Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

PRECISION PNEUMATICS INC

UEI: MQDRRHJDBJS8

PRECISION PNEUMATICS INC is a federal contractor, registered under UEI MQDRRHJDBJS8. It has been awarded $250,369 in federal contracts. Primary work spans All Other Miscellaneous Fabricated Metal Product Manufacturing, Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing, and Air and Gas Compressor Manufacturing. Top awarding agencies include Department Of Defense, Department Of Veterans Affairs, and Department Of The Interior.

Contact Information

Registration and classification details

Registration

UEI Code

MQDRRHJDBJS8

Federal Contracting Overview

Award totals, agency breakdown, NAICS distribution, and geographic footprint.

Key Performance Metrics

Awards Count

10

All time

Active

0

Currently performing

Completed

10

Past period of performance

Total Awards

All time

Contracts

Prime · all time

Subcontracts

Sub · all time

Grants

Prime · all time

Subgrants

Sub · all time

Award Analytics & Distribution

Awards by Agency

Department Of Defense$191.6K76.5%Department Of Veterans Affairs$39.2K15.7%Department Of The Interior$15.6K6.2%Department Of Justice$4.0K1.6%

Awards by NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing$153.0K61.1%333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing$36.9K14.7%333912 - Air and Gas Compressor Manufacturing$34.8K13.9%333911 - Pump and Pumping Equipment Manufacturing$15.6K6.2%333411 - Air Purification Equipment Manufacturing$7.8K3.1%

- Unknown NAICS$2.3K0.9%

Awards by Agency Over Time

Awards by Place of Performance

Compete with PRECISION PNEUMATICS INC

Track the contractors you bid against, and the work they win

Award history, agency mix, and NAICS coverage for PRECISION PNEUMATICS INC

AI-powered matching against your own capabilities and past performance

Teaming and subcontracting signals on every award

Automated alerts when a competitor wins in your market

Join 750+ contractors already using CLEATUS

Open opportunities in PRECISION PNEUMATICS INC's top NAICS codes and agencies

Water Booster Pump Skid Manufacturing & SupplyThis subcontract for Water Booster Pump Skid Manufacturing and Supply involves the production and delivery of a complete, pre-assembled water booster pump skid unit for prime contractors working on City of Worcester DPW water utility projects. The scope of work includes the fabrication of the steel skid frame and the integration of pumps, motors, controllers, and piping into a single modular unit, followed by comprehensive factory testing to ensure operational readiness. The project requires strict adherence to industry standards, specifically mandating UL listing for all electrical control panels and compliance with ASME and ANSI standards. The final deliverable is one fully assembled and tested unit to be performed in Worcester, Massachusetts. Responses for this opportunity are due by November 25, 2026.

PUR001 - Purchasing Department

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Raw Material Supply for Adapter AssemblyThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC, involves the supply of certified raw metals and alloys for prime contractors working on Army hardware projects. The scope of work specifically requires the sourcing and delivery of materials for NSN 1430-01-227-4791, with a strict requirement for the provision of mill test reports and material certifications to ensure quality and compliance. The contract is designated as a Total Small Business Set-Aside under NAICS code 332999. A critical compliance factor is adherence to the Buy American Act to guarantee the domestic status of the end product. Interested parties must have responded by the deadline of October 29, 2026, to provide these certified raw materials directly to the manufacturer.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Manufacturing and Supply of Adapter Assembly (NSN 1430-01-227-4791)This subcontract involves the manufacture and supply of 24,000 Adapter Assemblies, identified by NSN 1430-01-227-4791, for prime contractors supporting DLA and Army hardware contracts. The selected provider must utilize precision machining equipment to fabricate assemblies according to government drawings and is required to submit samples for approval. Essential deliverables include full material certifications and detailed process operation sheets for all units. The opportunity is a total small business set-aside under NAICS code 332999, managed by the Department of Defense through the DLA Weapons Support ASC. Due to the handling of Federal Contract Information, the contractor must maintain CMMC compliance. The response deadline for this requirement is October 29, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE4A7-27-R-X068

Solicitation SPE4A7-27-R-X068 is an Indefinite Delivery Purchase Order issued by the DLA Weapons Support ASC for the procurement of 124,000 sleeve spacers, identified by NSN 5365-01-034-2519. The contract is not a small business set-aside and is intended to span five base years or until an aggregate total of 350,000 dollars is reached. Pricing should be based on an estimated annual quantity of 125 units, with minimum delivery orders of 75 and maximums of 201. Delivery is required within 200 days after receipt of order to various CONUS stock locations, with inspection and acceptance occurring at the destination. The award will be based on best value, with a significant emphasis on past performance, specifically SPRS assessments and historical quality and delivery compliance. Technical requirements are governed by the DLA Master List, and sampling must follow MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001. Due to the presence of controlled unclassified information, contractors must obtain CMMC Level 2 certification and upload it to the SPRS by November 10, 2026. Additionally, the item is subject to ITAR or EAR export controls, requiring approved JCP certification and specific DLA training for access to technical data. Invoicing and payment must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

ADAPTER, ASSEMBLY

Solicitation # SPE4A7-27-R-X056

Solicitation SPE4A7-27-R-X056 is a total small business set-aside for the procurement of adapter assemblies, NSN 1430-01-227-4791. This indefinite delivery contract may result in multiple purchase orders over a five-year term or until an aggregate total of 350,000 dollars is reached. The primary requirement is for 24,000 units, though pricing should be based on an estimated annual quantity of 24 units, with minimum and maximum delivery order limits of 10 and 37 units respectively. Delivery is required within 150 days after receipt of order to various CONUS stock locations, with both inspection and acceptance occurring at the origin. The contract is governed by firm fixed pricing and requires adherence to specific technical drawings and quality standards, including MIL-STD-1916 for sampling and MIL-STD-129 for marking and labeling. Packaging must comply with ASTM D3951 and RP001 for palletization, with the DLA Master List of Technical and Quality Requirements taking precedence. Award decisions will be based on best value, weighing price, past performance, and SPRS assessments. Contractors must be registered in the System for Award Management, provide a CMMC Level 2 self-assessment, and utilize the Wide Area WorkFlow system for invoicing and payment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

High-Pressure Storage Cylinders and Fill Station SupplierThis subcontract agreement involves the supply and delivery of high-pressure storage banks and enclosed containment fill stations for fire department projects managed by the Wilcox County Board of Commissioners in Georgia. The scope of work includes providing four ASME/DOT rated cylinders equipped with steel racks, isolation valves, and a priority fill panel, as well as an enclosed station featuring two fill positions and integrated safety interlocks. The procurement is categorized under NAICS code 332999 and was posted on October 20, 2026, with a response deadline of November 19, 2026. The selected supplier will be responsible for the complete delivery of the storage racks, cylinders, and the enclosed fill station to support prime contractors on these municipal projects.

Wilcox County Board of Commissioners

POSTED

about 15 hours ago

DEADLINE

SCBA Compressor and Air Purification Equipment SupplierThis subcontract agreement involves the supply of a complete high-pressure breathing air compression and filtration system for fire department projects managed by the Wilcox County Board of Commissioners in Georgia. The scope of work requires the delivery of a four-stage, air-cooled, oil-lubricated compressor from brands such as Arctic, Bauer, or Mako, featuring a capacity of 6,000 PSI and 10 CFM. The equipment must include a Grade E purification system equipped with a carbon monoxide monitor and replaceable cartridges. Interested parties must respond by November 19, 2026, to provide these essential systems to the prime contractors overseeing the project.

Wilcox County Board of Commissioners

POSTED

about 15 hours ago

DEADLINE

Wilcox County Board of Commissioners (SCBA Compressor and fill station RFP)

Solicitation # PE-77234-NONST-2027-000000012

The Wilcox County Board of Commissioners is soliciting proposals for the procurement, delivery, and installation of a complete Self Contained Breathing Apparatus (SCBA) Compressor and Fill Station for the Wilcox County Fire Department. The scope of work requires a four-stage, air-cooled, oil-lubricated compressor from manufacturers such as Arctic, Bauer, or Mako, featuring a minimum operating pressure of 6,000 PSI and a capacity of 10 CFM. The system must include a Grade E breathing air purification system with carbon monoxide monitoring, four ASME/DOT storage cylinders with a priority fill panel, and an enclosed containment fill station meeting current NFPA requirements, including a safety interlock. The selected vendor will be responsible for the full installation, system and leak testing, operational demonstrations, air quality certification, and on-site training for personnel. Proposals must be submitted in a sealed envelope labeled specifically as a sealed bid and delivered to the Commissioner's Office in Abbeville, Georgia, by 2:30 PM on November 19, 2026. Bidders must provide a GSICA Contractor affidavit, drug-free workplace certification, and equal opportunity employer certification, with minority and DBE contractors encouraged to apply. All pricing must be inclusive of shipping and remain valid for four months following the bid opening. Evaluation will be based on technical compliance and product quality, though alternate brands of equal or better quality may be proposed. The award may be issued to a single contractor or split among multiple vendors at the discretion of the Board of Commissioners.

Wilcox County Board of Commissioners

POSTED

about 15 hours ago

DEADLINE

PLOW BLADES, NOSE PIECES, AND SHOES

Solicitation # 39-27

The State of New Hampshire, through the Department of Administrative Services, is soliciting bids for a non-exclusive contract to procure snow plow blades, nose pieces, and shoes. The equipment must be manufactured from new materials by experienced providers capable of producing at least 100 units annually. All components must be compatible with Frink or Viking truck attachments and ready for immediate use without modification. Key deliverables include various carbide blades, adaptor blades, straps, and wing shoes, with specific requirements for ASTM A36 Structural Grade hot rolled flat steel for adapter blades. Bidders are required to submit shop drawings for approval by the NHDOT Bureau of Highway Maintenance and provide Certificates of Analysis for carbide inserts and rubber molding. The award will be granted to the responsible vendor offering the lowest cost for conforming bids, with the possibility of awards by individual items. Technical requirements include specific marking and identification stamps on each blade section, the use of lead-free rust-resistant lacquer, and the exclusion of lacquer on carbide edges to allow for physical inspection. Delivery must be completed within 30 days of a purchase order, with prices quoted as F.O.B. Destination. A pre-inspection is mandatory prior to delivery. Bids must be submitted via email to the Bureau of Purchase and Property by November 9, 2026, and must include a signed transmittal letter, pricing offer, and vendor contact information.

Das Purchasing (statewide Bids & Contracts)

POSTED

about 15 hours ago

DEADLINE

Supply of Fluid Filter Elements (NSN 2940-01-359-8346)This subcontract involves the supply of specialized fluid filter elements, specifically part number NSN 2940-01-359-8346, to support prime contractors working with DLA Weapons Support under the Department of Defense. The selected provider must be a registered manufacturer or an authorized distributor capable of delivering the physical components to the designated facility in New Cumberland. The contractor is required to provide evidence of commerciality in accordance with FAR 2.101(b) and must submit certified cost or pricing data if requested. This opportunity falls under NAICS code 332999, with a response deadline set for October 30, 2026.

DLA Weapons Support

POSTED

about 18 hours ago

DEADLINE

Commercial Refrigeration Display Case and Walk-in Evaporator SupplyThis subcontract involves the supply of commercial refrigeration units for prime contractors working on Defense Commissary Agency Europe Area projects. The scope of work includes providing display cases and walk-in chillers, including evaporators, specifically for installation at RAF bases in Lakenheath. All hardware must adhere to strict technical data requirements and comply with UK host nation statutory safety standards. The contract focuses on the delivery of physical hardware as detailed in the pricing schedule CLINs under NAICS code 333415. Managed by the Department of Defense, the procurement process began with a posting date of October 20, 2026, and a response deadline of October 29, 2026.

Defense Commissary Agency- Eur Area

POSTED

about 18 hours ago

DEADLINE

Vacuum-Compatible Flex-CouplingsThis subcontract involves the manufacture and supply of vacuum-compatible flex-couplings for prime contractors working on Department of Energy projects at Brookhaven National Laboratory in Upton. The scope of work includes producing flexible couplings using bellows or vacuum-grade alloys designed to preserve vacuum integrity during thermal expansion or mechanical movement. The contractor is responsible for performing critical quality assurance tasks, including pressure rating certifications and ultra-high vacuum leak testing, before delivering the completed components. This opportunity is categorized under NAICS code 332999, with a response deadline set for December 4, 2026.

Brookhaven National Labor -Doe Contractor

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Coaxial High-Voltage UHV FeedthroughsThis subcontract involves the manufacture and supply of coaxial high-voltage ultra-high-vacuum feedthrough interfaces for prime contractors supporting Department of Energy projects at Brookhaven National Laboratory in Upton. The scope of work includes the production of vacuum-sealed electrical interfaces utilizing high-voltage coaxial connectors and ceramic-to-metal seals. To ensure technical compliance, the provider is responsible for performing high-voltage insulation testing and vacuum leak rate certifications. The procurement is categorized under NAICS code 332999, with a response deadline set for December 4, 2026.

Brookhaven National Labor -Doe Contractor

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Fairing Nozzle Supplier (NSN 4730-01-709-1524 B8)This subcontract involves the supply of 41 Fairing Nozzles to prime contractors supporting DLA supply contracts for the Department of Defense. The supplier is responsible for manufacturing or sourcing components that strictly adhere to NSN 4730-01-709-1524 B8 specifications while ensuring full compliance with Buy American and Trade Agreements. The scope of work includes performing all necessary preservation, packaging, and marking according to government standards, specifically including DLR labeling. Additionally, the contractor must provide IUID reporting via WAWF and ensure the final delivery of the 41 packaged nozzles to location SW3113.

Pa DLA Aviation At Philadelphia

POSTED

about 18 hours ago

DEADLINE

Supplier of VAWLE, HOT SIDE TEM ComponentsThis subcontract through the Department of Defense and Pa DLA Aviation At Philadelphia involves the supply of specialized hardware components, specifically VAWLE and HOT SIDE TEM, for prime contractors on Defense Logistics Agency supply contracts. The selected provider is responsible for manufacturing or sourcing components according to CLINs 0001AA and 0001AB, ensuring all items are delivered with proper Depot Level Repairable labels and hazardous material packaging in compliance with 29 CFR 1910.1200. To be eligible, the supplier must maintain an active SAM registration and provide certification under the Trade Agreements Act. The contract falls under NAICS code 332999, with a response deadline set for November 19, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 18 hours ago

DEADLINE

4120--SPECIAL Duplex Strainer - MPLS

Solicitation # 36C26327Q0054

Solicitation 36C26327Q0054 is an accelerated request for quotes issued by the Department of Veterans Affairs Network Contracting Office 23 for the supply and delivery of a brand name or equal Keckley duplex strainer and gasket for the Minneapolis VA Health Care System. This is a small business set-aside conducted under FAR Part 12 for commercial products, utilizing NAICS code 333415. The government intends to award one firm fixed price contract for one 20 inch Keckley Basket Strainer 150 RF Duplex assembly and one O-ring gasket. All items must be new and unused, featuring a modular design with sections not exceeding 2,000 pounds, carbon steel shell construction, and a one year warranty covering defects in materials and workmanship. The period of performance is from November 9, 2026, to March 15, 2027, with all deliverables due at the Minneapolis facility by the end date. Delivery is required FOB Destination, and the contract price must include all equipment, accessories, and shipping charges. Prospective offerors must be registered in the System for Award Management and the SBA Small Business Search database. Quotes must be submitted via email to the contract specialist by 10:00 AM on October 30, 2026. Submissions must include a Buy American Certificate of Origin and details regarding the manufacturer's socioeconomic category.

Network Contract Office 23 (36C263)

POSTED

about 18 hours ago

DEADLINE

PEO-M Undersea Test Shape and Cradle Assessment Event (AE)

Solicitation # PEO_M_Undersea_Test__Shape_and_Cradle_AE

Department Of Defense

POSTED

about 18 hours ago

DEADLINE

Request for Information: Additive Manufacturing

Solicitation # N0010427RZ058

The Naval Supply Systems Command Weapon Systems Support is conducting market research through Request for Information N0010427RZ058 to identify qualified sources capable of designing, producing, and delivering piece part components or entire assemblies using additive manufacturing methods. The government is specifically interested in vendors who can meet rigorous manufacturing, material, performance, testing, and quality assurance requirements. While the current focus is on a candidate list of National Item Identification Numbers for valves, actuators, and manifolds, the government anticipates that Level I and SUBSAFE items may become eligible for additive manufacturing in the future. Interested businesses must provide detailed administrative data, descriptions of their manufacturing capabilities, facility certifications such as ISO 9001 or AS9100, and evidence of past performance with similar military or commercial hardware. Additionally, the government is soliciting industry feedback on the development of objective evaluation criteria and the structuring of performance-based incentives for future Firm-Fixed-Price contracts. All produced components must be fully interchangeable with traditionally manufactured equivalents and strictly adhere to the baselines established in Project Peculiar Document 802-8436658. Responses are due by October 22, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 18 hours ago

DEADLINE