Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Wrightsboro Elevated Water Tank Rehabilitation

Active

345-26-C0810State & Local

Response Deadline10/27/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Cape Fear Public Utility Authority is soliciting sealed bids for the Wrightsboro Elevated Water Tank Rehabilitation project in North Carolina. The scope of work involves the complete removal of existing coatings using full containment and the reapplication of a new coating system, specified as a single color of blue. This is a single prime contract with a response deadline of October 27, 2026, at 11:00 AM. Bids must be delivered to the Procurement Manager at 235 Government Center Drive, Wilmington, NC. To be eligible, bidders must be registered with the Bid Manager and hold a North Carolina General Contractor's license with an Intermediate limitation and a Public Utility classification. Required submission documents include a completely executed Affidavit and Certification of Non-Collusion, Non-Suspension and Non-Conviction, and a bid bond equal to five percent of the total bid amount. The successful contractor will be required to provide construction performance and payment bonds totaling one hundred percent of the contract amount.

General Info

Bids for Wrightsboro water tank coating rehabilitation due October 27, 2026, in NC.

Agency

North Carolina → Cape Fear Public Utility Authority

NAICS

238320 - Painting and Wall Covering Contractors

Place of Performance

NC, USA

Set-Aside

NONE

Documents

(1)

Wrightsboro Elevated Water Tank Rehabilitation - Advertisement for Bids

PDF•ifb

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation

PostedSep 23

Solicitation

Response DeadlineOct 27

Submission deadline

Response Deadline

10/27/2026, 04:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina → Cape Fear Public Utility Authority

Contacts1 person available

OfficeNC, USA

Organization / AgencyNorth Carolina → Cape Fear Public Utility Authority

Office AddressNC, USA

Contacts

Teresa McPherson

Full Description

Show more

Cape Fear Public Utility Authority is accepting bids for the Wrightsboro Elevated Water Tank Rehabilitation project. Scope of work includes complete removal and recoat of the Wrightsboro Elevated Water Tank. This will be a full containment removal and reapplication of coatings. New coating system to be applied per specification, color scheme to be one color blue.

Similar Contracts

Same NAICS industry code

Interior PaintingThis subcontract for interior painting involves providing professional coating services for prime contractors on facility projects within the Little Lake City School District in Santa Fe Springs, California. The scope of work includes masking and protecting adjacent surfaces, applying coatings according to manufacturer recommendations, and performing necessary touch-ups following substantial completion. All materials used must strictly adhere to the VOC content restrictions specified in Section 01 61 16. The opportunity was posted on September 26, 2026, with a response deadline of October 20, 2026. Classified under NAICS code 238320, the contract requires the delivery of fully completed interior painted surfaces that meet the district's quality and environmental standards.

Little Lake City School District

POSTED

DEADLINE

Lakeside MS Paint & Flooring

Solicitation # 26-27-003

The Little Lake City School District is soliciting bids for the Lakeside MS Paint and Flooring project, located in Santa Fe Springs, California. This project involves comprehensive painting and flooring services, including the installation of resilient plank, resilient tile, and resilient base, as well as the application of special finishes. Due to the presence of lead-based paint and presumed asbestos-containing flooring and mastic, the contractor must provide temporary dust, odor, and containment barriers and adhere to all federal, state, and local environmental regulations. The contract requires the use of high-quality materials, including Sherwin-Williams paint and flooring that meets CalGreen Building Standards and ADA slip-resistant requirements. Bids are due by October 20, 2026, and will be awarded to the lowest responsible and responsive bidder. Applicants must be pre-qualified prime contractors holding a current State of California contractor's license. The submission must include a bid security of at least 10 percent of the maximum bid amount, and the successful contractor will be required to provide performance and payment bonds. The project is a prevailing wage contract with a 3 percent Disabled Veteran Business Enterprise participation goal. Key deliverables include completed installations, maintenance manuals, and specific quantities of extra flooring and wall base materials. A 200,000 dollar allowance is included for classroom moving services.

Little Lake City School District

POSTED

DEADLINE

Interior Painting and FinishingThe Little Lake City School District in California is seeking a subcontractor for an interior painting and finishing project located in Santa Fe Springs. The selected contractor will be responsible for painting walls and ceilings in classrooms, offices, and administration spaces, ensuring all surfaces are free of holidays and lap marks. Key technical requirements include the use of low-VOC paints, precision cutting tools for window frames and sills, and the application of masking to prevent overpray. Eligible bidders must hold a standard painting contractor license and adhere to NAICS code 238320. This opportunity was posted on September 26, 2026, with a response deadline of October 20, 2026.

Little Lake City School District

POSTED

DEADLINE

Lakeland ES Interior Paint & Flooring

Solicitation # 20260925023

The Little Lake City School District is soliciting bids for interior paint and flooring improvements at Lakeland Elementary School in Santa Fe Springs, California. The project encompasses comprehensive updates to every classroom, office, and administration space, including the installation of 20 mil resilient plank flooring, rubber cove stick base, and walk-off mats. The scope also includes the preparation and painting of all existing painted surfaces, such as acoustical ceilings, walls, and HMW windows and doors, as well as the installation of new Wilsonart solid surface countertops and the refurbishment of existing casework with new hardware. Contractors must adhere to strict environmental and safety standards, as all existing interior paint is considered lead-based and must be handled per 8 CCR 1532.1. Additionally, the abatement and demolition of existing flooring must be performed in strict accordance with the provided ACM report and work scope. Key requirements include the field verification of all dimensions and conditions prior to bidding, the full removal of furniture and equipment from work areas, and the submission of a complete color palette for approval. All work must be completed according to the construction schedule to ensure spaces are ready for students and staff. The response deadline for this solicitation is October 20, 2026.

Little Lake City School District

POSTED

DEADLINE

Specialized Interior Finishes (Wash-down/Industrial)Associated Engineering (Alberta) Ltd. is seeking a subcontractor for the Specialized Interior Finishes project at the Athabasca Regional Waste Management Services Commission facility. The scope of work involves installing durable, moisture-resistant, and chemical-resistant wall and floor finishes across five service bays and one wash bay to ensure the garage area has washable interior surfaces. Interested parties must submit their responses by October 16, 2026. This subcontract falls under NAICS code 238320 and focuses on providing industrial-grade finishes tailored for high-durability environments.

Associated Engineering (Alberta) Ltd.

POSTED

DEADLINE

Commercial Interior and Exterior PaintingThis subcontract for Commercial Interior and Exterior Painting involves providing professional painting services for prime contractors on facility projects at Kennesaw State University. The scope of work includes the application of latex and oil-based paints, primers, sealers, and elastomeric coatings in accordance with commercial product application procedures to deliver finished interior and exterior surfaces. Qualified providers must possess a minimum of five years of experience in commercial paint application. The opportunity is categorized under NAICS code 238320 and was posted on September 25, 2026, with a response deadline of October 27, 2026.

Kennesaw State University

POSTED

DEADLINE

in about 1 month

KSU FY27 Task Order for Painting and Related Maintenance Contractor Servicess

Solicitation # 54300-eRFQ-00204-0-2027

Kennesaw State University, acting on behalf of the Campus Operations Division, is soliciting Statements of Qualifications for task order contractor services to perform interior and exterior painting and related maintenance across various campus facilities. This solicitation, identified as 54300-eRFQ-00204-0-2027, utilizes a Construction Manager/General Contractor format with lump sum and Guaranteed Maximum Price (GMP) contract pricing. The scope of work includes the application of latex and oil-based paints, primers, sealers, and elastomeric coatings, as well as exterior cleaning using high- and low-pressure systems. Additionally, the selected contractor must be capable of lead-based paint remediation, containment, and disposal, and must be able to perform necessary carpentry and masonry repairs to prepare substrates. Qualified firms must demonstrate at least five years of experience in commercial painting and application procedures. Technical requirements include the ability to safely operate aerial lifts or utilize rope access for project completion. Interested providers must submit their qualifications by October 27, 2026, and are required to provide a Contractor Affidavit, a Statement of Bidders Qualifications, and a Certificate of Non-Collusion. The process also requires registration in the GA@WORK Marketplace and adherence to specific insurance and bonding requirements. Primary contact for this solicitation is Tommie Goodgames.

Kennesaw State University

POSTED

DEADLINE

in about 1 month

Specialized Coating ContractorThis subcontract opportunity is for a Specialized Coating Contractor to provide protective coating services for manholes and structures on projects managed by the City of Chesapeake Department of Public Utilities. The selected contractor will be responsible for surface preparation and the application of industrial protective coatings in strict accordance with Section 109-14. A critical requirement of the contract is the delivery of a signed Manhole/Structure Protective Coating Post Installation Certification upon completion of the work. Interested parties must submit their responses by October 27, 2026, under NAICS code 238320.

Public Utilities

POSTED

DEADLINE

in about 1 month

Interior Painting & WallcoveringsAlcorn State University is seeking a subcontractor for interior painting and wallcoverings under NAICS code 238320. The selected provider will work with prime contractors to perform surface priming, paint walls and trim, and install commercial wallcoverings to deliver finished interior surfaces for university facility projects. Eligible bidders must possess valid Mississippi contractor licenses. The solicitation was posted on September 25, 2026, and the deadline for responses is October 29, 2026.

ALCORN STATE UNIVERSITY

POSTED

DEADLINE

in about 1 month

Warehouse Epoxy Line Striping and Floor MarkingThis subcontract for the Mississippi Department of Revenue involves providing high-visibility industrial floor striping and location numbering for warehouse projects. The scope of work includes washing epoxy floors, sanding to CSP 2-3, and applying a two-part epoxy yellow base coat finished with an aliphatic polyurethane topcoat. The project requires marking 13,250 linear feet of walkways and 9,500 linear feet of pallet footprints in strict accordance with OSHA 29 CFR 1910.22 and ANSI Z535.1 standards. The final deliverable is a fully cured, high-visibility floor system under NAICS code 238320, with a response deadline of October 21, 2026.

MS DEPT of REVENUE

POSTED

DEADLINE

Carpentry and OpeningsThis subcontract for Alcorn State University involves the installation of interior partitions, doors, window frames, and cabinetry for prime contractors on facility projects. The scope of work specifically includes the installation of fire-rated doors, window replacements, and the placement of commercial-grade medical storage cabinetry and millwork. Eligible providers must hold a valid Carpentry or General Contractor License to perform these services. The solicitation was posted on September 25, 2026, with a response deadline of October 29, 2026, under NAICS code 238320.

ALCORN STATE UNIVERSITY

POSTED

DEADLINE

in about 1 month

Striping and Protection Equipment and Labor

Solicitation # 3160008281

The Mississippi Department of Revenue is soliciting bids for striping and protection services at the Alcoholic Beverage Control Distribution Center's new warehouse located at 183 Watford Parkway Drive in Canton, Mississippi. The project involves providing all labor, materials, and equipment for epoxy line striping and the installation of protective devices, including bollards, guard rails, and barriers. Specific deliverables include approximately 13,250 linear feet of walkways, 9,500 linear feet of pallet footprint locations with 583 numbered spots, 1,120 linear feet of receiving lanes with 28 numbered locations, and 620 linear feet of lift equipment parking with 40 numbered locations. Technical specifications require a concrete surface profile of 2 to 3, a 100 percent solids two-part yellow epoxy base coat, and a clear chemical-resistant aliphatic polyurethane topcoat. All high-visibility striping must comply with OSHA 29 CFR 1910.22, OSHA 29 CFR 1910.144, and ANSI Z535.1 standards. The contract term is for two months, running from December 4, 2026, to February 4, 2027. Bids must be submitted in a sealed package by October 21, 2026, at 12:00 p.m. CST. The award will be granted to the responsive and responsible bidder offering the lowest grand total price. To be considered responsible, bidders must have at least five years of experience in industrial or commercial striping and facility protection. Additionally, bidders must provide four current references and achieve a minimum score of six points per reference from two interviewed references, totaling at least twelve points. The contract is governed by the Mississippi Public Procurement Review Board Office of Personal Service Contract Review Rules and Regulations.

MS DEPT of REVENUE

POSTED

DEADLINE

More opportunities from North Carolina → Cape Fear Public Utility Authority

Same awarding agency

Scaffolding & Access ServicesThis subcontract for Scaffolding and Access Services involves the supply and installation of specialized access systems for prime contractors working on Cape Fear Public Utility Authority water tank projects. The scope of work includes the erection and dismantlement of suspended swing stages and high-reach modular scaffolding to ensure safe, certified access to all exterior surfaces of the tanks. Strict adherence to OSHA fall protection compliance and safety tie-off standards is a mandatory requirement for this project. The solicitation was posted on September 23, 2026, with a response deadline of October 27, 2026. This opportunity falls under NAICS code 238990 and is managed by the Cape Fear Public Utility Authority in North Carolina.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Specialized Inspection & TestingThis subcontract for Specialized Inspection and Testing supports Cape Fear Public Utility Authority water tank projects by providing pre- and post-rehabilitation inspections for prime contractors. The scope of work includes performing Dry Film Thickness measurements, holiday detection spark testing, and structural weld audits utilizing NDT equipment and ultrasonic thickness gauges to ensure full compliance and deliver certified inspection reports. Qualified personnel must hold NACE Level 2 or 3 certifications to execute these technical requirements. The solicitation was posted on September 23, 2026, with a response deadline of October 27, 2026, falling under NAICS code 541620.

Environmental Consulting Services

POSTED

DEADLINE

in about 1 month

Mechanical & Valve InstallationThis subcontract for Mechanical and Valve Installation involves the installation and rehabilitation of valves, piping, and mechanical components for water tank projects managed by the Cape Fear Public Utility Authority in North Carolina. The selected contractor will be responsible for replacing altitude valves, drain valves, and piping connections, while ensuring all systems undergo rigorous leak and pressure integrity testing to deliver a fully operational system. Qualified candidates must hold the appropriate plumbing or mechanical licensure and strictly adhere to all Public Utility standards. This opportunity is categorized under NAICS code 238220, with a response deadline of October 27, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

Structural Steel Repair & WeldingThis subcontract for the Cape Fear Public Utility Authority in North Carolina involves providing structural steel repair and welding services for water tank projects. The scope of work includes removing corroded sections and welding new steel plates to tank shells, supports, and catwalks using certified rigging and welding equipment. All work must be performed by AWS certified welders to ensure the delivery of reinforced steel components and certified structural repairs. The solicitation was posted on September 23, 2026, with a response deadline of October 27, 2026. Classified under NAICS code 238120, this opportunity is designed for specialists capable of performing critical infrastructure reinforcement for prime contractors.

Structural Steel and Precast Concrete Contractors

POSTED

DEADLINE

in about 1 month

Specialized Water Tank Coating & LiningThis subcontract for Specialized Water Tank Coating and Lining involves providing abrasive blasting and protective coating services for water tank projects under the Cape Fear Public Utility Authority in North Carolina. The scope of work includes surface preparation using sandblasting or hydro-blasting, followed by the application of weather-resistant coatings and food-grade epoxy linings in accordance with AWWA standards to ensure a fully sealed interior and exterior surface. Qualified contractors must possess SSPC certifications and utilize industrial blast equipment to execute the project. The solicitation was posted on September 23, 2026, with a response deadline of October 27, 2026. This opportunity falls under NAICS code 238320 and is intended for those capable of delivering high-standard industrial coatings for public utility infrastructure.

Painting and Wall Covering Contractors

POSTED

DEADLINE

in about 1 month

Commissioning Agent / Systems TestingThis subcontract for the Cape Fear Public Utility Authority in North Carolina involves the final testing and validation of blower systems for wastewater treatment projects. The selected agent will perform critical technical tasks including airflow measurement, pressure testing, and vibration analysis using specialized equipment such as anemometers and vibration analyzers to ensure all systems meet design specifications. A Professional Engineering certification is mandatory for the final sign-off of the project. The successful contractor is responsible for delivering a comprehensive commissioning report and a formal performance certification. The response deadline for this opportunity is October 8, 2026.

Engineering Services

POSTED

DEADLINE

Electrical Contractor (Power & Controls)This subcontract opportunity with the Cape Fear Public Utility Authority involves the installation of electrical power supplies and the integration of blower control systems for wastewater treatment projects. The selected contractor will be responsible for running conduit and wiring, installing Variable Frequency Drives, and wiring control panels to ensure the systems are fully integrated into the plant SCADA and automation network. All work must be performed in strict accordance with NEC compliance to deliver a fully energized blower system with functional automated controls. Eligible bidders must hold a valid North Carolina Electrical Contractor license. The solicitation was posted on September 17, 2026, with a response deadline of October 8, 2026. This project falls under NAICS code 238210 and requires the contractor to work under prime contractors to complete the specified electrical and automation infrastructure.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Mechanical Contractor (Blower Installation)This subcontract opportunity with the Cape Fear Public Utility Authority involves providing mechanical installation, rigging, and piping services for wastewater treatment projects. The selected contractor will be responsible for removing existing blowers and installing new units, which includes connecting discharge piping and ensuring the installation of airtight seals and vibration isolation mounts. The final deliverable is a fully installed and mechanically connected blower system. Eligible candidates must hold a valid North Carolina Mechanical Contractor license and possess the necessary cranes and hoists to perform the work. This project falls under NAICS code 238222 and requires responses by October 8, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Industrial Blower Equipment SupplierThis subcontract for the Cape Fear Public Utility Authority in North Carolina involves the supply of high-capacity industrial blower equipment for wastewater treatment projects. The selected supplier will be responsible for manufacturing and delivering centrifugal, positive displacement, or turbo blower units, along with the necessary motors and control panels. All equipment must adhere to strict industrial wastewater standards, specific airflow and pressure requirements, and efficiency benchmarks, and must be accompanied by manufacturer warranties and comprehensive technical manuals. The solicitation was posted on September 17, 2026, with a response deadline of October 8, 2026. Falling under NAICS code 333911, this opportunity is designed for suppliers capable of providing specialized machinery to prime contractors operating within the agency's utility infrastructure projects.

Pump and Pumping Equipment Manufacturing

POSTED

DEADLINE

Northside Wastewater Treatment Plant Wastewater Treatment Plant Blower Replacement

Solicitation # 345-27-C0130.1

The Cape Fear Public Utility Authority is soliciting sealed bids for the Northside Wastewater Treatment Plant Blower Replacement project. This single prime contract involves replacing four existing blowers with four high speed turbo blowers, including all necessary valves and controls. Bids must be submitted to Procurement Manager Ben Guerrieri by October 8, 2026, at 11:00 AM. To be considered responsive, bidders must hold a North Carolina General Contractor's license with an Unlimited limitation and a Public Utility classification. Required submission documents include a bid bond or cash deposit of five percent of the total bid amount, a fully executed Affidavit and Certificate of Non-Collusion, Non-Suspension and Non-Conviction, and proof of registration to obtain official contract documents. The successful bidder will be required to provide construction performance and payment bonds totaling one hundred percent of the contract amount.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS