Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Bell Boeing Joint Project Office 47123 Buse Road PATUXENT RIVER MD 20670 USA

UEI: SLED_8FC8FE7A9C2C1C04

Bell Boeing Joint Project Office 47123 Buse Road PATUXENT RIVER MD 20670 USA is a federal contractor, registered under UEI SLED_8FC8FE7A9C2C1C04. It has been awarded $1,413,735 in federal contracts. Primary work spans Hand and Edge Tool Manufacturing. Top awarding agencies include Department Of Defense.

Contact Information

Registration and classification details

Registration

UEI Code

SLED_8FC8FE7A9C2C1C04

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

AI Capability Profile

Bell Boeing Joint Project Office specializes in the design and procurement of peculiar support equipment. Their technical expertise focuses on the development of specialized tooling and maintenance hardware required for the sustainment of complex aerospace components, specifically the MV/CV-22 propr...

Key Performance Metrics

Awards Count

1

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Department Of Defense$1.4M100%

Awards by NAICS

332212 - Hand and Edge Tool Manufacturing$1.4M100%

Awards by Agency Over Time

Awards by Place of Performance

Compete with Bell Boeing Joint Project Office 47123 Buse Road PATUXENT RIVER MD 20670 USA

Track the contractors you bid against, and the work they win

Award history, agency mix, and NAICS coverage for Bell Boeing Joint Project Office 47123 Buse Road PATUXENT RIVER MD 20670 USA

AI-powered matching against your own capabilities and past performance

Teaming and subcontracting signals on every award

Automated alerts when a competitor wins in your market

Join 750+ contractors already using CLEATUS

Open opportunities in Bell Boeing Joint Project Office 47123 Buse Road PATUXENT RIVER MD 20670 USA's top NAICS codes and agencies

P-25A Hand Pump Kits

Solicitation # N68335-27-Q-1035

Navair Warfare Ctr Aircraft Division

POSTED

about 10 hours ago

DEADLINE

Next Generation Bomb Hoist

Solicitation # N6833526R1012

Solicitation N6833526R1012 is a request for proposals issued by the NAVAIR Warfare Center Aircraft Division for a fixed-price Indefinite Delivery Indefinite Quantity (IDIQ) contract to manufacture and deliver Next Generation Bomb Hoist (NGBH) support equipment. The scope of work includes the production of four Pilot Production Units and an estimated 940 Full Rate Production Units over a five-year period, alongside associated technical data and reports. The procurement is a total small business set-aside, requiring both the prime contractor and all subcontractors to be small businesses without exception. Award will be based on a best-value trade-off process, prioritizing technical capability and past performance over price. Key technical requirements include compliance with the Technical Data Package, welding certifications, and the ability to manufacture a designated Critical Safety Item cable assembly. Additionally, CMMC Level 2 self-certification is a material condition of award. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by November 2, 2026, organized into separate technical, past performance, and price volumes.

Navair Warfare Ctr Aircraft Division

POSTED

about 10 hours ago

DEADLINE

MATS Functional Test Set (FMS)

Solicitation # N6833526Q1183

The Naval Air Warfare Center Aircraft Division is soliciting quotes for a Firm-Fixed-Price contract to manufacture, assemble, inspect, and deliver one MATS Functional Test Set (Part Number 90249, NSN 4920-01-566-8231). This Intermediate Level Peculiar Support Equipment is required to support the V-22 aircraft program, specifically for the Japan Ground Self-Defense Force MV-22B Block C program via Foreign Military Sales. The solicitation, originally numbered N6833526Q1183 and updated to N68335-27-Q-1021, is a 100 percent Small Business Set-Aside under NAICS code 334519. Delivery is required within 26 weeks from the date of award, with inspection and acceptance occurring at the origin. To access the export-controlled Build-to-Print Technical Drawing Package, which contains Controlled Unclassified Information, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 Self-Assessment certification. Award will be granted to the responsible offeror proposing the lowest evaluated price who meets all technical and non-price requirements, including ISO9001 certification and a satisfactory past performance rating in the Supplier Performance Risk System. Proposals must be submitted electronically via email and must include CMMC unique identifiers for any systems processing federal contract information or controlled unclassified information. Packaging and marking must adhere to MIL-STD-129R and MIL-STD-130 standards, with a strict prohibition on loose fill materials and asbestos.

Navair Warfare Ctr Aircraft Division

POSTED

about 10 hours ago

DEADLINE

Adapter, Hellfire Missile (Upper) and Adapter, Hellfire Missile (Lower)

Solicitation # N6833526Q1186

The Naval Air Warfare Center Aircraft Division (NAWC-AD) is soliciting quotes for a Firm Fixed Price contract to procure 20 units of Upper Hellfire Missile Adapters (Part 1517AS106-1) and 20 units of Lower Hellfire Missile Adapters (Part 1517AS107-1), along with associated technical data. These items support the AH-1Z and UH-1Y Foreign Military Sales case for the Czech Ministry of Defense. This procurement is a 100% Small Business Set-Aside under NAICS code 336419. The final deadline for submission is November 10, 2026, with all proposals required to be submitted electronically to the point of contact, Juan Carlos Belmonte. Award will be granted based on the Lowest Price Technically Acceptable (LPTA) method. To be considered technically acceptable, offerors must be a certified small business, provide pricing for all CLINs, and commit to a delivery schedule of 90 calendar days after the award date. Due to the presence of Controlled Unclassified Information (CUI) and export-controlled technical data, offerors must provide a certified DD Form 2345 and proof of CMMC Level 2 self-assessment via the Supplier Performance Risk System (SPRS) to access the technical data packages. Additionally, the contract requires strict adherence to MIL-STD-129 and MIL-STD-130 for packaging, marking, and unique item identification. Shipping is quoted as FOB Origin, with hardware delivery to Gulfport, Mississippi, and technical data delivery to Joint Base MDL, New Jersey.

Navair Warfare Ctr Aircraft Division

POSTED

about 10 hours ago

DEADLINE

HIGH LIFT ADAPTER ADU-954/E, Outriggers, Push Up Adapter

Solicitation # N6833526R1091

Solicitation N68335-26-R-1091 is a Small Business Set Aside for a five-year Indefinite Delivery Indefinite Quantity (IDIQ) fixed-price contract to manufacture and deliver peculiar support equipment for the F/A-18E/F and EA-18G programs. The scope of work includes the production of High Lift Adapter Outriggers (P/N 4097AS265-1), Push Up Adapters (P/N 4097AS200-1), and MHU-191 Munitions Loaders (P/N 3992AS100-1), along with associated Proof Load Certificates. These items are destined for the US Navy, with delivery to Lakehurst, and the Royal Australian Air Force, with delivery to a freight forwarder in California. All equipment must be new, covered by a manufacturer warranty, and adhere to strict marking and packaging standards, including MIL-STD-130, MIL-STD-129R, and ASTM D3951-18. Award will be determined using a best-value trade-off process weighing price and delivery lead time as approximately equal factors. To be technically acceptable, offerors must be registered small businesses in SAM.gov, propose a delivery schedule of eight months or less, and provide a detailed delivery narrative. Critical compliance requirements include CMMC Level 2 certification and a current NIST SP 800-171 assessment recorded in the Supplier Performance Risk System. Proposals must include comprehensive cost and pricing data, with certified data required for thresholds exceeding 10 million dollars. All submissions are due by November 23, 2026, to the designated point of contact.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Anchor Tiedown Weldment

Solicitation # N68335-26-Q-1184

The Naval Air Warfare Center Aircraft Division intends to award a sole source contract to Vital Link, Inc. for the procurement of two Anchor Tiedown Weldments, part number 602145-01. These hardware components are essential for the maintenance of F-414 engines within test cells as part of the Kuwait F/A-18 E-F Super Hornet Program. The selected vendor is responsible for the fabrication and pull testing of the weldments to ensure operational readiness. Vital Link, Inc. has been identified as the only capable source due to its status as the original equipment manufacturer and its possession of the necessary technical data. This procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. While this is not a request for competitive proposals, the government will consider responses within fifteen days of publication, provided the respondent is registered in the System for Award Management.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

PERISHABLE TOOLING FOR OUTER WING PANEL (OWP) AILERON HINGE REPLACEMENTS

Solicitation # N68335-27-Q-1003

The Naval Air Warfare Center Aircraft Division in Lakehurst, New Jersey, intends to award a sole source contract to J&S Tool, Inc. for the procurement of perishable tooling required for Outer Wing Panel aileron hinge replacements. This tooling supports the F/A-18 E/F and EA-18G aircraft and must be manufactured, assembled, inspected, and delivered in accordance with specific repair instructions and part numbers. Although The Boeing Company is the original equipment manufacturer, a licensing agreement allows the government to purchase these specific components directly from approved suppliers. Consequently, the government is utilizing the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1 to negotiate directly with J&S Tool, Inc. as the only responsible source capable of satisfying the requirement.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

BRACE, AIRCRAFT GROUND SERVICING

Solicitation # N68335-26-Q-1194

The Naval Air Warfare Center Aircraft Division intends to negotiate a sole source contract with Northrop Grumman Systems Corporation for the procurement of four aircraft ground servicing braces. These components, identified by part number 74D110613-1007 and national stock number 1730-01-473-3572, are required to support the Royal Australian Air Force F/A-18F and EA-18G program. The braces are critical for maintaining operational readiness, as they secure the stabilizer in a trim or specific leading-edge-down position during essential maintenance tasks such as engine or stabilizer replacement. Northrop Grumman is designated as the sole source for this requirement because, as the original equipment manufacturer, they possess the necessary technical data and production experience. The procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. The equipment features a specialized tension bolt designed to fail during overload conditions to prevent aircraft damage. This presolicitation is managed by the Department of Defense with performance taking place in Lakehurst, New Jersey.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Multi-Spectral Test Set (MSTS) Assessment, Evaluation, Inspection, and Repair Services

Solicitation # N68335-27-RFI-1016

The Naval Air Warfare Center Aircraft Division intends to establish a sole-source Basic Ordering Agreement for the assessment, evaluation, inspection, and repair of Multi-Spectral Test Sets, specifically part numbers EU04618-01-FG and EU04618-02-FG, to support the CV-22 aircraft variant. The government intends to award this contract to Textron Systems Corporation, as they are the original equipment manufacturer and hold the proprietary data rights and technical data package for the equipment. This procurement falls under NAICS code 811219 and Product Service Code J066. This notice serves as a sources sought market research tool and is not a request for proposal. While the government intends to proceed with a single source under statutory authority, interested parties may submit capabilities statements for consideration. There is no current commitment to issue a solicitation or award a contract, and the government will not provide payment for any information or responses received during this research phase.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

1553 Data Bus Test Cable Set, PN: 3239AS1510-1, NSN: 4920-01-505-5149; FMS Czech & Nigeria

Solicitation # N68335-27-Q-1018

The Naval Air Warfare Center, Aircraft Division, intends to award a competitive Firm Fixed Price contract for the procurement of two 1553 Data Bus Test Cable Sets, part number 3239AS1510-1. This equipment is designated as Peculiar Support Equipment to support the AH-1Z and UH-1Y programs under Foreign Military Sales for the Nigerian Air Force and the Czech Ministry of Defense. This opportunity is a total Small Business Set Aside under NAICS code 334419, identified by solicitation number N68335-27-Q-1018. While this notice serves as a presolicitation synopsis and not a formal request for proposal, interested vendors should monitor the SAM website for the official solicitation and any subsequent amendments.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Portable Oxygen Regulator Test Stand

Solicitation # N68335-27-Q-1033

The Naval Air Warfare Center Aircraft Division intends to award a non-competitive contract to Aerospace Control Products, Inc. for one Portable Oxygen Regulator Test Stand, part number 3949AS100-3. This procurement is part of a Foreign Military Sales case for the Japan Air Self Defense Force E-2D program. The government is utilizing a sole-source justification because Aerospace Control Products, Inc. is the only designer and manufacturer with the proprietary technical data and rights necessary to meet the specific standardization requirements of the Japanese partner. This presolicitation notice, identified by solicitation number N68335-27-Q-1033, was posted on October 22, 2026. While the government intends to proceed on a non-competitive basis, responsible sources may submit capability statements or quotations by the deadline of November 6, 2026. The primary point of contact for this action is Desiree Pendleton.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

DLA Land And Maritime

POSTED

DEADLINE

Aircraft Pressurized Cabin Leakage Tester (APCLT)

Solicitation # N68335-26-Q-1204

The Naval Air Warfare Center Aircraft Division intends to negotiate a sole source contract with Hydraulics International, Inc. for the procurement of one Aircraft Pressurized Cabin Leakage Tester. This equipment, identified by part number 4129AS0100-1 and national stock number 4920-01-658-2036, is essential for the Royal Australian Air Force Program supporting F/A-18F and EA-18G aircraft. The portable unit utilizes facility compressed air to test canopy seals and pressurized cabins for leaks and pressure regulation capabilities, which is critical for maintaining operational readiness. Because Hydraulics International, Inc. is the original equipment manufacturer, the government has determined they are the only source with the necessary technical data and experience to provide the system. This procurement is being conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.302-1. The requirement falls under NAICS code 334513 and PSC code 4920, with performance taking place in Lakehurst, New Jersey.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

Shipboard Power Systems and Mechanical Interface AnalysisThis small business set-aside subcontract with the Navair Warfare Ctr Aircraft Division involves providing specialized analysis of shipboard power systems and mechanical interface issues for Support Equipment projects at NAWCAD Lakehurst. The scope of work focuses on evaluating electrical power compatibility and distribution on shipboard platforms, while providing critical assistance for Integrated Logistics Support certifications. The selected contractor will be responsible for delivering detailed interface analysis reports and supporting documentation for ILS certifications. Due to the nature of the work, a Secret security clearance is required. The response deadline for this opportunity is December 3, 2026.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

in about 1 month

SE Engineering Drawing and Documentation ServicesThis subcontract opportunity, titled SE Engineering Drawing and Documentation Services, supports prime contractors on NAWCAD Lakehurst SE projects for the Department of Defense. The selected provider will be responsible for creating and revising engineering drawings using AutoCAD and Pro-Engineering Modules, preparing test procedures, and managing data within SEMS and Naval Air Technical Data systems. Key deliverables include finalized technical manuals and engineering drawing packages. The contract is designated as a Total Small Business Set Aside under NAICS code 541370. Due to the nature of the work, personnel are required to maintain a Secret security clearance. Interested parties must submit their responses by December 3, 2026, for performance located in zip code 08733.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

in about 1 month

RM&S and Environmental Compliance ConsultingThis small business set-aside subcontract involves providing Reliability and Maintainability as well as Environmental, Safety, and Occupational Health compliance services for prime contractors supporting the Naval Air Warfare Center Aircraft Division at Lakehurst. The scope of work includes evaluating RDEMO tests and FRACAS reports, performing NEPA compliance analyses, and drafting Programmatic Environmental Safety and Health Evaluations. Key deliverables for the project consist of detailed FRACAS reports, RDEMO evaluations, and comprehensive environmental safety and health documentation. Personnel assigned to this contract must possess a Secret security clearance to perform the required duties. The opportunity is categorized under NAICS code 541620 and is managed under the Department of Defense. Interested parties must adhere to the response deadline of December 3, 2026, for this specialized consulting engagement.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

in about 1 month

SE/ALRE Prototype Hardware ManufacturingThe SE/ALRE Prototype Hardware Manufacturing subcontract involves the production and supply of prototype hardware and specialized hi-shock testing fixtures for prime contractors supporting NAWCAD Lakehurst Tri-Service Systems, SE, and ALRE projects. Utilizing precision machining and prototype fabrication tools, the selected provider will transform engineering designs into physical hardware and test fixtures. Due to the nature of the work, a Secret security clearance is required for performance. This opportunity is issued by the Department of Defense under the Navair Warfare Ctr Aircraft Division and is designated as a Total Small Business Set Aside. The contract falls under NAICS code 332710, with the place of performance located in zip code 08733. Interested parties must submit their responses by the deadline of December 3, 2026.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

in about 1 month

SE/ALRE Design and Development EngineeringThe SE/ALRE Design and Development Engineering subcontract involves providing specialized mechanical and electrical engineering services for prime contractors supporting the Navair Warfare Ctr Aircraft Division at NAWCAD Lakehurst. The scope of work focuses on Support Equipment and Aircraft Launch and Recovery Equipment projects, requiring the execution of trade studies, form-fit-function analyses, and the creation of static and dynamic Finite Element and Finite Difference models. Technical proficiency in AutoCAD, ORCAD, LABVIEW, PRO-Engineering, and PRO-Mechanical is essential for delivering the required design reports, engineering drawings, and verified models. This opportunity is designated as a Total Small Business Set Aside under NAICS code 541330. Due to the nature of the Department of Defense projects, all personnel must possess a Secret security clearance. The performance of work is centered in the 08733 zip code area, with a response deadline established for December 3, 2026.

Navair Warfare Ctr Aircraft Division

POSTED

DEADLINE

in about 1 month