Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

WIRING HARNESS

Active
SPE4A6-26-T-12SPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of four wiring harnesses identified by NSN 6150-01-494-3534, with a delivery requirement of 170 days after order issuance. The solicitation number is SPE4A6-26-T-12SP, posted on August 5, 2026, with responses due by August 13, 2026. The item falls under NAICS code 334419 and is managed by the ASC Commodities Division of the Department of Defense. The place of performance is specified as Barstow, California, with Alliyah Richmond listed as the primary point of contact. The contract mandates compliance with CMMC Level 2 requirements as certified by a Third-Party Assessment Organization and permits the use of Certificate of Conformance procedures unless explicitly withheld by a Quality Assurance Letter of Instruction. The technical data associated with this wiring harness is subject to U.S. export control regulations under ITAR or EAR, prohibiting any disclosure or transfer to foreign persons regardless of location, including foreign national employees and subsidiaries. DFARS 252.225-7048 governs the handling of this data, and distribution is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to access controlled data. All handling, storage, and transmission of technical documentation must adhere strictly to these restrictions to prevent unauthorized export or disclosure.

General Info

Procure four wiring harnesses, deliver in 170 days, CMMC Level 2, ITAR-controlled, DLA-approved contractors only, Barstow, California.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

REC OFFICER 442-295-4148, BARSTOW, CA, 92311-5014, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-12SP.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Alliyah Richmond
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WIRING HARNESS
WIRING HARNESS
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 6150-01-494-3534 Quantity: 4 EA Purchase Request: 7017739582QTY: 4 Delivery: 170 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-12UF
The contract pertains to the procurement of a single unit of a branched wiring harness identified by NSN 6150-00-394-4934 under solicitation SPE4A6-26-T-12UF, with a delivery requirement of 58 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, with attributes classified as critical, major, or minor corresponding to specific verification levels or AQLs. All technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior authorization from the Department of State or Commerce. Only DLA contractors with approved US/Canada Joint Certification Program status, completed export control training, and DLA authorization may access such data. The contract is issued by the Department of Defense’s ASC Commodities Division with performance at New Cumberland, Pennsylvania, and all inquiries should be directed to the primary point of contact, Alliyah Richmond.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRANCHE
Solicitation # SPE7L1-26-T-917E
The contract is for a single unit of a branched wiring harness identified by NSN 6150-01-586-5212 and part number 3754508, issued under solicitation SPE7L1-26-T-917E to OSHKOSH DEFENSE LLC. Delivery is required within 10 days FOB origin to Fort Sill, Oklahoma, with no variance permitted in quantity. The item must be packaged in compliance with ASTM D3951 and labeled per MIL-STD-129, with palletization meeting DLA’s packaging requirements, and all packaging must adhere to the DLA Master List of Technical and Quality Requirements, which take precedence over any other standard. Sampling for quality assurance must follow MIL-STD-1916 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and acceptance requires zero non-conformances unless otherwise specified. The contractor must comply with Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and is subject to Covered Defense Information protocols under RD002. Item Unique Identification is not required per customer request. Shipment must be sent by the fastest traceable means, excluding parcel post, to the specified delivery address with the RDD 555 designation, and all markings must include the referenced mail forward and vendor details. The original required delivery date is August 3, 2026.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12SF
The contract is for a special-purpose electrical cable assembly, identified by NSN 5995015922049 and part number NF24Q100, with a total quantity of 8,881 feet to be delivered within 170 days FOB origin. The unit of issue has been changed to feet effective May 1, 2015, with a 1:12 conversion ratio, and delivery must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, materials, and marking per MIL-STD-129 without special markings. The contract allows for a 10% variance in quantity and requires inspection and acceptance at the destination. Packaging must also adhere to DLA’s procurement requirements, including palletization guidelines, and all supplies must be physically identified per RQ017. Sampling for quality verification must follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; acceptance requires zero non-conformances unless otherwise specified. The cable assembly is designated a critical application item, and cybersecurity compliance is mandated through CMMC Level 2 self-assessment. The solicitation is a total small business set-aside under NAICS code 334419, issued by the Department of Defense’s ASC Commodities Division, with performance at Tinker AFB and point of contact Berkeley Vaughan. Technical and quality requirements are governed by the DLA Master List, and the contract is subject to covered defense information provisions as well as restrictions on removal of government identification from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
SHIELDING GASKET, EL
Solicitation # SPE7M5-26-T-368H
The contract pertains to the procurement of 16 units of a shielding gasket, part number 5999-01-686-1234, under solicitation SPE7M5-26-T-368H, with a required delivery within 20 days of award. The item must be delivered FOB origin with no tolerance for quantity variance, inspected and accepted at the destination, and packaged in strict compliance with MIL-STD-2073-1E, including specific preservation methods and packaging codes. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging requirements. Delivery is directed to the Puget Sound Naval Shipyard in Bremerton, WA, and shipment must occur via the fastest traceable means; parcel post is explicitly prohibited. The purchase request number is 7017744407, and the unit price is $16.00 per ea, totaling $256.00. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling. The contract includes detailed government-use identifiers and project codes, and the required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026. The point of contact for inquiries is Margaret Smith of the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CONTACT, ELECTRICAL
Solicitation # SPE7M0-26-T-031N
This contract is for the procurement of one electrical contact component, identified by part number 3RT2036-1AN20 and NSN 5999017312005, manufactured by SIEMENS INDUSTRY, INC. The requirement is issued under solicitation SPE7M0-26-T-031N with a firm delivery deadline of five days after award and delivery must be FOB origin. The quantity is fixed at one unit with no tolerance for variance. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129 standards, with packaging codes and methods specified including preservative method 41, dry packaging, and D3 unit container with E5 intermediate container. The item must be palletized according to DLA packaging requirements and shipped via traceable freight methods—parcel post is prohibited. The delivery and freight address is Fort Stewart, Georgia, with the same recipient for mark for instructions. A technical and quality compliance requirement is incorporated by reference from the DLA Master List, and all supplies must comply with government identification removal protocols and physical marking standards. The contract includes government-only administrative codes and indicates an original required delivery date of June 10, 2026, though no ship date is specified. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under a federal procurement framework managed by the Department of Defense and the Maritime Supply Chain ESOC.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, POWER, E
Solicitation # SPE4A6-26-T-12SQ
The contract is for the procurement of a branched power electrical cable assembly, identified by NSN 6150200018627 and part number CA315025-01, with a mandatory quantity of eight units. Delivery is required within 170 days from contract award, with FOB origin terms, and no variance in quantity is permitted. Inspection and acceptance both occur at the manufacturer’s origin, governed by strict quality standards including MIL-STD-1916 or ASQ Z1.4 sampling methods with zero non-conformances required unless otherwise directed. Attributes are classified with verification levels VII, IV, and II for critical, major, and minor items respectively, or corresponding AQLs of 0.1, 1.0, and 4.0. All items must be marked per MIL-STD-129 with no special marking required, and packaged in strict compliance with MIL-STD-2073-1E and DLA packaging requirements. The product is designated as a critical application item. Documentation and technical requirements referenced are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Packaging and labeling must include appropriate government identification until acceptance, and any rejected items must have government markings removed prior to return. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation details governed by DLAD procedural notes C19 and C20, and the original required delivery date is May 21, 2027.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12SV
The contract specifies the procurement of a CAT5E-RED-3FT cable assembly under NSN 5995-01-605-6815, with a quantity of 10 units to be delivered within 20 days to Fort Campbell, Kentucky. All supplies must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. The product must be shipped via traceable means, excluding parcel post, and delivered FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at the destination, and the manufacturer must adhere to zero-defect sampling protocols using MIL-STD-1916 or an equivalent zero-based plan; unspecified attributes are treated as major with an AQL of 1.0. The supplier is required to meet Cybersecurity Maturity Model Certification Level 2 self-assessment criteria and must remove government identification from non-accepted items. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions aligned to the solicitation or award date. The unit of issue is each, priced at $10.00, totaling $100.00, and the contract is issued under SPE4A6-26-T-12SV with a required delivery date of July 29, 2026.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE7L5-26-T-4761
The contract pertains to the procurement of a wiring harness, branded as BRAN, under solicitation SPE7L5-26-T-4761, with a total quantity of 8 units at a unit price of $8.00, resulting in a total price of $64.00. The National Stock Number is 6150-01-565-2563, and delivery is required within 56 days to the DLA Distribution Facility in New Cumberland, Pennsylvania, with FOB origin terms. The quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be labeled and palletized accordingly. The item is subject to CMMC Level 2 Self-Assessment for cybersecurity compliance and must be delivered without government identification if rejected. The contract specifies a zero variance limit on quantity and requires inspection and acceptance at the destination. The need ship date is October 13, 2026, with an original required delivery date of November 27, 2026. Point of contact for the contract is Bradley Evans, with email and phone provided for procurement inquiries. The NAICS code is 334419, and the procuring agency is the Department of Defense under Land Supplier Operations Engines.
LAND SUPPLIER OPNS ENGINES

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-5707
The contract is for the procurement of a single push switch with NSN 5930011164469 and part number PTM33E from SENASYS, INC, under solicitation SPE7M8-26-T-5707. Delivery is required within 20 days FOB destination with no quantity variance allowed, and inspection and acceptance occur at the delivery point. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-DTL-28786 for switches, with packaging and marking strictly following MIL-STD-129 and no special marking required. Mercury or mercury-containing compounds are prohibited unless part of functional components like batteries, fluorescent lamps, sensors, or weapons systems as specified by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The shipment must be sent via traceable means to the vessel USS CARTER HALL LSD 50 at FPO AE 09573 using RDD 777 and the transport control number V218806210EE15; parcel post is strictly forbidden. The required delivery date is August 3, 2026, and the contract is subject to the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The solicitation closes on August 17, 2026, and is managed by the Department of Defense’s Electrical Devices Division.
ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-12SS
This contract is for the procurement of five special-purpose electrical cable assemblies identified by NSN 6150015065250 and manufacturer part number 00805 from TRU-HITCH, INC. The items must be delivered in full compliance with strict military packaging standards, specifically MIL-STD-2073-1E and DLA packaging requirements, and marked in accordance with MIL-STD-129 without special markings. Delivery is FOB origin with zero tolerance for quantity variance and inspection and acceptance occurring at the destination warehouse in Tracy, California. The required delivery date is 170 days after award, with a need ship date of January 31, 2027 and original delivery deadline of February 24, 2027. Quality assurance follows zero-defect sampling protocols under MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates technical and quality requirements referenced from the DLA Master List and mandates CMMC Level 2 self-assessment for cybersecurity compliance. All supplies must be physically identified per RQ017, and government identification must be removed from non-accepted items. The unit price is $5.00 per item for a total contract value of $25.00, and transportation details align with DLA procedural notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-12SU
This contract pertains to the procurement of a cable assembly with NSN 6150015511266, designated as a critical application item under solicitation SPE4A6-26-T-12SU, issued by the Defense Logistics Agency. The item must be delivered in a single unit to the USS Dwight D. Eisenhower, with delivery required within 20 days of contract award and FOB origin terms. All packaging, preservation, and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization compliant with DLA’s packaging requirements, and mercury or mercury compounds are explicitly prohibited in any phase of preservation, packaging, or marking. Sampling and inspection follow MIL-STD-1916 or an equivalent zero-based plan, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their classification. Cybersecurity requirements mandate CMMC Level 2 self-assessment compliance, and government identification must be removed from non-accepted supplies. The item must be shipped via the fastest traceable means, with parcel post strictly forbidden, and all documentation must align with DLA’s technical and quality standards referenced from their master list. Delivery is targeted for July 2026, with two separate CLINs corresponding to this item under separate purchase request lines, each requiring identical compliance with all specs, packaging, and shipping conditions.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS, BRAN
Solicitation # SPE4A6-26-T-12SL
The contract is for the procurement of a branched wiring harness, identified by NSN 5995-01-553-4037 and part number 8EH65DAA1 from AMETEK INC, with a quantity of three units. Delivery is required within 170 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is classified as a critical application item, subject to stringent quality and documentation controls, including compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements. Sampling must follow MIL-STD-1916 or an equivalent zero-based plan, with critical attributes held to a verification level of VII or AQL of 0.1, and unspecified attributes treated as major unless otherwise defined. The contract enforces cybersecurity compliance through CMMC Level 2 self-assessment and requires adherence to DLA’s master list of technical and quality requirements incorporated by reference. No unique item identification is mandated, as specified by the service customer. The unit of issue is each (EA), with zero tolerance for quantity variance. Deliveries must be sent to the DLA distribution facility in New Cumberland, Pennsylvania, with a need ship date of January 31, 2027, and original required delivery date of February 10, 2028. All documentation, including source approval requests, must meet RC001 and other referenced standards, and transportation logistics are governed by DLAD procedures C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334332
New
DIBBS
Military-Grade Cable Assembly Manufacturing and Supply

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, AIRFRAME
Solicitation # SPE4A6-26-R-XC13
The contract is for one roller bearing, airframe model DAS6-25C, identified by NSN 3110-00-143-3010, under solicitation SPE4A6-26-R-XC13. The item is classified as a critical application component and must be manufactured entirely in the United States, its outlying areas, or Canada, with over 50% of the total cost of all bearing components—rolling elements, retainer, inner race, and outer race—originating from these regions. A signed contractor’s declaration confirming the domestic origin of materials is required and must be submitted upon request; failure to provide this will disqualify the quote. The solicitation is subject to cancellation if no compliant offers are received, with potential reinstatement only after a formal waiver is approved. Pricing is firm fixed, with no variance allowed in quantity, and delivery is due 177 days after award. Inspection and acceptance occur at destination, with FOB terms also at destination. Packaging and preservation must follow MIL-STD-2073-1E, MIL-DTL-197M, and all DLA packaging requirements, including specific preservation methods determined by bearing type and closure, approved lubricants, and stringent quality verification controls. Marking must comply with MIL-STD-129 using special marking code ZZ-ZZ and no government identification may be removed from non-accepted supplies. Unit of issue is each, and no item unique identification is required per the service customer’s request. Measuring and test equipment must be calibrated and traceable, and documentation for source approval is governed by RC001. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The solicitation was issued on August 5, 2026, with responses due by August 19, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 14 days
View Details