Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

WRENCH, COMBINATION, SPE

Active
SPE4A5-26-T-301CFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for nine combination torque wrenches of a special purpose design, solicited under SPE4A5-26-T-301C with a response deadline of July 29, 2026, and a delivery schedule of 171 days after order. The item is identified by NSN 5120-01-696-2214 and is procured by the Department of Defense, specifically the ASC Supplier Operations OEM Division, with performance required in New Cumberland, Pennsylvania. Technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Documentation for source approval must be submitted, and the item is subject to defense export-control regulations under ITAR or EAR, restricting technical data disclosure to foreign persons without authorization and requiring contractors to hold JCP certification, complete mandatory DOD export training, and receive DLA approval before accessing controlled data. DFARS clauses addressing export control and removal of government identification from non-accepted supplies apply, and while item unique identification is not required per the Service customer’s request, physical marking of the bare item is mandated. Packaging must comply with DLA procurement standards, and all communications and submissions must adhere to the designated point of contact, Rasulbek Kilichev.

General Info

Nine special-purpose torque wrenches, NSN 5120-01-696-2214, for DoD, delivery in 171 days, ITAR/EAR controlled, JCP certification required.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUS
Contacts
Rasulbek Kilichev
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
WRENCH,COMBINATION,SPECIAL PURPOSE
WRENCH,TORQUE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5120-01-696-2214 Quantity: 9 EA Purchase Request: 7017572798QTY: 9 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract specifies the procurement of a light indicator component with NSN 6210011737858 under solicitation SPE4A6-26-T-08UD, requiring delivery of three units at one each to the USS FRANK E PETERSEN JR DDG 121 at FPO AP 96691 by June 25, 2026, with a 20-day delivery window and FOB destination terms. Strict compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129 is mandated, including fragile labeling and prohibition of mercury or mercury compounds in preservation, packaging, or marking. The item is classified as a critical application with bare part marking requirements for DRS NAVAL POWER SYSTEMS INC P/N 6981ED166-535, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revisions controlled by the solicitation or amendment date. No shelf life applies, and quantity variance is strictly zero percent. Shipping and transportation follow DLAD procedural notes C19 and C20, with vendors required to use VSM for logistics. The contract enforces zero tolerance for mercury exposure and mandates compliance with verified sampling levels and packaging codes for unit containment and protection.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract pertains to the procurement of a light indicator switch, identified by NSN 6210014688520 and part number M22885/80-HECR, conforming to military specification MIL-PRF-22885K and MIL-PRF-22885/80J. It is classified as a critical application item and requires compliance with the DLA Master List of Technical and Quality Requirements, with all referenced technical and quality standards incorporated by reference. Mercury or mercury-containing compounds are strictly prohibited in the product except for specified functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical analysis reagents as defined by NAVSEA, and any portable items containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. The item must be listed on the Qualified Products List or Qualified Manufacturers List, as it is designated as a primary QPL/QML item. The contract calls for 14 units to be delivered FOB origin within 171 days from the required delivery date of March 15, 2027, with no variance permitted in quantity. Packaging and preservation must follow MIL-STD-2073-1E and MIL-DTL-28786 for switches, with marking compliant to MIL-STD-129 and no special marking codes. Hazardous materials shipping procedures must adhere to IP025 guidelines, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The unit of issue is each (EA) at a unit price of $14.00, totaling a contract value of $196.00. The solicitation was issued on July 21, 2026, with a response deadline of July 29, 2026, under the NAICS code 334419, and is managed by the Department of Defense’s ASC Commodities Division with Gloria Frimpong as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECA specialized electrical cable assembly designated P/N T00387-5083 with NSN 6150015891293 is being procured under contract SPE4A6-26-T-08TY for a quantity of 15 units, to be delivered FOB origin within 103 days from the contract date, with no tolerance for variance in quantity. The item is classified as a critical application item and must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA packaging requirements, with all items marked in accordance with physical identification standards, and all documentation subject to cybersecurity maturity model certification level 2 self-assessment. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively. Delivery is to be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with the original required ship date set for November 10, 2026. The contract includes full compliance with DLA procurement policies for documentation, source approval, government identification removal, and transportation protocols.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThis contract is for the procurement of a specialized cable assembly with part number 5859440-31 and NSN 6150012583722, under solicitation SPE4A6-26-T-08LT, issued by the Department of Defense’s ASC Commodities Division. The requirement calls for 17 units to be delivered FOB origin within 171 days, with a fixed unit price of $17.00 and no variance allowed in quantity. The cable assembly must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, and configuration changes must follow formal Engineering Change Proposal procedures. Sampling and inspection are governed by MIL-STD-1916 or equivalent zero-based methods, with verification levels assigned based on attribute criticality, and acceptance requires zero non-conformances unless otherwise stated. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with all marking, labeling, and palletization following DLA-specific requirements. The contract explicitly prohibits mercury or mercury-containing compounds in the product, preservation, packaging, and marking, with limited exceptions for functional uses in batteries, lighting, sensors, weapon systems, or specified reagents. Additionally, portable mercury-containing devices must include shock-proof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Cybersecurity compliance is required at CMMC Level 2 through a self-assessment, and physical identification of bare items must be performed per RQ017. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract also mandates full alignment with DLA packaging, unit of issue, and eProcurement standards, with all documentation referencing the DLA website for the latest revisions as of the solicitation or award date.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADIO FThe contract pertains to the procurement of a radio frequency cable assembly identified by NSN 5995-01-501-7456 and part number AE12002, with a quantity of three units to be delivered within 188 days from the contract date. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 respectively, under DLA packaging standards, with no special marking required. The item is classified as a critical application item requiring strict adherence to technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which are incorporated by reference. Sampling of the delivered goods must follow MIL-STD-1916 or ASQ H1331 Table 1 using zero defect acceptance unless otherwise directed, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The contractor must also meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and remove any government identification from non-accepted supplies. The delivery destination is the DLA Distribution Center in New Cumberland, Pennsylvania, and transportation logistics must align with DLAD procedural notes C19 and C20. The solicitation was issued under contract number SPE4A6-26-T-08DX with a response deadline of July 29, 2026, and the item falls under NAICS code 334419.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECThe contract pertains to the procurement of five cable assemblies, identified by NSN 6150-01-258-3703, under solicitation SPE4A6-26-T-08CX, with a delivery requirement of 171 days after award. The item is subject to stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must comply with all applicable standards including MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances mandated unless otherwise stated. Configuration control requires formal engineering change proposals, and any variance requests must be formally submitted. The assembly is classified as covered defense information, triggering cybersecurity compliance under CMMC Level 2, and must be produced by a certified third-party assessment organization. Physical marking and packaging must adhere to DLA packaging requirements and item identification standards. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, meaning any disclosure to foreign persons, including foreign employees or subsidiaries, requires prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to this technical data is strictly limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by DLA. The contract's performance location is Tracy, California, with Jessica Fuentes-OSSIO as the primary point of contact. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, under a federal procurement mechanism for a non-set-aside acquisition classified under NAICS code 334419.
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThis contract governs the procurement of a SWITCH,PUSH item identified by NSN 5930-01-415-3717 and part number 10648RA10-34 from DUCOMMUN LABARGE TECHNOLOGIES, INC, with a firm fixed price of $3.00 per unit for a total of three units. Delivery is required within 81 days of contract award, shipped FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservative methods, container types, and marking per MIL-STD-129 with no special markings required. The item is classified as a critical application item, and mercury or mercury compounds are strictly prohibited unless specifically exempted for functional uses such as batteries or sensors, with additional containment requirements for any permitted mercury-containing devices per NAVSEA 5100-003D. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the contractor must adhere to DLA packaging and defense information handling protocols. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping must follow DLAD procedural notes C19 and C20. The original required delivery date was January 12, 2026, with a need ship date of March 3, 2026, under solicitation SPE7M8-26-T-5463, with responses due by August 3, 2026.
ELECTRICAL DEVICES DIV

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
SWITCH, PUSHThis contract specifies the procurement of a PUSH SWITCH with the NSN 5930-01-170-8298 and part number 621822-1, subject to strict technical and quality requirements from the DLA Master List of Technical and Quality Requirements. The item must comply with hazardous material restrictions, including a complete prohibition on intentional addition of mercury or mercury-containing compounds unless used in approved functional applications such as batteries, fluorescent lamps, sensors, weapon systems, or naval-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The switch must meet NAVAIR aircraft launch and recovery equipment traceability standards, with bare item markings required to display the contract number, NAWC CAGE 80020, and part number unless superseded by technical drawings. MIL-STD-130 and MIL-STD-129 apply for marking, and packaging must adhere to MIL-STD-2073-1E and MIL-DTL-28786 for switches. Use of Class I ozone-depleting substances is strictly prohibited in all manufacturing and processing stages without explicit written approval from the contracting officer, and this restriction overrides any conflicting specifications. The item is classified as a critical application item for use in avionics systems under the specification SPE7M2-26-T-5702, with technical data package revisions tied to reference drawings 80020 621822 and 80020 519780. The contract is a total small business set-aside with a delivery requirement of 619 days from award, FOB origin, and inspection and acceptance at destination. The order quantity is 26 units at $26.00 each, totaling $676.00. Packaging must follow the preservation and marking codes outlined, with no special marking required. Shipping and delivery are to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of April 14, 2028.
NUCLEAR REACTOR PROGRAM

POSTED

about 12 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334419
New
DIBBS
WIRING HARNESS
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY-SWIT
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, RADI
ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 336415
New
DIBBS
TAPE, DRIVE, RETICLEThe contract solicitation is for 178 units of TAPE, DRIVE, RETICLE with NSN 1430-01-318-3414, under solicitation number SPE4A5-26-T-302G, issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. The requirement is governed by a suite of technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date or award date depending on the acquisition size. The item is subject to specific packaging standards, documentation mandates for source approval, and the mandatory removal of government identification from non-accepted supplies. Physical identification and marking of the bare item are required, though Item Unique Identification is not mandated per the service customer’s instruction. Export control restrictions apply due to the presence of technical data governed by ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, including foreign nationals located in the U.S. or overseas, and requiring compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed mandatory DLA training on export-controlled data handling, and formal approval from the DLA controlling authority. Delivery is required within 171 days after award, with performance to occur in New Cumberland, Pennsylvania, 17070-5002. The solicitation closes on July 29, 2026, and the NAICS code is 336415. All correspondence and inquiries should be directed to Rasulbek Kilichev at the provided contact information.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, SLEEVEThe contract is for a spacer sleeve item with part number 741073CL13 and NSN 5365016879226, under solicitation SPE4A5-26-T-302M, requiring delivery of one unit within five days to Fort Irwin, California. The item is classified as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards MIL-STD-2073-1E and marking specifications per MIL-STD-129. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and the item must not bear government identification if not accepted. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels based on criticality. FAA airworthiness approval is mandated via CDRL RQ019, and preservation, packaging, and marking adhere to DLA and FAA-specific rules. The item must be shipped via the fastest traceable means, excluding parcel post, with delivery FOB origin and inspection and acceptance taking place at destination. The contract includes no quantity variance and specifies no unique item identification per customer request. The supplier, RTX Corporation, must meet all technical data package requirements referenced in QAP 13873, with an expiration of the contract data requirement set for January 14, 2025, and the required delivery date is July 15, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
GIMBAL AND BRACKETThe contract specifies the procurement of three Gimbals and Brackets with part number 1878032 and NSN 6605-00-089-9500 under solicitation SPE4A5-26-T-299F, with a total contract value of $9.00 and a delivery requirement of 171 days from award, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. All items must comply with MIL-STD-2073-1E for preservation and packaging, MIL-STD-129 for marking, and DLA packaging requirements, with no special marking required and no palletization beyond standard practices. Inspection and acceptance occur at the destination, with zero tolerance for quantity variance. The contract references technical and quality standards from the DLA Master List, mandates zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, and assigns verification levels of VII, IV, and II for critical, major, and minor attributes respectively. The supplier must adhere to CMMC Level 2 cybersecurity self-assessment requirements, implement configuration change management procedures, and prohibit the intentional use of mercury or mercury-containing compounds in any component, preservation, packaging, or marking, except for specific exempted applications defined by NAVSEA which must include secondary containment. Item Unique Identification is waived per DFARS 252.211-7003(c)(1)(i), and all supplies must be cleared of government identification if not accepted. The original required delivery date is March 10, 2027, with a need ship date of January 17, 2027.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
PYROMETER, INDICATINGThe contract pertains to the procurement of one indicating pyrometer, identified by NSN 6685-01-350-9216 and part number 4200-001-001, supplied by King Nutronics Corporation as a commercial off-the-shelf item. Delivery is required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with FOB origin terms and no quantity variance permitted. The item must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special markings required. Packaging and preservation must adhere to DLA requirements and explicitly prohibit the use of mercury or mercury compounds in any form during preservation, packaging, or marking, except for functional uses in specific instruments or batteries as outlined by NAVSEA. Mercury-containing portable lamps and instruments must include shockproof design and a secondary containment boundary. The supplier must provide Safety Data Sheets aligned with OSHA’s revised Hazard Communication Standard and conforming labels per 29 C.F.R. 1910.1200, and ensure employee training on these requirements. Inspection and acceptance occur at the destination, with no need for item unique identification. The contract was issued under solicitation SPE4A5-26-T-301F, with a response deadline of July 29, 2026, and a required ship date of January 17, 2027.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 325998
New
DIBBS
SCALE REMOVING COMPThe contract specifies the procurement of a scale removing compound identified by NSN 6850-12-382-7353 and commercial part number 56.00.562, supplied in container units with each container holding 100 tabs for a total of 150 tabs per container. A total of 216 containers are required to be delivered FOB destination within 144 days of contract award, with no tolerance for quantity variance. The product is classified as a commercial off-the-shelf item, and original manufacturer commercial packaging is mandatory—repackaging is prohibited. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for unique requirements, and palletization must adhere to DLA packaging standards. The supplier must provide GHS-compliant Safety Data Sheets and approved product labels, which must be reviewed and approved by technical personnel before contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs as defined. The material has no shelf life restriction. Delivery is to the DLA Distribution San Joaquin warehouse in Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 325998, with a response deadline of July 29, 2026, and an award expected under contract number SPE4A5-26-T-301W.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
GAGE, COMPOUND PRESSThis contract specifies the procurement of a GAGE, COMPOUND PRESSURE-VACUUM, DIAL INDICATOR with NSN 6685011318107 and part number SC4MC30CWRCNA, under solicitation SPE4A5-26-T-301Z, with a total quantity of 125 units to be delivered FOB origin within 219 days. The item is classified as a critical application item and must comply with technical specifications outlined in MIL-G-18997E and quality assurance procedures QAP-106. Mandatory adherence to DLA packaging requirements, MIL-STD-2073-1E preservation methods, and MIL-STD-129 marking standards is required, including special marking as a delicate instrument. Mercury and mercury compounds are strictly prohibited in all phases of manufacturing, packaging, and preservation except for specific functional uses such as batteries, lighting, or instruments approved by NAVSEA, and portable devices containing mercury must include shockproof design and secondary containment per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with no quantity variance permitted. Item Unique Identification is not required per the Service customer’s request. A separate first article test line item is included with one unit designated for testing; pricing for this line item is required, but no award will be made if the test is waived. The contract is a total small business set-aside under NAICS 334519, with delivery directed to the DLA Distribution facility in New Cumberland, Pennsylvania. The contractor must comply with all referenced technical, quality, and environmental restrictions set forth in the DLA Master List of Requirements, and transportation logistics follow DLAD Proc Note C19 and C20.
Other Measuring and Controlling Device Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
Hardware Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
WASHER, TANGThe contract is for a single washer, tang, identified by NSN 5310-00-089-4828, under solicitation SPE4A5-26-T-301L, with a required delivery within 20 days after award. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date based on acquisition size. Packaging must comply with DLA standards, non-accepted supplies must have government identification removed, and bare items must be physically marked as required. Sampling inspection follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances mandated unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All unspecified attributes are treated as major. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is to be delivered to JBPHH, HI, 96853-1801. The contracting office is the ASC Supplier Oper OEM Division under the Department of Defense, with Anthony Nickens listed as the primary point of contact.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FITTING, BREAKAWAYThe contract pertains to the procurement of 12 units of a breakaway fitting identified by NSN 1560-01-148-1719 under solicitation SPE4A5-26-T-299Y, with a delivery deadline of 171 days after award. The acquisition is structured as a total small business set-aside under NAICS code 336413, managed by the Department of Defense through the ASC Supplier Operations OEM Division. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or award date for simplified acquisitions. Packaging must comply with DLA standards, and government identification must be removed from non-accepted supplies. Physical identification of the bare item is required, but item unique identification is explicitly not required per the service customer’s directive. Measuring and test equipment must meet specified standards, and documentation for source approval is mandatory. The place of performance is New Cumberland, Pennsylvania, with Kirstie Ragsdale as the primary point of contact. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332721
New
DIBBS
STATOR ASSEMBLYThe contract pertains to the procurement of 102 units of a stator assembly identified by NSN 1630-01-320-6510 and part number 59002936-001 manufactured by Honeywell International Inc. The item is designated as a Critical Safety Item and a Critical Application Item, triggering stringent inspection requirements including 100% verification of critical characteristics such as dimensional tolerances of .001 inch or less, surface finishes of 16 RMS or finer, geometric tolerances of .002 inch or less, Class 3 or higher threads, angular tolerances of 1 degree or tighter, hardness, material certifications, dynamic and static balancing, special processes like welding and plating, heat treatment, and more. All items must be marked in compliance with MIL-STD-129, including contractor and actual manufacturer CAGE codes, part number, lot, and serial number if available, with no unit identification required per the service customer’s request. The contract mandates adherence to SAE AS9100 quality standards and requires a CMMC Level 2 Self-Assessment for cybersecurity compliance. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances expected unless otherwise specified, and all documentation must satisfy DLA’s packaging and procurement requirements under RP001 and MIL-STD-2073-1E. The item is classified as a commercial item with no shelf life and is subject to a firm fixed price with no variance permitted in quantity. Inspection and acceptance occur at origin, with delivery due 620 days after award, shipped to DLA Distribution in San Diego under FOB origin terms. Waivers or deviations require explicit approval from the DSC Contracting Officer.
Precision Turned Product Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334513
New
DIBBS
INDICATOR, RATE OF FThe contract pertains to the procurement of one unit of an indicator with a rate of flow, identified by part number FT-32AEYS-LEAS4072 and NSN 6680015378621, issued under solicitation SPE4A5-26-T-298N. Delivery is required within 171 days from the contract date, with a required delivery date of November 28, 2026, and a need ship date of January 17, 2027. The item must be delivered FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and marking strictly following these guidelines. Sampling and verification follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and critical attributes are defined with verification levels or AQLs as mandated. The product is classified as a Critical Application Item and must have all government identification removed if non-accepted, with bare item marking as required by RQ017. Covered Defense Information applies, and all documentation must align with referenced DLA directives. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
WEIGHT, WHEEL BALANCThe contract pertains to the procurement of Wheel Balancing Weights, identified by NSN 1630-01-281-8724 and part number 2609689 from Honeywell International Inc., with a quantity of 265 units. It is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List revision in effect on the solicitation issue date, and all inspections must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified. Critical attributes are subject to verification level VII, major to IV, and minor to II, with AQLs of 0.1, 1.0, and 4.0 respectively. The item is designated as a critical application item, and though Unique Item Identification is not required, physical marking per RQ017 is mandatory. Delivery is FOB origin with a 171-day lead time, and acceptance is at destination. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous, with palletization in compliance with DLA Packaging Requirements. The required delivery date is March 2, 2027, with a ship date of January 17, 2027. All shipments must be sent to the DLA San Joaquin receiving warehouse in Tracy, CA, and transportation procedures must follow DLAD Proc Notes C19 and C20. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and covered defense information is subject to strict handling protocols. The contract is managed by the Department of Defense under solicitation number SPE4A5-26-T-300F, with Dominique Howard as the primary point of contact.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 12 hours ago

DEADLINE

in 7 days
View Details