Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

X BAND KIT

Active
FA483026Q0059Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → FA4830 23 Cons CcView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

Fort Moore, GA, 31699, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4830 23 Cons Cc
Contacts2 people available
OfficeMOODY AFB, GA, 31699-1700, USA
Organization / Agency
Department Of Defense → FA4830 23 Cons Cc
View Agency Profile
Office AddressMOODY AFB, GA, 31699-1700, USA
Contacts
Caleb Burks
contact@example.gov
+1 (555) 000-0000
SSgt Samantha Elia
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

*THIS IS A SOURCES SOUGHT*


The Panther II is a tri-band, man-portable Very Small Aperture Terminal (VSAT) system designed for high-speed data communications, including Internet access, VPN connectivity, and video transmission. This requirement focuses exclusively on the X-Band configuration, which is optimized for military satellite communications. The system is available with 60 cm and 96 cm parabolic reflector antennas and supports both manual and auto-acquisition modes. Its lightweight and rugged design allows for transport in a rucksack or airline-checkable hard case.


This is a requirement aimed at enhancing tactical communication capabilities through the deployment of X-Band VSAT systems.
Critical Performance Requirements and Risk Factors
 · High Data Throughput: The system must support data rates up to 3 Mbps transmit and 45 Mbps receive over X-Band frequencies.
· Rapid Deployment: The system should allow for quick setup and acquisition, minimizing the time to establish communications.
· Environmental Resilience: The equipment must operate effectively in temperatures ranging from -32°C to +50°C and withstand wind speeds up to 45 mph with proper anchoring.
· Power Efficiency: The system should support power-saving features and operate on various power sources, including 10-48VDC and 90-264VAC. 
 Risk Factors:
· Environmental Conditions: Extreme temperatures and high wind speeds may affect system performance.
· Power Supply Variability: Dependence on external power sources may pose challenges in remote locations.
Quantities and Sustainment
 The initial procurement is for 1 Panther II X-Band system. Future sustainment will involve maintenance support, potential upgrades, and procurement of additional units based on operational needs.

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
DIBBS
FUSE, ENCLOSED LINKThis contract pertains to the procurement of an enclosed link fuse with NSN 5920-00-882-5114, under solicitation SPE7M1-26-U-4529, issued by the Department of Defense through the Maritime Supply Chain. A quantity of 576 units is requested at a unit price to be determined, with delivery required within 158 days FOB origin, and no variance allowed in quantity. All supplies must comply with DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129, and be palletized per DLA packaging requirements. The item is classified as a critical application, manufactured to SAE AS28937 Revision D and referenced to SAE AS5372 Revision A, with technical and quality requirements incorporated from the DLA Master List. Mercury or mercury-containing compounds are strictly prohibited unless explicitly exempted for functional components like batteries, fluorescent lights, sensors, or naval-specified reagents, and any portable mercury-containing devices must feature shockproof construction with a secondary containment. Inspection and acceptance occur at destination, and hazardous materials packaging must adhere to IP025 standards. The contract is a DLA Direct, CONUS procurement with a response deadline of August 6, 2026, and is tied to purchase request 1000237859.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
FILTER, RADIO FREQUENCYThis contract pertains to the procurement of a Radio Frequency Interference Filter, identified by NSN 5915-00-478-7274 and part number 154397-1, manufactured by approved sources including Raytheon Company and Sprague Electric Co. The item is classified as a critical application and restricted source, requiring government engineering source approval prior to procurement. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede all other standards including ASTM D3951. The product must meet specific drawing requirements outlined in drawing 154397, including a designated thread relief and 1 1/8 18 UNEF thread specifications. Cybersecurity compliance is mandated through a CMMC Level 2 Self-Assessment. Packaging must adhere to DLA packaging requirements and MIL-STD-129 labeling, with hazardous material handling following FED-STD-313 and TQ requirement IP025 if applicable, otherwise commercial packaging per ASTM D3951 under DLA oversight. Palletization and unit packaging must conform to RP001 and specified QUP values. The contract is issued under solicitation SPE7M1-26-U-4559 with a delivery requirement of 189 days FOB origin, a fixed quantity of six units at $6.00 each, and zero variance allowance. Inspection and acceptance occur at destination. The item is procured under DLA Direct, CONUS coverage through the Department of Defense’s Maritime Supply Chain organization. The contract explicitly states that the estimated quantity may not be purchased in full by the IDC. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and is categorized under NAICS code 334220 for electronic component manufacturing. All contractual obligations, including cybersecurity, packaging, technical compliance, and source approval, are binding and require strict adherence by contractors to meet DLA and DoD standards.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
ANTENNAThis contract, identified by solicitation number SPE7M1-26-U-4589, concerns the procurement of an antenna with NSN 5985-01-196-4784, for a quantity of 19 units at a unit price of $19.00, totaling $361.00. The item is to be delivered FOB origin within 595 days, with no variance allowed in quantity, and inspection and acceptance are to occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically RP001 for packaging, MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is hazardous, in which case FED-STD-313 and TQ requirement IP025 apply. Palletization must follow DLA’s procurement standards, and the item must be uniquely identified per IUID requirements outlined in MIL-STD-130 and DFARS 252.211-7003. Physical identification and bare item marking are required, along with compliant measuring and test equipment standards. The contract enforces strict cybersecurity compliance through CMMC Level 2 Self-Assessment and applies Covered Defense Information protocols under RD002. It prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific exempted applications such as functional batteries, fluorescent lights, required instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable mercury-containing items requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract references numerous technical and quality requirements from the DLA Master List, which take precedence over other standards like ASTM D3951. The suppliers listed are L3Harris Technologies, Inc. and The Boeing Company, both with specified part numbers. The solicitation is issued under Department of Defense authority via the Maritime Supply Chain office, with a response deadline of August 6, 2026, and point of contact information provided for inquiries.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
COUPLER, DIRECTIONALThe item is a directional coupler with NSN 5985-01-374-5035, ordered in a quantity of 50 units under purchase request 1000238054, with a delivery requirement of 99 days ADO. Technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign nationals within the United States, without prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 applies to this controlled data, and distribution is strictly limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandated DOD export control training and the DLA export-controlled data questionnaire, and have received explicit approval from the DLA controlling authority. This solicitation, identified as SPE7M1-26-U-4624, was posted on July 22, 2026, with responses due by August 6, 2026, and is set aside exclusively for small businesses under the NAICS code 334220. The contracting activity falls under the Maritime Supply Chain division of the Department of Defense, with Bryan Fair designated as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
REEL CASEThe contract pertains to the procurement of 159 units of Reel Case with NSN 5985-01-397-6971 under solicitation SPE7M1-26-U-4630, which is a Total Small Business Set-Aside. Delivery is required within 158 days from the award date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance both occur at the destination point. Packaging must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and must adhere to MIL-STD-129 for marking and labeling. Palletization must follow RP001 DLA Packaging Requirements, and if the item is hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 applies. The unit of issue is each (EA) at a unit price of $159.00, totaling $25,181.00. All packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract. The delivery is for CONUS and covered under DLA Direct procurement. The point of contact for inquiries is Bryan Fair of the Department of Defense, Maritime Supply Chain.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
DIBBS
ANTENNAThe contract solicitation under number SPE7M1-26-U-4622 seeks 13 antennas identified by NSN 5985-01-325-6960 for delivery within 437 days of award, with a total small business set-aside as defined under FAR 19.5. The acquisition falls under NAICS code 334220 and is managed by the Department of Defense’s Maritime Supply Chain office. All technical and quality requirements referenced in the solicitation are governed by the DLA Master List of Technical and Quality Requirements accessible via the DLA website, with revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless a later amendment supersedes it. The alternate offeror must submit a complete data package covering both the approved and alternate part specifications, and no government identification may be removed from non-accepted supplies. The point of contact is Bryan Fair, reachable via email and phone, and responses are due by August 6, 2026, with the solicitation posted on July 22, 2026. All pertinent information can be accessed through the DIBBS portal.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
Federal
Tactical Communications Equipment Supply
Mschq Norfolk

POSTED

about 10 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
Federal
59--FUSE,ENCLOSED LINK
DLA Land And Maritime

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
Federal
59--REEL CASE
DLA Land And Maritime

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
Federal
13M Fiber Transmitter Modules for the Fairbanks Command and Data Acquisition Station (FCDAS)The U.S. Department of Commerce, through NOAA’s Acquisition and Grants Office, is seeking two replacement Ortel SITU3013 Fiber Transmitter Modules for the Fairbanks Command and Data Acquisition Station in Alaska, under RFQ 1332KP26Q0051. This procurement is strictly limited to the brand-name Ortel product due to the station’s proprietary X-Band fiber optic infrastructure, which requires exact matching of the 1550 nm wavelength and optical output profiles to ensure seamless integration with existing telemetry systems without any modifications. Only Ortel modules will be accepted; alternative brands are non-compliant and will be rejected. The acquisition is conducted under FAR Part 12 using simplified procedures and is classified as a 100% Total Small Business Set-Aside under NAICS code 334220, with a small business size standard of 1,250 employees. All bids must be submitted by August 3, 2026, and performance is required at the Fairbanks site, with inquiries directed to Trang Tran at NOAA’s Silver Spring office.
Department Of Commerce Noaa

POSTED

about 10 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334220
New
Federal
59--FILTER,RADIO FREQUENCY
DLA Land And Maritime

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334220
New
Federal
59--ANTENNA
DLA Land And Maritime

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → FA4830 23 Cons Cc

Same awarding agency

NAICS: 326299
New
Federal
AC-9 Life Raft Maintenance and Servicing
All Other Rubber Product Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 333517
New
Federal
Laser EtcherThe 74th Fighter Generation Squadron is seeking a commercial-off-the-shelf laser etcher system to establish an in-house capability for permanently marking squadron assets, tools, and equipment with critical identification information. This acquisition is essential to meet mission requirements under AFI 21-101, as hand engraving is insufficient for durability and material integrity. The system must be capable of engraving on a range of materials, including hardened tool steels like M43 and chrome-moly, as well as rubber, foam, plastic, acrylic, glass, and wood. A mandatory feature is a 12-inch minimum workpiece height capability, along with a 39-inch by 24-inch working area to accommodate large items such as torque wrenches and breaker bars. The equipment must support automatic laser selection based on material, include rotational attachments and task plates for cylindrical objects, and come with a camera system for precise alignment. It must operate on a standard 110V outlet, feature a 4-inch exhaust port, and include integrated design software compatible with Windows. The vendor must provide on-site installation, five-person operator training, a manufacturer warranty, and direct technical support contact information. The requirement is strictly for a ready-made COTS product with no customization allowed, and failure to acquire it would force costly and mission-threatening outsourcing. This is a total small business set-aside under NAICS code 333517, with responses due by July 21, 2026, and the office managing this effort is located at Moody AFB, Georgia, with performance at Fort Moore.
Machine Tool Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332994
New
Federal
Weapons PartsThe Air Force is seeking information from potential suppliers capable of providing commercial-off-the-shelf small arms components and optical sighting systems under a sources sought initiative for a Total Small Business Set-Aside. The requirement includes 19 units each of specialized upgraded upper receiver groups in 14.5-inch and 11.5-inch configurations, Geissele SSF SOPMOD triggers, ZEV G19 slides, Glock 19 Gen 3 OEM barrels and slide kits, Ruggedized Miniature Reflex sights, Unity Tactical optics risers, Aimpoint SU-278A/PVS red dots, NIGHTFORCE NX8 1-8x24 F1 FC-DMX scopes, and Next Generation Aiming Lasers, all requiring factory-new, OEM-authorized equipment. Vendors must submit a capability statement not exceeding five pages that includes their business name, address, CAGE and UEI codes, NAICS 332994-based small business size status, confirmation of OEM authorization, and lead times for delivery. This effort is purely for market research to inform future procurement planning and is not a solicitation for immediate award. Responses are due by July 23, 2026, and must be directed to the point of contact at Moody Air Force Base, Georgia, with performance anticipated at Fort Moore, Georgia.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in about 20 hours
View Details
NAICS: 611699
New
Federal
38 RQS Free Fall trainingThe 38th Rescue Squadron at Moody AFB is seeking a contractor to provide a five-day free fall training support package focused on canopy control and relative flight operations, scheduled for August 3 through August 7, 2026. The contractor must secure a dropzone and facility within an eight-hour drive of Moody AFB, Georgia, with travel costs for locations beyond this radius included in the evaluated price. Services required include aviation support, rigging facility access, and certified rigging personnel, while the 38th RQS Pararescuemen will handle all academic and tactical instruction. This is a total small business set-aside under NAICS code 611699 with a size standard of $16.5 million, and awards will be made using the Lowest Price Technically Acceptable method based on price, technical acceptability of the submitted statement of work, and past performance. Quotes must be submitted electronically by 9:00 AM EST on July 23, 2026, in three volumes: pricing and contract documents, technical quotation, and past performance information, and sent to both the Contracting Officer and Contract Specialist. All questions must be submitted by July 17, 2026, using the prescribed form, and bidders must comply with insurance and wage requirements outlined in the attachments.
All Other Miscellaneous Schools and Instruction

POSTED

6 days ago

DEADLINE

in about 15 hours
View Details
NAICS: 541330
Federal
Compliance and Technical Documentation SupportThis contract involves providing support for the preparation of technical documentation, including capability statements, product specification sheets, and compliance matrices, specifically aligned with standards DAFI 36-2646, UFC 3-600-01, and UFC 4-179-02. The work is focused on ensuring adherence to these detailed regulatory and compliance requirements, which are critical in the context of Department of Defense operations and guidelines. Designated as a subcontract opportunity under a Total Small Business Set-Aside (FAR 19.5), the contract falls within the NAICS code 541330, which pertains to engineering services. The performance location is specified as Fort Moore, with the Department of Defense serving as the contracting agency. This specialized documentation support is intended to facilitate compliance and technical validation within defense-related projects, emphasizing expertise in both regulatory standards and technical writing necessary to meet stringent government specifications.
Engineering Services

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 238210
Federal
IT and Electrical Systems Installation (Non-Networked)This contract involves the installation of dedicated 120V electrical circuits, dimmable LED lighting equipped with occupancy sensors, HVAC systems, and fire protection systems specifically for a virtual weapons range room. It is categorized under IT and electrical systems installation, excluding networked services. The work is designated as a total small business set-aside under the SBA guidelines, aligning with NAICS code 238210, which covers electrical contractors and other wiring installation contractors. The contract is issued by the Department of Defense through the FA4830 23 Cons Cc agency and is to be performed at Fort Moore, with the zip code 31699. As a subcontract opportunity, it requires specialized installation services to enhance the operational environment of the virtual weapons range by ensuring proper electrical infrastructure, energy-efficient and responsive lighting, effective climate control, and adequate fire safety measures. This scope ensures compliance with safety and operational standards critical for the facility's intended use.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 236220
Federal
Specialized Room Construction and Acoustic ModificationsThis contract involves the construction or retrofit of a specialized room designed to house a virtual weapons range. The scope includes building walls and doors rated at STC 50 for soundproofing, installing sealed concrete flooring with a raised firing platform, and ensuring a minimum ceiling height of ten feet. These requirements target a highly controlled acoustic environment suitable for training and operational use. The contract is a subcontract set aside entirely for small businesses under the Small Business Administration guidelines (FAR 19.5). It falls under the NAICS code 236220, which pertains to commercial and institutional building construction. The work is to be performed at Fort Moore, with oversight by the Department of Defense, specifically the FA4830 23 Cons Cc office. The project emphasizes both structural modifications and acoustic considerations to meet the specific demands of the virtual weapons training system.
Commercial and Institutional Building Construction

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 334510
Federal
Virtual Weapons Range System Integration and Hardware SupplyThe contract involves the supply and integration of a stationary, multi-lane virtual weapons training system designed to simulate domestic environments and firing distances ranging from 7 to 300 meters. The system utilizes free-carry M4 and M18 replica weapons to provide realistic training scenarios. This contract is a total small business set-aside under the NAICS code 334510, indicating it focuses on electronic equipment manufacturing. The Department of Defense's FA4830 23 Cons Cc is the contracting agency, with the place of performance specified as Fort Moore, ZIP code 31699. The contract was posted on May 19, 2026, and is categorized as a subcontract opportunity. This initiative aims to enhance training capabilities by providing advanced, integrated virtual weapons range hardware and software solutions that simulate real-world operational conditions for military personnel.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

2 months ago

DEADLINE

N/A
View Details