This Solicitation opportunity from Department Of Defense was posted on April 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
WRIGHT-GIEMSA STAIN
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
Wright-Giemsa Stain, identified by NSN 6550-00-926-9084, is a liquid reagent supplied in 16-ounce bottles with a unit of issue of BT, ordered in a quantity of two. The procurement is governed by solicitation SPE2DS-26-T-031Z, issued by the Medical Supply Chain MD SURG FSF under the Department of Defense, with delivery required within five days of order placement to the Naval Medical Readiness Logistics Command at Cheatham Annex in Williamsburg, Virginia. The product is classified as a TYPE I (CODE J) item with a mandatory 15-month shelf life that is non-extendable; no more than two months may have elapsed from the date of manufacture to the date of government delivery. All packaging and labeling must conform to Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129, requiring clear marking of the date of manufacture, expiration or retest date, contract number, lot number, and unit of issue in accordance with MMS1C. The stain has flammable and combustible characteristics, triggering compliance with the Hazard Communication Standard (29 CFR 1910.1200), which mandates submission of approved Safety Data Sheets and compliant labels prior to award, along with employee training on hazard communication requirements. Packaging must meet DLA Packaging Requirements for Procurement (RP001), with each unit sealed in a protective container and shipped in suitable commercial exterior containers capable of safeguarding the product during transit at the lowest possible rate. The contract applies Federal Acquisition Regulation clauses including Type of Contract (52.216-1 ALT I), Employment Eligibility Verification, Sustainable Products and Services, and Hazardous Material Identification, along with DFARS clause 252.223-7001 for hazard warning labels. Invoicing must be conducted through Wide Area WorkFlow (WAWF), and compliance with the System for Award Management is required. Proposals must be submitted electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of May 5, 2026, and must include current Unique Entity Identifier and CAGE code along with complete representations on small business status, socioeconomic certifications, and disclosures regarding covered defense telecommunications equipment if applicable. Inspection and acceptance occur at the destination, with final authority resting with the Government, and
General Info
Agency
Contract Value
$362NAICS
Place of Performance
CHEATHAM ANNEX, WILLIAMSBURG, VA, 23185-5830, USASet-Aside
Awardee
Award Issued Date
Timeline
Submission Closed
Organization & Contact Information
Full Description
WRIGHT-GIEMSA STAIN
FEATURES LIQUID
UNIT OF ISSUE: BT (16 OZ PER BOTTLE)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
.. RS012: Shelf-life requirement RS001 for a TYPE I (CODE J) item with a shelf life of 15 months (non-extendable) applies to this item.
SPE2DS-26-T-031Z
SECTION B
SHALL HAVE A SHELF LIFE OF 15 MONTHS.
NOT MORE THAN 2 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURE TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
SHELF LIFE MARKINGS SHALL BE IN ACCORDANCE WITH
THE LATEST REVISION OF MMS1C.
. ALL LABELS SHALL INCLUDE:
DATE OF MANUFACTURE, EXPIRATION, OR RETEST DATE
CONTRACT NUMBER/LOT NUMBER.
..
RQ034: HAZARDOUS COMMUNICATION STANDARD NOTICE
..
Hazard Communication Standard Notice:
Effective June 1, 2015, Federal Standard No. 313-E, Material Safety Data, Transportation Data and Disposal Data for Hazardous Materials Furnished to Government Activities, establishes the requirement for preparation and submission of Safety Data Sheets (SDS) in lieu of Material Safety Data Sheets (MSDS) by suppliers who provide hazardous materials to government activities.
The Occupational Safety and Health Administration (OSHA) has modified its Hazard Communication Standard (HCS) to conform to the United Nations Globally Harmonized System of Classification and Labeling of Chemicals. As a result of this change, GSA revised Federal Standard No. 313-E requiring Safety Data Sheets for classifying chemicals and communicating the applicable information on labels.
In accordance with the revised standard after June 1, 2015:
1. Suppliers will be required to submit, to the contracting officer for review and approval prior to award, safety data sheets consistent with the requirements found at 29 C.F.R. 1910.1200 for hazardous materials delivered to the Government.
2. Suppliers will also be required to submit, to the contracting officer for review and approval prior to award, Hazardous Communication Standard (HCS) labels in accordance with 29 C.F.R. 1910.1200 requirements or current Consumer Product Safety Act (CPSA), Federal Hazardous Substance Act (FHSA) labels when subject to labeling requirements under those statutes. This product labeling is required for hazardous materials delivered to the Government.
3. Finally, suppliers must train their employees on the new safety data sheets, hazardous communication labels, and requirements of 29 C.F.R. 1910.1200.
For more information on SDS, refer to OSHAs website, available at:
https://www.osha.gov/law-regs.html
For information on 29 C.F.R. 1910.1200, refer to the below link:
https://www.osha.gov/dsg/hazcom/index.html .. . ITEM HAS FLAMMABLE/COMBUSTIBLE CHARACTERISTICS. .. ADEQUATE DATA FOR THE NSN/Part Number: 6550-00-926-9084 Quantity: 2 BT Purchase Request: 7016554133QTY: 2 Delivery: 5 days ADO
More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS
