Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRING HARNESS

Active
SPE4A5-26-T-330WFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a wiring harness designated by part number 901-175-506-109 and NSN 6150-01-460-6236, with a quantity of five units to be delivered within 170 days from the contract date. The item is classified as a critical application component under The Boeing Company and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances required unless otherwise stipulated. Quality Assurance is governed by ISO 9001:2015, and configuration changes require formal engineering change proposals or variance requests. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and all documentation must meet Source Approval Request (SAR) and packaging criteria outlined in DLA guidelines. The wiring harness must be packaged in compliance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking code applied. Palletization conforms to DLA Packaging Requirements, and delivery is FOB origin to the specified destination at Tracy, California, with both inspection and acceptance occurring at the delivery point. The unit of issue is each, priced at $5.00 per unit for a total of $25.00, with no variance permitted in quantity. Item Unique Identification is waived per Service customer request, and all materials must be free of Government identification if rejected. Transportation directives and freight details are governed by DLAD Proc Notes C19 and C20. The contract solicitation was issued on August 5, 2026, with responses due by August 13, 2026, under NAICS code 335311, managed by the Department of Defense’s ASC Supplier Oper OEM Division, with Takiya Dickson as the primary point of contact.

General Info

Five wiring harnesses delivered FOB origin to Tracy, CA, compliant with MIL-STD, ISO 9001, CMMC Level 2, at $5.00 each.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

335311 - Power, Distribution, and Specialty Transformer ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-330W.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Takiya Dickson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRING HARNESS
WIRING HARNESS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 77272 P/N 901-175-506-109
SPE4A5-26-T-330W
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017739597 0001 EA 5.000
NSN/MATERIAL:6150014606236
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE4A5-26-T-330W
SECTION B
PR: 7017739597 PRLI: 0001 CONT’D
Need Ship Date:01/31/2027 Original Required Delivery Date:07/03/2027
SPE4A5-26-T-330W NSN/Part Number: 6150-01-460-6236 Quantity: 5 EA Purchase Request: 7017739597QTY: 5 Delivery: 170 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335311
New
DIBBS
CONTROL, ELECTRONIC
Solicitation # SPE8E8-26-T-5032
This contract pertains to the procurement of electronic control units under solicitation SPE8E8-26-T-5032, with a total quantity of nine units identified by NSN 6350-01-623-1250 and part numbers CI-CYP-20006 and S100XB2(24VDC)XA6XBRUTE. The items must be furnished FOB origin with no quantity variance allowed, delivered within 167 days, and inspected at destination. Packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, using unit container 10, dry preservation method, and no special marking. Packaging and shipping of hazardous materials, including mercury-containing components, are governed by strict prohibitions against intentional mercury addition except for approved functional applications such as specific instruments, sensors, controls, and naval-specified reagents, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. All requirements referenced in the DLA Master List of Technical and Quality Requirements are incorporated by reference, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Delivery is to be made to the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, New Cumberland PA 17070-5002, with a required ship date of February 1, 2027, and an original delivery deadline of November 12, 2026. Transportation logistics follow DLAD Proc Notes C19 and C20, and the unit of issue is defined per DoD standards linked in the document. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with Alexis Selby as the primary point of contact. Covered defense information provisions apply, and all materials must conform to ANSI X12 unit of issue standards. The solicitation was posted August 5, 2026, with responses due by August 17, 2026, under NAICS code 335311 for electronic control manufacturing.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12VM
The contract specifies a single unit of a cable assembly with NSN 6150016631413 and part number MK4654117-06, procured under solicitation SPE4A6-26-T-12VM for the USS NEW ORLEANS LPD 18. Delivery is required within 20 days FOB destination, with no variance permitted in quantity, and both inspection and acceptance occur at the delivery point. The item must be packaged per MIL-STD-2073-1E with packaging code U, marked in accordance with MIL-STD-129 using no special marking code, and palletized following DLA packaging requirements. Technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with sampling conducted under MIL-STD-1916 or an equivalent zero-based plan, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes default to major. Any configuration changes require an Engineering Change Proposal or variance request. The shipment is destined for FPO AP 96673, and transportation protocols C19 and C20 apply. The contract is issued by the Department of Defense’s ASC Commodities Division, with Berkeley Vaughan as the primary point of contact, and the required delivery date is June 8, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS
Solicitation # SPE4A6-26-T-12SJ
The contract involves the procurement of a wiring harness with NSN/part number 6150-01-674-4547, quantity one unit, under solicitation SPE4A6-26-T-12SJ, with a response deadline of August 13, 2026, and delivery required 380 days after contract award. The item contains technical data subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled data is restricted to DLA contractors holding valid US/Canada Joint Certification Program certification, completion of mandatory DOD export control training, and approved status through the DLA questionnaire process. The contracting activity is the ASC Commodities Division under the Department of Defense, with performance designated for New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Marcita Robinson, reachable via email and phone provided.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
SENSING ELEMENT, FIR
Solicitation # SPE8E8-26-T-5052
The contract pertains to the procurement of 11 units of a FIR sensing element with NSN 6350-37-530-6236 and part number 90100040030-00A, supplied by CONSILIUM MARINE US INC and CONSILIUM MARINE & SAFETY AB. The unit price is $11.00 per unit, totaling $121.00, with delivery required FOB origin within 167 days from the contract award. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s master list of technical and quality requirements, including MIL-STD-129 for labeling and RP001 for palletization. If the item is hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging in accordance with ASTM D3951 is required, though DLA requirements take precedence. The item must be marked and labeled per specified standards, and the unit of issue is each (EA) with zero variance allowed in quantity. The required ship date is February 1, 2027, with an original delivery deadline of February 23, 2027. Transportation and shipping instructions reference DLAD procurement notes C19 and C20. The solicitation number is SPE8E8-26-T-5052, issued August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 335311 for the Department of Defense.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-250E
The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
ALARM, BACK-UP, VEHIC
Solicitation # SPE8E8-26-T-5061
The contract pertains to the procurement of four units of an alarm, backup, vehicle system identified by NSN 6350-01-714-4239 and part number EP-0002558, with a unit price of $4.00 and a total price of $16.00. Delivery is required within 167 days from the contract date, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination. The quantity permitted is strictly fixed at four units with zero variance allowed. Packaging must comply with DLA’s master list of technical and quality requirements, which supersede ASTM D3951, and hazardous materials must adhere to FED-STD-313 and TQ requirement IP025, while non-hazardous items must follow commercially acceptable packaging standards. All packaging and labeling must conform to MIL-STD-129, and palletization must meet RP001 DLA packaging requirements. The delivery destination is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the required ship date set for February 1, 2027, and the original delivery deadline on February 26, 2027. The contract falls under solicitation SPE8E8-26-T-5061 issued by the Department of Defense through the DLA, with technical and quality specifications governed by the DLA Master List referenced through their official portal, and all documentation must align with the revision in effect on the solicitation issuance date.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
SIREN, ELECTRIC MOTO
Solicitation # SPE8E8-26-T-5035
The contract is for the procurement of eight electric sirens identified by NSN 6350-01-653-8128 under solicitation SPE8E8-26-T-5035, issued by the Department of Defense through the DLA New Cumberland Facility. The item is classified under NAICS code 335311 and requires delivery within 167 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size, and any amendments superseding prior versions. Government identification must be removed from non-accepted supplies in accordance with RQ011. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the primary point of contact is Alexis Selby at alexis.selby@dla.mil or 312-444-8487. Performance is to be delivered to New Cumberland, Pennsylvania, with a zip code of 17070-5002, and full details are accessible via the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A5-26-T-330X
The contract pertains to the procurement of one unit of a wiring harness designated as P/N 458-59661-1 with NSN 6150-01-677-6345, issued under solicitation SPE4A5-26-T-330X by the Department of Defense through DLA. Delivery is required within 170 days to Tinker AFB, Oklahoma, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination per established military standards. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special markings required, and palletization follows DLA’s specific packaging guidelines. The item is classified as a critical application and is subject to tailored quality requirements, including technical and quality specifications referenced from the DLA Master List. Zero-defect sampling is mandated under MIL-STD-1916 or equivalent zero-based plans unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from non-accepted items. Unit of issue is each (EA), and the contract enforces strict adherence to DLA packaging, marking, and test equipment standards. The required delivery date was originally set for June 9, 2028, with a needed ship date of January 31, 2027.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A6-26-T-12SK
This contract pertains to the procurement of a cable assembly under solicitation SPE4A6-26-T-12SK, with a required quantity of 49 units and a delivery timeframe of 441 days after order. The item is governed by stringent technical and quality requirements including CMMC Level 2 certification for third-party assessment organizations, compliance with DFARS 252.225-7048 for export-controlled technical data, and adherence to ISO 9001:2015 quality standards for both manufacturers and non-manufacturers. All technical and quality provisions referenced are sourced from the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date depending on acquisition size. The cable assembly is subject to physical identification and bare item marking requirements, and all non-accepted supplies must have government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at specified levels or AQLs. Measuring and test equipment must meet defined standards. Export-controlled technical data associated with the item is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DLA export control training, and formal authorization. The item's NSN is 0001S00000053, and performance is directed to Texarkana, TX. The contract mandates compliance with DLA packaging standards and inspection at origin, and contractors new to this item or those altering chemistry or manufacturing processes are subject to additional fat testing requirements.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A5-26-T-330V
This contract pertains to the procurement of a wiring harness, specifically identified by part number 901-076-711-109 and NSN 6150-01-662-4945, for delivery in the quantity of nine units. The item is classified as a critical application item supplied by Bell Textron Inc and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 sampling standards with zero non-conformances required unless otherwise stipulated, and specifies verification levels and AQLs for critical, major, and minor attributes. Cybersecurity compliance is required at CMMC Level 2, and all items must be physically marked in accordance with RQ017, with packaging and marking conforming to MIL-STD-2073-1E and MIL-STD-129. The delivery is FOB origin with inspection and acceptance occurring at destination, and the full quantity must be delivered within 170 days from the contract award, with a required delivery date of April 26, 2029. Packaging and palletization follow DLA-specific requirements, and special marking is not required. The shipment destination is the DLA Distribution facility in New Cumberland, PA, and transportation guidelines are governed by DLAD procedural notes. The solicitation was issued under contract number SPE4A5-26-T-330V with a response deadline in August 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335311
New
DIBBS
SOCKET BASE, FIRE DE
Solicitation # SPE8E8-26-T-5079
The contract pertains to the procurement of eight socket base, fire de units identified by NSN 6350-33-210-9888 and part number SPB-ADAPT-NA from CONSILIUM MARINE & SAFETY AB. The solicitation number is SPE8E8-26-T-5079, with a response deadline of August 17, 2026, and a required delivery date of April 16, 2027, allowing 167 days for fulfillment. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The units must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which override any applicable ASTM D3951 standards, and must adhere to MIL-STD-129 for labeling. If deemed hazardous under FED-STD-313, packaging must follow TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, subject to DLA standards. Palletization must comply with RP001, and all packaging must be marked with the specified Unit of Issue and Quantity per Unit Pack. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with a ship date of February 1, 2027. The contract references additional technical and documentation guidelines including SAR requirements and proper removal of government identification from non-accepted items. The unit price is $8.00 per ea, totaling $64.00.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
Federal
CABLE, MOTOR POWER
Solicitation # N0010426QNE05
This contract pertains to the manufacture of the CABLE, MOTOR POWER under solicitation N0010426QNE05, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA. The requirement is subject to Emergency Acquisition Flexibilities and will be awarded bilaterally, requiring the contractor’s written acceptance before execution. All contractual documents are considered issued upon electronic transmission, including email. The specification mandates compliance with drawing 8630046-2 and incorporates key military standards including MIL-STD-129 for marking, MIL-STD-973 for configuration control, and ISO 9001 for quality systems. The item must be mercury-free, with any use of metallic mercury requiring prior written approval and strict containment protocols to prevent contamination, particularly due to its corrosive and toxic risks in submarine and surface ship environments. Vendors must be certified under NAVSEA S9320-AM-PRO-020/MLDG, and each delivered assembly must include a certified Test Inspection Report. The contract imposes rigorous quality assurance obligations, requiring the contractor to maintain a government-acceptable quality system and assume full responsibility for inspection and compliance, regardless of whether government inspections are conducted. Inspection records must be retained for four years after final delivery. Packaging must follow MIL-STD-2073, and all subcontractors must adhere to the same requirements. The solicitation is set aside for small businesses and includes mandatory representations and certifications regarding veterans’ employment, workers with disabilities, Buy American provisions, and cybersecurity maturity levels. Payment will be processed via Wide Area Workflow with receiving report and invoice combo. The contractor must submit all configuration changes, deviations, or waivers through formal channels to the Contracting Officer, and unauthorized modifications are at the contractor’s sole risk. Offers are evaluated with consideration of past performance, and access to restricted documents requires authorization through designated government contacts. The response deadline is September 4, 2026.
Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A5-26-T-331N
The contract is for a single-leg wire rope assembly with part number 0001S00000052 and a quantity of eight units, issued under solicitation SPE4A5-26-T-331N with a delivery deadline of 509 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must be physically marked per RQ017, and component qualification is required under QPL/QML lists referenced in procurement note H02. Inspection and acceptance occur at the manufacturer’s origin unless otherwise directed. Sampling follows MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned specific verification levels or AQLs; unspecified attributes are treated as major. Zero non-conformances are required for acceptance unless stated otherwise. The item is subject to export controls under ITAR or EAR, with technical data restricted to contractors holding approved JCP certification, having completed required DOD export control training, and received DLA authorization. DFARS 252.225-7048 governs the handling of this controlled data, extending restrictions to all foreign nationals regardless of location. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO. Covered defense information is subject to RD002, and the contractor must comply with tailored higher-level quality requirements. Item Unique Identification is not required per customer request, with DFARS 252.211-7003(c)(1)(i) applying. The contract is managed by the Department of Defense’s ASC Supplier Oper OEM Division with performance in New Cumberland, PA, and primary point of contact is Hien-Van Trinh.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
LIGHT ASSEMBLY, INDI
Solicitation # SPE4A5-26-T-330Y
This contract involves the supply of a commercial item identified as LIGHT ASSEMBLY, INDI, with part number 2275804-3 and NSN 6220013306650, for a single unit under solicitation SPE4A5-26-T-330Y. The item must be delivered within 20 days of contract award, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the origin. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, using specified methods for preservation, wrapping, cushioning, and marking, with plastics avoided where possible. Palletization follows DLA packaging requirements, and no special marking is required. Technical and quality standards referenced by R or I numbers are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified, with attribute levels defined for critical, major, and minor characteristics. Item Unique Identification is not required per the Service customer’s request. The item is destined for the Taiwan Army at Kaohsiung, with shipment coordinated through designated freight protocols and referencing specific DLA procedural notes. The original required delivery date is August 7, 2026, and the contract was posted on August 5, 2026, with responses due by August 13, 2026.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CLAMP, BLOCK
Solicitation # SPE4A5-26-T-331D
The contract pertains to the procurement of 101 units of CLAMP, BLOCK with NSN 1560016946944 and part number 842-349845-14, intended for a critical application under The Boeing Company. Delivery is required within 170 days from the contract date, with FOB origin terms and inspection and acceptance occurring at the destination. The item must comply with stringent packaging and marking standards including MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must adhere to DLA’s procurement standards, and palletization follows RP001 guidelines. The part is subject to FAA bare item marking requirements and airworthiness approval under RQ019, necessitating a Certificate of Airworthiness and Conformance. Supply chain traceability documentation must be retained per DLA Directive Procurement Notes C03, and configuration change management is governed by RQ002. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attribute levels are predefined as VII, IV, and II for critical, major, and minor characteristics respectively. The acquisition falls under simplified procedures, with technical and quality requirements referenced from the DLA Master List, and no unit of issue translation is needed as the DoD unit is used. All applicable CDRLs and technical data packages are to be reviewed, with the delivery address specified as the DLA Distribution facility in New Cumberland, PA. The contract solicitation was posted on August 5, 2026, with a response deadline of August 13, 2026, and the original required delivery date is September 3, 2027.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRF
Solicitation # SPE4A5-26-T-331L
This solicitation requires the procurement of a roller bearing designated as BEARING, ROLLER, AIRF with NSN 3110-01-662-3661, with a total quantity of nine units to be delivered within 154 days. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, and the cost of all bearing components—including rolling elements, retainer, inner race, and outer race—produced in these regions must exceed 50% of the total component cost, as mandated by DFARS Clause 252.225-7016. A completed Contractor’s Declaration, obtainable from the DLA Foreign Bearing Waiver website, is mandatory for consideration; failure to submit this documentation will disqualify the quote. In the event no compliant offerings are received, the solicitation may be canceled or held pending a waiver request under DFARS 225.7009-4. The item is designated as a Critical Application Item and must comply with Federal Aviation Administration airworthiness requirements, including the submission of a Certificate of Airworthiness and Conformance. Technical and quality requirements are governed by the DLA Master List, with applicable revisions controlled by the solicitation or award date. Packaging and preservation must adhere strictly to MIL-STD-2073-1E and MIL-DTL-197M, with specific preservation methods determined by bearing type and closure, and protective compounds selected according to prescribed tables. Marking must follow MIL-STD-129, and palletization must comply with DLA packaging standards. The item is subject to zero-defect sampling under MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Supply chain traceability documentation is required as per DLA Directive Procurement Note C03, and contractors must retain all related records. Configuration change management, removal of government identification from non-accepted items, and FAA bare item marking requirements are also applicable. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The unit of issue is each, with a total price of $9.00 per unit, and the order is being procured by the Department of Defense under Solicitation SPE4A5-2
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-331S
This contract pertains to the procurement of a window panel for aircraft, specifically identified by part number 205-030-285-002 and 205-030-285-2, with a total quantity of 51 units to be delivered within 127 days under contract SPE4A5-26-T-331S. The item is designated as a critical application component, and delivery is FOB origin with inspection and acceptance occurring at the destination. Strict packaging requirements mandate compliance with MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with all DLA Master List of Technical and Quality Requirements taking precedence. Item Unique Identification is not required per the service customer’s request, and physical marking must follow RQ017 guidelines. Quality assurance requires adherence to ISO 9001:2015 for manufacturers and non-manufacturers, and sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified. Cybersecurity compliance includes a CMMC Level 2 self-assessment, and the contractor must handle covered defense information in accordance with RD002. A first article test is mandated as a separate line item, with one unit required for testing; pricing for this line item must be included in the offer, though no award will be made if the test is waived. The delivery address is DLA Distribution Cherry Point in North Carolina, and transportation must comply with DLAD procedural notes C19 and C20. The contract enforces a zero variance in quantity, and all packaging must be palletized per DLA packaging requirements.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
MODULE ASSEMBLY, FRE
Solicitation # SPE4A5-26-T-331C
This contract pertains to the procurement of one unit of a Module Assembly, Frequency, with NSN 6110-00-885-2327 and part number 690416, supplied by Hamilton Sundstrand Corporation under contract SPE4A5-26-T-331C. Delivery is required within 170 days from the award date, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The item is not subject to Item Unique Identification per government request, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting standards. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization in accordance with DLA Packaging Requirements, and all markings and labeling must adhere strictly to applicable military standards. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment requirements and manage configuration changes through Engineering Change Proposals or formal variance requests. Removal of government identification from non-accepted supplies is required, and measuring and test equipment must meet specified standards. The delivery address is DLA Distribution Depot Hill in Hill AFB, Utah, with a final ship date of January 31, 2027 and an original required delivery date of May 21, 2028. The unit of issue is each (EA), with no quantity variance permitted, and all documentation and compliance responsibilities are binding under the terms outlined in the solicitation.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
AXLE ASSEMBLY
Solicitation # SPE4A5-26-R-0264
The procurement is for 51 axle assemblies, NSN 1615-01-502-6255, part number 96250-32107-041, intended for use in the H-60 Seahawk helicopter, with a firm-fixed price contract structure and delivery required within 260 days from award to New Cumberland, PA. Only approved sources—Sikorsky Aircraft Corporation and Delta-Ray Industries Inc.—are currently authorized to supply this item, and any other manufacturer must submit a full source approval package to be considered. Technical data, specifications, or drawings are not available from the Government, and requests for such information will not be accepted. FOB Origin inspection and acceptance apply, and the item is classified as a Critical Safety Item, subject to the Supplier Performance Risk System. The acquisition is unrestricted, and all responsible sources may submit offers evaluated based on price, past performance, and other criteria outlined in the solicitation. The solicitation will be accessible via the DIBBS system and upon direct request to the buyer, with an anticipated posting date of August 5, 2026, and a response deadline of August 4, 2026. The contract is managed by DLA Aviation under the Department of Defense, with primary point of contact Samuel Kogi at the Richmond, VA office.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 30 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A5-26-T-331U
The contract is for the procurement of 18 units of a structural plate designated as P/N 901-031-171-140 with NSN 1560-01-595-9330, classified as a Critical Application Item under the Boeing Company. Delivery is required within 170 days to the destination specified as DLA Distribution San Diego, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-129 for marking and labeling, with hazardous materials subject to TQ requirement IP025 per FED-STD-313 and non-hazardous items to ASTM D3951, though all DLA Master List requirements supersede ASTM standards. Packaging and palletization must meet DLA’s RP001 requirements, and sampling for quality verification follows MIL-STD-1916 or ASQ Z1.4 with zero non-conformances required unless otherwise stipulated, with critical, major, and unspecified attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively. The supplier must comply with DLA’s technical and quality requirements referenced by R and I numbers from the official DLA Master List, and implement CMMC Level 2 self-assessment for cybersecurity. Government identification must be removed from non-accepted supplies, and the unit of issue is each (EA). The contract was solicited under SPE4A5-26-T-331U with a response deadline in August 2026 and a required delivery date of September 28, 2027, though a ship date of January 31, 2027, has been noted.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE4A5-26-T-331T
The contract is for a single butterfly valve identified by NSN 4820-01-104-9226 and part number 397964-1-3, supplied by Honeywell International Inc. under solicitation SPE4A5-26-T-331T, with a required delivery within 170 days of award and a final delivery date of March 3, 2028. The valve is classified as a critical application item and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with all items labeled and palletized accordingly, while removal of government identification from non-accepted supplies and physical marking of bare items are mandatory. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and unit of issue is each (EA) with no variance allowed in quantity. Delivery is FOB origin to Corpus Christi, Texas, with inspection and acceptance occurring at destination. The contract mandates compliance with Defense Federal Acquisition Regulation Supplement (DFARS) provisions and includes specific transportation instructions under DLAD Proc Notes C19 and C20. All documentation and certifications must reflect current DLA policies effective on the solicitation issue date or award date, whichever governs.
Industrial Valve Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332439
New
DIBBS
SHIM
Solicitation # SPE4A5-26-T-331R
The contract specifies the procurement of a commercial item, a shim identified by part number 2664022-009 and NSN 5365012243742, with a quantity of three units to be delivered within five days of contract award. Delivery is FOB origin, with inspection and acceptance points set at the destination, and no variance in quantity is permitted. Packaging must comply with MIL-STD-2073-1E, with specific preparation methods and materials outlined, and marking must adhere to MIL-STD-129 with no special marking required. Palletization follows DLA packaging requirements, and shipment must be sent by the fastest traceable means, explicitly excluding parcel post. The delivery address is Tinker Air Force Base, Oklahoma, with a designated receiving point and contact information provided for government logistics coordination. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Sampling procedures follow MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major. Zero non-conformances are required in sampling unless otherwise stated. Unit of issue is each (EA), and the item is not subject to Item Unique Identification under DFARS 252.211-7003(c)(1)(i) due to service customer request. The solicitation number is SPE4A5-26-T-331R, with a response deadline of August 13, 2026, and an original required delivery date of July 31, 2026. Contract administration and point of contact are managed by the Department of Defense’s ASC Supplier Oper OEM Division, with Jessica Baake as the primary liaison.
Other Metal Container Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334417
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE4A5-26-T-330U
This contract specifies the procurement of an adapter connector with part number 30-269-2P20F07 and NSN 5935-01-466-6841, for a quantity of five units to be delivered FOB origin within 170 days, with a required ship date of January 31, 2027, and an original delivery deadline of April 20, 2028. The contract enforces strict compliance with DLA packaging requirements, MIL-STD-2073-1E for preparation, and MIL-STD-129 for marking, with no special marking required. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise defined, with verification levels of VII, IV, and II assigned to critical, major, and minor attributes respectively; unspecified attributes are treated as major. The product is classified as a critical application item and must meet all technical and quality requirements listed in the DLA Master List, incorporating referenced R and I numbers. Cybersecurity compliance requires a CMMC Level 2 self-assessment. The item is subject to configuration change management procedures, variance requests, and removal of government identification from non-accepted supplies. Physical identification and bare item marking are mandatory per RQ017. Delivery is to be made to DLA Distribution San Joaquin at Tracy, California, with no quantity variance permitted. Transportation instructions align with DLAD Proc Notes C19 and C20, and all documentation must adhere to the contract’s unit of issue and sourcing standards.
Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335139
New
DIBBS
LAMP, INCANDESCENT
Solicitation # SPE4A5-26-T-331M
This contract specifies the procurement of 161 incandescent lamps identified by NSN 6240016715328 and part number 767 from General Electric Company DBA GE, with delivery required within 21 days to Industries of the Blind Inc in Greensboro, NC. The item is classified as a commercial off-the-shelf (COTS) product and is designated as a critical application item, subject to strict technical and quality standards. All requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging, preservation, marking, and traceability, must be strictly followed per DLA directives. Supply chain traceability documentation must be retained by the contractor in compliance with DLAD Procurement Note C03 from August 2016. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special fragile labeling and palletization meeting DLA packaging guidelines. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances under sampling standards such as MIL-STD-1916 or ASQ H1331, unless otherwise specified. The contract mandates FAA airworthiness approval and bare item marking compliance, with additional quality controls governed by Reference QAP 13873. The unit of issue is each (EA), priced at $161.00 for a total contract value of $25,921.00, with no quantity variance allowed. Delivery is FOB origin, and transportation protocols must follow DLA Procurement Notes C19 and C20. The government has explicitly deemed surplus material unacceptable for this NSN, and the item requires full compliance with all federal aviation and defense procurement regulations.
Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details