Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Wiring Harness Manufacturing and Delivery for NSN 6150013325926

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

A custom military-spec wiring harness is to be designed, fabricated, assembled, tested, and delivered in accordance with strict defense standards for National Stock Number 6150013325926. The contractor is responsible for using only mil-spec components and ensuring full traceability throughout every stage of production, from raw materials to final assembly. All work must comply with Department of Defense requirements, including the use of approved packaging methods that meet military logistics and storage protocols. The contract is issued as a subcontract under the Defense Logistics Agency and falls under NAICS code 334418, indicating specialization in electronic component and accessory manufacturing. Performance is expected to support U.S. military systems, with no specific place of performance designated but all deliverables bound by DoD compliance standards. The solicitation was posted in July 2026 and is tied to contract SPE4A626P8180, with delivery expected to occur under the broader scope of DLA’s supply chain obligations.

General Info

Custom mil-spec wiring harness for NSN 6150013325926, compliant with DoD standards, traceable, DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design, fabricate, assemble, test, and deliver a custom military-spec wiring harness with traceability, mil-spec components, and DoD-compliant packaging.

Similar Contracts

Same NAICS industry code

NOTICE OF INTENT TO AWARD SOLE SOURCE - BEP SPARE PART # ELP1414 - BOARD, TRACKINGFRAMEThe Treasury Common Services Center - Acquisition Services, acting on behalf of the Office of Supply Chain Management, intends to award a sole-source, firm-fixed-price contract for the BEP Spare Part ELP1414, a Tracking Frame board manufactured by Atlantic Zeiser with part number HEAB010000480 and KBA order number SP34780-EAB010000480, identified as SMARTSKIP BOX PARTS Figure/Item 7.3.38, at a quantity of one per block. The contract will be awarded exclusively to Zeiser, Inc., under the authority of FAR 13.106-1(b)(1), using FAR Part 12 procedures for commercial product acquisitions, with no competitive solicitation planned unless information received necessitates reconsideration. All responses must be submitted in writing via email to melva.robinson@treasury.gov and naweed.nezam@treasury.gov no later than 12:00 PM Eastern Standard Time on August 5, 2026. Only entities currently active in the System for Award Management (SAM) are eligible to respond, and any costs incurred in preparing or submitting information are the sole responsibility of the respondent, with no reimbursement from the government. The procurement is managed under solicitation number 2031ZA26N00050, with the primary point of contact located in Washington, D.C., and the place of performance designated as Fort Worth, Texas, 76131.

Office Of The Chief Procurement Officer

POSTED

about 8 hours ago

DEADLINE

Precision Fixed Resistor Manufacturing (MIL-DTL-39032 Compliant)The contract calls for the manufacture of 34 precision fixed composition resistors that fully comply with the MIL-DTL-39032 military specification, ensuring high reliability and performance under demanding operational conditions. Each resistor must be produced with complete traceability from raw materials through final assembly, including detailed documentation of manufacturing processes, component sourcing, and quality control checkpoints. All units are subject to rigorous testing protocols to verify electrical characteristics, environmental durability, and mechanical integrity, with full certification provided to confirm adherence to the specified standards. The work is classified as a subcontract under the NAICS code 334418, related to other electronic component manufacturing, and is managed by the Fluid Handling Division of the Department of Defense. The place of performance is designated as Tracy, California, with a zip code of 95304-5000, indicating where the manufacturing and testing activities must be conducted. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with all submissions required to meet the stringent technical and compliance requirements outlined in the military specification. Full adherence to documentation, certification, and delivery timelines is mandatory to satisfy contractual obligations.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Electrical Component Manufacturing – Retainer-Ejector CardThe contract solicits the manufacture and delivery of 15 units of a RETAINER-EJECTOR, ELECTRICAL CARD with NSN 5998-01-684-9165, a specialized component used in defense electronics systems. The work is classified as a subcontract under NAICS code 334418, indicating it pertains to other electronic component manufacturing, and is being procured by the Department of Defense through the Maritime Supply Chain ESOC Buys organization. The place of performance is designated as Tobyhanna, Pennsylvania, with a zip code of 18466-5050, suggesting the finished components will be delivered to a known military electronics maintenance and logistics facility. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, allowing interested vendors a limited window to submit proposals. All deliverables must meet exacting military specs given the component’s critical role in defense systems, and the contract is managed through the official DIBBS platform under reference number SPE7M026T022X.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Precision Resistor Assembly ManufacturingThe contract requires the manufacture of a military-spec resistor assembly identified by NSN 5905010197689, adhering strictly to MIL-PRF-81705 for performance specifications, MIL-STD-129 for packaging and labeling, and J-STD-609 for marking and traceability. The work encompasses the full lifecycle from design validation through production, rigorous testing, and comprehensive documentation to ensure every unit is fully traceable. All components and processes must meet exacting defense standards to guarantee reliability under operational conditions. The solicitation is designated as a subcontract under NAICS code 334418 and is managed by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office. The place of performance is specified as Camp Pendleton with ZIP code 92055-5761. Bidders must submit responses by August 10, 2026, following the posting date of July 28, 2026, and must be prepared to furnish complete compliance documentation, including lot traceability, test reports, and certification of material origins, to support military logistics and quality assurance requirements.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Electronic Component Supply – Solid State RelaysThe contract pertains to the supply of 42 units of solid-state relays identified by NSN 5945-01-737-0977 and part number GPRM-S1C12D-3, adhering strictly to military and federal standards for labeling, packaging, and hazardous material documentation. These components are critical for defense-related applications and must meet exacting quality and compliance benchmarks to ensure operational reliability in military systems. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and is structured as a subcontract under NAICS code 334418, which classifies it within the electronic component manufacturing sector. The placing agency is the Fluid Handling Division of the Department of Defense, with performance required at a specified location in Tracy, California, ZIP code 95304-5000. All deliverables must be fully compliant with applicable federal regulations, and the contractor is expected to provide documentation that confirms adherence to hazardous material handling protocols and federal labeling requirements.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Electronic Component ManufacturingThe contract requires the full manufacturing of three units of a precision electronic component according to military drawings Revision A Generation 1, encompassing all phases from assembly and testing to complete documentation for delivery to the Department of Defense. The work must comply strictly with military specifications and deliverables, with end-product documentation ensured for DoD acceptance and traceability. Performance is designated for the location in Tracy, California, with a zip code of 95304-5000, and the effort falls under NAICS code 334418, which categorizes electronic component manufacturing. This is a subcontract opportunity issued by the ACTIVE DEVICES DIVISION of the Department of Defense, with a posted date of July 28, 2026, and a firm response deadline of August 10, 2026. The solicitation is accessible via the DIBBS platform under reference number SPE7M526T356E, and while no set-aside type is specified, the requirement is clearly directed toward qualified subcontractors capable of meeting strict military-grade production and documentation standards. All units must be fully tested and accompanied by comprehensive technical documentation to satisfy DoD delivery protocols.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Electronic Component Assembly ManufacturingThe contract entails the manufacture and assembly of circuit card assemblies to meet military specifications, requiring strict adherence to defense-grade quality and performance standards. All components must be sourced exclusively from DLA-approved suppliers to ensure traceability, reliability, and compliance with federal procurement requirements. The work must adhere to ESD control protocols throughout all phases of production and packaging must conform to established military packaging standards to safeguard against damage during transit and storage. Performance is required at the facility located in Virginia Beach, Virginia, with a firm deadline for responses set for August 11, 2026. This is a subcontract opportunity under NAICS code 334418, issued by the Department of Defense through the Maritime Supply Chain organization. Participation requires full capability to execute under military compliance frameworks, with no set-aside provisions specified, meaning all eligible entities may compete without restriction based on business size or status.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Electronic Component Supply – High-Reliability Electrical PartPICO ELECTRONICS INC has been contracted to supply twenty units of a high-reliability military-spec electronic component designated by NSN 5950014137899 and part number G200873-1, ensuring full compliance with federal and military standards for performance, durability, and quality. The component is critical to defense systems requiring operational integrity under extreme conditions, and all units must be traceable, tested, and certified to meet applicable DoD specifications. The contract is structured as a subcontract under the broader MARITIME SUPPLY CHAIN initiative within the Department of Defense, with performance required at Pearl Harbor, 96860-5033. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, and the NAICS code 334418 confirms the scope falls under electronic component manufacturing. All deliverables must adhere to defense-grade manufacturing and documentation protocols without exception.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Printed Circuit Board (PCB) Fabrication & Component SourcingThe contract pertains to the sub-tier supply of printed circuit boards and associated electronic components for use in interface units, requiring full traceability throughout the manufacturing and sourcing process. All components must comply with RoHS and REACH regulations, ensuring environmental and health safety standards are met, and must be supported by verified documentation from trusted suppliers to guarantee authenticity and quality. The work is classified under NAICS code 334418, indicating a focus on electronic component and board manufacturing, and is structured as a subcontract under the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 28, 2026, with a mandatory response deadline of August 12, 2026, and performance is expected to support defense-related systems in accordance with strict procurement protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Circuit Card Assembly Manufacturing and SupplyThe contract requires the manufacture, testing, and delivery of a circuit card assembly compliant with military specifications, delivered under a fixed-price agreement to a government-designated location at Fort Campbell, Kentucky, with a zip code of 42223-5000. This is a subcontract under the Department of Defense, managed by the Maritime Supply Chain ESOC Buys office, and classified under NAICS code 334418, which pertains to other electronic component manufacturing. The work must adhere strictly to military standards, ensuring reliability and performance under demanding operational conditions. The solicitation was posted on July 28, 2026, with responses due by August 10, 2026, providing potential vendors a 13-day window to submit proposals. Completion and delivery timelines are critical, as the fixed-price structure places full financial responsibility on the contractor for meeting all technical, quality, and scheduling requirements without adjustment for cost overruns. All deliverables must be successfully tested and verified prior to shipment to the specified performance location.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CIRCUIT CARD ASSEMBThis contract is for the procurement of one circuit card assembly with part number 3318685 and NSN 5998-01-069-5575, issued under solicitation SPE7M0-26-T-022M by the Department of Defense through the Maritime Supply Chain ESOc Buys office. The item must be delivered within five days of the required delivery date of July 28, 2026, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, which is Fort Campbell, Kentucky, where the item must be shipped using traceable freight methods and explicitly excluding parcel post. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with marking adhering to MIL-STD-129 and no special markings required. The contract incorporates technical and quality requirements from the DLA Master List and mandates Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment compliance. The contractor must remove all government identification from non-accepted supplies and ensure packaging and labeling meet all federal standards. The contract identifies Honeywell International Inc. and L3 Technologies Inc. as qualified suppliers and requires the delivery to be marked for W34XC5 at Fort Campbell, with a designated RDD/NTCS shipment reference and a specific government use identifier. The purchase request number is 7017639072, and the unit price is $1.00 for one unit. The item falls under NAICS code 334418 and is subject to DoD unit of issue standards as outlined in official DLA documentation. The point of contact for inquiries is Audrey Acuna, and the solicitation has a response deadline of August 10, 2026. All deliverables must fulfill cybersecurity, packaging, marking, and delivery protocols as specified, with full compliance required to meet DLA and DoD procurement mandates.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

CIRCUIT CARD ASSEMBThe contract solicits three circuit card assemblies under NSN 5998-01-079-8322 with a delivery requirement of 425 days after delivery order issuance. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on the solicitation issue date or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed. Bare items must be physically marked in accordance with specified guidelines. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, or equivalent zero-based plans; critical, major, and minor attributes are verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. Unspecified attributes are treated as major unless otherwise defined, and zero non-conformances are required in sampling unless the contract states otherwise. This item contains technical data subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The solicitation number is SPE4A6-26-T-10EH, issued on July 28, 2026, with responses due by August 5, 2026, under NAICS code 334418, managed by the ASC Commodities Division of the Department of Defense. Primary point of contact is Jennifer Jacobs at the provided email and phone number.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Logistics and Destination Delivery ServicesThe contract titled Logistics and Destination Delivery Services is a subcontract under the Defense Logistics Agency, part of the Department of Defense, aimed at transporting and delivering packaged items to government-designated locations within a strict 20-day ADO window. The place of performance is specified as Pearl Harbor with a zip code of 96860-5033, indicating the primary operational hub for this logistics effort. The North American Industry Classification System code 484220 identifies the scope as specialized freight transportation, emphasizing the need for precision and timeliness in moving goods to secure military destinations. The solicitation was posted on July 28, 2026, with a firm deadline for responses set for August 10, 2026, allowing potential vendors a narrow window to prepare and submit their proposals. The contract’s structure suggests it is part of a larger, time-sensitive supply chain initiative requiring compliance with federal logistics standards and the ability to operate under stringent military delivery protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Packaging and Hazardous Materials Compliance ServicesThe contract requires the provision of military-compliant packaging, labeling, and hazardous materials documentation for government shipments under the Defense Logistics Agency, a component of the Department of Defense. All services must adhere to strict military standards to ensure the safe, secure, and regulatory-compliant handling of sensitive and hazardous materials during transport. The place of performance is specifically designated as Pearl Harbor, with a ZIP code of 96860-5033, indicating the operational focus of the shipments will center around this strategic military location. The NAICS code 561910 classifies this as an other support services contract, emphasizing the specialized logistics and compliance nature of the work. This is a subcontract opportunity with a response deadline of August 10, 2026, and was posted on July 28, 2026, giving potential vendors approximately three weeks to prepare and submit proposals. No set-aside provisions are specified, meaning the contract is open to all qualified entities regardless of small business designation or other categories.

Packaging and Labeling Services

POSTED

DEADLINE

Nonmetallic Channel SupplyThe contract calls for the supply of a nonmetallic channel identified by NSN 9390027224462, with all deliveries required to meet strict military packaging, labeling, and hazardous materials handling standards to ensure compatibility with defense logistics protocols. The item is intended for performance at Pearl Harbor, Hawaii, with the specific zip code 96860-5033 designated as the place of performance, indicating a critical operational or maintenance site within the U.S. Pacific Command area. This subcontract is governed under NAICS code 335999, which covers other electrical equipment and component manufacturing, and is issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 28, 2026, with responses due no later than August 10, 2026, leaving a twelve-day window for qualified suppliers to submit proposals. Although no set-aside designation is specified, the contract remains open to eligible subcontractors who can meet the technical and regulatory demands of military-grade material procurement. Compliance with all DoD packaging and hazardous materials regulations is non-negotiable, requiring certified procedures for containment, labeling, and documentation throughout the supply chain. The procurement is managed through the DIBBS platform via the reference number SPE8E526T3704, and all parties must be prepared for rigorous inspection and audit readiness upon delivery.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Transportation and Delivery Logistics (FOB Origin to Destination)The contract requires the transportation of packaged ultra-high-molecular-weight polyethylene rods from the manufacturer to a final government consignee at Creech Air Force Base, Nevada, under FOB Destination terms, meaning the seller bears all costs and risks until the goods reach the designated delivery point. The delivery must be completed within twenty days after the date of award, ensuring strict adherence to the Defense Logistics Agency’s Fast Delivery Team program requirements. This subcontract falls under NAICS code 484220, classifying it as a freight transportation arrangement, and is managed by the Department of Defense through the Defense Logistics Agency. All activities must comply with DLA FDT standards, emphasizing timeliness, tracking, and documentation throughout the logistics chain. The solicitation opened on July 28, 2026, with responses due by August 10, 2026, and performance is focused solely on the specified location at Creech AFB with zip code 89018-7018.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Domestic UHMW Polyethylene Resin SupplyThe contract calls for the supply of raw ultra-high-molecular-weight polyethylene resin compliant with ASTM D4020 Type U, exclusively sourced from domestic suppliers to meet stringent Defense Federal Acquisition Regulation Supplement requirements. All materials must originate in the United States, ensuring adherence to the Buy American Act and full supply chain transparency, with documented proof of origin and manufacturing processes required throughout procurement. The resin is intended for use in defense applications and must maintain consistent quality and performance standards aligned with military-grade specifications. The contract is issued as a subcontract by the Defense Logistics Agency under the Department of Defense, with a planned performance location at Creech Air Force Base, Nevada, zip code 89018-7018. The solicitation, identified by the number SPE8E526T3710, was posted on July 28, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code 325211 identifies the relevant manufacturing sector, and while no specific set-aside designation is listed, the requirement for domestic sourcing effectively limits eligibility to U.S.-based producers. Participation requires confirmation of compliance with all applicable federal regulations governing material origin and defense supply chain integrity.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires comprehensive packaging and labeling services for ultra-high molecular weight polyethylene rods in strict compliance with MIL-STD-129 and MIL-STD-2073-1E standards, encompassing preservation techniques, barcoding, and all associated documentation to ensure military readiness and supply chain traceability. This subcontract is designated for performance at Creech Air Force Base, Nevada, with a zip code of 89018-7018, and is governed by NAICS code 561910, indicating specialized support services for transportation and logistics. All work must align with Department of Defense requirements under the Defense Logistics Agency, ensuring uniformity, durability, and regulatory adherence throughout the packaging lifecycle. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, allowing potential vendors limited time to prepare and submit proposals. Although no solicitation number is provided, the contract can be accessed through the DIBBS platform using the specified UI link. The performance location and military standards mandate precise execution, with no flexibility in labeling, preservation, or documentation protocols. Contractors must demonstrate proven capability in handling defense-grade materials and must be prepared to meet stringent documentation and audit requirements associated with federal military supply chains.

Packaging and Labeling Services

POSTED

DEADLINE

UHMW PE Plastic Round Section ManufacturingThe contract calls for the precision extrusion and cutting of ultra-high-molecular-weight polyethylene rods to meet ASTM D4020, Type U specifications, with a diameter of 1.625 inches and a fixed length of 4.0 feet. Each batch must undergo rigorous quality control to ensure dimensional accuracy, material integrity, and compliance with industry standards. The finished products are required to be packaged in accordance with military compliance protocols, ensuring durability, traceability, and readiness for defense logistics use. The performance location is designated as Creech Air Force Base with ZIP code 89018-7018, indicating the end-use context within a military operations environment. This subcontract, issued under NAICS code 325211 for plastic material manufacturing, was posted by the Defense Logistics Agency under the Department of Defense and is open for response until August 10, 2026. The solicitation is intended to secure a qualified supplier capable of consistently delivering high-performance UHMW PE components that meet exacting military specifications. Although no set-aside designation is specified, the requirement reflects a strategic procurement for defense-critical materials, emphasizing reliability, standardized production, and secure handling through approved packaging methods. All deliverables must align with the technical and logistical expectations of federal defense supply chains.

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Military-Compliant Marking and Labeling ServicesThe contract requires the application of durable, MIL-STD-129-compliant markings on military packaging, including special code '32' for shelf-life items, hazard labels, and Data Matrix barcodes to ensure traceability and regulatory adherence. All labeling must meet strict Department of Defense standards for durability, legibility, and format to support logistics and inventory management across the supply chain. The work is tied to a subcontract under the Defense Logistics Agency, with performance expected at the designated location in Dothan, Alabama, with a ZIP code of 36301-4632. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with the NAICS code 323111 indicating the work falls under printing and related support activities. Compliance with all military marking specifications is mandatory, and failure to meet these requirements may result in rejection of deliverables.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Cybersecurity Compliance and Data Safeguarding for Government SubmissionsThe contract requires the implementation and maintenance of NIST SP 800-171 security controls to protect covered defense information handled under government submissions, ensuring compliance with the Defense Federal Acquisition Regulation Supplement clauses DFARS 252.204-7012 and 252.240-7997. This includes establishing a robust cybersecurity framework to safeguard sensitive data, executing timely cyber incident reporting procedures, and maintaining ongoing adherence to federal cybersecurity standards throughout the contract period. The work is to be performed at the designated location in Dothan, Alabama, with all security and reporting obligations binding on the contractor as a subcontractor under the Defense Logistics Agency. The solicitation, issued under NAICS code 541512 for other computer-related services, is open for responses until August 10, 2026, with all submissions required to demonstrate capability to meet stringent defense information protection requirements. The contractor must possess the technical and procedural infrastructure to support continuous compliance, including documentation, audits, and incident response workflows aligned with federal mandates. Participation is limited to entities capable of operating within the Department of Defense’s cybersecurity ecosystem and ensuring end-to-end protection of controlled unclassified information as defined by applicable regulations.

Computer Systems Design Services

POSTED

DEADLINE

Shelf-Life Compliant Packaging of Military Identification MarkersThe contract requires the supply and dry packaging of military identification markers with NSN 7690-01-182-3476, ensuring full compliance with shelf-life control standards and the specific packaging requirements outlined in MIL-STD-2073-1E and MIL-STD-129. Special emphasis is placed on the use of the dry packaging method and the inclusion of the designated special marking code '32' to meet operational and logistical standards. All items must be properly labeled and prepared for long-term storage and deployment within the military supply chain. The solicitation is issued as a subcontract under the Defense Logistics Agency, with performance required at DOTHAN, Alabama, ZIP 36301-4632. The North American Industry Classification System code is 323111, indicating the focus on printing and related support activities. The opportunity was posted on July 28, 2026, and responses are due by August 10, 2026. No set-aside type is specified, and the contract is positioned for industry participation through the DIBBS platform.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Accelerated Payments to Small Business SubcontractorsThe contract facilitates accelerated payments to small business subcontractors in accordance with clause 52.232-40, ensuring timely financial processing to support small business participation in defense-related projects. It is issued by the Defense Logistics Agency under the Department of Defense with a NAICS code of 522110, indicating a focus on financial services related to contract administration. The place of performance is designated as Port Hueneme, California, with a ZIP code of 93043-4306, specifying the operational region where the contracted services will be executed. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, allowing potential contractors a limited window to submit proposals. This is a subcontract type contract, meaning it involves the arrangement of payment processing services between a prime contractor and small business subcontractors, rather than direct government procurement. There is no set-aside designation specified, and no point of contact is listed in the provided data. The contract’s primary function is administrative and financial, aiming to improve cash flow for small businesses by expediting payments as mandated by federal regulations, with all activity managed through the DIBBS platform using the referenced solicitation number SPE7L726T4483.

Commercial Banking

POSTED

DEADLINE

Commercial Subcontracting (Flow-Down Compliance)The contract pertains to the management of subcontractor compliance with flow-down clauses for commercial items, requiring strict adherence to cybersecurity protocols, proper marking standards, and hazardous materials handling requirements. The responsibility falls on the prime contractor to ensure all subcontractors meet federal and defense-specific obligations tied to commercial supply chain activities, with an emphasis on safeguarding information systems and maintaining regulatory conformity throughout the subcontracting tier. This engagement is governed under NAICS code 541611 and is administered by the Defense Logistics Agency under the Department of Defense, with performance obligations centered in Port Hueneme, CA, 93043-4306. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and is classified as a subcontract type with no set-aside designation. All interested parties must address the full scope of flow-down requirements, including the accurate transmission and enforcement of applicable clauses from prime contract to subcontractor levels. Compliance will be rigorously assessed, and failure to meet cybersecurity, labeling, or hazardous materials standards may result in contractual penalties or termination. The portal for accessing details and submitting responses is accessible via the provided DIBBS link.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE