29, 2026, with responses due by August 6, 2026, under NAICS code 336413. Performance is to be delivered to Corpus Christi, Texas, 78419-5255, with primary point of contact Renee Wassum at DLA.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE4A5-26-T-312U

Offerors must comply with strict domestic material requirements under the Berry Amendment, Buy American Act, and related clauses, with the Berry threshold lowered to $150,000, necessitating full disclosure of any non-domestic materials in quotes. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and no items produced via additive manufacturing may be included without prior written approval. Quoters are strongly encouraged to provide quantity ranges due to fluctuating demand, ensuring flexibility for buyers without requiring resolicitation, though this does not apply to Auto IDC. Small business joint ventures must submit all required certifications under FAR provisions 52.212-3 and 52.219-1 for applicable categories. All contractors must register through the new DLA Account Management & Provisioning System (AMPS) within two months to access the Vendor Shipment Module and maintain shipping capability, with WebServices users required to update their schema by the specified date. Failure to register or update will result in loss of shipping access. Offerors unable to quote by the closing date must submit a “No Bid” on DIBBS with an anticipated quote date or reason to avoid assumption of non-procurability. Fast Pay is not applicable, and the item in question is a drive housing, quantity two, with a 183-day delivery window under solicitation SPE4A5-26-T-312U, managed by the Department of Defense’s ASC Supplier Operations OEM Division.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 15 hours ago

DEADLINE

GAGE, PRESSURE, DIAL IND

Solicitation # SPE4A5-26-Q-0655

The contract pertains to the procurement of 13 units of a pressure dial indicating gage with NSN 6685-01-539-5318 under solicitation SPE4A5-26-Q-0655, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 52 days after award, with inspection and acceptance occurring at the destination. Packaging must comply with DLA’s RP001 requirements, adhering to MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is classified hazardous under FED-STD-313, in which case TQ requirement IP025 applies. The DLA Master List of Technical and Quality Requirements governs all technical and quality standards, superseding other specifications. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute verification levels are fixed at VII, IV, and II for critical, major, and minor characteristics respectively. Palletization must conform to RP001, and unit of issue is specified as each. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation protocols aligned to DLAD PROC NOTE C19 and C20. The procurement is for a federal customer with a material need date of February 20, 2026.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

LEAD, ELECTRICAL

Solicitation # SPE4A5-26-T-312Q

The contract pertains to the procurement of four electrical leads, part number 373111-5, supplied by Honeywell International Inc., under the NSN 6150008380246, with a total price of $16.00 at $4.00 per unit. Delivery is required within 20 days FOB origin to Fort Wainwright, Alaska, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly follow MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging and palletization adhere to DLA’s procurement standards, including specific preservation, wrapping, and containerization codes. The item is exempt from unique identification and shelf life requirements, and configuration changes require formal engineering change proposals. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero nonconformances unless otherwise stated, with attributes classified per defined verification levels. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. Shipment logistics comply with DLA procedural notes for transportation and freight, and the contract is managed under the DoD’s authorized unit of issue system.

Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

ADAPTER, TRANSPORTATATI

Solicitation # SPE4A5-26-T-313A

The contract pertains to the procurement of four adapters for transportation under solicitation SPE4A5-26-T-313A, a total small business set-aside for NAICS code 332912, with a unit price of $4.00 per unit totaling $16.00. Delivery is FOB origin with a strict quantity tolerance of plus or minus zero percent, and the required delivery date is 163 days from award, with an original deadline of June 19, 2027. Inspections and acceptance occur at origin, and all items must comply with MIL-STD-2073-1E packaging standards, including MIL-STD-129 marking with no special marking codes, and palletization per DLA packaging requirements. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced via R numbers, and sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The item is not subject to shelf life constraints and does not require Unique Item Identification per DFARS 252.211-7003(c)(1)(i). The adapter design is defined by multiple reference drawings and quality assurance provisions dated between 2004 and 2015. Transportation and shipping are directed to DLA Distribution Red River in Texarkana, Texas, with freight instructions governed by DLA Procurement Notes C19 and C20. All documentation, source approval, measuring equipment, and inspection protocols must align with specified DLA directives including RC001, RT001, and RQ009.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 15 hours ago

DEADLINE

PLATE, STRUCTURAL, AI

Solicitation # SPE4A5-26-T-313B

The contract specifies the procurement of a structural plate identified by NSN 1560016936152 and part number 356T0102-1, supplied in a quantity of one unit under solicitation SPE4A5-26-T-313B. The item is classified as a critical application component for Boeing and is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which incorporate R and I numbers as governing specifications. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and supply chain traceability documentation must be retained per DLA Directive Procurement Note C03. The plate must meet FAA bare item marking requirements and airworthiness approval standards, with verification procedures aligned to MIL-STD-1916 or ASQ H1331, including zero non-conformances in sampling unless otherwise stated. Packaging and marking adherence to MIL-STD-2073-1E and MIL-STD-129 is mandatory, with palletization following DLA Packaging Requirements, and parcel post shipping is explicitly prohibited. Delivery is FOB origin with a strict 20-day timeline, inspection and acceptance occurring at destination, and both units carry identical packaging and delivery conditions. The contract also defines specific freight and receiving addresses at Joint Base MDL, New Jersey, and requires shipment by the fastest traceable means with unique tracking identifiers. Unit price is set at $1.00, total price reflects nominal value, and no quantity variance is permitted. The item does not require Unique Identification per customer request, and all documentation and compliance obligations are tied to active DLA and DoD directives as of the solicitation and award dates.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

FAN, CENTRIFUGAL

Solicitation # SPE4A5-26-T-312Y

This contract pertains to the procurement of a centrifugal fan identified by NSN 4140-01-698-9590 and part number N149460-4, with a quantity of eight units to be delivered FOB origin within 317 days of contract award, no later than June 20, 2027. The requirement is strictly defined, with no variance allowed in quantity and inspection and acceptance taking place at the destination facility. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, materials, and unit container requirements, while prohibiting any mercury or mercury compounds in preservation, packaging, or marking. All items must adhere to DLA’s packaging standards and be palletized per RP001, with no special marking required beyond standard labeling. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, incorporating referenced standards such as MIL-STD-1916 or ASQ H1331 for sampling, where critical, major, and minor attributes are assigned verification levels of VII, IV, and II respectively, with acceptance criteria requiring zero non-conformances unless otherwise stated. Mercury and mercury-containing compounds are prohibited in all supply components except in limited functional applications like batteries, fluorescent lights, sensors, controls, weapon systems, or chemical reagents as specifically authorized by NAVSEA, and portable items containing mercury must include shockproof design and secondary containment in accordance with NAVSEA 5100-003D. The contract is issued under solicitation SPE4A5-26-T-312Y by the Department of Defense’s ASC Supplier Oper OEM Division, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and point of contact for inquiries is Chelesea Fleming.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Barcoding and Military Shipment MarkingThe contract requires the application of barcodes and shipment markings in full compliance with MIL-STD-129 and the Uniform Labeling System, ensuring accurate identification and tracking of all military shipments. This includes the correct labeling of National Stock Numbers, item identification codes, and handling codes to meet Department of Defense standards for logistics and inventory control. The work must be performed at the specified place of performance in Hunter Army Airfield, Georgia, with all labeling and marking procedures adhering strictly to federal military specifications to ensure seamless integration into the defense supply chain. This is a subcontract solicitation issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with a NAICS code of 561990 indicating it falls under Other Support Activities. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026. All parties must ensure compliance with labeling standards and timely delivery to meet operational readiness requirements. There is no set-aside designation, and the contract is open to any qualified subcontractor capable of executing the technical requirements outlined in the referenced military standards.

All Other Support Services

POSTED

DEADLINE

Hazardous Materials Labeling and ComplianceThis contract requires the preparation and application of hazard warning labels in strict compliance with OSHA 29 CFR 1910.1200 and MIL-STD-129 standards, ensuring accurate identification and communication of chemical hazards for military and federal applications. A critical requirement is the pre-award submission of label designs to the contracting officer for review and approval prior to production, emphasizing adherence to regulatory and procedural protocols. The work is scoped under a subcontract with a NAICS code of 541690, indicating professional, scientific, and technical services, and is tied to the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Performance is designated to occur at Hunter Army Airfield, Georgia, with a response deadline of August 5, 2026, and the solicitation was posted on July 28, 2026, suggesting a limited window for proposal submission.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE