Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

COMMERCIAL ROOFING CONSULTANTS INC

UEI: RLK9JSL7KJY6

COMMERCIAL ROOFING CONSULTANTS INC is a federal contractor, registered under UEI RLK9JSL7KJY6. It has been awarded $89,726 across 2 federal contracts. Primary work spans Roofing Contractors and Analytical Laboratory Instrument Manufacturing. Top awarding agencies include Department Of Transportation and Department Of The Interior.

Contact Information

Registration and classification details

Registration

UEI Code

RLK9JSL7KJY6

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

0

All time

Active

0

Currently performing

Completed

0

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Department Of Transportation$88.2K98.3%

Department Of The Interior$1.5K1.7%

Awards by NAICS

238160 - Roofing Contractors$88.2K98.3%

334516 - Analytical Laboratory Instrument Manufacturing$1.5K1.7%

Awards by Agency Over Time

Awards by Place of Performance

Open opportunities in COMMERCIAL ROOFING CONSULTANTS INC's top NAICS codes and agencies

Roofing and WaterproofingThe contract pertains to the installation of roofing membranes, flashings, and waterproofing systems as part of the building envelope for a project located in Tracy, California, with a zip code of 95304-5000. It is classified as a subcontract under NAICS code 238160, which corresponds to roofing contractors, and is issued by the DLA Dist San Joaquin under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 17, 2026, indicating a short turnaround for potential subcontractors to submit proposals. The scope of work centers on ensuring the integrity of the building’s exterior envelope through specialized waterproofing and membrane application techniques, critical for long-term structural protection and compliance with defense facility standards. There is no specified set-aside designation, meaning the opportunity is open to all eligible subcontractors regardless of business size or classification.

DLA DIST SAN JOAQUIN

POSTED

about 10 hours ago

DEADLINE

Procurement and Supply of Electric Soldering Irons

POSTED

about 10 hours ago

DEADLINE

Precision Measurement Equipment Supply

POSTED

about 10 hours ago

DEADLINE

Supply of Electric Soldering Irons (NSN: 3439016532189)The contract involves the procurement and delivery of 94 commercial off-the-shelf electric soldering irons identified by NSN 3439016532189, required to meet specific brand, packaging, and technical standards set by the Defense Logistics Agency. These items are intended for use by the Department of Defense through its DDSP NEW CUMBERLAND FACILITY, with performance to be fulfilled at the location in NEW CUMBERLAND, Pennsylvania, ZIP 17070-5002. The solicitation is issued as a subcontract under NAICS code 334516, indicating classification within electronic component and product manufacturing. The opportunity was posted on August 5, 2026, with a firm response deadline of August 17, 2026, at 17:00 UTC, requiring vendors to submit proposals that comply with all technical and administrative requirements outlined by the agency. Though no set-aside designation is specified, the procurement is open to eligible contractors capable of fulfilling the quantity and conformity criteria without deviation.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

LEVEL, PRECISION, MASTER

Solicitation # SPE8E5-26-T-3799

This contract, issued under solicitation SPE8E5-26-T-3799 by the Department of Defense through DLA Distribution Depot Hill, specifies the procurement of 11 units of material identified by NSN 5220-01-094-4673 and part number 2117276-001, supplied by BAE Systems National Security. The unit price is $11.00 per EA, with a total price of $121.00, and delivery is required in 167 days FOB origin at Hill AFB, Utah. Inspection and acceptance both occur at destination, with zero variance allowed in quantity. The items must be packaged in compliance with ASTM D3951, but all requirements from the DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129 and palletization per RP001. Government identification must be removed from non-accepted supplies, and all packaging must align with MIL-STD-130N for identification marking. The contract includes specific transportation instructions per DLAD Proc Notes C19 and C20, with the designated shipping address and parcel post address clearly defined. The contract references Covered Defense Information under RD003 and incorporates technical and quality requirements identified by R or I numbers from the DLA Master List, with the applicable revision determined by the solicitation issue date for large acquisitions. The unit of issue is EA, and the procurement follows DoD authorized standards, with ANSI X12 equivalents accessible via a provided URL. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, under NAICS code 334516. The primary point of contact is Brandon Wicker, reachable via email and phone. The original required delivery date is March 24, 2027, with a need ship date of February 1, 2027, and all performance is governed by the contractual terms, including the specified delivery location, inspection protocols, and packaging directives governed by DLA standards.

POSTED

about 10 hours ago

DEADLINE

GAGE, PLUG, PLAIN CYL

Solicitation # SPE8E9-26-T-3308

This contract is for the procurement of 13 plain cylindrical plug gages, identified by NSN 5220-00-981-7124 and part number 5431-14 from WINCHESTER INTERCONNECT CORPORATION, under solicitation SPE8E9-26-T-3308. The item is classified as a critical application item and must comply with stringent technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the gages unless explicitly exempted for functional uses like batteries, sensors, or instruments specified by NAVSEA, and any permitted mercury-containing components must include shockproof design and a secondary containment as per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific preservation, wrapping, and container standards, and labeling must follow MIL-STD-129 without special markings. Delivery is FOB origin, with inspection and acceptance occurring at destination, and the quantity variance is strictly zero percent. The required delivery date is 167 days after award, with an original need date of February 5, 2027, and the items must be shipped to the DLA Distribution Center in New Cumberland, Pennsylvania. The contract enforces all applicable DLA packaging and transportation directives, including RP001 and DLAD Proc Notes C19 and C20, and the unit of issue is each, priced at $13.00 for a total value of $169.00.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 10 hours ago

DEADLINE

Fishermen's Terminal C-15 Building ImprovementThe Port of Seattle through its Waterfront Project Management division is forecasting improvements to Building C-15 at Fishermen’s Terminal, focusing on critical infrastructure upgrades. The scope includes replacing the existing roof gutters, repairing or replacing selected rooftop vents, installing 151 new windows, rehabilitating the building’s cladding, and repairing the tower structure. These enhancements aim to improve structural integrity, weather resistance, and overall functionality of the facility. The project is categorized under NAICS code 238160, indicating it falls within the roofing subcontracting sector, and is being managed directly by the Port. Primary point of contact for the solicitation is Valarie Jarvi, reachable via phone or email, with Rod Jackson serving as the Project Manager. The forecast was posted on July 31, 2026, and while no solicitation number or set aside details are provided at this stage, interested parties are directed to the Port’s official procurement portal for updated information. The work will take place at Fishermen’s Terminal, with no specific city or state details listed beyond the location’s identity. All communications and future documentation will be handled through the Port’s internal systems and contact points identified.

Waterfront Project Management

POSTED

about 10 hours ago

DEADLINE

Terminal Envelope Upgrade - Roof Replacement Project (DBB)The Port of Seattle’s Aviation Facilities & Infrastructure division is preparing to undertake a roofing replacement project at a terminal facility, targeting the demolition and removal of approximately 13,600 square feet of existing roofing membrane and insulation, along with the associated flashing and roof drains. The project will involve complete removal and installation of a new roofing system to ensure structural integrity and weather resistance, with work scoped to include all related components critical to proper drainage and sealing. This initiative falls under NAICS code 238160, indicating it is a roofing contract, and is being managed as a design-bid-build procurement under the Terminal Envelope Upgrade program. The solicitation is listed as a forecast with a posted date of July 31, 2026, and is not currently open for bids, but interested parties should monitor the official portal for formal release. Primary contact for inquiries is Angela Peterson, reachable via phone or email, with John McWilliams serving as the project manager for technical coordination. Although specific location details are not provided in the data, the work will occur at a Port of Seattle aviation facility, and all performance activities are expected to align with federal and local building standards. No set-aside provisions are indicated, suggesting the contract is open to all eligible contractors.

Aviation Facilities & Infrastructure

POSTED

about 10 hours ago

DEADLINE

Pier 69 Third Floor Terrace RepairThe contract entails the complete demolition of the existing roof system on the third floor east terrace at Pier 69, including removal of pavers, drainage mat, and waterproof membrane. It requires installation of a new roof system using a pedestal-supported design with thinner pavers to improve drainage efficiency and prevent water accumulation. A new barrier wall will be constructed and installed around the structural steel beams to protect them from future corrosion caused by moisture exposure. All materials removed during demolition, including planters and other components, must be carefully staged and reinstalled using a crane due to their size and weight. The work is scoped to ensure long-term durability and performance of the terrace structure while meeting drainage and structural integrity standards. The project is managed by the Port of Seattle through its Waterfront Project Management division and is classified under NAICS code 238160 for roofing contractors. The solicitation was posted on July 31, 2026, and is currently in forecast status with no set-aside type specified. Primary point of contact is Todd Rehm, reachable at 206-491-2899 or rehm.t@portseattle.org, with Samuel Hansen serving as the project manager. The full details and documentation are available through the Port of Seattle’s online solicitation portal, though no physical address or geographic specifics beyond Pier 69 are provided in the data.

Waterfront Project Management

POSTED

about 10 hours ago

DEADLINE

T91 Cruise Building A2 Roof ReplacementThe Port of Seattle through Waterfront Project Management is forecasting a comprehensive roof replacement project for Terminal 91 Building A2, with the NAICS code 238160 indicating specialization in roofing contractors. The solicitation is set to be released in the future, as indicated by the posted date of July 31, 2026, and is currently in a forecast status with no solicitation number assigned yet. The project involves the full removal and installation of a new roofing system at the designated terminal building, requiring significant construction expertise and compliance with local and industry standards for durability, weather resistance, and safety. The point of contact for inquiries is Angela Peterson, identified as the Port Contact, with Rod Jackson listed as the Project Manager, both reachable through direct phone lines and official email addresses provided by the Port of Seattle. All work is expected to occur at Terminal 91 Building A2, with no additional location details specified in the record, and potential bidders are encouraged to monitor the provided UI link for future updates and正式 solicitation documents.

Waterfront Project Management

POSTED

about 10 hours ago

DEADLINE

Dormitory Roof Replacement in Iowa

Solicitation # dormitory-roof-replacement-iowa

The Ottumwa Job Corps Center is seeking qualified roofing contractors to replace the existing mechanically attached TPO roofing system on Building 7 Dormitory in Ottumwa, Iowa, covering approximately 16,250 square feet of roof area and 1,600 square feet of parapet wall assemblies. Contractors must evaluate the current roof and propose either a complete tear-off and replacement or a recover system, with a detailed technical rationale for the chosen method. The new roofing system must consist of a fully adhered single-ply membrane, either EPDM or TPO, installed with polyisocyanurate and tapered insulation to ensure positive drainage, a high-density cover board, and compliant perimeter edge securement, metal flashing, coping systems, and penetration flashings. Roof drains, overflow drains, and scuppers must be modified as needed, and walk pads are required at all service and access points. Parapet wall repairs must address deteriorated sealants, flashings, terminations, coping, loose wall materials, and supporting masonry. All work must comply with current IBC and ASCE 7 wind design standards and ANSI/SPRI ES-1 edge securement requirements. The roofing system must be installed by a manufacturer-certified installer to qualify for a minimum 20-year No Dollar Limit manufacturer warranty, alongside a separate 2-year contractor workmanship warranty. The project is subject to the Davis-Bacon Act, requiring compliance with prevailing wage rates and certified payroll reporting for all laborers and mechanics, including subcontractors. Proposals must include an itemized breakdown of materials and labor, manufacturer and installer credentials, warranty details, proposed construction schedule, and any bid exclusions or assumptions. The solicitation is reserved for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses under NAICS code 238160, with bids due by August 20, 2026. Point of contact for inquiries is Michelle Hayes, with Doug Richards also available for support.

Ottumwa Job Corps

POSTED

about 11 hours ago

DEADLINE

Roofing System InstallationThis contract is for the installation of commercial roofing systems, encompassing underlayment, insulation, and either membrane or metal roofing materials, specifically under a Small Business Set Aside designation for total award. The solicitation is posted under NAICS code 238160, which classifies it as roofing contractor services, and is managed by the Department of Defense through the agency FA8501 Opl Contracting Afsc/pzio. Performance of the work is designated to occur in Warner Robins, Georgia, with a zip code of 31098, and the deadline for responses is August 14, 2026, at 8:00 PM Eastern Time. The opportunity is open exclusively to small businesses as defined by the Small Business Administration, and the contract is structured as a subcontract, indicating the award will be made to a prime contractor who may utilize subcontractors to fulfill the scope. The posting date is August 5, 2026, and interested parties can access further details through the designated SAM.gov link.

FA8501 Opl Contracting Afsc/pzio

POSTED

about 15 hours ago

DEADLINE

High-Precision Surveying Instrument SupplyThe contract calls for the supply of a commercial-grade Scanning Total Station equipped with advanced 3D laser scanning, robotic tracking, and extended-range wireless control capabilities, all designed to meet rigorous performance standards for angular precision, scanning speed, and operational range. The instrument must support high-fidelity data collection in demanding field environments and fulfill specific technical benchmarks established by the requesting agency to ensure compatibility with existing surveying protocols and mission-critical infrastructure projects. The procurement is issued as a subcontract under NAICS code 334516 by the Department of Defense through the W6QK Acc-Apg Adelphi office, with performance required at Adelphi, Maryland, ZIP 20783. The solicitation was posted on August 5, 2026, and responses are due by August 19, 2026, at 7:30 AM. This opportunity is not subject to any set-aside designations, and the delivery of the fully compliant instrument must be completed within the specified timeframe to satisfy operational readiness requirements for defense and geospatial surveying applications.

W6QK Acc-Apg Adelphi

POSTED

about 15 hours ago

DEADLINE

Roofing and Waterproofing

Oregon State Office

POSTED

about 15 hours ago

DEADLINE

TARC Building 1 Roof Replacement

Solicitation # W9133L26QA018

The U.S. Army’s W39L USA National Guard Readiness Center is soliciting commercial construction services for a complete tear-off and replacement of the low-slope commercial roof system at Building 1 of the Temple Army Readiness Center located at 111 S. George Mason Drive, Arlington, VA. The project involves removing all existing roofing components including river-washed ballast stone, extruded insulation, filter fabric, roof drains, and EPDM membrane down to the sloping concrete deck, followed by installation of two layers of 2-6-inch polyisocyanurate insulation achieving a minimum R-value of R-30 and a 60-mil or higher white reinforced thermoplastic polyolefin (TPO) membrane. Ancillary work includes replacement of all roof drains and flashing penetrations for HVAC, curbs, pipes, and skylights, coordination with an LPI-certified lightning specialist for lightning protection system reinstallation, and installation of sheet metal and flashing. The work must comply with the 2021 Virginia Energy Conservation Code for Climate Zone 4 and all applicable state and local building codes, and is categorized as commercial construction under FAR 12 procedures. This is a 100% small business set-aside solicitation under NAICS code 238160 with a size standard of $19 million. The acquisition follows the Revolutionary Federal Acquisition Regulation overhaul (RFO FAR) with deviations, and award will be made to the responsible offeror whose proposal, conforming to the solicitation, provides the most advantageous price and price-related factors. The solicitation number is W9133L26QA018, issued on July 31, 2026, with a response deadline of August 26, 2026, at 2:00 p.m. EDT, and submissions must be sent electronically via email to the designated contracting office personnel at amanda.m.bogue.civ@army.mil and david.m.best.civ@army.mil, with all documents in PDF format. Offers must include a completed SF 1442 with original signature, SF 24 bid guarantee bond at 20% of bid price or $3 million, whichever is less, current SAM registration and certification data within the past year, compliance with all Section 00 45 00 representational requirements, and acknowledgment of all amendments including Update 8/5/2

W39L USA Ng Readiness Center

POSTED

about 15 hours ago

DEADLINE

NOTICE OF INTENT TO SOLE SOURCE: Roche Diagnostics for Digital LC Analyzer and LightCycler PRO 384

Solicitation # 123A9426P0024

The USDA Food Safety and Inspection Service intends to award a sole-source firm-fixed price purchase order to Roche Diagnostics for the acquisition of specific laboratory equipment including one Digital LC Analyzer, one Digital LC Partitioning Engine, one LightCycler PRO 384, and one Thermal Cycler Assembly 96, all with delivery and installation. These instruments are critical for detecting and quantifying genetic polymorphisms through real-time fluorescence measurement, a technique essential for genomic analysis in food safety research. The procurement is justified under FAR 12 on the basis that Roche Diagnostics is the only source capable of providing these specialized tools, which are widely relied upon in genomics for precise DNA quantification. This action is published as a notice of intent and not as a solicitation for competitive bids, though any responsible entity may submit a capability statement demonstrating that its alternative products meet the same technical requirements. Responses must include the company name, CAGE code, and a detailed technical description showing how the proposed solution fulfills all specified needs. All submissions are due by August 12, 2026, and will be evaluated solely to determine whether a competitive procurement is necessary, at the discretion of the Contracting Officer. The notice is issued under NAICS code 334516, with performance and delivery occurring in Indianapolis, Indiana, and primary point of contact information available through the provided agency liaison.

Food Safety And Inspection Service

POSTED

about 15 hours ago

DEADLINE

Purchase metallographic samples for SIB laser texturing program

Solicitation # N0017326P1301393355

The Naval Research Laboratory intends to award a sole source purchase order to LECO CORP for the procurement of metallographic samples to support the SIB laser texturing program, asserting that no other source can satisfy the agency’s requirements. This action is justified under the Simplified Acquisition Procedures outlined in FAR Part 13.106-1(b), with the total value expected to remain below the $250,000 threshold. The procurement falls under NAICS code 334516, designated for small businesses, and uses Federal Supply Code 6640. Interested parties may submit evidence demonstrating that competition would benefit the government, but any response must clearly and convincingly justify an alternative to sole sourcing; failure to do so will not influence the decision. The government retains full discretion to proceed without competition regardless of responses received, and no costs incurred in submitting information will be reimbursed. All correspondence must reference the notice number N00173-26-P-1301393355 and be submitted before the deadline of August 7, 2026, at 0800 hours. The primary point of contact for inquiries is James Buie of the Department of Defense at the Naval Research Laboratory in Washington, DC.

Naval Research Laboratory

POSTED

about 15 hours ago

DEADLINE

66--in-house gamma-counting system

Solicitation # 140G0326Q0178

The U.S. Geological Survey, under the Office of Acquisition Grants within the Department of the Interior, is conducting market research to identify qualified businesses capable of supplying an in-house gamma-counting system that meets specific technical requirements outlined in attached specifications. This initiative is not a solicitation for proposals or quotes and does not obligate the government to award a contract; the sole purpose is to assess industry capability and inform future acquisition planning. Respondents must clearly demonstrate full compliance with all specifications including system size, warranty terms, technical support capabilities, and software functionality, and must explicitly state the country of manufacture. The applicable NAICS code is 334516 for Analytical Laboratory Instrument Manufacturing with a size standard of 1,000 employees. Responses must be submitted exclusively via electronic mail to tracy_huot@ios.doi.gov and received in their entirety no later than August 12, 2026, at 1700 Pacific Daylight Time. Hardcopy submissions or responses sent through the SAM web portal will not be accepted or considered. The point of contact for inquiries is Tracy Huot, reachable at thuot@usgs.gov or 916-278-9330, and all submissions must originate from responsible sources meeting the outlined criteria without expectation of reimbursement for preparation costs.

Office Of Acquisiton Grants

POSTED

about 15 hours ago

DEADLINE