Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

FAIRING, AIRCRAFT

Active
SPE4A7-26-R-0674Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of an aircraft fairing designated as part number 65-55125-1, manufactured in accordance with drawing number 81205 65-55125 Revision C dated November 4, 1988, for use on the B-52 aircraft. This is an indefinite quantity contract with a base period of five years and no option periods, under which the estimated annual requirement is 40 units. All deliveries must be completed within 200 days of order placement, with FOB origin terms and inspection and acceptance occurring at the manufacturing site. Access to the technical data required for production is restricted to contractors certified by the Department of Defense through submission of DD Form 2345, ensuring compliance with national security protocols for handling unclassified technical data. The solicitation, numbered SPE4A726R0674, will be issued on or about August 3, 2026, as a total small business set-aside, and is accessible exclusively through the DLA Internet Bid Board System (DIBBS). Paper copies will not be provided. Proposals are due by September 22, 2026, and all submissions must be made via the online portal using Adobe Acrobat Reader. The contracting office is located in Richmond, Virginia, and the point of contact is Ryan Loeffelholz.

General Info

Procurement of B-52 aircraft fairing part 65-55125-1, 40 units/year, 5-year indefinite contract, small business set-aside, DIBBS only.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(2)

Solicitation SPEA47-26-R-0674 Sealed Bid for Aircraft Fairing

PDF•ifb

SPE4A726R0674 Packaging and Marking Data for Aircraft Fairing

PDF•packaging-data

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Presolicitation

Type Changed

Presolicitation → Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Ryan Loeffelholz
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
FAIRING, AIRCRAFT RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1560-01-019-1406 Quantity: 6 EA Delivery: 200 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
FEEL MECHANISM, RUDD
Solicitation # SPE4A5-26-R-0252
The contract pertains to the procurement of 11 units of a Feel Mechanism, Rudder Control with NSN 1680-01-355-0053 and Boeing part number 65-39753-501 under solicitation SPE4A5-26-R-0252. Delivery is scheduled for 703 days after contract award, with firm fixed pricing and zero variance allowed in quantity. Inspection and acceptance occur at the destination port, and items must be shipped FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging per ASTM D3951 and MIL-STD-129 labeling, adherence to DLA packaging standards RP001, and palletization in compliance with RP001. Physical identification of bare items must follow RQ017, and government identification must be removed from non-accepted supplies per RQ011. Item Unique Identification is not required. Special processes highlighted in yellow on drawing 20145214 must be performed by NADCAP-certified organizations. Sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively. The supplier must comply with ISO 9001:2015 quality requirements and complete a CMMC Level 2 self-assessment. All documentation must align with the DLA Master List version effective on the RFP issue date. Packaging and shipping instructions specify delivery to Tinker AFB, Oklahoma, with transportation protocols governed by DLAD Proc Note C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 336413
New
DIBBS
Supply of Ground Servicing Roller Units (NSN 1730-01-256-2371)The contract calls for the manufacture and delivery of two ground servicing roller units identified by NSN 1730-01-256-2371, with all items required to meet stringent military packaging, labeling, and regulatory standards to ensure compatibility with defense logistics systems. The work is governed under a small business set-aside classification, exclusively available to small business concerns as defined by the SBA under FAR 19.5, and falls under the NAICS code 336413, indicating the nature of the industry as aircraft and other aerospace product manufacturing. Delivery must be performed to the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all units must be fully compliant with DoD technical and procedural requirements. The solicitation was posted on August 2, 2026, and responses must be submitted no later than August 13, 2026, with the contracting activity managed by the Department of Defense under the agency name Construction & Equipment Manu & Con. The contract is structured as a subcontract, indicating it may involve supply chain coordination through primary contractors fulfilling broader government obligations. While no point of contact details are listed, bidders must adhere to the submission guidelines via the DIBBS portal linked in the notice, ensuring all documentation and certifications align with federal procurement regulations for defense supply contracts.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Engine Harness ManufacturingThe contract requires the manufacture of a single LH engine harness identified by part number 209-375-105-101, encompassing all phases from initial design validation through final documentation, in strict compliance with military and Defense Logistics Agency standards. The scope includes sourcing qualified components, precise assembly, rigorous testing to ensure performance and reliability, and comprehensive technical documentation meeting required specifications. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and the contractor is expected to adhere to the North American Industry Classification System code 336413, which pertains to aircraft engine and engine parts manufacturing. This is a subcontract opportunity with a response deadline of August 10, 2026, solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, though no specific set-aside status or point of contact is detailed in the available information.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Wheel Assembly Supply (NSN 1630-01-418-3165)The contract seeks the supply of five aircraft wheel assemblies meeting military specifications under NSN 1630-01-418-3165, requiring full manufacturing or sourcing compliance with all applicable technical and quality standards. Each assembly must be marked with an Item Unique Identification in accordance with RQ017 requirements to ensure traceability throughout the defense logistics system. The deliverables are to be prepared for FOB Origin delivery, meaning the contractor is responsible for packaging and readiness at the point of shipment, with final inspection to occur at the destination. The procurement is classified as a subcontract under NAICS code 336413, managed by the ASC Commodities Division of the Department of Defense, with performance centered at New Cumberland, Pennsylvania, zip code 17070-5002. Responses must be submitted by August 10, 2026, with the solicitation posted publicly on August 2, 2026, through the DIBBS platform for potential vendors to access full details and submit proposals.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Aerospace Component Manufacturing – Strip Wing (NSN 1560-01-608-2561)The contract requires the manufacture or sourcing of a single Strip Wing unit, identified by NSN 1560-01-608-2561, in strict compliance with U.S. military specifications and all applicable technical and quality standards set by the Defense Logistics Agency. Full traceability of materials, components, and manufacturing processes is mandatory to ensure accountability and adherence to defense-grade requirements. The work must meet the rigorous quality controls defined by DLA, with documentation supporting every step from raw material sourcing to final assembly. This is a subcontract opportunity under the NAICS code 336413, assigned by the ASC Commodities Division of the Department of Defense, and is open for responses until August 10, 2026. The place of performance and contact details are not specified, but all deliverables must be aligned with the technical and logistical expectations of the Department of Defense’s aerospace supply chain.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
First Article Testing (FAT) Unit Delivery and Government Review SupportThe contract requires the production and delivery of a single prototype actuator cap unit for government inspection as part of a First Article Testing process. This unit must be manufactured to exact specifications and accompanied by comprehensive First Article Inspection documentation to verify compliance with all technical and quality requirements. The supplier is obligated to provide full technical support throughout a 150-day government review period during which the prototype will be evaluated for conformance, performance, and readiness for potential production. The work is to be performed at Hill Air Force Base with a zip code of 84056-5734, under a subcontract classified under NAICS code 336413 for aircraft parts and accessories manufacturing. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Crutch Pad Assembly ManufacturingThe contract requires the manufacture of three Crutch Pad Assemblies identified by NSN 1095-00-519-6488 and Part Number AJJ6193-1501A, fully compliant with all technical specifications, material standards, and performance requirements established by the Defense Logistics Agency. The work must adhere to stringent defense-specific guidelines to ensure reliability and conformity for military use, with the final products designated for delivery to the place of performance in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation is classified as a subcontract under NAICS code 336413, indicating the involvement of specialized defense manufacturing, and the deadline for responses is August 13, 2026. All submissions must be submitted through the official DIBBS platform before the closing time on the deadline date.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
High-Integrity Rotorcraft Inlet/Exhaust Seal System (HIRSS) Plug ManufacturingThe contract seeks the manufacture and delivery of a critical High-Integrity Rotorcraft Inlet/Exhaust Seal System (HIRSS) inlet plug, identified by part number 70700-20514-042 and national stock number 1730-01-246-6758, for use in military rotorcraft. This component must be produced in full compliance with stringent defense-quality standards, including rigorous traceability and identification protocols to ensure operational integrity and accountability throughout its lifecycle. The item is essential for mission-critical systems, necessitating adherence to all applicable military specifications, material certifications, and inspection requirements. The procurement is structured as a subcontract under the Department of Defense, with performance required at a location in Boise, Idaho, 83705-8078. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The North American Industry Classification System code 336413 indicates focus on aerospace product and parts manufacturing, emphasizing the specialized nature of the work. All deliverables must meet exacting国防标准 and include documented proof of compliance with quality assurance, material sourcing, and end-to-end component tracking to ensure alignment with defense procurement protocols.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
Supply of Insulation and Support Component (COTS)The contract calls for the manufacture or sourcing of a single military-grade commercial off-the-shelf insulation and support component, identified by part number 02250158-385 and NSN 1680-01-649-5646, fully compliant with Defense Logistics Agency technical standards. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Cherry Point, North Carolina, ZIP code 28533-8051. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with no set-aside restrictions applied. The NAICS code 336413 confirms the scope falls within aerospace product and parts manufacturing, emphasizing precision and defense-grade reliability. All deliverables must meet stringent quality and compliance benchmarks expected for military applications.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
Precision Aerospace Component Manufacturing – Aircraft Control StickA flight-critical aircraft control stick must be manufactured and delivered in full compliance with established military specifications, with rigorous attention to traceability, quality assurance, and configuration management procedures as required by the Defense Logistics Agency. The component is essential to aircraft operability and must meet exacting performance, material, and dimensional standards to ensure mission safety and readiness. All manufacturing processes must be controlled and documented to maintain full lineage of materials, parts, and inspections throughout the production lifecycle. This subcontract opportunity is issued under NAICS code 336413 and is managed by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, with a response deadline of August 10, 2026. The work is subject to stringent defense contracting protocols, including adherence to Federal Acquisition Regulation standards, and requires full compliance with DLA’s quality and documentation requirements. Bidders must demonstrate proven capability in producing flight-critical aerospace components, with established systems for quality control, records retention, and configuration control to support ongoing military operations and sustainment.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLUG, INLET, HIRSS
Solicitation # SPE8EF-26-T-1538
The contract pertains to the procurement of one unit of a PLUG, INLET, HIRSS with NSN 1730-01-246-6758 and part number 70700-20514-042, supplied by SIKORSKY AIRCRAFT CORPORATION and AIRBORNE INDUSTRIES INC. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. The item is designated as a critical application item and must comply with Item Unique Identification (IUID) standards per MIL-STD-130 and the DFARS 252.211-7003 clause. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA packaging regulations, with palletization following RP001 guidelines. Sampling for acceptance follows the SIKORSKY CORP QAP 1201 alternative plan, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The item must be shipped via the fastest traceable method, excluding parcel post, with delivery directed to a designated U.S. Army facility in Boise, Idaho. The shipment is identified by RDD 777 and is tied to project TP 3 under contract SPE8EF-26-T-1538. The original required delivery date is August 3, 2026, and the contract includes provisions for configuration change management, variance requests, removal of government identification from non-accepted supplies, and compliance with measuring and test equipment standards. All documentation and compliance actions are subject to the DLA Master List revision effective on the solicitation date.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
HARNESS, ENGINE, LH, A
Solicitation # SPE4A5-26-T-318P
The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 561910
New
DIBBS
Packaging, Labeling, and Kitting Services for DLA DeliveriesThe contract solicits end-to-end packaging, preservation, labeling, and kitting services for aerospace components to be delivered FOB origin in strict compliance with Defense Logistics Agency standards. All work must adhere to DLA’s technical and procedural requirements to ensure components are properly protected, identified, and assembled for military use. The services are classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 561910 designates this as a support services activity within the waste management and remediation sector, though the nature of the work clearly aligns with specialized logistics and supply chain support for defense equipment. The solicitation was posted on August 3, 2026, with a firm response deadline of September 1, 2026, and is managed by the ASC Supplier Operations AE and AF Division under the Department of Defense. While the exact place of performance and agency office details are unspecified, delivery obligation is clearly defined at FOB origin, placing responsibility for logistics planning on the contractor. The contract is accessible through the DIBBS platform, and all prospective offerors are expected to comply with federal acquisition regulations and DLA-specific documentation standards. Participation is restricted to small businesses, making this an opportunity dedicated exclusively to qualified small business entities operating in the defense logistics space.
Packaging and Labeling Services

POSTED

about 4 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Cushion (Aircraft Interior Component)The contract mandates the manufacture of ergonomic and durable aircraft seat cushions designed for military use, adhering strictly to Department of Defense packaging and quality standards. The product must meet rigorous performance criteria to ensure soldier safety, comfort, and long-term reliability under extreme operational conditions. All items must be produced in compliance with Federal Acquisition Regulation guidelines and delivered in accordance with DoD-specific packaging protocols to maintain integrity during transport and storage. This is a small business set-aside subcontract under NAICS code 339920, reserved exclusively for small business concerns as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, with a deadline for responses set for September 1, 2026. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while specific performance locations and points of contact are not detailed, the work is intended to support military aircraft interior systems. Interested vendors must submit proposals through the official DIBBS portal prior to the deadline to be considered.
Sporting and Athletic Goods Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 29 days
View Details
NAICS: 339920
New
DIBBS
Manufacture of Aircraft Seat Back Cushion (Critical Life Support Component)The contract seeks the manufacture of a critical life support component—an aircraft seat back cushion—designed to meet stringent aviation safety and durability standards for military aircraft. The product must be fire-resistant and engineered for long-term performance under extreme conditions, ensuring crew safety and compliance with military life support requirements. The solicitation is specifically set aside for small businesses under the SBA’s Total Small Business Set-Aside program, as defined by FAR 19.5, ensuring opportunities for qualified small enterprises to compete. The North American Industry Classification System code 339920 categorizes this as the manufacturing of other miscellaneous fabricated metal products, aligning with specialized components for aerospace applications. The proposal must be submitted by September 1, 2026, with the contract awarded under the Department of Defense, specifically by the ASC SUPPLIER OPER AE AND AF DIV. While the physical location of performance is not specified, the component is intended for use in military aircraft systems, requiring adherence to exacting technical and certification benchmarks. The contract is structured as a subcontract, indicating it may be part of a larger supply chain supporting broader defense aviation programs. Participation requires full capability to deliver certified, high-reliability components without compromise to safety, durability, or regulatory compliance, with the DLA’s DIBBS platform serving as the official portal for submission and related documentation.
Sporting and Athletic Goods Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336412
New
DIBBS
Manufacture of Aircraft Fairing, Back (FAA PMA or Equivalent)The contract entails the manufacture and delivery of a structural or aerodynamic aircraft back fairing designed for life support systems, requiring strict compliance with military specifications and form-fit-function criteria to ensure seamless integration into existing platforms. The product must meet all technical and performance standards associated with aerospace applications under defense mandates, and the manufacturing process must be validated for consistent quality and reliability in operational environments. This is a small business set-aside subcontract categorized under NAICS code 336412, exclusively available to small businesses as defined by the Small Business Administration. The solicitation was posted on August 3, 2026, with responses required by September 1, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are unspecified, but the contract is accessible via the DIBBS portal for qualified bidders seeking to fulfill this defense-related procurement.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 29 days
View Details
NAICS: NA
New
DIBBS
Unable to Retrieve Subcontract OpportunitiesThe contract opportunity titled "Unable to Retrieve Subcontract Opportunities" was posted on August 3, 2026, with a response deadline set for September 2, 2026. It is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, as defined by the Small Business Administration and FAR 19.5. The solicitation number SPE4A726R0674 is associated with this opportunity, which is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. However, critical details including the NAICS code, place of performance, point of contact, and the prime contract context are unavailable due to a system timeout. The location, agency office address, and specific performance requirements cannot be determined from the provided data, and no further decomposition or subcontracting structure can be identified at this time. Interested parties are directed to the provided UI link for potential updates or additional information.

POSTED

about 4 hours ago

DEADLINE

in 30 days
View Details
New
DIBBS
CUSHION, SEAT, AIRCRA
Solicitation # SPE4A7-26-R-0665
This contract is a Long-Term Contract for an Indefinite Quantity Contract under solicitation SPE4A7-26-R-0665, targeting the procurement of three life support items: a fairing back with part number 0A066-0689XA, and two seat back cushions with part numbers 0-A-066-0487 and 0A066-0483, each with specified quantities of 120 and 200 units respectively. These items are classified as critical application life support items, and no surplus material will be accepted. The contract is a total small business set-aside, with no requirement for certified cost or pricing data or a subcontracting plan. Approved manufacturers for these NSNs are IPECO and Jet Repair, and while specification drawings are not available from the government, the items must meet established requirements. Delivery is FOB origin from stock locations in New Cumberland, PA, and Tracy, CA, with inspection and acceptance also occurring at origin. The solicitation was posted on July 17, 2026, with responses due by July 31, 2026, and is administered by the Department of Defense through DLA Aviation in Richmond, VA. Evaluation for award will consider a combination of price, past performance, and other factors outlined in the solicitation. All documentation is available exclusively online via the DLA DIBBS website starting August 3, 2026, with no paper copies provided. Potential offerors must access the solicitation through the DIBBS portal using PDF-capable software, and the NAICS code for this procurement is 336413. Primary and secondary points of contact are provided for inquiries regarding the opportunity.

POSTED

about 4 hours ago

DEADLINE

in 29 days
View Details
NAICS: 484220
New
DIBBS
Specialized Freight and Hazmat TransportationThe contract requires the specialized transport of spill containment kits to Tracy, California, ensuring full compliance with Department of Defense logistics and hazardous materials transportation policies. All shipments must be accurately labeled with proper hazmat markings and accompanied by complete, compliant documentation as mandated by DLA standards. The work falls under NAICS code 484220, classifying it as specialized freight transportation, and is structured as a subcontract with a response deadline of August 10, 2026. The place of performance is specified as Tracy with the postal code 95304-5000, and the ordering activity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The contract was posted on August 2, 2026, and all offerors must adhere to the regulatory and operational protocols governing the movement of hazardous materials in government supply chains.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance and Labeling ServicesThe contract titled Hazardous Materials Compliance and Labeling Services requires the provision of regulatory compliance services for hazardous materials, specifically focusing on the preparation of hazard warning labels and Safety Data Sheets in accordance with OSHA and Department of Defense standards. The work is classified under NAICS code 541620 and is structured as a subcontract, with performance required at Tracy, California, ZIP 95304-5000. The solicitation was posted on August 2, 2026, and responses must be submitted by August 10, 2026, with the contracting activity under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. All deliverables must strictly adhere to federal safety regulations to ensure accurate documentation and labeling of hazardous substances used in military and defense operations.
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 339920
New
DIBBS
Spill Containment Kit Supply and PackagingThe contract involves the manufacture, assembly, and packaging of spill containment kits to meet stringent military and federal hazardous materials standards, specifically MIL-STD-129 and DLA packaging guidelines. Work must be performed in strict compliance with these requirements to ensure proper labeling, marking, and documentation for defense logistics operations. The kits are intended for use by the Department of Defense and must be delivered to the designated place of performance in Tracy, California, with a zip code of 95304-5000. The North American Industry Classification System code 339920 indicates the scope falls under other miscellaneous manufacturing. Subcontracting opportunities are open under this solicitation, with responses due by August 10, 2026, and the opportunity was posted on August 2, 2026. All parties must comply with DLA’s procurement protocols and packaging specifications as mandated for military hazmat logistics. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while no point of contact is listed, further details can be accessed through the official DIBBS RFQ portal using the provided link. Compliance with all federal and military packaging standards is non-negotiable and critical to successful bid evaluation and contract award.
Sporting and Athletic Goods Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication and Labeling ComplianceThe contract requires strict adherence to hazardous materials labeling standards under OSHA 29 CFR 1910.1200 and DFARS 252.223-7001, ensuring all chemicals and hazardous substances are properly marked with required hazard information, identifiers, and precautionary statements. Contractors must comply with federal regulations governing workplace safety and defense supply chain communication, and are expected to submit any alternative labeling proposals for approval if standard requirements cannot be met. The work is tied to a subcontract under the NAICS code 541690, indicating it involves other scientific and technical consulting services, and performance must occur at Fort Riley, Kansas, with a ZIP code of 66442-0000. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance is specifically identified as Fort Riley, and the contract is part of the Defense Logistics Agency’s procurement system, accessible via the DIBBS platform. While no set-aside type is specified, the nature of the work implies the need for specialized expertise in regulatory compliance, documentation, and hazardous material handling to meet military and occupational safety mandates.
Other Scientific and Technical Consulting Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Quality Assurance and Inspection ServicesThe contract requires the performance of origin inspection and conformance testing in accordance with MIL-STD-1916 or ASQ H1331 standards to ensure zero defects in critical and major attributes of supplied items. This includes rigorous verification processes to confirm that all components meet specified quality requirements before acceptance, with mandatory issuance of a Certificate of Conformance to document compliance. The work is categorized as a subcontract under NAICS code 541380 and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with all performance obligations centered at Fort Riley, Kansas, ZIP 66442-0000. Interested parties must submit responses by August 10, 2026, following the solicitation posted on August 2, 2026, through the DIBBS system.
Testing Laboratories and Services

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 493190
New
DIBBS
Military-Grade Packaging, Preservation, and MarkingThe contract requires compliance with MIL-STD-2073-1E standards for packaging, ensuring the finished defense component is securely enclosed to withstand transportation and long-term storage conditions. It mandates CLNG/DRY preservation methods to protect the component from corrosion and environmental degradation, maintaining its operational integrity throughout its lifecycle. In addition, all items must be marked in strict accordance with MIL-STD-129, ensuring proper identification, traceability, and handling throughout the military supply chain. The work is to be performed at Fort Riley, Kansas, with a response deadline of August 10, 2026, and is structured as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV. The North American Industry Classification System code 493190 indicates this effort falls under other transportation support activities, emphasizing the critical nature of logistics and compliance in defense component handling.
Other Warehousing and Storage

POSTED

1 day ago

DEADLINE

in 7 days
View Details