Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WIRING HARNESS, BRANCHED

Active
SPE4A6-26-R-XB72Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 25 units of a branched wiring harness identified by NSN 5995-01-204-2606, with a delivery schedule of 434 days after contract award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Defense Logistics Agency’s ASC Commodities Division, with a response deadline of August 8, 2026. Compliance with stringent technical and quality standards is mandatory, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and application of MIL-STD-1916 or ASQ H1331 for sampling unless otherwise directed. Critical, major, and minor attributes must be verified with specified levels or AQLs, and unspecified attributes are treated as major with zero non-conformance acceptance criteria. The item is subject to export control regulations under ITAR or EAR, restricting technical data disclosure to foreign persons without prior government authorization, and only contractors with approved JCP certification, completed DLA training, and explicit authorization may access such data. Additional requirements include DLA packaging standards, removal of government identification from rejected items, physical marking of bare items, inspection and acceptance at the manufacturer’s origin, and cybersecurity maturity certification at CMMC Level 2 for third-party assessors. All data and performance are governed under the terms of the solicitation SPE4A6-26-R-XB72.

General Info

Procure 25 wiring harnesses, delivery in 434 days, small business set-aside, CMMC Level 2, ITAR/EAR controlled, DLA standards apply.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(1)

SPE4A626RXB72.PDF

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Collin Quirk
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRING HARNESS<(>,<)> BRANCHED
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. ---RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE4A6-26-R-XB72
SECTION B
SUPPLY/SERVICE: 5995-01-204-2606 CONT'D
export-controlled data. NSN/Part Number: 5995-01-204-2606 Quantity: 25 EA Delivery: 434 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
ARRESTER, LIGHTNINGThe contract is for the procurement of five lightning arresters with NSN 5920-01-714-7685 under solicitation SPE7M5-26-T-321D, issued by the Department of Defense’s Active Devices Division. Delivery is required within 168 days after receipt of order, with a firm delivery date of January 13, 2027, to the DLA Distribution facility at New Cumberland, Pennsylvania, under FOB Origin terms. The acquisition follows simplified procedures, potentially using a Lowest Price Technically Acceptable (LPTA) award methodology, though no formal evaluation factors, weights, or risk ratings are specified. Pricing is listed as $0.00, indicating incomplete or placeholder data, and no contract value can be determined. Compliance with DLA’s packaging requirements (RP001), MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking—including mandatory barcoding and hazard labeling per 29 CFR 1910.1200—is strictly required. All items must be preserved using the CLNG/DRY method without supplemental materials. Payment and invoicing are required through the Wide Area WorkFlow system, with electronic submission of receiving reports and invoices mandatory. The contract incorporates numerous Federal Acquisition Regulation clauses addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials, cybersecurity protections, subcontracting, inspection at destination, default, whistleblower rights, and prohibitions on certain defense telecommunications equipment and hazardous substances like hexavalent chromium. Offerors must provide a Unique Entity Identifier, CAGE Code, and represent their size and socioeconomic status, including disclosures for joint ventures. Specific representations regarding covered defense equipment and data safeguarding are triggered by 252.204-7016 and 252.204-7012, requiring compliance with NIST SP 800-171. The Technical and Quality Requirements are governed by the DLA Master List, with revisions effective on the solicitation issue date controlling simplified acquisitions. Proposals must be submitted exclusively via the DIBBS portal by July 29, 2026, with no physical submissions permitted.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
ARRESTER, LIGHTNINGThe contract solicitation SPE7M5-26-T-319E is for the procurement of seven lightning arresters identified by NSN 5920-01-714-7686 under a simplified acquisition framework managed by the Defense Logistics Agency’s Active Devices Division. Delivery is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania, with a 168-day timeline from the date of order and FOB Origin terms, meaning the contractor assumes all shipping costs and risks until the product reaches the designated delivery point. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with preservation requiring cleaning and drying per method code 10 and no special preservation materials. Palletization complies with DLA’s RP001 packaging requirements. The solicitation, posted July 24, 2026, with a response deadline of July 29, 2026, does not include pricing data, and the contract value remains unlisted. Compliance with extensive regulatory and security obligations is mandatory, including adherence to NIST SP 800-171 for cybersecurity protection of controlled unclassified information, mandatory use of U.S.-flag vessels for ocean shipments unless a waived exception is obtained 45 days in advance, and strict labeling and documentation requirements for hazardous materials under OSHA’s Hazard Communication Standard. The contract incorporates multiple DFARS and FAR clauses addressing substitution of parts, inspection at destination, default, accelerated payments to small business subcontractors, prohibition of hexavalent chromium, avoidance of communist Chinese military company supplies, and electronic invoicing through WAWF. Offerors must provide UEIs and CAGE codes, disclose socioeconomic status, and complete representations regarding covered defense telecommunications equipment. Deviations are acknowledged for several clauses, including NIST controls, subcontracting for commercial items, and changes, indicating tailored compliance expectations. No evaluation factors or award methodology are explicitly defined, but the use of a simplified acquisition and absence of trade-off provisions suggest a likely LPTA approach. All submissions must be electronic via the DIBBS portal, with no physical submissions permitted.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
CONTACT, ELECTRICALThis contract pertains to the procurement of electrical contact components identified by NSN 5999-01-075-7359 and part number 1001123, with a total quantity of 650 units split across two line items: 295 units at $295.00 each and 355 units at $355.00 each, totaling $193,625. Delivery is required within 164 days from the contract award, with FOB origin terms applying. All items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the supplied hardware except for specific exempted applications such as batteries, fluorescent lights, and certain instruments as defined by NAVSEA, with additional safety requirements for portable devices containing mercury. Packaging and shipping must adhere to IP025 regulations for hazardous materials, and all shipments must be directed to two designated DLA distribution centers in New Cumberland, PA, and Barstow, CA. Inspection and acceptance occur at the destination, with zero variance allowed in quantities. The solicitation number is SPE7M5-26-T-326J, issued under full and open competition, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, with compliance tied to the version in effect on the solicitation or award date depending on acquisition type. The unit of issue is each (EA), aligning with DoD standards, and all shipments must meet the required need ship date of January 5, 2027, with an original required delivery date of December 9, 2026.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThe contract is a Request for Quotations issued by the Defense Logistics Agency’s Aviation Commodity Division for three units of a cable assembly identified by NSN 5995-01-694-7835, with delivery required within 295 days after receipt of order, targeting a ship date of May 16, 2027. The item is designated as a critical application component and must conform to drawing revision C dated December 30, 2012, with part number UA-2476 and technical documentation revision TDP Rev A Gen 1. The solicitation incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with specific provisions for physical identification, packaging, and marking in accordance with MIL-STD-2073-1E and MIL-STD-129, including mandatory use of QUP 001, packaging method 10, and unit container E5. Packaging and marking must also avoid mercury or mercury-containing compounds except in approved exceptions such as batteries, fluorescent lights, and certain NAVSEA-specified instruments, which must include a second containment boundary if portable. Inspection and acceptance occur at origin with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise specified; quality systems must meet SAE AS9003 or ISO 9001 tailored to AS9003. The contract mandates compliance with export control regulations under ITAR or EAR, restricting access to technical data to offerors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and DLA approval. Participation requires submission of a Safety Data Sheet and representation in SAM confirming small business status and compliance with the Buy American Act and Berry Amendment. Electronic invoicing through WAWF is mandatory, with fast pay not applicable. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors and full compliance with FAR clauses 252.204-7012 and 252.240-7997 for safeguarding covered defense information and NIST SP 800-171 adherence. Offers must be submitted via DIBBS by July 24, 2026, and the contract is not a small business set-aside, though HUBZone price evaluation preferences are available
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
Federal
Input and Output Power Cabling SupplyThe contract is for the supply of WH-15 input and WOA-80M AC output cables to be integrated with the UFC-180H frequency converter system. It is a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, and the North American Industry Classification System code is 335931, which corresponds to other electrical equipment and component manufacturing. The opportunity was posted on July 24, 2026, with a response deadline of August 17, 2026, at 6:00 PM. Performance is required at Cape May Ch, New Jersey, with a zip code of 08641. The contract falls under the Department of Defense and is managed by the FA4484 87 Cons Pk office. All submissions must meet technical specifications for compatibility with the UFC-180H system and adhere to the set-aside requirements for small business participation.
FA4484 87 Cons Pk

POSTED

1 day ago

DEADLINE

in 23 days
View Details
NAICS: 335931
New
Federal
59--CONNECTOR,RECEPTACLThe U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source contract to The Boeing Company for two units of a connector, receptacle part identified by NSN 0Q-5935-017222756-SX and part number D0090557-201, with delivery term FOB origin. This part is exclusively manufactured by the original equipment manufacturer, and the government holds no data or intellectual property rights that would allow procurement from alternative sources, making The Boeing Company the only viable supplier under 10 U.S.C. 2304(c)(1) and FAR 6.302. The acquisition is categorized under NAICS 335931 and PSC 500, with a contract duration of one year, subject to UID requirements and Buy American provisions. The procurement will follow FAR Part 15 procedures and will not utilize commercial item acquisition policies under FAR Part 12. All interested parties may submit capability statements within 45 days of the notice, but no competition is anticipated, and the government will not delay the process to consider new source approvals. The request for proposal is scheduled for release on July 24, 2026, with proposals due by August 24, 2026, and an anticipated award on September 24, 2026. The solicitation will be posted electronically via NECO, with no hard copies or phone inquiries accepted. All submissions must be directed via email to Deja Thompson-Mitchell.
Navsup Weapon Systems Support

POSTED

1 day ago

DEADLINE

in 29 days
View Details
NAICS: 335931
New
Federal
59--CONNECTOR,ELECTRICThis contract governs the procurement of a specialized electrical connector assembly for critical shipboard use, designated as SPECIAL EMPHASIS material due to the high risk of failure that could result in loss of life, ship systems, or the vessel itself. The contractor must manufacture the assembly in strict compliance with Naval Sea Systems Command Drawing 7349938, MIL-DTL-24231, and other referenced specifications, with stringent requirements for material traceability, chemical and mechanical certification, and non-destructive testing. All components must be traceable from raw material through final assembly via unique heat-lot markings, and certifications must be 100% verified, positive, and unqualified, with no disclaimers permitted. Certain parts, including hull penetrators and receptacle bodies made from QQ-N-286 alloy, require specific heat treatments, chemical analysis, and destructive testing to validate compliance, with testing restricted to approved laboratories for slow strain rate tensile tests. The contract mandates comprehensive First Article Testing, both contractor-performed and government-performed, with the contractor required to submit one cable specimen for destructive testing and one complete assembly to Portsmouth Naval Shipyard for government evaluation. Quality assurance is rigorously enforced under ISO-9001, with full Government inspection at source and mandatory submission of documented quality procedures, welding qualifications, and test reports via the ECDS system. All welds, brazing, and material modifications require prior approval, and repairs on QQ-N-286 material are strictly prohibited. The contractor must maintain full configuration control, submit Engineering Change Proposals for any modifications, and comply with Buy American and Defense Priorities and Allocations System (DPAS) requirements, as this is a DO-rated order for national defense use. Delivery of all material must be completed within 365 days of contract award, with certification data submitted 20 days prior to each delivery, and the entire product line is subject to zero-defect acceptance criteria during final inspection.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
IEM/MMM TACTICL EHFThis contract pertains to the procurement of specialized hull-penetrating assemblies for critical naval shipboard systems, where failure could result in catastrophic loss of life, vessel, or mission-critical capabilities. All materials, particularly those made from QQ-N-286 and SAE AMS 5666, must meet exacting chemical and mechanical specifications, with mandatory traceability from raw material through final assembly via unique heat-lot markings. Every component requires comprehensive certification including tensile, hardness, hydrostatic pressure, electrical, and ultrasonic testing, with results documented in Objective Quality Evidence (OQE) reports that must be electronically signed and traceable to individual items. The delivery schedule mandates submission of certification data at least 20 days prior to shipment, with final delivery due within 365 days of contract initiation. All materials are designated as SPECIAL EMPHASIS Level I, requiring 100% inspection of traceability, certifications, and test records, with zero-defect acceptance criteria for lot inspection. The contractor must maintain ISO-9001 or MIL-I-45208 quality systems, with documented procedures for welding, brazing, and material handling, and must submit all weld procedures and qualifications for Navy approval prior to production. Repair welding is prohibited on QQ-N-286, and thread lubricants containing molybdenum disulfide are strictly forbidden, with A-A-59004 anti-galling compound required instead. All certification documentation must be submitted via the Wide Area Work Flow (WAWF) system to Portsmouth Naval Shipyard using DODAAC N50286, with notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, and no shipment is permitted without formal acceptance. The contract is issued under Emergency Acquisition Flexibilities and is rated DO under the Defense Priorities and Allocations System, requiring strict adherence to Buy American and small business subcontracting requirements. Configuration control is tightly enforced, with any deviation or waiver requiring formal review and approval by the Contracting Officer, and all engineering changes must be submitted as Class I or II ECPs with full-life cycle impact analysis. Government source inspection is required at all production sites, including subcontractors, and all subcontracted work must carry forward the full quality and traceability requirements. Electronic signatures are accepted in place of handwritten ones, provided they are secured, auditable, and controlled per strict standards, and all foreign certifications must include US unit conversions signed by an authorized representative.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
LA IEM TACTICAL EHFThis contract pertains to the procurement of a Hull Penetrating Assembly designated as SPECIAL EMPHASIS material (Level I, Quality Assured) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel itself. The material must strictly comply with LaBarge Inc. drawing 7-21740 and associated specifications, with detailed requirements for chemical and mechanical properties, particularly for components made from QQ-N-286 material and SAE AMS 5666 bar stock. Certification of all critical materials, welds, and tests is mandatory, including tensile, hardness, hydrostatic, electrical, and ultrasonic inspections, with results traceable to unique heat lot numbers and permanently marked on each component. All test and certification data must be submitted electronically via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with inspection and acceptance authority vested in N39040 and shipping directed to N50286. The contract mandates 100% inspection of traceability, certification documents, and nondestructive test results, and enforces zero defect tolerance during final lot acceptance. A comprehensive quality assurance regime is established, requiring the contractor to maintain an ISO-9001 or MIL-I-45208 compliant quality system, with calibration standards aligned to ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025. Government Quality Assurance representatives retain full rights to inspect at source, including subcontractor facilities, and all sub-tier suppliers must adhere to the same traceability, certification, and documentation standards. Welding and brazing procedures require formal approval prior to execution, and repair welding on QQ-N-286 is prohibited; all weld filler metals must be certified and traceable. Electronic signatures are accepted on certifications provided they are uniquely tied to authorized individuals and documents cannot be altered post-signature. The contractor must ensure material traceability from raw stock through all manufacturing and subcontracting steps, with strict segregation, marking, and documentation controls. Mercury and molybdenum disulfide are prohibited, and anti-galling compound A-A-59004 must be used for threads. The contract is issued under Emergency Acquisition Flexibilities, holds a “DO” priority rating under the Defense Priorities and Allocations System, and is subject toBuy American and Small Business Subcontracting Plan requirements, with all deviations or waivers requiring
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 335931
New
Federal
POWER SUPPLYThis contract pertains to the repair of a POWER SUPPLY under a fixed-price arrangement, with all work required to meet strict technical and quality standards defined by military specifications. The contractor must perform teardown and evaluation of received carcasses within 90 days and submit a firm-fixed price quote that includes all associated costs such as handling damaged or incomplete units, missing hardware, repair labor, and CAV reporting. The repair must adhere to approved contractor procedures, drawings, and technical orders tied to the specified CAGE code 0KPC5 and reference number CCHA41186-1. Items must be marked in accordance with MIL-STD-130 Rev N and packaged per MIL-STD-2073. Any design, material, or part number changes require prior written approval from the contracting officer and must be classified under one of six defined code categories. The award is subject to Defense Priorities and Allocations System (DPAS) certification and is issued under Emergency Acquisition Flexibilities. The contract mandates full compliance with Buy American provisions, cybersecurity maturity model requirements, and small business set-aside conditions, with the offeror required to provide a small business subcontracting plan. Electronic submission and acceptance of proposals are binding upon receipt, and non-original equipment manufacturers must submit authorization letters from the OEM. All inspection records must be maintained for 365 days post-delivery. The point of contact for inquiries is James E. Lewis, reachable via email and phone, with responses due by August 10, 2026. The requirement is administered by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, under solicitation number N0010426QND66, and all contractual documents are deemed officially issued upon electronic transmission. The repair price must reflect estimated costs for the entire repair effort, including new part cost for evaluation, and any deviations from solicitation requirements must be explicitly stated; otherwise, the award will strictly follow the stated terms.
Navsup Weapon Systems Support Mech

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 335931
New
SLED
Terminal Lugs Supply for Electrical Infrastructure
Nashville Electric Service

POSTED

1 day ago

DEADLINE

in 4 days
View Details
NAICS: 335931
New
International
F7049-250240-B - CCGS John P. Tully - Uninterruptable Power SupplyThe Canadian Coast Guard is seeking a replacement Uninterruptible Power Supply system for the CCGS John P. Tully, replacing equipment that is approaching end of life, with the new system to be installed during the vessel’s next refit. The solicitation, numbered WS5592460451, supersedes the prior solicitation Doc5697702923 and has a closing date of July 27, 2026, at 19:00 PDT. Offerors must deliver the UPS system no later than January 31, 2027, though earlier delivery is preferred, and the contract includes a one-year warranty period extending through January 31, 2028. This procurement is classified under NAICS code 335931 and is administered by the Department of Public Works and Government Services on behalf of the Government of Canada. The place of performance is in British Columbia, and inquiries should be directed to Thomas Leboeuf, the primary contracting authority, via the provided email. Debriefings will be available upon request to those who submitted offers under the prior solicitation.
Department of Public Works and Government Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
SCREW, MACHINEThe contract involves the procurement of a single machine screw identified by NSN 5305-01-723-0482 under solicitation SPE4A6-26-Q-1211, with a response deadline of July 31, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger procurements, unless an amendment specifies a later revision. The item is subject to export control under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure to foreign persons, including foreign nationals within the United States, and DFARS 252.225-7048 applies. Access to the controlled technical data is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and approval from the DLA controlling authority. Cybersecurity requirements mandate a CMMC Level 2 self-assessment and certification by a C3PAO. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Items must be physically marked according to specifications, and covered defense information is subject to additional handling protocols. The solicitation is managed by the Department of Defense’s ASC Commodities Division, with Vincent Price as the point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract solicits machine screws defined by NSN 5305-00-078-0184, with a total quantity of 64 pack units, each containing 50 screws, as of the effective date of February 1, 2023. The item must conform to the current revision of the applicable military or consensus non-government standards, and hardware manufactured to prior revisions that were current at the time of production remains acceptable, but all new production from the solicitation date forward must adhere strictly to the latest standard. Packaging must comply with DLA packaging requirements, and physical identification or bare item marking is required per RQ017. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major, and acceptance must be zero non-conformances unless otherwise stated. Thread inspection for Class 3A and 3B threads must comply with System 22 of FED-STD-H28/20, excluding self-locking nuts and threads below specified diameters. The procurement is fully competitive under a military or federal specification, and the solicitation is issued by the ASC Commodities Division under contract number SPE4A6-26-Q-1209 with a response deadline of July 31, 2026. Point of contact is Vincent Price, reachable via email and phone provided.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335929
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to the procurement of 10 units of a special-purpose electrical cable assembly identified by NSN 5995-01-478-5081, with a firm fixed price and no variance allowed in quantity. Delivery is required within 145 days after award, with shipment FOB origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which take precedence over all other specifications including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements for Procurement, with palletization and labeling conforming to specified guidelines. Cybersecurity requirements include a CMMC Level 2 self-assessment, and the contract incorporates provisions for handling Covered Defense Information. All supplies must be marked with physical identification per RQ017, and government identification must be removed from non-accepted items per RQ011. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are verified at designated levels. The contract is a total small business set-aside, issued under solicitation SPE4A6-26-R-XB53, with multiple approved suppliers listed, and all documentation must meet Source Approval Request requirements under RC001.
Other Communication and Energy Wire Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLATThe contract specifies the procurement of 29 flat washers identified by NSN 5310-00-022-3384 and part number G440050-20, manufactured in accordance with drawing number 24930 G440050 revision AA dated March 28, 1995. The item is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or a comparable zero-based plan; unspecified attributes are treated as major with verification levels and AQLs assigned accordingly. Mercury or mercury compounds are strictly prohibited in the hardware, packaging, preservation, and marking unless explicitly exempted for functional applications such as batteries or instrumentation, and any such exempted items must meet Navy specifications including double containment and shock-proof design. Packaging must adhere to MIL-STD-2073-1E with preservation method 10, unit container BD, intermediate container E5, and marking compliant with MIL-STD-129 using special marking code 00-00; palletization follows DLA packaging requirements. The contract is firm fixed price with no variance in quantity and delivery is due by November 26, 2026, with FOB origin and inspection and acceptance occurring at destination. The shipping and delivery address is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, and transportation details are governed by DLAD procedural notes C19 and C20. The solicitation number is SPE4A6-26-Q-1210, issued by the Department of Defense’s ASC Commodities Division, with Vincent Price as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication Compliance (Hazardous Materials Documentation)The contract requires the preparation and submission of Material Safety Data Sheets and hazard labels for all hazardous materials used in production or plating operations, ensuring full compliance with OSHA’s Hazard Communication Standard under 29 CFR 1910.1200. This subcontract is issued by the ASC Commodities Division under the Department of Defense and targets service providers capable of accurately documenting chemical hazards in accordance with federal safety regulations. The work must be completed and submitted by the response deadline of July 31, 2026, following the solicitation posted on July 24, 2026. The North American Industry Classification System code 541690 indicates this is a professional, scientific, and technical service related to other scientific and technical consulting services, suggesting the need for specialized expertise in chemical safety documentation. Performance location details are unspecified, and no set-aside status or point of contact information is provided, indicating a broad eligibility for qualified subcontractors to respond.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and MarkingThe contract requires complete packaging, labeling, and barcoding of delivered screws in strict compliance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet military grade requirements for durability, identification, and traceability. This includes the application of 2D Data Matrix barcodes and accurate NSN marking on each unit, enabling seamless logistics and inventory tracking across defense supply chains. The work must be executed with precision to meet federal specifications for military hardware handling and documentation. This is a subcontract opportunity posted by the ASC COMMODITIES DIVISION under the Department of Defense, with a response deadline of July 31, 2026. The NAICS code 493190 indicates the scope falls under Other Support Activities for Transportation, emphasizing the logistical and packaging nature of the services. The place of performance and point of contact details are not specified, but interested parties must adhere to all technical and procedural requirements outlined in the referenced military standards to qualify for award. The solicitation is accessible through the DIBBS system at the provided URL.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing – Hexagon Cap ScrewsThe contract calls for the manufacture of eight units of hexagon cap screws designated as NSN 5305-01-698-5982, with specifications of M12x70-10.9-ZN5/AN, requiring full compliance with ISO 4017 Revision 6 and applicable military standards. These fasteners must meet exacting quality and performance criteria to ensure reliability in defense applications, with the material finish and mechanical properties defined by the 10.9 grade strength and zinc coating. The work is being procured as a subcontract under the Department of Defense’s ASC Commodities Division, with the NAICS code 332722 indicating classification within screw, bolt, and fastener manufacturing. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, and all production and delivery must align with the military’s strict supply chain protocols. The place of performance and point of contact details are not provided, but the contract can be accessed through the DIBBS portal for further procedural guidance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423830
New
DIBBS
Counterfeit Electronic Parts Prevention ComplianceThis contract requires strict adherence to counterfeit electronic parts prevention protocols under FAR 52.246-7007, mandating comprehensive supply chain traceability to ensure no counterfeit components are introduced into associated systems. All subcontractors must implement and maintain verified processes to authenticate parts, document origin and chain of custody, and comply with Defense Department standards for procurement integrity throughout the lifecycle of delivered items. The requirement applies to all tiers of the supply chain and necessitates documented evidence of compliance upon request. The solicitation, issued by the ASC Commodities Division of the Department of Defense under NAICS code 423830, is classified as a subcontract with a response deadline of July 31, 2026. While no specific set-aside provisions or point of contact are provided, the place of performance and organizational details remain undefined in the posted data. All participants must access the official DIBBS portal via the provided link to review full terms and submit responses in alignment with the mandatory compliance framework established by the regulation.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 541380
New
DIBBS
Quality Inspection & Acceptance SamplingThis contract requires the performance of quality inspections using MIL-STD-1916 sampling procedures to ensure fasteners meet specified dimensional, material, and finish requirements. The work involves rigorous verification against established military standards to guarantee compliance and consistency in product quality. The inspection process is critical for maintaining the integrity of components used in defense-related applications, with a focus on statistical sampling to determine acceptability without full lot testing. The contract is classified as a subcontract under NAICS code 541380 and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026. The place of performance and point of contact details are not specified, but the action is accessible through the DIBBS system via the provided URL. All respondents must be prepared to execute the inspection protocol in full alignment with MIL-STD-1916 and deliver documentation demonstrating adherence to the technical specifications outlined for fastener acceptance.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 488510
New
DIBBS
International Freight & Logistics to JordanThe contract requires the arrangement of FOB Origin international freight and logistics services to deliver goods to Prince Hassan Air Base in Jordan, with full responsibility for export documentation, customs clearance, and compliance with Department of Defense delivery requirements. The scope encompasses end-to-end logistics coordination from the point of origin through final delivery, ensuring all regulatory and military standards are met for transportation into a sensitive DOD facility. All phases of the shipment must adhere to U.S. export laws and joint DOD protocols for international military logistics. The solicitation is classified as a subcontract under NAICS code 488510 for other support activities related to air transportation, with a response deadline of July 31, 2026, and a posting date of July 24, 2026. The procuring entity is the ASC Commodities Division under the Department of Defense, and no set-aside provisions are indicated. Although specific contact or performance location details are not provided, full compliance with DOD delivery protocols, including security, tracking, and documentation, is mandatory. Bidders must demonstrate capability in handling military logistics to the Middle East with proven experience in customs clearance and international FOB origin shipments.
Freight Transportation Arrangement

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Hazardous Materials Packaging & Labeling ComplianceThe contract requires compliant labeling and packaging of fasteners coated with hazardous materials, ensuring adherence to OSHA’s Hazard Communication Standard, the Globally Harmonized System of Classification and Labeling of Chemicals, and MIL-STD-129 military packaging standards. All deliverables must meet strict regulatory requirements for hazard identification, warning statements, pictograms, signal words, and container labeling, with packaging engineered to protect contents during transport and storage while maintaining full visibility and legibility of required markings. The work falls under NAICS code 561910 and is issued as a subcontract by the ASC Commodities Division of the Department of Defense, with responses due by July 31, 2026. Performance location details are not specified, but full compliance with federal and military standards is mandatory for acceptance.
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332722
New
DIBBS
Precision Fastener Manufacturing & SupplyThe contract calls for the manufacture and supply of a hex cap screw identified by NSN 5305-01-698-5982, requiring strict adherence to military specifications covering material composition, thread profile, head dimensions, and surface finish. The product must meet exacting standards for performance and durability in defense-related applications, ensuring compatibility and reliability in critical military systems. The subcontract is issued by the ASC Commodities Division under the Department of Defense, with a posted date of July 24, 2026, and a response deadline of July 31, 2026. The North American Industry Classification System code 332722 indicates the work falls within the manufacturing of screw, nut, and bolt products, and the place of performance is not specified, allowing flexibility for qualified suppliers to propose their facilities while maintaining compliance with all technical and quality requirements.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details