Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WIRING HARNESS

Active
SPE7L5-26-T-4338Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a wiring harness identified by NSN 6150-01-618-3328 and part number 3911818, with a quantity of 13 units to be delivered FOB origin within 275 days from the contract date, targeting a required delivery date of April 22, 2027. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required, and must be palletized according to DLA guidelines. The material has no shelf life restriction and is subject to sampling procedures in accordance with MIL-STD-1916 or ASQ H1331 Table 1, where critical, major, and minor attributes must be verified at levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively; unspecifed attributes are considered major. Acceptance criteria require zero non-conformances in the sample lot unless otherwise stated in the contract. Inspection and acceptance occur at the destination, and the unit price is $13.00 per EA for a total price of $169.00. The delivery address is DLA Distribution Red River, Building 499, Texarkana TX 75507-5000, and all transportation details adhere to DLAD Proc Notes C19 and C20. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with the relevant revision controlled by the solicitation issue date for simplified acquisitions. The contract is issued under SPE7L5-26-T-4338 and classified under NAICS code 334419, with procurement information and contact details provided by Bradley Evans at the Department of Defense.

General Info

13 wiring harnesses sought by DLA under SPE7L5-26-T-4338, due July 20, 2026

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

10TH STREET AND K AVENUE, TEXARKANA, TX, 75507-5000, US

Set-Aside

NONE

Documents

(1)

SPE7L5-26-T-4338.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS ENGINES
View Agency Profile
Office AddressUS
Contacts
Bradley Evans
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRING HARNESS
WIRING HARNESS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Identify Too:
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
OSHKOSH DEFENSE LLC 75Q65 P/N 3911818
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017385439 0001 EA 13.000
NSN/MATERIAL:6150016183328
SPE7L5-26-T-4338
SECTION B
PR: 7017385439 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0275
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3227
DLA DISTRIBUTION RED RIVER
RECEIVING BLDG 499
10TH STREET AND K AVENUE
TEXARKANA TX 75507-5000
US
Need Ship Date:04/22/2027 Original Required Delivery Date:04/22/2027
SPE7L5-26-T-4338 NSN/Part Number: 6150-01-618-3328 Quantity: 13 EA Purchase Request: 7017385439QTY: 13 Delivery: 275 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
Sensitive Electronic Switch ManufacturingThe contract outlines the manufacture and delivery of five sensitive electronic switches designated by NSN 5930-01-264-1728, requiring strict adherence to Department of Defense technical standards, specifically MIL-STD-1916 or ASQ H1331 sampling plans and acceptable quality limit defect thresholds. The work must be completed in compliance with these rigorous quality control protocols to ensure operational reliability and conformity to military specifications. Performance of the contract is required at Tinker Air Force Base, Oklahoma, with a delivery schedule aligned to the posted response deadline of July 31, 2026, and a solicitation posted on July 20, 2026. This is a subcontract opportunity under NAICS code 334419, managed by the Electrical Devices Division of the Department of Defense, with no specific set-aside designation applied. All proposals must be submitted before the deadline to be considered for award.
ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
Wiring Harness Manufacturing and AssemblyThe contract involves the manufacture and assembly of 2,060 military-specification electrical wiring harnesses identified by NSN 6150-01-248-2549, requiring full traceability throughout production and compliance with strict packaging standards. All units must be delivered to locations within the continental United States as directed by order, ensuring timely and precise fulfillment of military logistics needs. The work is classified as a subcontract under NAICS code 334419, with the Defense Logistics Agency acting on behalf of the Department of Defense to oversee procurement. The solicitation was posted on July 20, 2026, and performance will be coordinated through the established DLA contracting framework using the referenced award number SPE4A626D5714.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 334419
New
DIBBS
Microcircuit Manufacturing and Supply (NSN 5962-01-281-4172)The contract entails the manufacture and delivery of seven qualified linear microcircuits identified by NSN 5962-01-281-4172 and designated as RD004, all of which must adhere to stringent military specifications ensuring performance, reliability, and environmental resilience. Each unit requires full traceability throughout the production lifecycle, from raw materials to final assembly, to guarantee authenticity and compliance with defense standards. In addition to hardware specifications, the supplier must implement and maintain CMMC Level 2 cybersecurity controls to safeguard controlled unclassified information during manufacturing, handling, and communication, ensuring alignment with Department of Defense cybersecurity requirements. This subcontract is issued under the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 334419 for other semiconductor and related device manufacturing. The contract is not subject to a specific set-aside designation and does not specify a place of performance or point of contact. The solicitation was posted on July 20, 2026, and the award reference is identified as SPE7M126P8879. Compliance with all technical, quality, and cybersecurity provisions is mandatory, and failure to meet these obligations could result in rejection of delivery or contract termination. The supplier is expected to demonstrate proven capability in defense electronics manufacturing and secure supply chain practices.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 334419
New
DIBBS
Rotary Switch Supply (Commercial Off-the-Shelf Item)The contract involves the supply of 11 units of a commercial off-the-shelf rotary switch identified by NSN 5930011333696, a component that meets military specifications despite being commercially available. The item is classified under NAICS code 334419, indicating its alignment with electronic component manufacturing, and is being procured as a subcontract under the Department of Defense via the Defense Logistics Agency. Although the solicitation number is not provided and no specific place of performance or point of contact is listed, the contract was posted on July 20, 2026, signaling its placement in the future procurement timeline. The absence of set-aside classification suggests the contract is open to any qualified commercial supplier without restrictions based on business size or status. The electronic component will support defense systems requiring reliable, specification-compliant rotary switches sourced from the commercial market.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

N/A
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract pertains to the procurement of six LIGHT, INDICATOR units with NSN 6210-01-316-4583 and part number 70902-41838-101, supplied by DUCOMMUN LABARGE TECHNOLOGIES, INC. The units are priced at $6.00 each, totaling $36.00, with delivery required within 20 days under FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the point of origin, and packaging must strictly adhere to MIL-STD-2073-1E standards with specific preservation, wrapping, and unit containment requirements. Marking of the shipment must comply with MIL-STD-129, with no special marking codes applied, and palletization must meet DLA packaging guidelines. The delivery destination is the 2nd Supply Depot in Busan, South Korea, with the freight forwarder and transportation details governed by DLA procedural notes C19 and C20. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and the acquisition falls under the Defense Logistics Agency, with the solicitation number SPE8E7-26-T-3264. Covered Defense Information may apply, and documentation for source approval must be submitted in accordance with RC001. The required delivery date is June 17, 2026, and the contract is subject to DLA’s unit of issue standards and oversight for government use, with designated administrative codes for distribution and advancement.
Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThe item is a PUSH SWITCH with NSN 5930-01-316-7681, quantity of 23 units, under purchase request 7017436985, with a delivery schedule of 157 days ADO. This item is classified as non-CAI and non-CSI and is subject to strict export control regulations under either ITAR or EAR, meaning any transfer of associated technical data to foreign persons—even within the United States—requires prior authorization from the Department of State or Department of Commerce. The technical data is governed by DFARS 252.225-7048, and access is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DLA training on handling export-controlled data, and are formally approved by DLA to access such information. The solicitation number is SPE7M2-26-T-5696, posted on July 20, 2026, with responses due by July 31, 2026, under NAICS code 334419. The contracting office is the Department of Defense’s Nuclear Reactor Program, with performance taking place in San Diego, California, and primary point of contact being Alisha Blanton.
NUCLEAR REACTOR PROGRAM

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SWITCH ASSEMBLYThe contract pertains to the procurement of a SWITCH ASSEMBLY with NSN 5930-01-605-5090 and part number 159400G1, under solicitation SPE7M2-26-T-5695, issued by the Department of Defense’s Nuclear Reactor Program. Ten units are required, to be delivered FOB origin within 144 days of contract award, with no tolerance for quantity variance. Delivery must be made to the DLA Distribution facility at New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and MIL-DTL-28786 for preservation, all in alignment with the latest revisions. Packaging must be palletized per RP001 and labeled with the specified pack code U, with all markings and procedures meeting federal standards. Strict prohibitions apply to the intentional addition of mercury or mercury-containing compounds in or contacting the switch assembly, except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents explicitly authorized by NAVSEA. Any portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates all applicable technical and quality requirements from the DLA Master List, with revisions tied to the solicitation issue date. Transportation and shipping instructions reference DLA procedural notes C19 and C20, and the delivery must be completed no later than December 23, 2026, despite an original required delivery date of September 1, 2027. The unit of issue is each, priced at $10.00 per unit, with total contract value of $100.00.
NUCLEAR REACTOR PROGRAM

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThe contract pertains to the procurement of 14 units of a PUSH SWITCH with NSN 5930-01-226-8184 under solicitation SPE7M8-26-T-5454, issued by the Department of Defense’s Electrical Devices Division. Delivery is required within 157 days after award, with a response deadline of July 31, 2026, and the solicitation was posted on July 20, 2026. The acquisition falls under NAICS code 334419 and is subject to DLA Packaging Requirements for Procurement, which reference technical and quality standards from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware, except for functional uses in batteries, fluorescent lights, specific instruments, sensors, controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and feature a secondary containment boundary compliant with NAVSEA 5100-003D. The offeror must submit a complete data package for both the primary and alternate parts, as no existing data is available for this item. Performance is designated for New Cumberland, PA, with Dondiego Boler listed as the primary point of contact for inquiries.
ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334419
New
DIBBS
LEAD, ELECTRICALThis contract is for a single unit of Lead, Electrical, identified by Part Number 868001113 and NSN 6150-12-359-5761, issued under solicitation SPE4A0-26-T-3971 by the Department of Defense through DLA. The item is classified as a critical application and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, accessible via the specified URL. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special marking required. The supply must be delivered FOB origin within five days of the contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Sampling follows MIL-STD-1916 or equivalent zero-based inspection methods, with acceptance criteria of zero non-conformances unless otherwise specified. The item must be shipped via traceable freight, not parcel post, to the receiving point at Fort Carson, Colorado. Documentation for source approval is required, and any government identification must be removed from non-accepted supplies. The contract mandates compliance with DLA packaging and identification standards, including palletization and intermediate container requirements. The required delivery date is July 13, 2026, and the point of contact is Danita Davis from DLA.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, SENSITIVEThe contract pertains to the procurement of a SWITCH, SENSITIVE with NSN 5930011968357, quantity of 529 units, under solicitation SPE7M8-26-T-5240, with a delivery schedule of 168 days ADO and FOB ORIGIN terms. The item is to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply strictly with the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for non-hazardous goods and TQ Requirement IP025 for hazardous materials as defined by FED-STD-313. All packaging and labeling must adhere to MIL-STD-129, including barcoding, with palletization following RP001 guidelines. Sampling methods require zero non-conformance acceptance per MIL-STD-1916 or ASQ Z1.4, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are classified as major. The contract includes mandatory FAR and DFARS clauses addressing equal opportunity, trafficking in persons, employment verification, sustainable products, hazardous material identification, cybersecurity safeguards, electronic invoicing via WAWF, export control, prohibitions on hexavalent chromium and covered Chinese military company items, and safeguarding covered defense information. Contractor compliance with the DFARS 252.204-7012 clause on cyber incident reporting and NIST SP 800-171 assessment requirements is enforced. The solicitation requires submission via DIBBS by the July 20, 2026 deadline and mandates a Valid Unique Entity ID and CAGE code. Payment processing is governed by WAWF with no alternative invoicing methods permitted. The contract does not specify pricing for this solicitation but references historical prices for context, and no option quantities or extended pricing are provided. Evaluation factors and award basis are not explicitly defined, though compliance with technical and quality requirements appears decisive. The clause 252.223-7001 requires hazardous material labeling per OSHA’s Hazard Communication Standard unless precluded by other federal statutes, with pre-award submission of labels and MSDS required. No key personnel
ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, TOGGLEThe contract solicitation SPE7M8-26-T-5353 seeks five units of the SWITCH,TOGGLE with NSN 5930011702136 under a DLA procurement, with delivery required 155 days after award at the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be packaged and labeled per MIL-STD-129 with palletization in accordance with RP001: DLA Packaging Requirements for Procurement, and all packaging requirements from the DLA Master List of Technical and Quality Requirements supersede commercial standards such as ASTM D3951. For hazardous materials as defined by FED-STD-313, packaging must meet TQ Requirement IP025, while non-hazardous items must use commercial packaging but remain subject to the DLA Master List’s stricter controls. Marking and labeling must include the Unit of Issue and Quantity per Unit Pack as specified, and barcoding must follow MIL-STD-129’s Data Matrix format. Inspection and acceptance occur at the destination, with delivery terms conflicting between FOB Origin in the CLIN and FOB Destination referenced elsewhere, requiring clarification. The contract mandates use of WAWF for invoicing and prohibits IPP. Compliance with DFARS clauses including NIST SP 800-171 for cybersecurity, Hazard Communication Standards, and Transportation of Supplies by Sea—Basic is required, with notification obligations for safety issues and potential levies on payments. Offerors must provide UEI and CAGE codes and represent their small business status or socioeconomic classification. No pricing is listed in the CLIN, and the contract type remains unspecified. The solicitation closes on July 23, 2026, and responses must be submitted electronically via DIBBS, with all administrative and financial details finalized in the award document.
ELECTRICAL DEVICES DIV

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334419
New
DIBBS
BAR, LIFTINGThe contract pertains to the procurement of one unit of a BAR, LIFTING item with NSN 4933-00-495-6861 and part number 116C3827, issued under solicitation SPE4A0-26-T-3965 by the Department of Defense through DLA. Delivery is required within five days of award, FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the delivery point. The item must be packaged in compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001 DLA Packaging Requirements. The supply is destined for USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 under vessel shipment protocols, with transportation governed by DLAD Proc Notes C19 and C20. The contract incorporates technical and quality standards identified by R or I numbers from the DLA Master List, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. Critical attributes are verified at Level VII or AQL 0.1, major at Level IV or AQL 1.0, and minor at Level II or AQL 4.0. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and bare item marking must comply with RQ017. The supplier must remove all government identification from non-accepted supplies per RQ011, and the item must be delivered by July 10, 2026.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

NAICS: 541380
New
DIBBS
Product Verification Testing (PVT) ServicesThe contract requires the execution of Product Verification Testing (PVT) to validate the performance and compliance of filter assemblies against the military specification MIL-S-901 and Procurement Note E05, ensuring these components meet stringent defense standards for reliability and durability under operational conditions. This work is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for businesses certified by the Small Business Administration, with the North American Industry Classification System code 541380 indicating engineering and technical services. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is issued by the Department of Defense under the organization name LAND SUPPLIER OPNS ENGINES. All testing activities are to be performed at the designated place of performance in Tracy, California, with a zip code of 95304-5000, and interested parties must submit their responses through the DIBBS portal using the provided solicitation number SPE7L5026Q0157.
Testing Laboratories and Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Marking (MIL-STD-129 & MIL-STD-2073-1E)The contract requires comprehensive military-compliant packaging, barcoding, and labeling of filter assemblies in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards for delivery to the Defense Logistics Agency. All work must adhere to federal military specifications for documentation, marking, and shipment readiness, ensuring full traceability and compliance throughout the supply chain. The performance location is designated as Tracy, California, with a ZIP code of 95304-5000, and the work is classified as a total small business set-aside under the SBA program, indicating exclusive eligibility for small businesses as defined by the Small Business Administration. The NAICS code 561910 indicates the nature of the work falls under Other Support Activities for Transportation, reflecting the logistical and packaging services required. The solicitation was posted on July 20, 2026, with a response deadline of July 27, 2026, and is structured as a subcontract opportunity managed by the Department of Defense under the Land Supplier Operations Engines organization. Bidders must be prepared to meet exacting military packaging and labeling requirements and must submit proposals via the DIBBS portal using the provided solicitation number SPE7L526Q0157.
Packaging and Labeling Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CUI Protection (NIST SP 800-171)The contract requires the implementation and maintenance of robust cybersecurity controls to safeguard Covered Defense Information in full alignment with NIST SP 800-171 and DFARS 252.204-7012 requirements. This includes establishing, documenting, and continuously enforcing security measures across information systems to ensure the confidentiality, integrity, and availability of controlled unclassified information. Compliance must be maintained throughout the contract lifecycle with regular assessments, incident reporting, and remediation of identified vulnerabilities to meet federal defense standards. This is a small business set-aside subcontract under NAICS code 541512, exclusively available to small businesses as defined by the SBA. Performance is required at a designated location in Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026, with the contracting activity under the Department of Defense through LAND SUPPLIER OPNS ENGINES. All work must be executed in accordance with federal acquisition regulations and defense cybersecurity mandates, with no exceptions permitted for non-compliant practices or undocumented controls.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability Documentation & ComplianceThe contract requires full supply chain traceability for all components used in filter assembly, ensuring strict adherence to DFARS regulations and military documentation standards. The contractor must maintain detailed, auditable records that trace every part from origin through final assembly, guaranteeing compliance with defense procurement requirements and enabling full transparency across the supply chain. This includes accurate labeling, serialization, and documentation of material sources, manufacturing processes, and quality control data to meet military-grade integrity expectations. This is a total small business set-aside under NAICS code 541611, specifically designated for small businesses by the SBA, with performance based in Tracy, California, 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 27, 2026. It is structured as a subcontract under the Department of Defense's Land Supplier Operations Engines organization, with all documentation and compliance activities expected to align with federal defense supply chain protocols. Failure to meet traceability requirements will result in non-compliance and potential contract failure.
Administrative Management and General Management Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332996
New
DIBBS
Manufacturing of Fluid Filter Assemblies (NSN 2910-01-422-7809)The contract calls for the full manufacturing and assembly of seven fluid filter units per military specifications, encompassing every phase from design and fabrication to testing and comprehensive documentation, all requiring formal approval from government engineering sources. Performance of the work is centered in Tracy, California, with the final deliverables expected to meet stringent defense standards under the NSN 2910-01-422-7809. The effort falls under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the SBA to promote small business participation in federal procurement, and is classified under the NAICS code 332996 for other fabricated metal product manufacturing. The opportunity is issued by the Department of Defense under the organizational name Land Supplier Opns Engines, with a response deadline of July 27, 2026, and was posted on July 20, 2026. Although the solicitation number is not listed, the contract is structured as a subcontract and is accessible via the DIBBS platform. No point of contact is provided in the data, indicating that all inquiries must be directed through the official procurement portal. The absence of specified city, state, or country in the office address suggests that the administrative office may be centralized, but the physical production and delivery must be completed at the designated performance location in Tracy.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance (CMMC Level 2 Assessment Support)The contract requires support for achieving CMMC Level 2 compliance through comprehensive documentation, system assessment, and coordinated efforts with a certified third-party assessment organization to secure formal certification. This includes developing and maintaining cybersecurity policies, procedures, and evidence-based records that align with the CMMC framework, identifying gaps in current controls, and implementing necessary remediation measures to meet mandatory requirements. The work will involve close collaboration with the assigned C3PAO throughout the assessment process to ensure accurate scoring and timely resolution of findings. The effort is scoped as a subcontract under the Department of Defense, with performance centered in New Cumberland, Pennsylvania, and tied to the NAICS code 541512 for computer systems design services. Proposals must be submitted by July 31, 2026, and the contract is issued by LAND SUPPLIER OPNS ENGINES. While specific point of contact information is not provided, all submissions and inquiries must be routed through the official DIBBS portal linked in the solicitation. The contract does not include a set-aside designation and is open to eligible subcontractors capable of delivering full-scope CMMC Level 2 compliance services.
Computer Systems Design Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Packaging & Marking Compliance ServicesThe contract requires strict adherence to MIL-STD-2073-1E and DLA RP001 packaging standards to ensure all shipments are properly secured, protected, and prepared for military logistics. All items must be marked in accordance with MIL-STD-129, including the correct use of barcodes, labeling formats, and traceability information to support inventory control and distribution. The contractor is also responsible for the de-identification of rejected items, removing any sensitive or proprietary data before disposal or return to ensure compliance with security and privacy protocols. This work is part of a subcontract under the Department of Defense, managed by LAND SUPPLIER OPNS ENGINES, with performance required at the location in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under NAICS code 493190 for other warehousing and storage services.
Other Warehousing and Storage

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Documentation SupportThe contract requires the preparation and submission of Material Safety Data Sheets and hazard labels in full compliance with OSHA’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement, ensuring all hazardous material documentation meets federal regulatory requirements. This includes the accurate classification, labeling, and dissemination of safety information for chemicals and materials used in defense-related operations, with a mandatory flow-down of compliance obligations to all subcontractors involved in the supply chain. Documentation must reflect current regulatory standards and be rigorously maintained to support safety and operational readiness across the defense logistics network. Performance is centered in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the work falls under NAICS code 541690, classifying it as other scientific and technical consulting services. The solicitation was posted on July 20, 2026, with a response deadline of July 31, 2026, indicating a short turnaround for qualified firms to submit proposals. The contract is structured as a subcontract under the Department of Defense’s Land Supplier Operations Engines organization, emphasizing the need for precision in documentation to meet military supply chain integrity standards. Proposals must demonstrate proven expertise in hazardous materials compliance and the ability to implement consistent, verifiable safety protocols across tiered vendor networks.
Other Scientific and Technical Consulting Services

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 423830
New
DIBBS
Fuel Metering Pump Supply (Commercial Off-The-Shelf Item)The contract requires the supply of ten units of Fuel Metering Pumps identified by NSN 2910-01-688-5763, which are commercial off-the-shelf items meeting all specified technical requirements for performance, packaging, and labeling. Delivery must be completed within 156 days from the contract award date, with the place of performance located at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation is structured as a subcontract under NAICS code 423830 and is managed by the Department of Defense through its Land Supplier Operations Engines organization. Responses are due by July 31, 2026, with the request posted on July 20, 2026, and all submissions must align fully with the technical and logistical parameters outlined in the solicitation.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
REGULATOR-CONTROL, EThis contract pertains to the procurement of an electronic engine regulator, identified by NSN 2990-01-417-9443 and part numbers 300298, 924011, and 924011-28, supplied by TRI-TEC MANUFACTURING LLC. Three units are required with a total price of $3.00 per unit, to be delivered FOB origin within 168 days, with no tolerance for quantity variance. The item is designated as a critical application item and must comply with strict technical and quality standards incorporated by reference from the DLA Master List of Technical and Quality Requirements. Mercury or mercury-containing compounds are strictly prohibited unless specifically exempted for functional components such as batteries, fluorescent lights, sensors, controls, weapon systems, or authorized chemical reagents; portable devices containing mercury must be shockproof and equipped with a secondary containment system per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes. All units must be delivered to the specified warehouse in Tracy, CA, and transportation must follow DLA procedural notes C19 and C20. The solicitation was issued under contract number SPE7L5-26-T-4388, with a response deadline of July 20, 2026, and an original delivery requirement of May 14, 2027, while the needed ship date is January 5, 2027.
Other Motor Vehicle Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332119
New
DIBBS
SPACER, RINGThe contract pertains to the procurement of 234 units of a SPACER, RING with NSN 5365016432231 and part number 4082316, issued under solicitation SPE7L5-26-T-4531. Delivery is required within 247 days of contract award, with shipment to be made FOB origin and inspection and acceptance occurring at the destination. The unit price is $234.00 per item, resulting in a total contract value of $54,756.00. Packaging must comply with ASTM D3951, but DLA’s Master List of Technical and Quality Requirements, referenced via R or I numbers, take precedence and must be fully observed. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The specified Unit of Issue is each (EA), with no tolerance for quantity variance. The final delivery destination is the DLA Distribution DDSP New Cumberland Facility located at 2083 Normandy Drive, New Cumberland, PA 17070-5002. The original required delivery date is December 5, 2025, and the contract specifies that any government identification on non-accepted supplies must be removed. For transportation logistics, DLA Procurement Notes C19 and C20 apply. The responsible point of contact is Bradley Evans, reachable via phone and email provided, and the contract aligns with NAICS code 332119 under the Department of Defense’s Land Supplier Operations Engines.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 20 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336310
New
DIBBS
FILTER ELEMENT, FLUIDThe contract pertains to the procurement of a fluid filter element with part number 3991475 and NSN 2910016761870, supplied by CATERPILLAR INC, in a quantity of 11 units. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific preservation methods, wrapping, and unit container codes, while marking follows MIL-STD-129 with no special marking required. Palletization must adhere to DLA packaging guidelines. Delivery is FOB origin with a lead time of 168 days, and the required delivery date is December 8, 2026, with a need ship date of January 5, 2027. The unit price is $11.00 per unit, totaling $121.00, with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the shipment must be sent to the DLA Distribution facility at New Cumberland, Pennsylvania. Transportation and freight details are governed by DLA procedural notes C19 and C20. The solicitation number is SPE7L5-26-T-4409, issued by the Department of Defense under NAICS code 336310, with the primary point of contact being Randy Ith.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details