Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

TRITIUM LABORATORY

Parent1 subsidiaryUEI: VNZZYCJ55TC4

TRITIUM LABORATORY is a federal contractor, registered under UEI VNZZYCJ55TC4. It has been awarded $1,778,704 in federal contracts. Primary work spans Testing Laboratories and Services and Unknown NAICS. Top awarding agencies include Department Of The Interior and National Aeronautics And Space Administration.

Contact Information

Registration and classification details

Registration

UEI Code

VNZZYCJ55TC4

Subsidiaries

1 company rolls up into TRITIUM LABORATORY, sized by each one's own awards

Award distribution

$872.9M

University of MIAMI$872.9M

1University of MIAMIUEI KXN7HGCF6K91$872.9M100.0%

Compete with TRITIUM LABORATORY

Track the contractors you bid against, and the work they win

Award history, agency mix, and NAICS coverage for TRITIUM LABORATORY

AI-powered matching against your own capabilities and past performance

Teaming and subcontracting signals on every award

Automated alerts when a competitor wins in your market

Join 750+ contractors already using CLEATUS

Open opportunities in TRITIUM LABORATORY's top NAICS codes and agencies

Force Plate SKID Truck Calibration for the MNT team

Solicitation # 601440000054633

The Texas Department of Transportation has issued solicitation number 601440000054633 for Force Plate SKID Truck Calibration for the MNT team. This procurement focuses on pavement testing and data collection equipment, specifically pavement sensors used for reading road conditions. The performance of these services will take place within the state of Texas. Interested vendors must register and submit their responses through the Euna Procurement portal. The deadline for submittals is November 4, 2026, at 9:00 PM, and no responses will be accepted after this time. The primary point of contact for this solicitation is Karina Flores, who can be reached via email at Karina.Flores@txdot.gov or by phone at 512-460-8826.

Texas Department of Transportation

POSTED

about 8 hours ago

DEADLINE

Trace Organic Analysis Laboratory ServicesThis subcontract for Trace Organic Analysis Laboratory Services supports prime contractors on wastewater projects for the City of Atlanta Department of Watershed Management. The selected provider will perform laboratory testing of wastewater samples to verify compliance with industrial pretreatment program requirements and NPDES permits, adhering strictly to Georgia EPD and EPA standards. The contractor must hold NELAP or a state-equivalent certification to deliver certified data and laboratory analysis reports. This opportunity falls under NAICS code 541380, with a response deadline set for October 30, 2026.

City of Atlanta

POSTED

about 8 hours ago

DEADLINE

MS-IFB/DWM/2609-1270093/Trace Organic Laboratory Services

Solicitation # PE-66062-NONST-2027-000000508

The City of Atlanta Department of Watershed Management is seeking specialized trace organic laboratory testing services under solicitation number PE-66062-NONST-2027-000000508. These services are required to support compliance with National Pollutant Discharge Elimination System permits and industrial pretreatment program requirements that exceed the internal capabilities of the City Wastewater Services Laboratory. The procurement is essential for maintaining regulatory compliance with EPA and Georgia EPD standards for wastewater treatment plants and CSO control facilities within the state of Georgia. Interested suppliers must be registered on the Atlanta suppliers portal to view or download the solicitation documents. The solicitation was posted on October 21, 2026, with a response deadline of October 30, 2026, at 7:00 PM. Primary inquiries and coordination for this effort are managed by Lyndon McCluskey.

City of Atlanta

POSTED

about 8 hours ago

DEADLINE

Material Testing and Special InspectionsThis subcontract for East Texas A&M University involves providing third-party testing of construction materials and specialized inspections for prime contractors on university facility projects. The scope of work includes conducting soil compaction, concrete slump and strength, and weld testing, as well as performing special inspections to ensure compliance with applicable building codes. The selected provider must utilize an accredited testing laboratory and non-destructive testing tools to deliver certified material test reports and detailed inspection logs. Qualified contractors are required to hold ICC certifications to perform these specialized services. This opportunity is categorized under NAICS code 541380 and was posted on October 21, 2026, with a response deadline of November 6, 2026.

East Texas A&M University

POSTED

about 8 hours ago

DEADLINE

Third-Party Materials Testing and InspectionThis subcontract for Third-Party Materials Testing and Inspection, issued by the Fulton County Purchasing Department in Georgia, involves providing independent testing and inspection of coatings for prime contractors on water storage projects. The scope of work includes inspecting surface profiles after blasting, measuring dry film thickness, conducting adhesion testing, and performing quality assurance inspections using holiday detectors and DFT gauges. Qualified providers must employ NACE/AMPP certified coating inspectors to ensure all standards are met and deliver detailed inspection reports and certifications of compliance. The solicitation was posted on October 21, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.

Fulton County Purchasing Department

POSTED

about 8 hours ago

DEADLINE

Environmental Laboratory Analysis and Technical ServicesThe Environmental Laboratory Analysis and Technical Services subcontract supports prime contractors on projects for the Rhode Island Department of Environmental Management. The scope of work involves performing chemical analysis of unknown materials and providing environmental consulting, specifically focusing on organic and inorganic analysis, EPA Method 1311 Zero Headspace Extraction, and comprehensive geological and hydrological assessments. The primary deliverables for this engagement are detailed analytical reports and compliance summaries. To qualify for this contract, service providers must maintain laboratory accreditation for the required EPA methods. Additionally, the contract mandates that personnel performing specialized tasks hold professional licenses in geology, biology, or toxicology. This effort falls under NAICS code 541380 and is managed through the State of Rhode Island.

State of Rhode Island

POSTED

about 8 hours ago

DEADLINE

in about 2 years

Water Quality Testing and AnalysisThis subcontract for Water Quality Testing and Analysis involves providing specialized water sampling and laboratory services for prime contractors working on Alabama state facility projects at Old Cahawba. The selected provider will be responsible for collecting water samples and analyzing them for biological agents or contaminants in strict accordance with state standards. To qualify, the contractor must utilize a certified laboratory with NELAP or a state-equivalent accreditation and employ certified equipment to ensure accuracy. The final deliverable for this engagement is the provision of certified water analysis reports. This opportunity is categorized under NAICS code 541380 and is associated with the Cahawba/JT Morgan house.

Cahawba/JT Morgan house

POSTED

about 9 hours ago

DEADLINE

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves performing on-site inspections of construction activities for prime contractors on City of Okeechobee projects. The primary objective is to ensure all work complies with engineering plans and specifications. Responsibilities include attending Technical Review Committee meetings and utilizing specialized field testing equipment and inspection software to monitor progress. Qualified candidates must be certified inspectors, with credentials such as ACI or NICET. Key deliverables for the contract include the submission of daily inspection reports, non-compliance reports, and final inspection sign-offs. The solicitation was posted on October 21, 2026, with a response deadline of November 6, 2026.

City of Okeechobee

POSTED

about 10 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Hydrostatic CertificationThis subcontract, issued by the Department of Defense under the Navsup Weapon Systems Support Mech, involves providing specialized non-destructive testing and hydrostatic certification for critical safety items on Naval Sea Systems Command projects. The scope of work includes performing hydrostatic testing at 150 percent pressure, dye penetrant inspections, and quantitative chemical and mechanical analysis of titanium alloys to ensure structural integrity and safety compliance. Qualified contractors must hold a Confidential security clearance and possess ASNT Level II or III certifications to perform these technical evaluations. The primary deliverables for this engagement are certified test reports and detailed analysis data. Interested parties should note the response deadline of November 20, 2026, for this opportunity categorized under NAICS code 541380.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

Flight-Critical Module Testing and CertificationThe Flight-Critical Module Testing and Certification subcontract involves performing final testing and inspection of repaired NRP/NSPR Module Assemblies for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider must execute testing procedures according to approved repair and overhaul manuals, utilizing calibrated measuring and test equipment that complies with NCSL Z540.3 or ISO 10012 standards. The primary deliverables for this engagement include detailed test reports and the certification of Ready For Issue status for every unit processed. This Department of Defense requirement falls under NAICS code 541380, with a response deadline set for November 20, 2026.

Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

CSI Material Testing and Ultrasonic Inspection ServicesThe CSI Material Testing and Ultrasonic Inspection Services subcontract involves providing specialized non-destructive testing and laboratory analysis for prime contractors supporting the Department of Defense, specifically the NAVSUP Weapon Systems Support Mech. The scope of work focuses on the ultrasonic inspection of starting materials and the execution of slow strain rate tensile tests for Level I Special Emphasis material in accordance with DI-QCIC-81110 (SE) standards. To fulfill these requirements, the contractor must utilize professional ultrasonic testing equipment and laboratory-grade tensile machinery. Key deliverables for this engagement include the provision of detailed inspection reports, test certifications, and Certificates of Compliance. This opportunity falls under NAICS code 541380 and has a response deadline of November 20, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

Non-Destructive Testing (NDT) and SurveyThis subcontract opportunity, managed by the Department of Homeland Security for the US Coast Guard SFLC, involves providing specialized non-destructive testing and survey services for vessel projects. The selected contractor will perform technical inspections, including ultrasonic testing of hull plating freeboard and underwater hull plating and appendages. Key deliverables include the submission of detailed Condition Inspection Reports and comprehensive ultrasonic test results. The project requires the deployment of Certified Non-Destructive Test inspectors to ensure all technical standards are met. This is a total small business set-aside under NAICS code 541380. Interested parties must submit their responses by November 16, 2026.

POSTED

about 11 hours ago

DEADLINE

Non-Destructive Testing (NDT) and Quality CertificationThis subcontract focuses on providing Non-Destructive Testing (NDT) and quality certification services for prime contractors supporting the Department of Defense, specifically within the NAVSUP Weapon Systems Support Mech agency. The scope of work involves executing NDT procedures to ensure material compliance for Special Emphasis Level I safety requirements and conducting quality audits. The selected provider is responsible for preparing detailed records for DCMA and DCAA QAR review and delivering validated inspection records and test reports. To ensure technical accuracy and regulatory adherence, the contract mandates strict compliance with ISO/IEC 17025 and ANSI/NCSL Z540.3 standards. This opportunity falls under NAICS code 541380, with a response deadline set for November 25, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Radiological Safety & Compliance TestingThe Radiological Safety and Compliance Testing subcontract involves performing radiation surveys and leak tests for prime contractors supporting Department of Homeland Security Customs and Border Protection projects. Based in Ashburn, Virginia, the scope of work requires conducting surveys in accordance with CFR 21 Part 1020.40 and utilizing radiation detection meters to test radiation-emitting equipment. The selected provider must ensure strict compliance with FDA Performance Standards for Ionizing Radiation Emitting Products and maintain close coordination with the Radiation Safety Officer to deliver comprehensive Radiation Survey and Leak Test Reports. This opportunity is categorized under NAICS code 541380 and is managed through the Information Technology Contracting Division. Interested parties should note the response deadline of October 28, 2026. The contract focuses on critical safety and regulatory compliance to ensure the secure operation of radiological equipment within the agency's infrastructure.

Information Technology Contracting Division

POSTED

about 11 hours ago

DEADLINE

Independent Quality Assurance and Certification ServicesThis subcontract for Independent Quality Assurance and Certification Services supports NAVSUP Weapon Systems Support projects by providing independent verification, calibration, and certification for Special Emphasis Level I materials. The scope of work includes performing hydrostatic testing, dye penetrant inspections, and tool calibration in accordance with ANSI/NCSL Z540.3, as well as the development of Objective Quality Evidence packages. To ensure technical compliance, the contractor must maintain ISO/IEC 17025 accreditation and utilize ANSI/ASQ Z1.4 sampling methods. Final deliverables consist of certified test reports and Certificates of Compliance. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

NDT Inspection and Certification for Naval Pipe FittingsThis subcontract involves providing non-destructive testing and quality inspections for naval pipe fittings on Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing hydrostatic testing and dye penetrant inspections on production welds and weld repairs, ensuring strict adherence to MIL-STD-2035, MIL-I-45208, and MIL-STD-45662 standards. The selected provider must maintain ISO/IEC 17025 accreditation and utilize calibrated measurement tools to deliver formal NDT certification reports and signed inspection certificates. The opportunity is categorized under NAICS code 541380 and is issued by the Department of Defense. Interested parties must submit their responses by November 4, 2026, at 8:30 PM. This project focuses on critical quality assurance for prime contractors to ensure the structural integrity of naval components.

Navsup Weapon Systems Support Mech

POSTED

about 11 hours ago

DEADLINE

Precision Calibration and Testing ServicesThe Precision Calibration and Testing Services subcontract involves performing calibration of test equipment and certified testing of repaired receiver-transmitters for prime contractors supporting Navsup Weapon Systems Support projects. The selected provider will utilize precision calibration laboratory equipment to verify that hardware performance aligns with specific technical specifications. All work must be conducted in strict compliance with a Quality Management System and applicable international, military, or industry calibration standards. The primary deliverables for this engagement include the provision of detailed test reports and calibration certificates. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 11 hours ago

DEADLINE

Canopy Qualification Testing and EvaluationThe Canopy Qualification Testing and Evaluation subcontract involves providing independent laboratory testing and evaluation of canopy prototypes for prime contractors supporting US Air Force flight safety projects. The scope of work includes conducting form, fit, and function testing, environmental stress testing, optical clarity verification, and impact resistance testing utilizing ballistic rigs and environmental chambers. The successful provider must deliver comprehensive test reports and certification documents. To be eligible, the contractor must maintain ISO/IEC 17025 accreditation and possess DD 2345/JCP access. This opportunity is issued by the Department of Defense under agency FA8212 Afsc Olh Pzaba with a NAICS code of 541380. The response deadline for this requirement is February 16, 2027.

FA8212 Afsc Olh Pzaba

POSTED

about 11 hours ago

DEADLINE