Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

WIRING HARNESS

Awarded
SPE4A5-26-T-4282Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Defense Logistics Agency awarded Contract SPE4A526V0437 to INTERCONNECT WIRING LLP, with a CAGE code of 0WW63, for the supply of a wiring harness identified by NSN 5995016803780, at a total contract value of $38,052.00. The award was issued on July 17, 2026, under Solicitation SPE4A5-26-T-4282, with a modification number P00001, and the place of performance is tied to the contractor’s location at 5024 W Vickery Blvd, Fort Worth, TX. The contract falls under NAICS code 335931, which classifies it as Wiring Harness Manufacturing, and no set-aside designation is specified. The only explicitly incorporated Federal Acquisition Regulation clause is FAR 52.222-90, Addressing DEI Discrimination by Federal Contractors, implemented through DoD Class Deviation 2026-00040, Revision 1, which mandates prohibitions against race-based stereotyping or discrimination in employment and subcontracting practices, requires reporting of subcontractor violations and legal challenges, and obligates flow-down of the clause to all U.S.-based subcontracts. Compliance with this clause is deemed material to payment. No other contract clauses, packaging or labeling standards, inspection criteria, delivery schedules, FOB terms, or payment details are specified in the available documentation. The contractor is required to provide records and reports upon request, and while the award notice references Standard Form 30 and indicates submission was directed to DLA Aviation at the Richmond, VA address, no formal evaluation factors, line-item pricing breakdowns, accounting data, invoicing methods, or point of contact information for a contracting officer’s representative are provided. The contract does not reference any military standards such as MIL-STD-129 or MIL-STD-2073, nor are there details on delivery timing, options, or technical specifications beyond the NSN.

General Info

INTERCONNECT WIRING LLP awarded $38,052 for NSN 5995016803780 wiring harness on July 17, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$38,052

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

INTERCONNECT WIRING LLPView Profile

Award Issued Date

Documents

(1)

SPE4A526V0437_P00001.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → Defense Logistics Agency
View Agency Profile
Office AddressUS

Full Description

Show more
DLA award SPE4A526V0437 posted on DIBBS. Awardee: INTERCONNECT WIRING LLP (CAGE 0WW63) Total Contract Price: $38,052.00 Award Date: 07-17-2026 Solicitation: SPE4A5-26-T-4282 Line items: - WIRING HARNESS (NSN/Part 5995016803780, PR 7014628924)

Similar Contracts

Same NAICS industry code

NAICS: 335931
New
DIBBS
TERMINAL, LUG
Solicitation # SPE4A7-26-T-606A
This contract specifies the procurement of five terminal lugs with NSN 5940-01-008-6727 under solicitation SPE4A7-26-T-606A, which is a total small business set-aside with a NAICS code of 335931. Delivery is required within 20 days after award, and responses must be submitted by August 10, 2026. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. All items require physical identification or bare part marking in accordance with specified guidelines. Sampling and inspection follow MIL-STD-1916 or an approved zero-based equivalent, with verification levels and AQLs assigned based on attribute criticality unless otherwise stated. Zero non-conformances are required for acceptance unless the contract specifies otherwise. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location. Access is limited to contractors with approved JCP certification, completed DOD training, and formal DLA authorization. DFARS 252.225-7048 applies, and covered defense information is protected under RD003. The contracting office is the Department of Defense, specifically ASC Supplier Operations AE and AF Division, with Jessica Gentry as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EB
This contract pertains to the procurement of five radio frequency cable assemblies under solicitation SPE4A6-26-T-11EB, with a total value of $25.00 and a delivery deadline of 20 days after order receipt, targeting delivery to Naval Station Newport, Rhode Island. The items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and are governed by MIL-STD-1916 or ASQ H1331 for sampling inspection, requiring zero non-conformances in the sample lot unless otherwise specified. Critical, major, and minor attributes must be verified at corresponding verification levels or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required and palletization following DLA packaging requirements. The contract explicitly prohibits mercury or mercury compounds in preservation, packaging, packing, and marking, with narrow exceptions for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or NAVSEA-specified reagents, which must also be shock-proof and equipped with a secondary containment boundary. Deliveries are FOB origin, inspected and accepted at destination, and invoicing must be processed through Wide Area WorkFlow (WAWF). All contractors must submit safety data sheets for hazardous materials and comply with the Hazard Communication Standard, while also affirming their small business status and providing UEI and CAGE codes as required. Clauses on combating trafficking, employment eligibility, sustainable products, safeguarding information systems, changes, subcontracting, inspection, and default are incorporated, with deviations applied to several FAR clauses effective February 2026. Proposals must be submitted electronically via DIBBS by August 10, 2026, and the contract is administered by the ASC Commodities Division of the Department of Defense, with Ernest Penrose as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EA
This contract pertains to the procurement of a cable assembly identified as RADI with NSN 5995-01-722-6071 and part number MINIBEND LR-41.00 manufactured by HUBER+SUHNER ASTROLAB, INC. A total of five units are required with a unit price of $5.00, resulting in a total contract value of $25.00, to be delivered within 20 days to the Naval Undersea Warfare Center Division Newport in Rhode Island. Delivery is FOB origin and inspection and acceptance occur at the destination. The item is classified as a commercial off-the-shelf (COTS) product and a critical application item, subject to specific quality and technical requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Strict packaging regulations apply, requiring compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes needed. Packaging must adhere to DLA requirements, prohibiting any mercury or mercury-containing compounds in preservation, packaging, or labeling, in alignment with NAVSEA 5100-003D, except for specific functional uses in batteries, sensors, or instrumentation. Parcel post is prohibited; shipping must occur via traceable means. The item is not subject to Item Unique Identification per customer request, and all documentation must follow source approval and removal of government identification protocols where applicable. The contract references precise unit of issue standards and requires delivery by July 23, 2026, with procurement governed under solicitation SPE4A6-26-T-11EA and governed by the Department of Defense through the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CONNECTOR, PLUG, ELEC
Solicitation # SPE7M5-26-T-364Q
The contract specifies the procurement of an electrical plug connector under NSN 5935015400279, with a total quantity of 48 units at a unit price of $48.000, resulting in a total contract value of $48.000. The items must be delivered FOB origin with an 81-day delivery timeline, and the final destination is the DLA Distribution facility in New Cumberland, Pennsylvania. Compliance with DLA's Master List of Technical and Quality Requirements is mandatory, superseding other standards such as ASTM D3951, and packaging must adhere to RP001 for palletization and MIL-STD-129 for labeling and marking. Non-hazardous items must be commercially packaged per ASTM D3951, while hazardous materials, if any, must conform to TQ requirement IP025 as defined by FED-STD-313. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 using zero-based acceptance criteria, with attributes classified into critical, major, and minor levels corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at the destination point, and all invoicing must be processed electronically via Wide Area Workflow (WAWF). Contractual obligations include adherence to FAR and DFARS clauses covering labor standards, human trafficking prevention, employment eligibility verification, sustainable procurement, cybersecurity safeguarding, hazardous material identification, export control, and prohibitions on covered telecommunications equipment and hexavalent chromium. The contractor must provide a Unique Entity Identifier and CAGE code, affirm small business status if applicable, and comply with all socioeconomic representations. The solicitation requires electronic submission through DIBBS by August 13, 2026, and the contract is governed under the NAICS code 335931 for other electrical equipment and component manufacturing.
ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARD
Solicitation # SPE4A7-26-T-605N
The contract specifies the procurement of a Terminal Board identified by NSN 5940-01-128-2240 and part number ST5M1379-006A, with an approved quantity of 148 units at a unit price of $148.00, resulting in a total contract value of $21,904. The item is classified as a critical application component, with approved suppliers including The Boeing Company, Trico Manufacturing Inc., RMB Miniature Bearings Inc., and Stroco Manufacturing Inc. Deliveries are required FOB origin, with inspection and acceptance occurring at the destination, and all units must be delivered within 154 days of contract award, with the original required delivery date set for January 12, 2027. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-129 and ASTM D3951, with DLA requirements taking precedence. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and zero non-conformances required unless otherwise stated. All packaging and palletization must comply with DLA’s RP001 requirements, and items must be marked in compliance with RQ017 for physical identification. The sole delivery address is DLA Distribution Cherry Point in North Carolina, and transportation procedures must follow DLAD Proc Notes C19 and C20. The contract includes mandatory documentation for source approval, removal of government identifiers from non-accepted items, and all requirements are governed by the DLA Master List revision in effect on the solicitation date.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11EC
This contract pertains to the procurement of five units of a commercial off-the-shelf cable assembly identified by NSN 5995-01-722-3415 and part number MINIBEND LR-49.00 from HUBER+SÜHNER ASTROLAB, INC., with a firm delivery requirement of 20 days from the order date. The item is designated as a critical application COTS product, and strict compliance with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 is mandated, including specific preservation, packaging, and marking procedures. Mercury and mercury-containing compounds are explicitly prohibited in the product itself and in all associated preservation, packaging, and marking materials, with limited exceptions only for functional uses in specified equipment such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, and portable devices must feature shockproof construction with a secondary containment. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Goods must be shipped via traceable freight methods to the designated naval station address in Newport, Rhode Island, excluding parcel post. All technical and quality requirements referenced by R or I numbers are governed by the current DLA Master List, with revisions tied to solicitation or award dates depending on acquisition size. Shipping documentation must include required markings and packaging codes, and the contract is issued under solicitation SPE4A6-26-T-11EC with an original required delivery date of July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11DZ
This contract specifies a single unit of a special-purpose cable assembly with the NSN 5995-01-690-7485, to be delivered within 20 days of award under solicitation SPE4A6-26-T-11DZ. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlling based on the type of acquisition and applicable dates. Packaging must comply with DLA standards, and the item is subject to strict handling protocols including the removal of government identification from rejected supplies and mandatory bare item marking. Sampling and inspection follow MIL-STD-1916 or an approved zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively unless otherwise stated. The contractor must comply with Cybersecurity Maturity Model Certification Level 2 requirements, either through self-assessment or certification by a third-party assessment organization. The item must be free from intentional mercury or mercury compounds, with limited exceptions for specific functional components that must meet containment and safety standards per NAVSEA 5100-003D. Technical data associated with this item is controlled under ITAR or EAR regulations, restricting export and disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to DLA contractors with approved JCP certification, completed training on export-controlled data handling, and formal approval by the DLA controlling authority. The procurement is managed by the ASC Commodities Division of the Department of Defense, with delivery performance expected in Groton, Connecticut, and primary point of contact being Bradley Willis.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, PRINTED
Solicitation # SPE4A6-26-T-11FN
The contract specifies the procurement of five flexible printed cable assemblies under solicitation SPE4A6-26-T-11FN with a delivery deadline of five days after order award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issuance or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Bare items must be physically marked per RQ017. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Documentation for source approval requires adherence to RC001, and configuration changes necessitate formal engineering change proposals. Cybersecurity compliance mandates either a CMMC Level 2 self-assessment or certification by a C3PAO. The contract incorporates DFARS 252.225-7048 for export-controlled technical data, which is subject to ITAR or EAR and may not be disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of DLA export control training, and formal DLA approval. Item Unique Identification is waived per the service customer’s request under DFARS 252.211-7003(c)(1)(i). The NSN is 5995-01-667-0149, with performance occurring at Tobyhanna, PA. The point of contact is Berkeley Vaughan, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Labeling ServicesThe contract pertains to regulatory consulting services focused on hazard communication compliance, specifically requiring the preparation of warning labels and safety data sheets (SDS) that meet both OSHA and military standards. This work is critical to ensuring proper handling, storage, and disposal of hazardous materials across defense operations, with all deliverables needing to align with federal safety regulations and Department of Defense requirements. The services will support the Defense Logistics Agency in maintaining stringent compliance for hazardous materials used in military supply chains and facilities. The contract is classified as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and is issued by the Department of Defense through the Defense Logistics Agency. Performance is required at a designated location in Albany, Georgia, with a zip code of 31704-0325. The solicitation was posted on August 2, 2026, and responses must be submitted by August 13, 2026. There is no set-aside designation specified, indicating the opportunity is open to all qualified subcontractors regardless of size or status. All work must be completed in accordance with applicable federal regulations, and contractors are expected to demonstrate expertise in hazard communication standards and military-specific documentation protocols.
Other Scientific and Technical Consulting Services

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details