Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

YOKE, BAR T BAY DOOR

Active
SPE8EF-26-Q-0143Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of three YOKE BAR T BAY DOOR units with NSN 1730-01-003-6169, under solicitation SPE8EF-26-Q-0143, with a response deadline of August 5, 2026, and a delivery requirement of 60 days after contract award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item is subject to export control under ITAR or EAR, restricting disclosure of associated technical data to foreign persons regardless of location and requiring prior government authorization for any export, including transfers to foreign nationals within the U.S. Only DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and approved access through the DLA questionnaire may handle this data. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and adherence to Covered Defense Information and Cybersecurity Maturity Model Certification Level 2 protocols. The solicitation is managed by the Department of Defense under the Construction & Equipment Manu & Con organization, with Russell Keiser as the point of contact.

General Info

Procure three YOKE BAR T BAY DOOR units with ITAR/EAR controls, 60-day delivery, DLA standards, and CMMC Level 2 compliance.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE8EF-26-Q-0143.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Russell Keiser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
YOKE, BAR T BAY DOOR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1730-01-003-6169 Quantity: 3 EA Purchase Request: 7016668648QTY: 3 Delivery: 60 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332312
New
SLED
Crash Cushion Component Supply (Fabrication and Delivery)The Texas Department of Transportation is soliciting subcontractors to supply and deliver replacement components for crash cushions, including energy-absorbing cores, guide rails, support brackets, and impact heads. The contract involves potential off-site fabrication of these components to meet specified engineering and safety standards, ensuring compatibility and performance in highway safety applications. All items must be delivered in accordance with technical requirements and timelines established by the agency, with fabrication processes subject to quality control measures to guarantee durability and impact resistance under real-world conditions. The solicitation is open for responses until August 18, 2026, and is classified as a subcontract under NAICS code 332312, which pertains to metal forging and stamping. While no set-aside provisions are specified, participation is expected from vendors capable of handling precision manufacturing and timely logistics coordination to support maintenance and safety upgrades across Texas roadways. The contract is accessible via the Texas SmartBuy portal, and all submissions must adhere to the procedural guidelines outlined in the solicitation documents, with performance tied to strict delivery schedules and compliance with transportation safety regulations.
Texas Department of Transportation

POSTED

about 18 hours ago

DEADLINE

in 21 days
View Details
NAICS: 332312
New
DIBBS
NON-NSN ITEMThis contract specifies the procurement of 10 units of commercial hardware identified by CAGE code 7Z049 and part number H-7854, supplied by ULINE INC based in Pleasant Prairie, Wisconsin. The unit price is $10.00 per item, resulting in a total contract value of $100.00, with no variance allowed in quantity—exactly 10 units must be delivered. Delivery is required within 10 days of contract issuance, with FOB destination terms meaning the supplier bears all transportation risks and costs until the goods reach the final delivery point. Inspection and acceptance occur at the destination, which is Camp Carroll, Building 505, Waegwan, South Korea, under the military shipping address WT4KEA W0C3 USAMSC-K SP60. Packaging must fully comply with ASTM D3951 and MIL-STD-129 marking standards, with palletization adhering to DLA’s RP001 requirements, ensuring the Unit of Issue and Quantity per Unit Pack are strictly followed. The item is to be shipped per DLAD PROC NOTE C19 and C20, and must be labeled and delivered as directed to the government-designated recipient. The required delivery date is May 11, 2026, and the procurement is under solicitation SPE8EE-26-T-2178, with the contracting officer contact listed as Philip Ferrara. All deliveries must meet DLA’s Master List of Technical and Quality Requirements, which override any general industry standards.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
DIBBS
NON-NSN ITEMThe contract is for the procurement of 8 units of Commercial Hardware III with CAGE code 1JA49 and part number CLN2001-BK, supplied by NEW PIG CORPORATION located in Tipton, Pennsylvania. The item is non-NSN and is being procured under solicitation SPE8EE-26-T-2181 with a required delivery date of May 21, 2026, and a delivery window of 20 days from contract award. Delivery is FOB destination with no variance allowed in quantity, and inspection and acceptance occur at the destination point. Packaging must comply with ASTM D3951 and must adhere to MIL-STD-129 labeling requirements, with palletization following DLA RP001 guidelines. The unit of issue is each, priced at $8.00 per unit, totaling $64.00. The destination for delivery and marking is Camp Carroll, Waegwan, South Korea, under the W50YED activity code, and transportation logistics are governed by DLA Procurement Notes C19 and C20. The contract specifies government use only with a DIC code A02 and a contract data code of 61. Primary contact for the procurement is Philip Ferrara at DLA, with a response deadline of August 3, 2026.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
DIBBS
ROD ASSEMBLY, ADJUSTThe contract pertains to the procurement of one adjustable rod assembly with NSN 5410-01-573-9909, issued under solicitation SPE8ED-26-T-1182 by the Department of Defense through DLA. Delivery is required within ten days of contract award, with delivery point set at FOB origin and acceptance occurring at the destination. The item must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 guidelines, and all marking and labeling must meet MIL-STD-130N for U.S. military property identification. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted under specific functional applications as defined by NAVSEA, with additional containment requirements for any permitted uses. The sole supplier is G.T. Machining & Fabricating Ltd. under part number 111955401, and the delivery destination is the US Army SSA Powidz AB in Poland. The unit of issue is each, with zero variance allowed in quantity, and transportation instructions are governed by DLAD PROC NOTES C19 and C20. Documentation for source approval must satisfy RC001, and any covered defense information is subject to RD003 requirements. The required delivery date is July 29, 2026, with no specified need ship date.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332312
New
DIBBS
NON-NSN ITEMNEW PIG CORPORATION located in Tipton, Pennsylvania, has been awarded a contract to supply 20 units of hardware item WPL672-10 with CAGE code 1JA49 under purchase request 7016903974 for the U.S. Department of Defense. The item must be delivered within 20 days to Camp Carroll, Waegwan, South Korea, with FOB destination terms, meaning the vendor retains responsibility until delivery at the final point. Quantity is strictly fixed at 20 units with no tolerance for variance. Packaging must comply with ASTM D3951 as well as all applicable DLA Master List requirements and MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging standards. The unit of issue is each, and the contract price is set at $0.00 per unit, totaling $0.00, indicating a potential nominal or administrative pricing structure. The delivery is directed to a U.S. military installation in Northeast Asia under transportation guidance specified in DLAD Proc Note C19 and C20. The contract is tied to solicitation SPE8EE-26-T-2182 with a required delivery date of May 21, 2026, and the point of contact is Philip Ferrara of DLA. The item is identified as a non-NSN, classified under NAICS code 332312, and government use fields indicate this is an advance distribution with code A02 and funding code 61.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 23 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332312
New
SLED
Material Supply – Structural Steel & Reinforcing Steel
0H100 - HIGHWAY

POSTED

about 24 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332312
New
SLED
Galvanized Steel Grating Supply and InstallationThe contract is for the supply and installation of galvanized steel grating to be used in walkways, platforms, or drainage areas within San Diego County. It is classified as a subcontract under NAICS code 332312, indicating it pertains to fabricated metal product manufacturing, specifically related to structural metal fabricating. The solicitation was posted on July 27, 2026, with a response deadline of August 25, 2026, requiring all proposals to be submitted by 10:00 PM Pacific Time. The work must be performed in San Diego, and while no specific set aside or organization type is indicated, the contract is issued through San Diego County’s procurement system via the provided external link. The materials must meet galvanized steel standards for corrosion resistance and durability in outdoor or high-moisture environments, and installation must comply with structural and safety requirements for public access areas.
San Diego County

POSTED

about 24 hours ago

DEADLINE

in 28 days
View Details
NAICS: 332312
New
SLED
Reinforcing Steel Supply and Placement
0H100 - HIGHWAY

POSTED

1 day ago

DEADLINE

in 28 days
View Details
NAICS: 332312
New
SLED
Tapping Sleeves Supply
Dekalb County Government

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 332312
New
Federal
Structural Steel Fabrication and Erection
257-NETWORK Contract Office 17 (36C257)

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
Federal
L-Block Shield Supply
246-NETWORK Contracting Office 6 (36C246)

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332312
New
Federal
Lead Brick Cave Assembly and Supply
246-NETWORK Contracting Office 6 (36C246)

POSTED

1 day ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

NAICS: 332710
New
DIBBS
YOKE ASSYY, LOADERThe contract pertains to the procurement of seven yoke assemblies for a loader, identified by NSN 1730-01-455-9629 and part number 9383309-1, under solicitation SPE8EF-26-Q-0150. The item is classified as a critical application item and must adhere to Technical Data Package Rev B Gen 3 referenced against multiple drawings with specified revisions and dates. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size, and any amendments take precedence. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and unidentified attributes are treated as major. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization in accordance with DLA Packaging Requirements RP001, while the DLA Master List supersedes any conflicting standards. The delivery is firm fixed price with no variance allowed, and the item must be delivered within 60 days of the award date to the designated DLA distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, and all packaging and labeling must meet required military standards. The contract also identifies potential application of Covered Defense Information and mandates adherence to specific transportation protocols outlined in DLAD Proc Notes C19 and C20.
Machine Shops

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333922
New
DIBBS
ACTUATOR, ELECTRO-METhe contract pertains to the procurement of six electro-mechanical actuators, identified by NSN 3910-01-724-7721 and manufacturer part number DG-012203-04 from DRS Naval Power Systems Inc, under solicitation SPE8EF-26-T-0915. Delivery is required within 168 days of contract award, with shipment occurring FOB origin and inspection and acceptance taking place at the destination warehouse in Tracy, California. The unit of issue is each, with a fixed quantity of six units and no variance allowed. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, including palletization as specified. The product is designated as a critical application item, and covered defense information may apply. The shipment must be delivered to the designated receiving warehouse by September 29, 2026, with the original required delivery date set for December 26, 2026. Transportation and shipping instructions follow DLAD procedural notes C19 and C20. The contract price is $6.00 per unit, totaling $36.00. All documentation, labeling, and packaging must reflect the specified unit of issue and quantity per unit pack as stated in the contract, and the point of contact for inquiries is Russell Keiser with the Department of Defense.
Conveyor and Conveying Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 2 days
View Details
NAICS: 336390
New
DIBBS
SPINDLE, WHEELThe contract pertains to the procurement of 19 rear wheel spindles with NSN 1730-00-568-0653 under solicitation SPE8EF-26-Q-0146, issued by the Defense Logistics Agency. Delivery is required within 60 days of award, and the solicitation closure date is August 6, 2026. The technical and quality requirements governing this procurement are defined by the DLA Master List of Technical and Quality Requirements, with applicability determined by the acquisition type and relevant document revision dates. This item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons, regardless of location. Access to this controlled data is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program credential, have completed mandatory DOD export control training, and have been formally approved by DLA. Additional compliance requirements include adherence to DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and the handling of covered defense information. The contract is classified as a federal solicitation with no set-aside designation and is managed by the Department of Defense’s Construction & Equipment Manufacture and Construction organization.
Other Motor Vehicle Parts Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332996
New
DIBBS
FITTING, ATTACHMENT,The contract pertains to the fitting and attachment with NSN 1730-01-111-6877, requiring one unit to be delivered within 60 days of award. It incorporates technical and quality standards referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless amended. The item is subject to Covered Defense Information requirements and must comply with Cybersecurity Maturity Model Certification Level 2, requiring performance by a certified third-party assessment organization. Packaging must adhere to DLA-specific procurement standards, and non-accepted supplies must have government identification removed. Bare items require physical identification marking, and all technical data associated with this item is controlled under ITAR or EAR, restricting export, including disclosure to foreign nationals even within the United States, and mandating compliance with DFARS 252.225-7048. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, who have completed mandatory DOD export control training and the DLA questionnaire. The solicitation number is SPE8EF-26-Q-0144, with a response deadline of August 5, 2026, and the point of contact is Russell Keiser at the Defense Logistics Agency.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
PAD, HOIST ADAPTER, GThe contract pertains to the procurement of three PAD, HOIST ADAPTER units with the NSN 1730-01-129-3576 under solicitation SPE8EF-26-Q-0148, with a delivery requirement of 60 days after award. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer of associated technical data to foreign persons without prior authorization from the Department of State or Commerce, including foreign national employees and subsidiaries; DFARS 252.225-7048 applies. Only DLA contractors with approved US/Canada Joint Certification Program status, completion of DOD export-controlled data training, and successful review of the DLA Export-Controlled Technical Data Questionnaire are permitted access to this data. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, physical marking of bare items, and adherence to Cybersecurity Maturity Model Certification Level 2 standards through a certified third-party assessment organization. Covered defense information requirements are in effect, and the point of contact for inquiries is Russell Keiser with the Department of Defense, Construction & Equipment Manu & Con.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333922
New
DIBBS
ROLLER, CONVEYORThe contract pertains to the procurement of one unit of a roller conveyor, identified by NSN 3910-01-653-9991 and part number 86312-14, under solicitation SPE8EF-26-Q-0139. The item is classified as a critical application item and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, including specific mandates for cybersecurity maturity under CMMC Level 2 self-assessment, FAA bare item marking, and supply chain traceability per DLAD Procurement Note C03. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-STD-129 for marking, and DLA Packaging Requirements, with no special marking required and palletization following RP001 standards. Inspection and acceptance occur at destination under a firm fixed price with zero variance tolerance, and delivery is due 60 days after award. The item must also meet FAA airworthiness approval requirements and incorporate covered defense information protocols. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract specifies the government’s delivery and freight destination as Tracy, California, with the technical data package referencing drawing number 14153 RE-016539991 and CDRL FAACERTCOM-25015. The unit of issue is EA, pricing is fixed, and the contractor must retain full supply chain documentation as mandated.
Conveyor and Conveying Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
ADJUSTMENT ASSEMBLY, TRThe contract pertains to the procurement of five Adjustment Assembly, Traverse units with NSN 1730-00-568-0621 under solicitation SPE8EF-26-Q-0116, with a delivery requirement of 90 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with revisions in effect on the solicitation issue date controlling for simplified acquisitions and the RFP issue date for large acquisitions unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes deemed major. Manufacturing may involve casting or forging, and contractors seeking tooling or material support must submit a request via the designated DLA portal or email. The item is subject to export control under ITAR or EAR, restricting technical data disclosure to foreign persons regardless of location, and access is limited to contractors with JCP certification, completed DLA training, and formal approval. Identification marking must comply with MIL-STD-130N, and a Certificate of Conformance is required. Drawings are available only during the open solicitation period via the DIBBS portal, and covered defense information applies under the contract. The point of contact for inquiries is Russell Keiser, with the solicitation open until August 5, 2026.

POSTED

about 23 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ADAPTER, BOMB SKIDThe contract is for the procurement of 26 units of an ADAPTER, BOMB SKID with NSN/Part Number 1730-00-719-9516 under solicitation SPE8EF-26-T-1517, issued as a HUBZone Set-Aside with a NAICS code of 336413. Delivery is required within 149 days after order placement, and responses must be submitted by August 7, 2026. The item involves technical data subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed Export-Controlled Technical Data training, and DLA authorization may access the controlled data. The contractor must adhere to DLA packaging standards, remove government identification from non-accepted supplies, and handle covered defense information as defined in RD002. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions controlled based on acquisition size and amendment dates. The contract is administered by the Department of Defense through the Defense Logistics Agency, with performance location in New Cumberland, Pennsylvania, and primary point of contact Russell Keiser.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
TOWBAR, AIRCRAFTThe contract is for the procurement of 17 aircraft towbars under NSN 1730-01-155-2670, issued as a total small business set-aside solicitation with the number SPE8EF-26-T-1518. The requirement is governed by strict technical and quality standards referenced in the DLA Master List, with compliance based on the version in effect on the solicitation issue date. The item includes technical data subject to export control under ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Only contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and approved the export-controlled data questionnaire, may access this controlled technical information. Packaging must adhere to DLA specifications, and non-accepted supplies must have government identification removed. Delivery is due within 149 days after award, with performance located in New Cumberland, Pennsylvania. The solicitation closed on August 7, 2026, and the point of contact is Russell Keiser of the Department of Defense.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
BLOCK ASSEMBLY, PUMP ANThe contract solicitation SPE8EF-26-Q-0142 seeks six units of a Block Assembly, Pump and Valve identified by NSN 1730-01-118-5152, with delivery required within 60 days of award. All technical and quality requirements referenced in this solicitation are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions unless amended. The item involves sensitive technical data subject to export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals employed by U.S. entities. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and received DLA approval. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted items, physical marking of bare items, and adherence to cybersecurity standards under CMMC Level 2, administered only by certified third-party assessment organizations. Covered defense information is subject to strict handling protocols, and the solicitation is open for response through August 5, 2026, with Russell Keiser designated as the primary point of contact.
Industrial Valve Manufacturing

POSTED

about 23 hours ago

DEADLINE

in 8 days
View Details