Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Z--Bradbury Dam Outlet Valve Replacement

Active
140R2026R0018Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the replacement of existing 30-inch outlet valves at Bradbury Dam, located 20 miles northwest of Santa Barbara, California, to improve the operational efficiency of water releases within the outlet works. This is a firm-fixed-price construction contract under FAR Part 15 with an estimated value between $1 million and $5 million, and it requires the removal of two fixed-cone valves and associated components including actuators, supports, conduits, and wiring, followed by the installation of two new fixed-cone valves with hoods, engineered valve supports grouted and anchored to concrete, butterfly valves, actuators, control wiring, conductors, cables, and grounding systems. A temporary pump system must be designed and deployed to maintain water flow from Lake Cachuma to the spillway during the outage period. All electrical designs must be certified by a U.S.-registered Electrical Engineer, and structural designs must be stamped by a California-registered Professional Engineer. The work is performed entirely on-site at Bradbury Dam, with inspection and acceptance taking place at the place of performance. Offerors must be registered in the System for Award Management (SAM) and represent as a Total Small Business concern under NAICS code 237990, with average annual receipts not exceeding $24 million. A 100% performance bond and 100% payment bond are mandatory for award. The solicitation was posted on July 22, 2026, with proposals due by August 7, 2026, and will be submitted electronically through SAM.gov; no paper submissions are accepted. Though the full technical specifications and drawings will be released with the formal solicitation, the current presolicitation confirms the scope, key deliverables, and mandatory compliance requirements. No contract options, security clearances, or organizational conflict of interest provisions are specified. Payment and invoicing details, accounting information, and specific packaging or marking standards are not provided in the presolicitation and will be defined upon issuance of the full solicitation. The contracting office is the MP-Regional Office of the Department of the Interior in Sacramento, California, with Charlesetta Seibure designated as the primary point of contact.

General Info

Replace two 30-inch valves at Bradbury Dam with new fixed-cone systems, requiring bonds, engineered certifications, and temporary pumping.

Agency

Department Of The Interior → Mp-Regional OfficeView Agency

NAICS

237990 - Other Heavy and Civil Engineering ConstructionView NAICS

Place of Performance

CA

Set-Aside

NONE

Documents

(1)

RFP 140R2026R0010 Bradbury Dam Outlet Valve Replacement

PDFpresolicitation

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhasePresolicitation
Posted

Presolicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Mp-Regional Office
Contacts1 person available
OfficeSACRAMENTO, CA, 95825, USA
Organization / Agency
Department Of The Interior → Mp-Regional Office
View Agency Profile
Office AddressSACRAMENTO, CA, 95825, USA
Contacts

Full Description

Show more
To replace the existing 30-inch valves to enhance the operation and efficiency of water releases within the outlet works.

Similar Contracts

Same NAICS industry code

NAICS: 237990
New
SLED
AIRFIELD 2030 ALL PROJECTS (AIP / AUI / CIRCUITS / FOD) CombinedThe contract encompasses a broad range of airfield infrastructure improvements at the Port of Seattle, focusing on modernization, safety, and operational reliability. Key efforts include replacing aging airfield lighting circuits with low megger readings with new LED fixtures and signs to enhance visibility and energy efficiency. Concurrently, failing pavement sections and critical underground utilities will be removed and replaced to ensure structural integrity and prevent service disruptions. Wildlife hazard mitigation is addressed through the removal of turf edge dams along runways, taxiways, and access roads, installation of anti-perching devices on signage to deter birds, and the regrading of low-lying areas coupled with new storm drainage infrastructure to eliminate ponding that attracts wildlife. Additionally, deteriorating flush fire hydrant access hatches will be replaced to ensure rapid and unimpeded access for emergency response teams. The work is part of the larger AIRFIELD 2030 initiative and falls under NAICS code 237990, with all performance obligations tied to the Port of Seattle’s aviation facilities. The contract is forecasted under the Aviation Project Management Group and will be managed by Yanet Maldonado, the primary point of contact, who can be reached via phone or email for inquiries. There is no formal solicitation number yet, and the contract is currently in the pre-solicitation phase with a posted date of July 23, 2026. No set-aside provisions are specified, and the location of performance is centered on the Port of Seattle’s airfield assets. All components of this project are designed to enhance safety, regulatory compliance, and long-term operational resilience of the airfield infrastructure.
Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

N/A
View Details
NAICS: 237990
New
SLED
2027 Airfield Project - Contract 2The contract, titled 2027 Airfield Project - Contract 2, issued by the Port of Seattle through its Aviation Project Management Group, encompasses a wide range of airfield infrastructure improvements aimed at enhancing safety, efficiency, and compliance. Key tasks include replacing airfield lighting circuits that exhibit low megger readings with new LED lighting fixtures and signs to improve visibility and reduce maintenance costs. Concurrently, failing pavement sections and critical utility systems will be replaced to ensure structural integrity and operational reliability across the airfield. Wildlife hazard mitigation measures are also included, such as the removal of turf edge dams along runways, taxiways, and access roads, installation of anti-perching devices on signage, and the regrading of areas with ponding issues alongside the installation of new storm drainage infrastructure to reduce bird attraction and improve water runoff. Additionally, the project involves replacing deteriorated flush fire hydrant access hatches to ensure rapid and unimpeded access for emergency response. The work is classified under NAICS code 237990 and is forecasted for future award, with the solicitation posted on July 23, 2026. Primary point of contact is Moraa Omwega, reachable via email and phone, with David Neds serving as the Project Manager for technical oversight. The contract is intended for performance at the Port of Seattle’s airfield facilities, though exact location details are not specified in the metadata, and interested parties are directed to the official portal for further details.
Aviation Project Management Group

POSTED

about 7 hours ago

DEADLINE

N/A
View Details

More opportunities from Department Of The Interior → Mp-Regional Office

Same awarding agency

NAICS: 517111
New
Federal
Facilities Access Service for T1 Data Circuit This is a sole-source acquisition for Facilities Access Service to maintain a dedicated T1 Data Circuit connecting Friant Dam in Friant, California, and the Fresno Area Office of the Bureau of Reclamation, ensuring continuous, 24/7 operational communication between the two sites. The contract has a base year running from September 1, 2026, through August 31, 2027, with four potential one-year option periods extending through August 31, 2031. Performance is required at both physical locations, and the contractor is responsible for managing, operating, and maintaining the telecom infrastructure with a strict requirement of 100% uptime. The service is governed by a Performance Work Statement, though its full text is not provided, and compliance with federal and Department of the Interior-specific standards is mandatory, including annual FISSA cybersecurity training, Section 508 accessibility requirements, and IT access protocols. The contract is firm-fixed price and administered by the Department of the Interior’s Mp-Regional Office in Sacramento, California, with payment processed exclusively through the Invoice Processing Platform (IPP) using Electronic Funds Transfer. The solicitation number is 140R2026Q0109, with a response deadline of July 31, 2026, and submissions must be emailed directly to the primary point of contact, Denard Fobbs. Although pricing data is not populated in the CLIN table, indicating potential redaction or an incomplete draft, the NAICS code 517111 applies, with a size standard of 1,500 employees, though no set-aside is designated. Several standard FAR clauses are included with RFO deviations, and non-FAR clauses from the Department of the Interior Acquisition Regulation are incorporated, including unique security, inspection, and contract administration requirements. The contractor must allow unrestricted access for audits and cyber incident reporting, adhere to uniform reimbursement rules, and comply with whistle-blower protections and trafficking in persons prohibitions. The Contracting Officer’s Representative holds technical oversight authority but cannot alter contract terms; any perceived overreach must be notified to the Contracting Officer within five working days. Only the Contracting Officer may obligate funds or modify the contract, and all representatives must be formally designated in writing. Participation requires active SAM.gov registration and submission of proposals via email, with no formal evaluation factors beyond price reasonableness and unbalanced pricing analysis, reflecting a trade-off award methodology where value beyond cost may
Wired Telecommunications Carriers

POSTED

1 day ago

DEADLINE

in 8 days
View Details
NAICS: 327215
New
Federal
56--CCAO Pavilion Insulated Glass The Bureau of Reclamation’s Central California Area Office is seeking industry input through a sources sought notice for the fabrication and delivery of eight custom insulated glass units for installation into a 24-foot by 50-foot timber pavilion at Folsom Dam, located at 7794 Folsom Dam Road, Folsom, CA. The glass units must be fabricated to field-verified dimensions, not drawings, with a minimum of one-half inch clearance on all sides to allow for structural expansion and movement. Each unit must consist of a 1-inch overall thickness of fully tempered insulated glass, configured as a 1/4-inch Low-E 355 lite on the exterior and a 1/4-inch clear glass lite on the interior, in compliance with NAICS code 327215. Contractors must be capable of performing accurate on-site measurements and delivering the units within 30 days of order receipt, though no delivery terms such as FOB or shipping responsibility are specified. This notice is not a formal solicitation or contract; it is a market research tool to assess industry capability and does not obligate the government to award a contract or include binding FAR clauses. Responses are to be submitted as capability statements via email to Margaret Jones at margaret_jones@ios.doi.gov by June 12, 2026, at 10:00 a.m. Pacific Time, and must include information on fabrication experience, field measurement proficiency, delivery logistics, and business size certification under the 1,000-employee small business standard, though no formal socioeconomic certifications such as HUBZone or 8(a) are required. No Unique Entity ID or CAGE code submission is mandated, and no invoice processing or payment office details are provided. Drawings labeled BU-2 and a front-view photograph labeled A are available for reference but are not to be used as construction specifications. The contracting office is based in Sacramento, CA, and Margaret Jones serves as the point of contact for responses but is not designated as a contracting officer or technical representative.
Glass Product Manufacturing Made of Purchased Glass

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
Federal
T--CGB-400 IMT GIS Technical Service SupportThe contract supports Geospatial Information Systems (GIS) technical services for the Bureau of Reclamation’s California Great Basin Region under the CGB-400 IMT GIS Technical Service Support solicitation, issued as a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside under NAICS code 541611. The scope encompasses operation of the CGBGIS Service Center, development and maintenance of regional and enterprise-wide spatial databases, software and application development, data acquisition, end-user support, and systems management using ESRI GIS platforms, GPS, and Computer-Aided Drafting tools. The contract employs a hybrid Firm Fixed Price and Time and Materials structure, with travel costs capped at $44,800 annually and no stated ceiling for the core GIS and systems management services. Performance spans a one-year base period with two optional one-year extensions, and work is primarily performed at the U.S. Bureau of Reclamation’s Sacramento location, though travel to remote GIS meetings or training events may occur with prior approval. Contractors must comply with strict security protocols including National Agency Check (NAC) clearance, compliance with the Reclamation IT Security Program and HSPD-12/FIPS 201 standards for Personal Identity Verification (PIV) cards, which must be worn at all times on federal premises. Employees may also be required to sign non-disclosure agreements for sensitive assignments. Performance is rigorously monitored through a Quality Assurance Surveillance Plan that enforces acceptable quality levels, requiring biweekly and monthly reports and invoices to be submitted on time 98% of the time, 100% of invoices to include full supporting documentation, and technical staff to correctly answer 95% of GIS-related inquiries. The Contracting Officer’s Representative conducts ongoing surveillance and mid-term evaluations, while contractors may submit written self-assessments. Payment determinations are made by the Contracting Officer within 45 days of each evaluation period, with potential disincentives applied for performance failures, and invoicing occurs monthly alongside bimonthly labor reports. All deliverables are submitted to the COR at the Sacramento office, and contractors must maintain valid automobile insurance and professional conduct standards, with immediate action required for any complaints against personnel.
Administrative Management and General Management Consulting Services

POSTED

6 days ago

DEADLINE

in 14 days
View Details
NAICS: 237990
Federal
Z--Folsom Dam Warehouse Bridge Crane ReplacementThe contract calls for the design, construction, furnishing, and installation of a new 30-ton bridge crane to replace the existing unit in the Folsom Dam Warehouse, ensuring continued operational capability for material handling tasks. The project is being pursued as a Sole Source procurement under the SDVOSB category, indicating the contract is reserved for a Service-Disabled Veteran-Owned Small Business with no competitive bidding anticipated. The North American Industry Classification System code 237990 classifies this effort under other heavy and civil engineering construction, aligning with the specialized nature of the crane replacement. The solicitation, identified by number 140R2026R0017, was posted on July 16, 2026, with a response deadline of September 1, 2026. The contracting office is the Mp-Regional Office under the Department of the Interior, located in Sacramento, California, with Stephanie Lindner serving as the primary point of contact for inquiries. Performance of the work will occur at the Folsom Dam Warehouse, though specific location details beyond the facility are not provided. The contract is currently in presolicitation status, meaning stakeholders are being notified ahead of formal procurement activity, and all work must be executed in accordance with federal procurement guidelines applicable to the Interior Department’s infrastructure projects.
Other Heavy and Civil Engineering Construction

POSTED

7 days ago

DEADLINE

in about 1 month
View Details
NAICS: 237990
Federal
Bradbury Dam Outlet Valve ReplacementThe Bradbury Dam Outlet Valve Replacement contract aims to enhance water release operations by replacing existing 30-inch valves with two new fixed-cone valves and accompanying equipment including hoods, butterfly valves, reducers, actuators, conductors, conduit, and grounding systems. Work will also involve installing a temporary pump system to maintain water supply during outages and designing two certified valve supports by a California-registered Professional Engineer. The project spans multiple construction divisions including concrete, metals, finishes, electrical, and waterway and marine construction, and must comply with ASME, ASTM, IEEE, NETA, NFPA, and RSHS standards. All materials must be stored and handled under strict environmental controls—temperature between 50°F and 95°F, protected from moisture, UV light, and weather—and must not exceed manufacturer shelf life. Packaging must remain original and unopened, with containers not exceeding 5 gallons unless suitable handling equipment is available. All containers and fasteners require clear, permanent labels including manufacturer name, product name, batch number, date of manufacture, and special instructions; cable and valve tags must have white backgrounds with black text, a minimum 7pt font size for markers and 16pt for tags, and be made of non-conductive, heat-resistant, non-corroding materials. Inspection and acceptance occur exclusively at the jobsite, governed by FAR 52.246-12, and include rigorous quality controls such as Dry Film Thickness verification per SSPC PA2, holiday testing per NACE SP 0188, and adhesion testing per ASTM D4541 as directed by the Contracting Officer’s Representative. Compliance with corrosion protection standards like ASTM A123 and ASTM A153 is required for coated materials, while welding must meet ASME BPVC-IX. Contractors must submit a comprehensive Safety Program approved prior to work commencement, including SOPs for confined space entry, working at heights, and hazardous material use. The Safety Professional must hold CSP, ASP, OHST, or CHST certification with at least three years of relevant experience, and the Contractor must provide an Onsite Safety Representative. Valley Fever awareness training is mandatory for all workers due to the location in endemic California counties, with annual renewal required under state law. The Government retains authority to issue stop orders for safety violations with no entitlement to time or cost adjustments, and may require a full-time Safety Professional at no additional cost if performance is inadequate. Material substitutions require written government approval and may trigger
Other Heavy and Civil Engineering Construction

POSTED

7 days ago

DEADLINE

in 18 days
View Details