Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WIRING HARNESS

Active
SPE4A6-26-Q-1203Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 107 wiring harnesses with NSN 6150-01-676-4143 under solicitation SPE4A6-26-Q-1203, with a response deadline of July 27, 2026, and a delivery requirement of 100 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the scale of the acquisition. Packaging must comply with DLA packaging standards, and non-accepted supplies must have all government identification removed. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 Table 1, with predefined verification levels or AQLs assigned to critical, major, and minor attributes, and zero non-conformances required unless otherwise stated. Physical identification of items must meet specified marking standards. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorizations from the Department of State or Commerce. Only contractors with approved US/Canada Joint Certification Program status, completed training on handling DOD export-controlled data, and DLA authorization are permitted access to such data. The contracting activity is the ASC Commodities Division under the Department of Defense, with Mary Munar designated as the point of contact.

General Info

Procure 107 wiring harnesses, deliver in 100 days, comply with DLA standards, ITAR/EAR controls, and authorized access only.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-Q-1203.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
MARY MUNAR
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-676-4143 Quantity: 107 EA Purchase Request: 7017272630QTY: 107 Delivery: 100 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThe contract specifies a single cable assembly identified by NSN 5995-01-680-4126, with a delivery requirement of 155 days after order. It incorporates stringent technical and quality standards referenced through R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. The item is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements as administered by a certified third-party assessment organization, and the contract includes provisions for physical identification and bare item marking. Covered defense information applies, and all packaging must comply with DLA packaging standards. The technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and only DLA contractors with approved JCP certification, completed export control training, and formal approval may access it. The requirement is governed by DFARS 252.225-7048, and non-accepted supplies must have government identification removed. The solicitation, issued under SPE4A0-26-T-4020 with a response deadline of July 31, 2026, is classified under NAICS 335931 and managed by the Department of Defense’s Aviation Supply Chain Esoc Buys office, with Danita Davis as the primary point of contact.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to a single cable assembly with NSN 5995-01-725-0155, requiring delivery within five days of award, and is governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers. Compliance with cybersecurity requirements mandates CMMC Level 2 certification by a third-party assessment organization, and adherence to DLA packaging specifications is enforced. All items must be marked in accordance with physical identification standards, and any non-accepted supplies must have government identification removed prior to return. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with verification levels or AQLs assigned based on attribute criticality—VII for critical, IV for major, II for minor—and unspecified attributes default to major. Zero non-conformances are required in sample lots unless otherwise stated. The technical data associated with this item is subject to export control under ITAR or EAR, requiring authorization for any disclosure to foreign persons, including foreign nationals within the U.S., and DFARS 252.225-7048 applies. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The solicitation, issued under SPE4A6-26-T-09MQ, has a response deadline of July 31, 2026, and is managed by the Department of Defense’s ASC Commodities Division with performance at Camp Pendleton.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
SWITCH, PRESSUREThis contract pertains to the procurement of a single pressure switch, identified by NSN 5930014622771 and part number 15824 from HYDRA-ELECTRIC COMPANY, with a delivery requirement of one unit. The item is designated as a critical application component and must be delivered FOB origin within 274 days, with no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and strict packaging standards are mandated under MIL-STD-2073-1E and MIL-DTL-28786C, with marking conforming to MIL-STD-129P and including the special code 05 for delicate instrument. Packaging must also adhere to DLA’s overarching packaging requirements and hazardous materials protocols under IP025. The delivery address is specified as DLA Distribution San Diego, with the original required delivery date set for November 12, 2026, and a need ship date of May 5, 2027. All technical and quality specifications referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is governed by tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and government identification must be removed from any non-accepted supplies. The solicitation number is SPE7M8-26-T-5570, issued on July 23, 2026, with responses due by August 3, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
HARNESS ASSEMBLY, SIThis contract specifies the procurement of a harness assembly designated as SI with NSN 5999-01-577-3815 and part numbers 5151041-005 for Raytheon Company and ABC56537-005 for Glenair Inc. Two units are required at a unit price of $2.00, with a total contract value of $4.00, and delivery must be made FOB origin within 94 days of the required delivery date of July 1, 2026, with an actual ship date no later than March 24, 2026. The item is classified as a critical application item and is subject to strict technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking, and palletization must adhere to DLA packaging requirements. The harness assembly must be delivered to the specified DLA distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance occur at the destination. Cybersecurity compliance is mandated through CMMC Level 2 self-assessment, and all supplies must be marked in accordance with physical identification standards. Removal of government identification from non-accepted supplies is required, and hazardous materials handling, if applicable, must meet IP025 standards. The DLA unit of issue is in each, and all transportation logistics are governed by DLAD procedural notes C19 and C20.
ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECThis contract specifies the procurement of a cable assembly with part number C174.00 and NSN 5995-01-551-8016, requiring one unit to be delivered within 20 days to the USS GRIDLEY DDG 101 at FPO AP 96666, with delivery terms FOB destination and no variance allowed in quantity. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, unit containers, and marking requirements; mercury and mercury compounds are strictly prohibited in packaging and preservation. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are classified with corresponding verification levels or AQLs. The contractor must adhere to DLA’s packaging and identification standards, including the removal of government identification from non-accepted items and physical marking of bare items. Cybersecurity compliance at CMMC Level 2 is required, and covered defense information protections apply. The item must be shipped via traceable means using the RDD 777 code, and parcel post is explicitly prohibited. The contract references the DLA Master List of Technical and Quality Requirements for incorporated specifications and uses the DoD authorized unit of issue, with final acceptance occurring at the delivery point. The solicitation was issued under SPE4A6-26-T-09NM with a response deadline of July 31, 2026, and the original required delivery date is June 23, 2026.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARDThis contract, issued under solicitation SPE4A7-26-T-592W by the Department of Defense through the ASC Supplier Oper AE and AF Division, specifies the procurement of 83 units of a Terminal Board with NSN 5940002424603 and part number 1106 from Regal Beloit America, Inc. Delivery is required FOB origin within 169 days, with a firm quantity of 83 units and no variance permitted. Inspection and acceptance occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E, including specific preservation methods, wrap materials, and unit container requirements, while marking must adhere to MIL-STD-129 without special codes. The items are to be palletized in accordance with DLA packaging requirements, and shipment is directed to the DLA Distribution Depot in Tinker AFB, Oklahoma. The contract incorporates critical technical and quality requirements from the DLA Master List, including provisions prohibiting intentional addition or direct contact of mercury or mercury-containing compounds unless exempted for specific functional applications such as batteries, sensors, or weapons systems, with additional containment requirements for portable devices. Sampling must follow MIL-STD-1916 or a comparable zero-defect plan, assigning verification levels or AQLs based on attribute criticality, with zero non-conformances required unless otherwise stated. Documentation for source approval is governed by RC001, and the item is classified as a critical application. The contract enforces strict compliance with standardized unit of issue, transportation protocols, and federal acquisition protocols, with the vendor required to meet all applicable quality, packaging, and marking standards as defined by DLA and DoD directives, with the required delivery date set for January 26, 2027.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
WIRING HARNESS, BRANCHEThe contract involves the procurement of two branched wiring harnesses identified by NSN 5995-01-651-8578, with a delivery deadline of 200 days after order. The solicitation number is SPE4A6-26-T-09KX, posted on July 23, 2026, with responses due by July 31, 2026, under NAICS code 335931 for other electrical equipment and component manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and amendment dates. The item is subject to DLA packaging standards, inspection and acceptance at origin, and mandatory removal of government identification from non-accepted supplies. Component qualification is governed by Qualified Products Lists or Qualified Manufacturers Lists, with procurement note H02 applying. Item Unique Identification is waived per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) in effect. Technical data associated with the harness is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without authorization, and applies to all entities including foreign subsidiaries. Access to controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and formal DLA approval. The place of performance is Tracy, California, with primary point of contact Gloria Frimpong at DLA’s ASC Commodities Division under the Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPECA cable assembly specified under solicitation SPE4A6-26-T-09GL is being procured by the Department of Defense through the ASC Commodities Division, with a single unit of one assembly identified by NSN 5995-01-696-7792 and part number CBLBA-F00780 from LIND ELECTRONICS, LLC. The contract requires strict adherence to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with verification protocols mandated by MIL-STD-1916 or comparable zero-based sampling plans, and zero non-conformances required unless otherwise stated. Inspection and acceptance are both set at destination, with delivery mandated within 20 days of award under FOB origin terms and no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special markings required, while palletization adheres to DLA packaging guidelines. The item is to be delivered to the 11th MEU CE at Camp Pendleton, California, with shipping instructions referencing DLAD Proc Notes C19 and C20. The required delivery date is July 17, 2026, and the contract assigns the NAICS code 335931, reflecting its classification under other electrical equipment and component manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335931
New
DIBBS
PLUG, END SEAL, ELECTRICThe contract pertains to the procurement of 10,979 units of a plug, end seal for electrical connectors, identified by NSN 5935-01-620-3669 and part number 809-155 from Glenair, Inc. The item is classified as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. The use of any Class I ozone-depleting substances in manufacturing, testing, or cleaning is strictly prohibited unless explicit written approval is obtained from the Contracting Officer, though this restriction does not apply to commercial items as defined in FAR 11.001 or to part-numbered-only items. Packaging must adhere to MIL-STD-129 and the DLA Packaging Requirements for Procurement, with hazardous materials meeting Fed-Std-313 and TQ Requirement IP025, while non-hazardous items must be commercially packaged accordingly. Physical identification and marking requirements apply, and any administrative part number changes or substitutions require prior written authorization from the Approved Manufacturer and approval by the Product Specialist or Authorizing Engineering Support Activity. The delivery is FOB origin with zero variance allowance, inspection and acceptance occurring at destination, and the required delivery date is 168 days from the contract award, with a need ship date of January 19, 2027. All items must be delivered to DLA Distribution Cherry Point at Phantom Rd, Building 147, Bay A, Cherry Point, NC 28533-5040, in compliance with DLA transport protocols, and the contract was issued under solicitation SPE7M5-26-T-348N with a response deadline of August 3, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
LEAD, HANDTERMINALThe contract pertains to the procurement of two units of LEAD, HANDTERMINAL with NSN 6625-01-435-6343 under Purchase Request 7017603366, with a total quantity of seven units required. Delivery must be completed within 67 days after contract award, and the solicitation is managed by the Maritime Supply Chain under the Department of Defense. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless a subsequent amendment supersedes it. Removal of government identification from non-accepted supplies is applicable, and alternate offerors must submit a complete data package including information for both the approved and alternate parts. The solicitation number is SPE7M1-26-T-226Q, posted on July 23, 2026, with a response deadline of August 3, 2026, under NAICS code 335931, and performance is required at New Cumberland, Pennsylvania, ZIP 17070-5002. Primary point of contact is Michael Reese, reachable via email and phone provided.
MARITIME SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR BODY, PLUGThe contract is for the procurement of 114 packaging groups of Connector Body, Plug, Electrical, with each packaging group containing 100 units, totaling 11,400 individual connectors. The item is identified by NSN 5935-01-608-3172 and manufacturer part number EZ-RJ45-5E-100 from BMP RACKMOUNT SOLUTIONS, LLC. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which take precedence over commercial standards. Packaging must comply with RP001 and MIL-STD-129, with non-hazardous items packaged in accordance with ASTM D3951 unless superseded by DLA requirements. Hazardous items must adhere to TQ requirement IP025 as defined in FED-STD-313. The unit of issue is PG, and the quantity has a strict zero percent variance allowance. Delivery is required FOB origin, with inspection and acceptance occurring at the destination. The delivery timeframe is 168 days from the contract award, with a required ship date of January 19, 2027, and an original required delivery date of November 12, 2026. The sole delivery address is DLA Distribution San Joaquin at Tracy, California. Transportation and shipping instructions must follow DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE7M5-26-T-347F, with a response deadline of August 3, 2026, and is categorized under NAICS code 335931. The primary point of contact is Margaret Smith of the Department of Defense, Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, POWEThe contract pertains to the procurement of two cable assemblies identified by NSN 5995-01-728-5304, with a delivery requirement of 20 days after contract award. The solicitation, issued under number SPE4A6-26-T-09LD, was posted on July 23, 2026, with responses due by July 31, 2026, and is managed by the ASC Commodities Division of the Department of Defense. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging, identification, and marking of non-accepted supplies must comply with DLA-specific regulations including RP001, RQ011, and RQ017. Inspection and sampling shall follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes must be verified at designated levels—VII for critical, IV for major, and II for minor—or their corresponding AQLs of 0.1, 1.0, and 4.0. The place of performance is listed as FPO with a zip code of 96660, and all inquiries should be directed to the primary point of contact, Alliyah Richmond, via the provided email and phone number.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 488510
New
DIBBS
Logistics and Invoicing via WAWFThis contract mandates the coordination of logistics services and the submission of electronic invoices through the Wide Area Workflow system, aligned with Defense Logistics Agency protocols to ensure accurate, timely, and compliant processing of payments. All activities must adhere strictly to DLA standards, with emphasis on seamless integration of supply chain operations and electronic invoicing to maintain operational efficiency and financial accountability. The subcontract is categorized under NAICS code 488510, indicating its focus on freight transportation arrangement, and is issued by the ASC Commodities Division under the Department of Defense. The response deadline is set for August 22, 2026, with no specific set-aside designation, and performance is expected to support the broader logistics infrastructure of the federal supply chain without location-specific constraints.
Freight Transportation Arrangement

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
DIBBS
Technical Data and Drawing ManagementThe contract requires the secure creation, control, and management of technical drawings, specifications, and process documentation for cable assemblies, with strict adherence to configuration control protocols and compliance with International Traffic in Arms Regulations and Export Administration Regulations. All technical data must be handled in a manner that ensures authorized access, prevents unauthorized dissemination, and maintains the integrity of controlled information throughout its lifecycle. The work is classified as a subcontract under NAICS code 541330, solicited by the ASC Commodities Division of the Department of Defense, with responses due by August 22, 2026. The performance location and specific point of contact are not detailed, but the requirement mandates rigorous data management practices aligned with federal defense standards. Participation is open to entities capable of meeting ITAR/EAR obligations and maintaining secure, auditable processes for technical documentation.
Engineering Services

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance and SPRS ReportingThe contract requires ongoing maintenance and reporting of Cybersecurity Maturity Model Certification (CMMC) Levels 1 through 3 and NIST SP 800-171 compliance through the Supplier Performance Reporting System (SPRS). This includes conducting self-assessments, compiling and submitting supporting documentation, and ensuring continuous audit readiness to meet federal cybersecurity standards. All compliance activities must be accurately recorded and updated in SPRS to demonstrate adherence to required controls and to support contractual obligations tied to handling controlled unclassified information. The work is structured as a subcontract under the Department of Defense’s ASC Commodities Division, with the North American Industry Classification System code 541512 indicating information technology services. The solicitation was posted on July 23, 2026, and responses are due by August 22, 2026. Performance is expected to occur within the scope of DoD contracting requirements, though specific performance location details are not provided. Compliance with these cybersecurity standards is critical for maintaining eligibility and trust as a subcontractor supporting defense operations, and failure to meet SPRS reporting or audit requirements could impact contract compliance and future award opportunities.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 493110
New
DIBBS
Specialized Packaging and Marking ServicesThe contract requires specialized packaging, labeling, and marking services for cable assemblies in full compliance with MIL-STD-129 standards, ensuring military-grade readiness for shipment and long-term storage. This includes the application of serialized barcoding for precise item tracking, proper preservation techniques to prevent corrosion and damage, and containerization that meets Defense Logistics Agency requirements for uniformity and durability across the supply chain. All work must adhere strictly to federal military specifications to maintain compatibility with DoD inventory and logistics systems. Issued under the NAICS code 493110 for warehousing and storage, this subcontract is solicited by the ASC Commodities Division of the Department of Defense with a response deadline of August 22, 2026. The services are intended for performance within the DoD’s logistical network, though specific performance locations are not defined. Contractors must demonstrate capability in executing military-compliant packaging processes without deviation, as noncompliance could result in rejection of shipments and disruption of operational readiness. The solicitation is publicly accessible via the DIBBS portal for qualified subcontractors seeking to support defense materiel distribution.
General Warehousing and Storage

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 335929
New
DIBBS
Cable Assembly Manufacturing and TestingThe contract encompasses the full lifecycle production of a specialized military cable assembly, requiring end-to-end execution from fabrication through final testing and delivery. All manufacturing processes must adhere to strict quality standards including ISO 9001:2015, with comprehensive quality assurance procedures applied at every stage. The deliverables must pass a formal first article inspection and comply with MIL-STD-129 for packaging and labeling, ensuring traceability and readiness for military logistics. Additionally, the contractor is required to implement and maintain robust cybersecurity controls in alignment with NIST SP 800-171 and achieve CMMC compliance, reflecting the sensitive nature of the hardware and accompanying data. Production activities are expected to occur under the oversight of the ASC Commodities Division within the Department of Defense, though the precise performance location is not specified. The solicitation, titled Cable Assembly Manufacturing and Testing, was posted on July 23, 2026, with responses due by August 22, 2026. It is classified as a subcontract opportunity under NAICS code 335929, which pertains to other electrical equipment and component manufacturing. There is no set-aside designation or specific point of contact provided, and performance details including location remain unspecified. Contractors must be prepared to meet all technical, quality, and cybersecurity requirements without deviation, as failure to comply could result in rejection of proposals or non-performance penalties. The contract is accessible via the DIBBS portal and expects capable suppliers with proven expertise in defense-grade cable systems and certified compliance programs.
Other Communication and Energy Wire Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332991
New
DIBBS
BEARING, BALL, ANNULAThis contract is for the procurement of one ball annular bearing with NSN 3110-01-492-9749, governed by solicitation SPE4A6-26-T-09MH, with a delivery deadline of 20 days from award and FOB destination terms. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the cost of all components—rolling elements, retainer, inner race, or outer race—originating from these regions, as mandated by DFARS clause 252.225-7016. Contractors are required to submit a formal declaration affirming the domestic or foreign origin of materials, and failure to provide this documentation may disqualify their bid. The solicitation may be canceled or suspended if no compliant offers are received, pending a potential waiver under DFARS 225.7009-4. The item is designated as a critical application with a specific approved source, Johnson Controls Navy Systems, LLC, part number 064-48208C000. All supplies must adhere to stringent packaging, preservation, and marking standards including MIL-STD-2073-1E, MIL-DTL-197M, and MIL-STD-129. Preservation methods are dictated by bearing type and closure, requiring specific protective lubricants and process controls defined in MIL-DTL-197M. Packaging facilities must meet quality assurance verification criteria outlined in that standard. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise contracted, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Documentation for source approval, tooling, and casting/forging assistance must be submitted through DLA channels if applicable, and all markings and unit of issue must comply with DoD and ANSI X12 standards.
Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
TURNBUCKLEThis contract specifies the procurement of a 1/2-13 NC thread, 9-inch take-up turnbuckle with a steel zinc-coated finish, manufactured via forging process and governed by military and consensus standards, with mandatory compliance to the current revision of the defining part standard. Quality assurance is strictly controlled through MIL-STD-1916 or ASQ H1331 zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major unless otherwise dictated. All hardware must be produced in accordance with the latest revision of the applicable standard, and past production to prior revisions is not acceptable for items manufactured after the solicitation date. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must meet DLA’s procurement packaging requirements. The item is designated NSN 5340-00-924-1707, with a unit of issue as individual piece and a mandatory delivery of one unit within 20 days FOB origin. The delivery destination is Camp Humphreys, Building P6953, Pyeongtaek, South Korea, with inspection and acceptance occurring at the destination point. The contract prohibits any quantity variance and requires compliance with hazardous materials packaging and shipping protocols under IP025. The purchase request number is 7007071973, and the required delivery date is April 8, 2024. The contract is issued under solicitation SPE4A6-26-T-09KK by the Department of Defense’s ASC Commodities Division, with technical and quality requirements incorporated by reference from the DLA Master List, including forging-specific sourcing guidance for Aviation, Land & Maritime Supply Chains. All shipping and transportation procedures must follow DLAD Proc Notes C19 and C20, and the supplier is contractually bound to meet all specified conditions without deviation, as the item is critical to DoD logistics and operational readiness.
Hardware Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
INDICATOR, POSITIONThe contract pertains to the supply of three units of an Indicator, Position identified by NSN 6620-01-096-3723 and part number 1386F20G01, to be delivered FOB origin within 169 days of contract award, with no tolerance for quantity variance. Delivery is mandated to the DLA Distribution facility in New Cumberland, Pennsylvania, under packaging and marking standards compliant with MIL-STD-2073-1E and MIL-STD-129, using preservation method 10 and unit container E5. The item is classified as a commercial item without requirement for Item Unique Identification, consistent with DFARS 252.211-7003(c)(1)(i). Strict prohibitions are in place against the intentional inclusion of mercury or mercury compounds in the product or its packaging, with limited exceptions for specific functional uses such as batteries or instruments, which must include secondary containment and meet NAVSEA 5100-003D specifications. Mercury is explicitly banned in preservation, packaging, and marking processes. Technical and quality requirements referenced from the DLA Master List govern this procurement, and all documentation must comply with Source Approval Request procedures. The contract was solicited under SPE4A6-26-T-09KY, with a response deadline of July 31, 2026, and delivery required no later than February 17, 2028, though the need ship date is set for January 17, 2027. The ordering activity is the ASC Commodities Division under the Department of Defense, with Tracy Fletcher as the primary point of contact.
Other Engine Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 326122
New
DIBBS
CLAMP, HOSEThe contract is for the procurement of 50 units of CLAMP, HOSE with NSN and part number 4730-01-579-0306 under solicitation SPE4A6-26-T-093C, issued by the ASC Commodities Division of the Department of Defense. The requirement mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment, specifically addressing Physical Identification or Bare Item Marking, with no existing data provided, necessitating the alternate offeror to submit a complete data package including details for both the approved and alternate parts. The purchase request number is 7014555103 and delivery is required within 20 days after delivery order issuance. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and falls under NAICS code 326122 for rubber products manufacturing. The point of contact is Tabitha Jackson, reachable via email and phone, and the contract is classified as a federal solicitation with no set-aside designation.
Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, ELThis contract pertains to the procurement of electrical insulation sleeving, identified by NSN 5970-01-020-3420, with a quantity of 210 units to be delivered within 74 days under solicitation SPE4A6-26-U-3287. The item is classified as a critical application item and must comply with rigorous technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, incorporating MIL-STD-1916 or ASQ H1331 sampling protocols with zero non-conformances required for acceptance unless otherwise stated. All supplies must be free from intentional addition of mercury or mercury-containing compounds, except for specific exempted applications such as functional components in batteries, fluorescent lamps, sensors, weapons systems, or chemical reagents specified by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment per NAVSEA 5100-003D. The product must be furnished by authorized suppliers including TE Connectivity Corporation, HellermannTyton, Tyco Electronics France SAS, and MBDA UK Ltd, each identified by their respective CAGE codes and part numbers. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, with materials procured in one continuous length on reels or spools, marked in accordance with MIL-STD-129. Delivery is FOB origin with no variance permitted in quantity, and inspection and acceptance occur at destination. The unit of issue is each, and special marking is not required. The contract is issued under DLA Direct, CONUS coverage with an estimated purchase volume, and the point of contact is Kymberley Ferguson of the Department of Defense, ASC Commodities Division.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEARThe contract solicitation SPE4A6-26-T-06TX is for the procurement of 98.4 hundreds of BOLT, SHEAR with National Stock Number 5306-01-436-1471 under a Total Small Business Set-Aside, with performance required at Tinker AFB, Oklahoma. Delivery must occur within 110 days of award, with FOB Origin terms meaning inspection and acceptance occur at the contractor’s facility. The product must comply with the DLA Master List of Technical and Quality Requirements, which supersede general industry standards like ASTM D3951, and packaging and labeling must adhere to MIL-STD-129, including NSN, CLIN, lot number, quantity per unit pack, and unit of issue markings. Technical data associated with the item is subject to export control under ITAR or EAR, restricting disclosure to foreign nationals and requiring contractors to hold approved US/Canada Joint Certification Program certification, complete mandatory DLA export control training, and be authorized by DLA to access controlled information. Cybersecurity compliance at CMMC Level 2 is mandated, requiring either a self-assessment or certification by a C3PAO, along with adherence to safeguarding requirements for Covered Defense Information as outlined in DFARS 252.204-7012 and NIST SP 800-171. The contractor must implement a quality system compliant with SAE AS9003 or ISO 9001 tailored to SAE AS9003, and all non-accepted items must have government identification removed prior to return. Item Unique Identification is not required per service customer direction. The contract includes multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, hazardous materials, whistleblower rights, cyber incident reporting, prohibiting covered telecommunications equipment, sustainable products, and payment through WAWF. The offeror must be a small business with a valid Unique Entity ID and must complete socioeconomic representations including WOSB, EDWOSB, SDVOSB, HUBZone, and SDB statuses if applicable, and disclose all joint venture participants. No pricing details are provided in the solicitation, and contract type is pending formal insertion under FAR 52.216-1, though FFP is likely given the simplified acquisition context. All proposals must be submitted electronically via DIBBS by the deadline of July 28, 202
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details