Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

YOKE, UNIVERSAL JOIN

Active
SPE4A6-26-T-11FZFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of four YOKE, UNIVERSAL JOIN units with NSN 1680-01-692-3584 under solicitation SPE4A6-26-T-11FZ, with a response deadline of August 10, 2026, and a delivery requirement of 848 days after delivery order issuance. Technical data for this item is not publicly available due to proprietary or insufficient documentation, limiting competitive procurement. The contract incorporates technical and quality requirements from the DLA Master List, with compliance tied to the revision in effect on the solicitation issue date. Source approval documentation is required, and the item is subject to Covered Defense Information and Cybersecurity Maturity Model Certification Level 2, necessitating certification by a C3PAO. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies, and bare item marking is required, though Item Unique Identification is waived per customer request. Technical data associated with this item is subject to ITAR or EAR export controls, and only contractors with approved JCP certification, completed DLA training, and explicit authorization may access it. The place of performance is Cherry Point, North Carolina, and inquiries should be directed to Zachary Gonzalez at the Department of Defense’s ASC Commodities Division.

General Info

Procure four YOKE UNI JOIN units, NSN 1680-01-692-3584, delivery in 848 days, CMMC Level 2, ITAR controlled, Cherry Point, NC.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

PHANTOM RD BLDG 147 BAY A, CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11FZ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
ZACHARY GONZALEZ
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
YOKE,UNIVERSAL JOIN
YOKE, UNIVERSAL JOIN
DSCR DOES NOT CURRENTLY HAVE AN APPROVED
TECHNICAL DATA PACKAGE AVAILABLE FOR THIS NSN.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the
SPE4A6-26-T-11FZ
SECTION B
export-controlled data. NSN/Part Number: 1680-01-692-3584 Quantity: 4 EA Purchase Request: 7017696305QTY: 4 Delivery: 848 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PLUG, INLET, HIRSS
Solicitation # SPE8EF-26-T-1538
The contract pertains to the procurement of one unit of a PLUG, INLET, HIRSS with NSN 1730-01-246-6758 and part number 70700-20514-042, supplied by SIKORSKY AIRCRAFT CORPORATION and AIRBORNE INDUSTRIES INC. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. The item is designated as a critical application item and must comply with Item Unique Identification (IUID) standards per MIL-STD-130 and the DFARS 252.211-7003 clause. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA packaging regulations, with palletization following RP001 guidelines. Sampling for acceptance follows the SIKORSKY CORP QAP 1201 alternative plan, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The item must be shipped via the fastest traceable method, excluding parcel post, with delivery directed to a designated U.S. Army facility in Boise, Idaho. The shipment is identified by RDD 777 and is tied to project TP 3 under contract SPE8EF-26-T-1538. The original required delivery date is August 3, 2026, and the contract includes provisions for configuration change management, variance requests, removal of government identification from non-accepted supplies, and compliance with measuring and test equipment standards. All documentation and compliance actions are subject to the DLA Master List revision effective on the solicitation date.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, ENGINE, LH, A
Solicitation # SPE4A5-26-T-318P
The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
UPLOCK ASSEMBLY, SWA
Solicitation # SPE7LX-26-U-9124
The contract pertains to the procurement of a UPLOCK ASSEMBLY, SWAYBRACE with NSN 1095012849952 and part number 116018-1, supplied by L3HARRIS TECHNOLOGIES, INC. under solicitation SPE7LX-26-U-9124. Six units are required at a unit price of $6.00, totaling $36.00, with delivery required within 21 days FOB origin. The item is classified as a critical application item and falls under DLA DIRECT, CONUS coverage. The contract incorporates mandatory technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization strictly adhering to specified guidelines. The Government prohibits acceptance of surplus stock, and any non-accepted supplies must have government identification removed. Demilitarization procedures for Category I munitions items apply, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. The unit of issue is each (EA), and the procurement is subject to DoD authorized units of measure.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
STRIP WING
Solicitation # SPE4A6-26-Q-1212
The contract pertains to the procurement of one unit of a Strip Wing identified by NSN 1560-01-608-2561, with a delivery requirement of 111 days after contract award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The item is subject to Covered Defense Information requirements and must comply with DLA packaging standards. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the point of origin. Government identification must be removed from non-accepted supplies, and physical identification or bare item marking is required. Item Unique Identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exception. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons anywhere in the world, and DFARS 252.225-7048 is fully applicable. Access to this controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DLA training and questionnaire, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-Q-1212, issued on August 2, 2026, with responses due by August 10, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, with Bryan Distin listed as the primary point of contact.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605H
This contract pertains to the procurement of six structural fitting components identified by NSN 0001S00000052 under solicitation SPE4A7-26-T-605H, with a delivery deadline of 588 days after contract award. The requirement is set aside exclusively for small businesses as defined under FAR 19.5, with the NAICS code 336413 indicating the classification under Aerospace Product and Parts Manufacturing. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific identifiers R and I directing compliance to documented criteria. The deliverables must adhere to DLA packaging standards and include mandatory documentation for source approval requests. The item is subject to stringent export controls under ITAR or EAR, restricting technical data sharing without explicit authorization, and access is limited to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Compliance with configuration change management is required through engineered change proposals for any deviations or waivers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating qualification per procurement note H02. Physical marking of the bare item is mandated, though Unique Item Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance requires CMMC Level 2 certification by an approved third-party assessment organization. Data related to this procurement is classified as Covered Defense Information under RD002, and the point of contact for inquiries is April Reed at the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILTER, FLUID
Solicitation # SPE4A7-26-T-605E
This contract is for the procurement of two hydraulic fluid filter assemblies with NSN 1650-00-831-8146 under solicitation SPE4A7-26-T-605E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The requirement is a Total Small Business Set-Aside under NAICS code 336413, with a response deadline of August 10, 2026, and a delivery date 207 days after contract award. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, regardless of location, and applies to all parties including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and cleared access through DLA may receive the technical data. The place of performance is Robins Air Force Base, Georgia, and the primary point of contact is April Reed, reachable via email and phone provided.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ARMOR, SUPPLEMENTAL,
Solicitation # SPE4A7-26-T-606G
The contract is for one unit of supplemental armor for small arms fragmentation, sourced from Foster-Miller, Inc. with CAGE code 30233 and NSN 1560-01-434-6349, under solicitation number SPE4A7-26-T-606G. Delivery is required within 20 days FOB origin to North Kingston, Rhode Island, with no tolerance for quantity variance. The item is designated as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-1916 or comparable zero-based sampling plans for inspection, with zero non-conformances required unless otherwise specified. The supplier must adhere to rigorous packaging directives including MIL-STD-2073-1E and MIL-STD-129 for marking, while also following Qinetiq Packaging Instruction 1210300059 and DLA packaging requirements. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandatory, and hazardous materials shipping procedures must be followed per IP025. Shipping must occur via the fastest traceable means—parcel post is explicitly prohibited. The contract includes detailed inspection and acceptance at destination and specifies the responsible government point of contact as April Reed of the Department of Defense, with an original required delivery date of June 2, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
INSULATION, SUPPORT
Solicitation # SPE4A7-26-T-606D
The contract specifies the procurement of a commercial off-the-shelf (COTS) insulation and support item identified by part number 02250158-385 and NSN 1680-01-649-5646, with a quantity of one unit to be delivered within five days under the solicitation SPE4A7-26-T-606D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be packaged in accordance with ASTM D3951 while strictly adhering to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Sampling requirements mandate compliance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The item must be palletized per DLA requirements, labeled with the assigned unit of issue, and shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is Marine Aviation Logistics Squadron 14 at MCAS Cherry Point, North Carolina, with the original required delivery date set for March 4, 2026. All technical and quality provisions referenced in the DLA Master List take precedence over other standards, and the contract includes detailed shipping, identification, and government-only fields for logistics and tracking purposes.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
VALVE INLET SEAT
Solicitation # SPE4A5-26-T-318V
The contract pertains to the procurement of 13 valve inlet seats with NSN 1650-00-471-7681 and part number AC08822 supplied by Meggitt Aerospace Limited, under solicitation SPE4A5-26-T-318V. Delivery is required within 347 days of award, with FOB origin terms and inspection and acceptance occurring at the destination. The item is classified as a critical application item and must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any conflicting specifications such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with configuration control enforced through engineering change proposal and variance procedures. Sampling inspections must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and physical marking of the item is mandatory. The unit of issue is each (EA), with no variance permitted in quantity, and delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania by July 24, 2027. All documentation and compliance obligations referenced in the DLA master list are binding and take precedence.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CONTROL STICK, AIRCR
Solicitation # SPE4A5-26-T-317Z
The contract is for a single Control Stick, Aircraft, identified by NSN 1680-00-054-3600 and part number 209-001-334-007, supplied by Bell Textron Inc. The item is classified as a critical application item and must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, with no special marking required. Packaging must be palletized according to DLA directives and use E5 unit containers with preservative method 10 and non-corrosive dry packaging. Delivery is due within 20 days FOB origin to a military recipient in Kaohsiung, Taiwan, with zero variance allowed in quantity. Inspection and acceptance occur at origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. Attributes are to be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The supplier must comply with DLA’s Master List of Technical and Quality Requirements, and configuration changes require an Engineering Change Proposal or variance request. Cybersecurity Maturity Model Certification Level 2 self-assessment is required, and government identification must be removed from non-accepted supplies. Documentation for source approval is mandatory, and the contract is subject to Covered Defense Information provisions. The solicitation number is SPE4A5-26-T-317Z with a response deadline of August 10, 2026, and the required delivery date is August 4, 2026.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
TAIL ROD
Solicitation # SPE7M2-26-T-5944
The contract pertains to the procurement of a TAIL ROD with NSN 1720-00-939-0093, quantity of 13 units, under solicitation SPE7M2-26-T-5944, with a response deadline of August 13, 2026, and delivery expected in 305 days after order award. The item is associated with technical data subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign national employees and subsidiaries of U.S. companies, without prior authorization from the Department of State or Department of Commerce. Access to this controlled data is restricted exclusively to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA. The place of performance is specified as New Cumberland, Pennsylvania, 17070-5002, and the contracting office operates under the Department of Defense’s Nuclear Reactor Program. Primary point of contact is Alisha Blanton, reachable via email and phone provided.
NUCLEAR REACTOR PROGRAM

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-605Y
This contract pertains to a government procurement under solicitation SPE4A7-26-T-605Y for 29 units of an item identified by NSN 0001S00000052, with a delivery deadline of 264 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. The item is subject to export control regulations under either ITAR or EAR, restricting the disclosure of associated technical data to foreign persons wherever located, including foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and access to controlled data is limited to contractors with approved JCP certification, completed DOD export control training, and formal DLA authorization. Packaging must adhere to DLA standards, and configuration changes require an engineering change proposal or variance request. Inspection and acceptance occur at origin, and non-accepted supplies must have government identification removed. The place of performance is Jacksonville, FL, with Hannah Leonard as the primary point of contact, and the solicitation is open to federal entities under NAICS code 336413.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11GX
This contract specifies the procurement of a cable assembly with part number 941292 and NSN 6150-01-678-1631, requiring two units to be delivered within five days of contract award. The items must meet all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, enforcing zero non-conformances unless otherwise stated. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and minor at Level II with an AQL of 4.0; unspecified attributes default to major. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required, and palletization adhering to DLA packaging standards. The items are designated as critical application items and must be physically identified per RQ017. Delivery is FOB origin with a zero variance tolerance, and inspection and acceptance occur at the origin. Documentation for source approval and removal of government identification from non-accepted items must follow specified procedures. The shipment is destined for the Joint Logistics Unit Vic in Bandiana, Australia, with freight handled by the Australian Government Cargo Office via DHL. The contract was issued under solicitation SPE4A6-26-T-11GX with a required delivery date of October 22, 2024, and is classified under NAICS code 335311, managed by the Department of Defense’s ASC Commodities Division.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CLOSE TOLERAN
Solicitation # SPE4A6-26-U-3296
This contract specifies the procurement of a screw with close tolerance, identified by NSN 5305-01-321-6120 and part number NAS1973T26T, manufactured to meet the non-government standard NAS1972 through NAS1980 Revision 7 and NAS4004 Revision 16. The item is classified as a commercial item and a critical application component requiring source inspection, with all threads of class 3A and 3B subject to dimensional verification per System 22 of FED-STD-H28/20, excluding very small internal and external threads. Manufacturing must adhere to the current revision of the applicable standard, and prior revisions are acceptable only for historically produced items. The manufacturing process requires forging, necessitating specialized tooling, and the supplier must comply with SAE AS9100 quality requirements, regardless of whether they are a manufacturer or non-manufacturer. All items must be marked per MIL-STD-130N paragraph 4.1.b(2) in addition to manufacturer logos and material identifiers, and packaged in accordance with MIL-STD-129 and ASTM D3951, with DLA’s Master List of Technical and Quality Requirements taking precedence. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero defect acceptance unless otherwise specified, and attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively for critical, major, and minor characteristics. The contract is a total small business set-aside under NAICS 332722, with delivery due in 108 days FOB origin, no variance permitted in quantity, and inspection and acceptance occurring at the origin. The unit of issue is each, with a quantity of 65 units, and packaging must adhere to DLA’s packaging requirements including palletization standards. The solicitation is managed by the Defense Logistics Agency and is open to responses through the DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, HEXA
Solicitation # SPE4A6-26-T-11GS
A hexagonal plain slotted nut, identified by NSN 5310-00-849-6883, is being procured in a quantity of 14 units under a fully competitive solicitation governed by military and federal specifications. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance taking place at Tinker Air Force Base, Oklahoma, 73145-8000. The solicitation, numbered SPE4A6-26-T-11GS, was posted on August 2, 2026, with responses due by August 10, 2026, and falls under NAICS code 332722 for screw, nut, bolt, and fastener manufacturing. The delivery timeline is set at 89 days after award, and the primary point of contact for inquiries is Vincent Price, reachable via phone or email provided through the Defense Logistics Agency’s DIBBS system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-11CM
The contract is for a special-purpose electrical cable assembly with NSN 6150-01-424-8044, for a quantity of four units, under solicitation SPE4A6-26-T-11CM. The required delivery timeline is 316 days after order, and the solicitation closed on August 10, 2026, with a posted date of August 2, 2026. The item falls under NAICS code 334419 and is procured by the Defense Logistics Agency’s ASC Commodities Division. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Marcita Robinson. The cable assembly is subject to stringent technical and quality requirements referenced from the DLA Master List, and must comply with DLA packaging standards. Surplus supply is explicitly not acceptable, and government identification must be removed from any non-accepted items. The item is governed by cybersecurity and export control policies, including CMMC Level 2 certification requirements for the third-party assessment organization involved, and the application of Covered Defense Information. Technical data associated with the cable assembly is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, including foreign nationals employed by U.S. companies. Access to this controlled data is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and DLA’s questionnaire, and have received explicit approval from DLA authorities. DFARS 252.225-7048 governs the handling of this sensitive technical data.
Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
LIGHT, NAVIGATIONAL,
Solicitation # SPE4A6-26-T-11FH
The contract pertains to the procurement of a commercial off-the-shelf navigational marine light identified by part number 3680283000 and NSN 6220-01-729-1879, with a requirement for four units to be delivered within twenty days from the order date. The item is classified as a critical application item and must comply with all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping materials, and labeling in accordance with MIL-STD-129 with the special marking code “01 - Fragile.” Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the quantity variance is strictly zero percent. The shipment must be sent by the fastest traceable means, explicitly prohibiting parcel post, and is addressed to the Naval Amphibious Base Coronado in San Diego, California, with the freight address and shipment details clearly defined. The contract is issued under solicitation SPE4A6-26-T-11FH with a required delivery date of July 23, 2026, and is governed by DoD authorized unit of issue and acquisition procedures. All supplies must be free of government identification if not accepted, and government use fields indicate specific logistics and distribution codes for internal tracking.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EB
The contract specifies the procurement of a radio frequency cable assembly under solicitation SPE4A6-26-T-11EB, with a quantity of five units to be delivered within 20 days to Naval Station Newport, Rhode Island, FOB origin. All items must comply with stringent technical, quality, and packaging standards outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and must adhere to MIL-STD-2073-1E preservation, MIL-STD-129 marking, and DLA packaging requirements. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. The item is designated as a critical application with source approval requirements and must be traceable throughout delivery, prohibiting parcel post in favor of certified freight methods. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in the product, packaging, preservation, or marking, with limited exceptions for functional components such as batteries or instruments specified by NAVSEA, which must include secondary containment. Packaging must meet palletization guidelines and use only approved materials, with special attention to the prohibition of mercury in any preservation or packing materials. The NSN 5995017220586 is the sole identified material, with a fixed quantity and no variance allowed. Shipments must be directed to the designated military address, labeled appropriately, and delivered by the required delivery date of July 22, 2026. The contract is managed by the Department of Defense’s ASC Commodities Division, with point of contact Ernest Penrose, and the NAICS code 335931 applies to the nature of the product being procured.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-11CQ
The contract pertains to the procurement of one unit of a PIN, RETAINING with NSN 5315-58-002-1217 and part number MUHLD148-831 from HIAB USA INC, issued under solicitation SPE4A6-26-T-11CQ. Delivery is required within 10 days FOB origin to the US Army SSA SUSBDE APS 405TH AFSB at Leutsestraat 34, Zutendaal 3690, Belgium, with inspection and acceptance occurring at the destination. The item is to be packaged in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s standardized requirements, and the unit of issue is EA. Sampling and inspection are governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated in the sample unless otherwise specified, and attributes must be classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. Technical and quality requirements referenced by R or I numbers are incorporated via the DLA Master List, and the revision in effect at the solicitation issue date governs. The required delivery date is June 25, 2026, with no variance allowed in quantity. Transportation and shipping details align with DLAD Proc Notes C19 and C20, and the contract designates W51109 as the RDD and freight address, with government use codes and project identifiers included for tracking.
Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-11FE
The contract pertains to the procurement of three sleeve bearings identified by NSN 3120-01-198-2352 and part number KDJ08C015-241, with delivery required within 169 days to Robins Air Force Base in Georgia. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and manufacturing may involve casting or forging processes, necessitating potential tooling that the government does not necessarily possess; suppliers must submit a Casting and Forging Assistance Request if needed. The bearings must comply with MIL-STD-2073-1E packaging standards, including specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 with no special marking codes applied. Unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. Although item unique identification is not required per the service customer’s request, physical identification and bare item marking are still mandatory. The contract is governed by DFARS clauses and DLA packaging directives, with delivery FOB origin and transportation logistics defined by DLA procedural notes. The sole approved source data includes multiple manufacturers with identical part numbers, and the contract originates from the Department of Defense’s ASC Commodities Division under solicitation SPE4A6-26-T-11FE, responding to purchase request 7012343205 with a need ship date of November 16, 2025, and an original required delivery date of March 25, 2026.
Ball and Roller Bearing Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, RADI
Solicitation # SPE4A6-26-T-11EA
This contract pertains to the procurement of a cable assembly identified as RADI with NSN 5995-01-722-6071 and part number MINIBEND LR-41.00 manufactured by HUBER+SUHNER ASTROLAB, INC. A total of five units are required with a unit price of $5.00, resulting in a total contract value of $25.00, to be delivered within 20 days to the Naval Undersea Warfare Center Division Newport in Rhode Island. Delivery is FOB origin and inspection and acceptance occur at the destination. The item is classified as a commercial off-the-shelf (COTS) product and a critical application item, subject to specific quality and technical requirements referenced from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. Strict packaging regulations apply, requiring compliance with MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking codes needed. Packaging must adhere to DLA requirements, prohibiting any mercury or mercury-containing compounds in preservation, packaging, or labeling, in alignment with NAVSEA 5100-003D, except for specific functional uses in batteries, sensors, or instrumentation. Parcel post is prohibited; shipping must occur via traceable means. The item is not subject to Item Unique Identification per customer request, and all documentation must follow source approval and removal of government identification protocols where applicable. The contract references precise unit of issue standards and requires delivery by July 23, 2026, with procurement governed under solicitation SPE4A6-26-T-11EA and governed by the Department of Defense through the ASC Commodities Division.
Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
KEY, WOODRUFF
Solicitation # SPE4A6-26-T-11HZ
The contract under reference KEY, WOODRUFF, solicitation number SPE4A6-26-T-11HZ, issued by the Department of Defense’s ASC Commodities Division, requires the delivery of 20 units of NSN 5315-01-173-9441 with a delivery deadline of 20 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions or RFP issue date for large acquisitions, unless amended. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Zero non-conformances are required in sampled lots unless otherwise stipulated. Documentation for source approval requests must comply with RC001 standards. The supplier is strictly prohibited from intentionally adding mercury or mercury-containing compounds to any supplied hardware or materials, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents designated by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shock-proof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. All supplies must be marked per physical identification requirements and government identification removed from non-accepted items. The point of contact is Samantha Hopkins, and performance is set in San Diego, CA, with responses due by August 10, 2026.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, BLIND RIV
Solicitation # SPE4A6-26-T-11GF
The contract entails the procurement of 300 units of NUT, PLAIN, BLIND RIV with NSN 5310-01-666-2654 under solicitation SPE4A6-26-T-11GF, with delivery required within 207 days FOB origin. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization specified accordingly. Sampling for quality verification shall follow MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise contracted, with attributes classified per critical, major, or minor levels corresponding to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with hardware except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or Navsea-specified chemical reagents; portable devices with mercury must include shock-proof construction and a secondary containment barrier as per NAVSEA 5100-003D. The product shall be manufactured to TDP Rev C Gen 3 per NAS1738 Rev 6 dated 11/30/2024, and the unit of issue is each (EA) with no variance allowed in quantity. Delivery is to be made to the DLA Distribution facility in New Cumberland, PA, with inspection and acceptance occurring at destination. The contract enforces zero tolerance for non-conforming items, requires full compliance with government identification removal protocols for rejected supplies, and mandates bare item marking per RQ017. The point of contact is Molitauoleava Langi, and the solicitation closed on August 10, 2026, with an original need date of March 6, 2027.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, SHOULDER
Solicitation # SPE4A6-26-T-11GW
The contract specifies the procurement of one shoulder screw, part number SR-16 with NSN 5305-01-549-2013, under solicitation SPE4A6-26-T-11GW, with a required delivery within 20 days from the contract date. The item must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-130N for physical identification marking and MIL-STD-129 for labeling. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are to be classified with designated verification levels or AQLs. The screw must be free of intentional mercury or mercury compounds throughout its manufacturing, packaging, and preservation, except for narrowly defined functional exceptions such as batteries or sensors, and even then must meet NAVSEA containment standards. Packaging must conform to MIL-STD-2073-1E with preservation methods specified, palletization as per DLA requirements, and prohibition of mercury in any preservation or packing materials. Delivery is FOB origin to the USS HYMAN G RICKOVER (SSN 795) in Groton, CT, with shipper required to use the fastest traceable means, explicitly excluding parcel post. The contract requires CMMC Level 2 self-assessment compliance, and all markings, packaging, and documentation must precisely follow government-prescribed formats, with no variance allowed in quantity.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details