Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

WOUND CLOSURE KIT, F

Awarded

SPE2DS-26-T-7626Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines the procurement of a single-use, sterile Wound Closure Kit designed specifically for facial lacerations treated in emergency room settings. Each 30-piece kit includes stainless steel instruments with full finger loops and various medical supplies such as gauze pads, blotting towels, fenestrated drape, forceps, scissors, needle holders, medicine cups, syringes, and multiple needles of different gauges and lengths. The kit is packaged in a compartment tray and issued in packages containing 16 kits each. The contract specifies strict requirements for packaging, shelf life, and quality control, mandating a shelf life of 60 months with no more than 9 months elapsed between manufacture and delivery to the government. It incorporates technical and quality standards as outlined by the Defense Logistics Agency (DLA) master list. Bidders must specify the source and part number of the supplied kits. The contract is managed by the Department of Defense’s Medical Supply Chain at Malmstrom Air Force Base, with a delivery timeline of 20 days after order and a response deadline for solicitation set in early 2026.

General Info

Procurement of sterile 30-piece facial wound closure kits, 60-month shelf life, DoD delivery in 20 days.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$100.25

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

SZY HOLDINGS, LLCView Profile

Award Issued Date

05/28/2026, 12:00:00 AM UTC

Documents

(2)

SPE2DS26V6071.pdf

PDF

SPE2DS-26-T-7626.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedMar 25

Solicitation

AwardedMay 28

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

Michael Small

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE2DS26V6071 posted on DIBBS. Awardee: SZY HOLDINGS, LLC (CAGE 0AG09) Total Contract Price: $100.25 Award Date: 05-28-2026 Solicitation: SPE2DS-26-T-7626 Line items: - WOUND CLOSURE KIT, F (NSN/Part 6515015890946, PR 7016047787)

Similar Contracts

Same NAICS industry code

Supplier of Plastic Ostomy Loop Bridges

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

6515--Chiropractic Tables

Solicitation # 36C25926Q0811

Solicitation number 36C25926Q0811, issued by the Department of Veterans Affairs Network Contract Office 19, seeks the delivery of two chiropractic tables for the VA SLC Utah Health Care System located in Salt Lake City, Utah. This combined requirement is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 339113. The primary point of contact for this procurement is Contract Specialist Charles Morton. The solicitation process includes a deadline for questions on September 4, 2026, with final quotes due by September 14, 2026, at 4:00 PM. Performance of the contract is subject to the guidelines of Wage Determination No. 2015-5489, Revision 27, which governs labor standards and wage rates for service contract work within Salt Lake and Tooele counties in Utah.

Network Contract Office 19 (36C259)

POSTED

about 19 hours ago

DEADLINE

STERIS InnoWave Irrigator

Solicitation # 36C24126Q0765

The Department of Veterans Affairs, through the Network Contracting Office 01, is soliciting quotes for the procurement of one STERIS InnoWave PCF Sonic Irrigator for the Sterile Processing Services Department at the Manchester VA Medical Center in New Hampshire. This combined synopsis and solicitation is a small business set-aside under NAICS code 339113. The requirement is justified as a single-source procurement from Steris Corporation due to compatibility with existing workflows and infrastructure, though the equipment may be acquired through small business distributors. The scope of work includes the delivery, installation, and operational verification of the unit, as well as the deinstallation and disposal of the existing inoperable ultrasonic cleaner and all associated packaging materials. The contractor must provide onsite operational training for staff covering maintenance, safety, and troubleshooting. Delivery is required no later than 45 days after receipt of order, with full installation and verification completed within 90 calendar days of the award. Award decisions will be based on price, past performance, and speed of delivery. Interested offerors must submit their quotes by September 21, 2026, including their Unique Entity Identifier and a statement of agreement with the solicitation terms. All services and equipment must be delivered and accepted at the Manchester VA Medical Center.

241-NETWORK Contract Office 01 (36C241)

POSTED

about 19 hours ago

DEADLINE

Supply of Medical Kit Components (Hydrogel and Gauze)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Sterile Combat Eye Shield Kits

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Nasal Oxygen Cannulas (NSN 6515-01-552-1481)

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720014715008)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of CSF Drainage Collection Bags

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Supply of Surgical Drain Valves

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

TCCC Casualty Simulation Trainer Production

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Sternal Intraosseous Puck Production

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Sterile Surgical Sponge Supplier

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 14 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 14 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 14 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

Solicitation SPE7L7-26-Q-2372 is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for two uninterruptible power supplies, identified by NSN 6130-01-673-0176 and Motorola Solutions part number DSGXT4-1000RT120. The items are designated as critical application items with a 12-month extendable shelf life. Delivery is required within 60 days after order to the USS MARINETTE (LCS 25). Award will be based on the best value to the government, evaluating price, offered delivery, and past performance. The contract mandates strict adherence to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Because the items involve sealed lead acid batteries, the contractor must provide Material Safety Data Sheets per FED-STD-313 and comply with hazardous material shipping regulations under IP025. Quality assurance requires sampling according to MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in the sample lot. Additionally, the contractor must complete a CMMC Level 2 self-assessment and utilize the Wide Area WorkFlow system for all invoicing and receiving reports. Inspection and acceptance will occur at the point of origin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 14 hours ago

DEADLINE

Supply of Storage Batteries (NSN 6140-01-713-7559)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS