This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 24, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Wireless Jack Weigh System

Closed

FA8525-25-R-0034Federal

Submission Closed07/17/2025, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333993

New

SLED

5600 Combo L’ Sealer and Tunnel Combination Machine SupplierThis subcontract agreement involves the supply of one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine intended for prime contractors working on State of Ohio Department of Administrative Services projects. The equipment package includes a machine with a 19 by 14 by 6 inch seal area, a precision temperature control tunnel, a 36F 3 ft Flighted Infeed Conveyor, and a Model 18-12SW Flexible Skate-wheel Conveyor. All provided machinery must exceed OSHA safety standards and be delivered as a fully functional unit accompanied by a spare parts kit. The procurement is managed by the Das105000 General Services Division Lzrs under NAICS code 333993. The solicitation was posted on October 16, 2026, with a response deadline set for November 2, 2026.

Das105000 General Services Division Lzrs

POSTED

DEADLINE

5600 Combo, Fully Automatic L’ Sealer and Tunnel Combination Machine

Solicitation # SRC0000042083

The State of Ohio Department of Administrative Services is soliciting quotes for one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine for use in Copy Center production. The equipment must feature a production speed of up to 30 packages per minute, a maximum seal area of 19 inches long by 14 inches wide by 6 inches high, and a variable speed drive from 0 to 95 FPM. Technical specifications include a chamber size of 18 inches wide by 7 inches high by 38 inches long and a precision temperature controller ranging from 0 to 400 degrees. The procurement also includes a 36F 3 ft flighted infeed conveyor, a Model 18-12SW 18 inch wide flexible skate-wheel conveyor, and a spare parts kit. Due to a 51 inch width entry restriction at the print shop, the machine must be delivered in separate pieces and assembled on-site. The awarded supplier must provide itemized pricing for installation and training. Safety is a critical requirement, as the machine must exceed OSHA safety standards with a fully enclosed seal area and safety interlocks on all doors, as well as built-in self-diagnostics on the control panel. Selection will be based on the lowest responsive and responsible quote. All bidders must be fully registered as suppliers with the State of Ohio through OhioBuys, OhioPays, and the Ohio Secretary of State.

Das105000 General Services Division Lzrs

POSTED

DEADLINE

MIL-SPEC Packaging and Hazardous Materials ShippingThis subcontract involves providing specialized military packaging and hazardous materials shipping services for prime contractors supporting DLA Troop Support contracts at Tinker AFB. The scope of work requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 standards for packaging and marking, with a specific focus on marking code 32 for items with a shelf life. To ensure safety and compliance, the contractor must possess HAZMAT shipping certification and utilize certified containers and labeling to facilitate rapid five-day delivery of completed kits to their destination. Managed by the Department of Defense under the DLA DIST OKC KO CP agency, the project falls under NAICS code 333993. The performance of these services will take place at Tinker AFB in Oklahoma. Interested parties should note the response deadline of October 21, 2026, to submit their proposals for this specialized logistics requirement.

POSTED

DEADLINE

Solicitation # 967-0928-27

The County of Solano, through the Sheriff's Office - Office of Emergency Services, is soliciting bids under RFQ 967-0928-27 for the procurement and delivery of one fully assembled, operational sandbagging machine. This equipment is intended to enhance emergency preparedness and operational resilience during flood and storm events by enabling the rapid production of up to 1,200 sandbags per hour with a four-person crew. The machine must feature a heavy-duty welded steel frame with a minimum 10-gauge steel hopper, forklift pockets, and a digital control panel. Key technical requirements include adjustable fill weights from 1 to 5,000 pounds, compatibility with various bag materials and fill substances such as sand, gravel, and soil, and the integration of dual hopper agitators, an industrial sewing system, and a compatible generator for use in locations without utility power. The contract is governed by the laws of the State of California and requires delivery F.O.B. destination to Fairfield, California, with a target delivery date of November 15, 2026. Award will be granted to the lowest responsive and responsible bidder. Proposers must submit their bids electronically via the OpenGov portal by November 2, 2026, including a vendor application, a signed signature page, and proof of non-debarment via SAM.gov. The successful vendor must provide a minimum two-year or one-million-cycle manufacturer's warranty and maintain comprehensive general liability and workers' compensation insurance. Additionally, vendors must comply with Cal/OSHA requirements regarding hazardous materials and provide Material Safety Data Sheets if applicable.

Sheriff's Office - Office of Emergency Services

POSTED

DEADLINE

Solicitation # 2027-RFQ-00168

The California Human Resources Department in Redwood City is soliciting quotes under solicitation number 2027-RFQ-00168 for the purchase, installation, setup, and ongoing maintenance of a high-volume folder/inserter machine. The equipment must be capable of folding, inserting, and sealing various standard mail pieces, including multi-page documents and return envelopes, to ensure secure and efficient government mail operations. Vendors are required to provide detailed equipment specifications, capacity, software licensing, and compatibility details with existing workflows. The selection process will prioritize the best overall value, weighing cost against reliability, operational efficiency, and service support. Interested parties must submit their responses by the deadline of November 10, 2026. Primary coordination for this project is handled by Financial Management Analyst Carling Luk and Mail Services Supervisor Victor Morales.

Human Resources Department

POSTED

DEADLINE

MIL-SPEC Packaging and LabelingThis subcontract, titled MIL-SPEC Packaging and Labeling, is a Service-Disabled Veteran-Owned Small Business set-aside for the DLA Weapons Support Maritime Supply Chain under the Department of Defense. The contractor is responsible for providing packaging materials and performing final packing for prime contractors, specifically delivering 32 units packed and palletized for FOB Origin shipment. All work must be performed in New Cumberland, Pennsylvania. The scope of work requires strict adherence to military and industry standards, including packaging units per ASTM D3951, palletizing per RP001, and marking and labeling all materials in accordance with MIL-STD-129. The contractor must utilize MIL-SPEC crates and cushioning to ensure compliance. The solicitation was posted on October 12, 2026, with a response deadline of October 23, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Horizontal Overwrap Machine SupplierThis subcontract opportunity is for the procurement of one Horizontal Overwrap Machine intended for food packaging applications at the Fresno Unified School District Nutrition Services facility in Fresno, California. The selected supplier is responsible for the manufacturing or sourcing of the equipment and must manage all logistics related to shipping and delivery to ensure the machine is delivered fully operational. The project is governed by federal funding provisions, requiring strict compliance from the contractor. Interested parties must submit their responses by October 28, 2026, in accordance with the solicitation posted on October 7, 2026.

Fresno Unified School District

POSTED

DEADLINE

Horizontal Overwrap Machine

Solicitation # 27-15

Fresno Unified School District is soliciting formal sealed bids under Bid No. 27-15 for the purchase of a Horizontal Overwrap Machine. This procurement involves federal funding and is subject to all applicable federal provisions. The contract will be awarded as a fixed-price agreement to the lowest responsive and responsible bidder, with the evaluation based on the total combined price of the base unit and any optional spare parts. Interested bidders must submit their proposals electronically via the Procureware online purchasing portal by 2:00 P.M. on Wednesday, October 28, 2026. Submissions via email, fax, or paper will not be accepted. The clarification deadline for questions is October 21, 2026, and inquiries should be directed to Edward VanPatten. The district reserves the right to reject any or all bids, and submitted bids cannot be withdrawn for ninety days following the due date.

Fresno Unified School District

POSTED

DEADLINE

Medical Device Logistics and DeliveryThis subcontract for Medical Device Logistics and Delivery involves the secure and timely transport of sterile medical implants for prime contractors supporting SUNY Upstate Medical University projects. The service requires the use of climate-controlled vehicles and sterile handling equipment to execute cold-chain or sterile-environment transport, ensuring just-in-time delivery to the surgical center in Syracuse, New York. To qualify for this engagement, the provider must maintain HIPAA compliance and hold all necessary DOT medical transport certifications. The contract falls under NAICS code 333993 and is managed through the State University of New York.

State University of New York (SUNY)

POSTED

DEADLINE

Aseptic filling and closing system (filler)

Solicitation # 2026010387

The University of British Columbia, under the Province of British Columbia, has issued a solicitation for an aseptic filling and closing system. This procurement opportunity, identified by solicitation number 2026010387, is focused on acquiring a filler system to be utilized within the province of British Columbia. The solicitation was officially posted on September 22, 2026, and interested parties must submit their responses by the deadline of October 21, 2026. Further details and submission guidelines can be accessed through the BC Bid portal.

University of British Columbia

POSTED

DEADLINE

Oilfield Equipment SupplyThis subcontract for Oilfield Equipment Supply involves the provision of specialized materials for prime contractors operating on CalGEM regulated projects at the Newlove 251 site. The scope of work includes the delivery of certified oilfield hardware, specifically production tubing, packers, valves, seals, and wellhead components, to the designated project location. The contract is associated with the California Department of Conservation and falls under NAICS code 333999. It was posted on August 12, 2026, and is managed through the California Environmental Quality agency network.

California Conservation, Department of

POSTED

DEADLINE

UID/RFID Labeling and Marking ServicesThe contract awards services for UID and RFID labeling and marking of medical and logistics supplies to ensure full compliance with MIL-STD-130 and MIL-STD-129 standards. These markings are critical for maintaining accurate identification, tracking, and inventory management of defense-related items across the supply chain. The work involves applying standardized unique identifiers and radio frequency identification tags to ensure traceability, interoperability, and regulatory adherence throughout the Department of Defense logistics network. The contract is structured as a subcontract under the Defense Logistics Agency, with the NAICS code 333993 indicating specialized machinery manufacturing support services relevant to marking and labeling operations. Although the solicitation number and specific location details are not provided, performance is expected to support DLA operations wherever military medical and logistics supplies are managed. The posting date of August 3, 2026, signals a future award timeline, suggesting the contract is being prepared for competitive selection or transition. Full compliance with federal military standards remains the central requirement, with all labeling and marking activities subject to rigorous quality control and documentation protocols.

Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A

AI Contract Overview

The contract involves the procurement and installation of a Wireless Jack Weigh System designed specifically for the C-5M Super Galaxy aircraft, with the primary goal of enabling permanent repairs to the wing forward beam lower spar caps across the entire fleet. The system must support 18-point jacking procedures by providing accurate load measurements without the need for a Jack-Weigh system currently unavailable on the C-5 PDM. The contractor is required to deliver a comprehensive cost breakdown and a separately priced high-fidelity proposal to AFLCMC/WLS, with the contract awarded as a sole source to Intercomp, CAGE: SW667. The system must meet stringent technical specifications, including wireless communication capabilities, interchangeable load cells, and robust hardware features such as a hardened CPU capable of managing multiple load inputs and wireless communication over significant distances, both indoors and line of sight. The technical requirements emphasize reliability, flexibility, and compatibility with military standards, including the ability to store calibration data, assign and reassign load cell IDs without recalibration, and operate seamlessly with existing and future components. The system must be capable of displaying real-time weight data immediately upon power-up, operate from various power sources, and communicate wirelessly within specified ranges. The solicitation, posted by the Department of the Air Force at Robins AFB, GA, with a response deadline of July 17, 2025, underscores the importance of meeting these critical performance and configuration standards to support aircraft structural repairs efficiently and accurately across the fleet.

General Info

Sole-source contract for wireless Jack Weigh System to repair C-5M wing spars fleet-wide.

Agency

Department Of Defense → FA8525 Aflcmc Wlska

NAICS

333993 - Packaging Machinery Manufacturing

Place of Performance

MN, 55340, USA

Set-Aside

NONE

Documents

AFMC Form 158 Packaging Requirements

specifications

High

DD Form 1653 - Transportation Data for Solicitations

3 pages · specifications

High

FA8525-25-P-000X C-5 Wireless Jack Weigh CDRLs

cdrl

High

FA8525-25-Q-0002 Solicitation for Commercial Products and Services

26 pages · rfq

High

SOW PR FD2060-25-32770 Wireless Jack Weigh System

5 pages · sow

High

Form 807 Quality

other

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedJun 24

Combined Synopsis

Notice updatedJun 24

The notice description changed.

Response DeadlineJul 17

Deadline has passed

Submission Closed

07/17/2025, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → FA8525 Aflcmc Wlska

Contacts2 people available

OfficeROBINS AFB, GA, 31098-1670, USA

Organization / AgencyDepartment Of Defense → FA8525 Aflcmc Wlska

Office AddressROBINS AFB, GA, 31098-1670, USA

Contacts

Alisha Foster

contact@example.gov

Benjamin Morris

contact@example.gov

Full Description

The Contractor shall perform all tasks and duties as specified in the Statement of Work (SOW) for C-5M Super Galaxy. The purpose of the PWI Program is to permanently repair the wing forward beam lower spar caps at all PWI locations. Prior to conducting the structural repairs, 18-point jacking is required to zero-load the wing structures on one C-5 aircraft. The C-5 PDM does not currently have an operational Jack-Weigh system to complete the required tasks. This repair will be required for the entire C-5M fleet, which requires multiple systems and equipment. The contractor shall provide a full cost breakdown and separately priced high-fidelity quote and proposal to AFLCMC/WLS. This system must meet specific critical performance requirements and configuration for military aircraft. Must have wireless capability and components interchangeable between Intercomp kits and components. The following specific technical functions must be met: a. Ability to store calibration at load cell with analog to digital conversion at the load cell. b. Ability to assign and reassign ID and channel without the need to recalibrate. c. Interchangeable load cells with radios, modules, and CPUs of same brand for cross functionality of components between sets to include currently owned load cells. d. Ability to store load cell output in non-volatile memory whenever cells are zeroed. e. Ability to display current weight when powering on when load cells are under load. f. Hardened CPU that can display weight of up to 18 load cells. CPU must have the ability to communicate wirelessly, hardwired, and operate from AC and internal DC sources. g. Radio modules must communicate with CPU from a range of 200 ft indoors and 300 ft line of sight powered from alkaline and rechargeable batteries.