Z -- REBUILD TAMPA BAY CUT K UPPER RANGED REAR LIGHT AT U.S. COAST GUARD ANT ST. PETERSBURG FL

SOURCES SOUGHT: The project work location is the U.S. Coast Guard Tampa Bay Cut K, Aids to Navigation St. Petersburg, FL. The project work includes furnishing all labor, tools, equipment and labor to rebuild one Range Rear Light (RRL) structure and modify existing range front light structure to fit new navigational equipment. Structures are located in Tampa Bay south of the Gandy Bridge. Provide new support structure for the Rear Range Light. Support Structure shall be composed of five 18" diameter steel pies with a 20" diameter pile jackets, and a 12-10 X 12-10 steel platform with fiberglass grating. Locate and drive 18 diameter tubular piles. Approximate water depth ranges from 16' for the Rear Range Light. Install and weld steel platform to steel tubular piles. Install and fasten Coast Guard Standard modular tower sections to support structure platform. Modular tower is approximately 50' tall. Install safety climb rails onto modular tower, Modular tower sections and safety climb rail will be Government Furnished Equipment (GFE). Install new navigational equipment, i.e. lanterns, batteries, solar panels, charge controller, which will also be GFE. Remove old modular tower and support structure. Existing structure has concrete filled piles. Estimated price range is between $250,000 and $500,000. Performance period is 120 calendar days from notice to proceed. The applicable North American Industry Class System (NAICS) 2002 code is 237990. The small business size standard is a three-year averaged annual gross receipt of $31 million. Bid, payment and performance bonds are required. The solicitation in its entirety and any amendments will be available at no charge online at http://www.fedbizopps.gov under the above solicitation number. This action is being considered for 100 percent set-aside for HUB Zone small business concerns. Interested HUB Zone small business concerns should indicate their interest to the Contracting Officer as soon as possible, but no later than 15 calendar days from the posted date of this notice. As a minimum, the following information is required: (a) a copy of the certificate issued by the SBA of your qualifications as a HUB Zone concern, (b) a positive statement of your intention to submit an offer for this solicitation as a prime contractor, (c) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, and points of contacts and telephone numbers and (d) provide evidence of bonding capability to the maximum magnitude of the project, to include both single and aggregate totals. All information must be submitted in sufficient detail for a decision to be made on availability of interested HUB Zone concerns. Failure to submit all information requested will result in a contractor not being considered as an interested HUB Zone concern. If adequate interest is not received from HUB Zone concerns by close of business 15 calendar days from the date of this notice, this solicitation will be issued as a Total Small Business Set-Aside without further notice. To receive immediate notification of all changes and future notices posted electronically for this project, vendors should click on - Register to Receive Notification. All vendors interested in teaming or subcontracting for this solicitation should click on - Register as Interested Vendor. In order to view a - Bidder's List, interested parties should click on - View List of Interested Vendors. No telephone or written requests shall be accepted.