Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

First Article Testing (FAT) Unit Delivery and Government Review Support

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the production and delivery of a single prototype actuator cap unit for government inspection as part of a First Article Testing process. This unit must be manufactured to exact specifications and accompanied by comprehensive First Article Inspection documentation to verify compliance with all technical and quality requirements. The supplier is obligated to provide full technical support throughout a 150-day government review period during which the prototype will be evaluated for conformance, performance, and readiness for potential production. The work is to be performed at Hill Air Force Base with a zip code of 84056-5734, under a subcontract classified under NAICS code 336413 for aircraft parts and accessories manufacturing. The solicitation was posted on August 2, 2026, with a response deadline of August 10, 2026, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV.

General Info

Produce and deliver one prototype actuator cap for government inspection at Hill AFB with full FAI documentation and 150-day technical support.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

HILL AFB, UT, 84056-5734, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 2

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production and delivery of one prototype actuator cap unit for government inspection, including full FAI documentation and technical support during 150-day review period.

Similar Contracts

Same NAICS industry code

Supply of Ground Servicing Roller Units (NSN 1730-01-256-2371)The contract calls for the manufacture and delivery of two ground servicing roller units identified by NSN 1730-01-256-2371, with all items required to meet stringent military packaging, labeling, and regulatory standards to ensure compatibility with defense logistics systems. The work is governed under a small business set-aside classification, exclusively available to small business concerns as defined by the SBA under FAR 19.5, and falls under the NAICS code 336413, indicating the nature of the industry as aircraft and other aerospace product manufacturing. Delivery must be performed to the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all units must be fully compliant with DoD technical and procedural requirements. The solicitation was posted on August 2, 2026, and responses must be submitted no later than August 13, 2026, with the contracting activity managed by the Department of Defense under the agency name Construction & Equipment Manu & Con. The contract is structured as a subcontract, indicating it may involve supply chain coordination through primary contractors fulfilling broader government obligations. While no point of contact details are listed, bidders must adhere to the submission guidelines via the DIBBS portal linked in the notice, ensuring all documentation and certifications align with federal procurement regulations for defense supply contracts.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

Aircraft Engine Harness ManufacturingThe contract requires the manufacture of a single LH engine harness identified by part number 209-375-105-101, encompassing all phases from initial design validation through final documentation, in strict compliance with military and Defense Logistics Agency standards. The scope includes sourcing qualified components, precise assembly, rigorous testing to ensure performance and reliability, and comprehensive technical documentation meeting required specifications. The work must be performed at the specified place of performance in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and the contractor is expected to adhere to the North American Industry Classification System code 336413, which pertains to aircraft engine and engine parts manufacturing. This is a subcontract opportunity with a response deadline of August 10, 2026, solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, though no specific set-aside status or point of contact is detailed in the available information.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Crutch Pad Assembly ManufacturingThe contract requires the manufacture of three Crutch Pad Assemblies identified by NSN 1095-00-519-6488 and Part Number AJJ6193-1501A, fully compliant with all technical specifications, material standards, and performance requirements established by the Defense Logistics Agency. The work must adhere to stringent defense-specific guidelines to ensure reliability and conformity for military use, with the final products designated for delivery to the place of performance in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation is classified as a subcontract under NAICS code 336413, indicating the involvement of specialized defense manufacturing, and the deadline for responses is August 13, 2026. All submissions must be submitted through the official DIBBS platform before the closing time on the deadline date.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

High-Integrity Rotorcraft Inlet/Exhaust Seal System (HIRSS) Plug ManufacturingThe contract seeks the manufacture and delivery of a critical High-Integrity Rotorcraft Inlet/Exhaust Seal System (HIRSS) inlet plug, identified by part number 70700-20514-042 and national stock number 1730-01-246-6758, for use in military rotorcraft. This component must be produced in full compliance with stringent defense-quality standards, including rigorous traceability and identification protocols to ensure operational integrity and accountability throughout its lifecycle. The item is essential for mission-critical systems, necessitating adherence to all applicable military specifications, material certifications, and inspection requirements. The procurement is structured as a subcontract under the Department of Defense, with performance required at a location in Boise, Idaho, 83705-8078. The solicitation was posted on August 2, 2026, and responses are due by August 13, 2026. The North American Industry Classification System code 336413 indicates focus on aerospace product and parts manufacturing, emphasizing the specialized nature of the work. All deliverables must meet exacting国防标准 and include documented proof of compliance with quality assurance, material sourcing, and end-to-end component tracking to ensure alignment with defense procurement protocols.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

PLUG, INLET, HIRSS

Solicitation # SPE8EF-26-T-1538

The contract pertains to the procurement of one unit of a PLUG, INLET, HIRSS with NSN 1730-01-246-6758 and part number 70700-20514-042, supplied by SIKORSKY AIRCRAFT CORPORATION and AIRBORNE INDUSTRIES INC. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity. The item is designated as a critical application item and must comply with Item Unique Identification (IUID) standards per MIL-STD-130 and the DFARS 252.211-7003 clause. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and DLA packaging regulations, with palletization following RP001 guidelines. Sampling for acceptance follows the SIKORSKY CORP QAP 1201 alternative plan, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. The item must be shipped via the fastest traceable method, excluding parcel post, with delivery directed to a designated U.S. Army facility in Boise, Idaho. The shipment is identified by RDD 777 and is tied to project TP 3 under contract SPE8EF-26-T-1538. The original required delivery date is August 3, 2026, and the contract includes provisions for configuration change management, variance requests, removal of government identification from non-accepted supplies, and compliance with measuring and test equipment standards. All documentation and compliance actions are subject to the DLA Master List revision effective on the solicitation date.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 8 hours ago

DEADLINE

HARNESS, ENGINE, LH, A

Solicitation # SPE4A5-26-T-318P

The contract pertains to the procurement of three engine left-hand harnesses, part number 209-375-105-101, under solicitation SPE4A5-26-T-318P, with a delivery requirement of 398 days and an original ship date of September 13, 2027. The item is source-controlled, meaning it must be manufactured and tested strictly in accordance with limited rights data held by approved sources, primarily First Electronics Corp. with CAGE code 14532, and no other vendor may quote without prior source approval and submission of a Source Approval Request package. Inspection and acceptance occur at origin, following MIL-STD-1916 or equivalent zero-based sampling plans with stringent acceptance criteria: critical attributes require a zero-defect standard, major attributes are sampled at AQL 1.0, and unspecified attributes are treated as major. The item is classified as a critical application and is subject to DLA’s Master List of Technical and Quality Requirements, which supersede other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA packaging guidelines, with no variation permitted in quantity. The contract includes cybersecurity compliance requirements under CMMC Level 2 self-assessment and mandates physical identification marking per RQ017. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, PA, with all documentation, traceability, and testing records retained by the supplier. The unit of issue is each (EA), priced at $3.00 per unit for a total value of $9.00.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

UPLOCK ASSEMBLY, SWA

Solicitation # SPE7LX-26-U-9124

The contract pertains to the procurement of a UPLOCK ASSEMBLY, SWAYBRACE with NSN 1095012849952 and part number 116018-1, supplied by L3HARRIS TECHNOLOGIES, INC. under solicitation SPE7LX-26-U-9124. Six units are required at a unit price of $6.00, totaling $36.00, with delivery required within 21 days FOB origin. The item is classified as a critical application item and falls under DLA DIRECT, CONUS coverage. The contract incorporates mandatory technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization strictly adhering to specified guidelines. The Government prohibits acceptance of surplus stock, and any non-accepted supplies must have government identification removed. Demilitarization procedures for Category I munitions items apply, and the supplier must complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Inspection and acceptance occur at the destination, with zero variance allowed in quantity. The unit of issue is each (EA), and the procurement is subject to DoD authorized units of measure.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE4A6-26-Q-1212

The contract pertains to the procurement of one unit of a Strip Wing identified by NSN 1560-01-608-2561, with a delivery requirement of 111 days after contract award. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment specifies a later revision. The item is subject to Covered Defense Information requirements and must comply with DLA packaging standards. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the point of origin. Government identification must be removed from non-accepted supplies, and physical identification or bare item marking is required. Item Unique Identification is not mandated per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exception. Technical data associated with the item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons anywhere in the world, and DFARS 252.225-7048 is fully applicable. Access to this controlled data is restricted to contractors holding valid US/Canada Joint Certification Program certification, who have completed mandatory DLA training and questionnaire, and have received explicit approval from the DLA controlling authority. The solicitation number is SPE4A6-26-Q-1212, issued on August 2, 2026, with responses due by August 10, 2026, and the contracting office is the ASC Commodities Division under the Department of Defense, with Bryan Distin listed as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

GOVERNMENT FIRST ARTIC

Solicitation # SPE4A7-26-T-605H

This contract pertains to the procurement of six structural fitting components identified by NSN 0001S00000052 under solicitation SPE4A7-26-T-605H, with a delivery deadline of 588 days after contract award. The requirement is set aside exclusively for small businesses as defined under FAR 19.5, with the NAICS code 336413 indicating the classification under Aerospace Product and Parts Manufacturing. Technical and quality standards referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with specific identifiers R and I directing compliance to documented criteria. The deliverables must adhere to DLA packaging standards and include mandatory documentation for source approval requests. The item is subject to stringent export controls under ITAR or EAR, restricting technical data sharing without explicit authorization, and access is limited to contractors with approved JCP certification, completed DOD export training, and DLA authorization. Compliance with configuration change management is required through engineered change proposals for any deviations or waivers. Inspection and acceptance must occur at the origin, and non-accepted supplies must have all government identification removed. The item includes components governed by Qualified Products Lists or Qualified Manufacturers Lists, necessitating qualification per procurement note H02. Physical marking of the bare item is mandated, though Unique Item Identification is waived per customer request under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance requires CMMC Level 2 certification by an approved third-party assessment organization. Data related to this procurement is classified as Covered Defense Information under RD002, and the point of contact for inquiries is April Reed at the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 2, 2026, with responses due by August 10, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-605E

This contract is for the procurement of two hydraulic fluid filter assemblies with NSN 1650-00-831-8146 under solicitation SPE4A7-26-T-605E, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The requirement is a Total Small Business Set-Aside under NAICS code 336413, with a response deadline of August 10, 2026, and a delivery date 207 days after contract award. Technical data associated with the item is subject to export control under ITAR or EAR, prohibiting any unauthorized disclosure to foreign persons, regardless of location, and applies to all parties including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and cleared access through DLA may receive the technical data. The place of performance is Robins Air Force Base, Georgia, and the primary point of contact is April Reed, reachable via email and phone provided.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

ARMOR, SUPPLEMENTAL,

Solicitation # SPE4A7-26-T-606G

The contract is for one unit of supplemental armor for small arms fragmentation, sourced from Foster-Miller, Inc. with CAGE code 30233 and NSN 1560-01-434-6349, under solicitation number SPE4A7-26-T-606G. Delivery is required within 20 days FOB origin to North Kingston, Rhode Island, with no tolerance for quantity variance. The item is designated as a critical application and must comply with stringent technical and quality standards referenced from the DLA Master List, including ISO 9001:2015 for quality management and MIL-STD-1916 or comparable zero-based sampling plans for inspection, with zero non-conformances required unless otherwise specified. The supplier must adhere to rigorous packaging directives including MIL-STD-2073-1E and MIL-STD-129 for marking, while also following Qinetiq Packaging Instruction 1210300059 and DLA packaging requirements. Item Unique Identification is not required per customer request, and government identification must be removed from non-accepted supplies. Cybersecurity Maturity Model Certification Level 2 self-assessment is mandatory, and hazardous materials shipping procedures must be followed per IP025. Shipping must occur via the fastest traceable means—parcel post is explicitly prohibited. The contract includes detailed inspection and acceptance at destination and specifies the responsible government point of contact as April Reed of the Department of Defense, with an original required delivery date of June 2, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

INSULATION, SUPPORT

Solicitation # SPE4A7-26-T-606D

The contract specifies the procurement of a commercial off-the-shelf (COTS) insulation and support item identified by part number 02250158-385 and NSN 1680-01-649-5646, with a quantity of one unit to be delivered within five days under the solicitation SPE4A7-26-T-606D. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the item must be packaged in accordance with ASTM D3951 while strictly adhering to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling, and RP001 for packaging standards. Sampling requirements mandate compliance with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. The item must be palletized per DLA requirements, labeled with the assigned unit of issue, and shipped via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is Marine Aviation Logistics Squadron 14 at MCAS Cherry Point, North Carolina, with the original required delivery date set for March 4, 2026. All technical and quality provisions referenced in the DLA Master List take precedence over other standards, and the contract includes detailed shipping, identification, and government-only fields for logistics and tracking purposes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Specialized Freight and Hazmat TransportationThe contract requires the specialized transport of spill containment kits to Tracy, California, ensuring full compliance with Department of Defense logistics and hazardous materials transportation policies. All shipments must be accurately labeled with proper hazmat markings and accompanied by complete, compliant documentation as mandated by DLA standards. The work falls under NAICS code 484220, classifying it as specialized freight transportation, and is structured as a subcontract with a response deadline of August 10, 2026. The place of performance is specified as Tracy with the postal code 95304-5000, and the ordering activity is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The contract was posted on August 2, 2026, and all offerors must adhere to the regulatory and operational protocols governing the movement of hazardous materials in government supply chains.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling ServicesThe contract titled Hazardous Materials Compliance and Labeling Services requires the provision of regulatory compliance services for hazardous materials, specifically focusing on the preparation of hazard warning labels and Safety Data Sheets in accordance with OSHA and Department of Defense standards. The work is classified under NAICS code 541620 and is structured as a subcontract, with performance required at Tracy, California, ZIP 95304-5000. The solicitation was posted on August 2, 2026, and responses must be submitted by August 10, 2026, with the contracting activity under the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. All deliverables must strictly adhere to federal safety regulations to ensure accurate documentation and labeling of hazardous substances used in military and defense operations.

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

Spill Containment Kit Supply and PackagingThe contract involves the manufacture, assembly, and packaging of spill containment kits to meet stringent military and federal hazardous materials standards, specifically MIL-STD-129 and DLA packaging guidelines. Work must be performed in strict compliance with these requirements to ensure proper labeling, marking, and documentation for defense logistics operations. The kits are intended for use by the Department of Defense and must be delivered to the designated place of performance in Tracy, California, with a zip code of 95304-5000. The North American Industry Classification System code 339920 indicates the scope falls under other miscellaneous manufacturing. Subcontracting opportunities are open under this solicitation, with responses due by August 10, 2026, and the opportunity was posted on August 2, 2026. All parties must comply with DLA’s procurement protocols and packaging specifications as mandated for military hazmat logistics. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while no point of contact is listed, further details can be accessed through the official DIBBS RFQ portal using the provided link. Compliance with all federal and military packaging standards is non-negotiable and critical to successful bid evaluation and contract award.

Sporting and Athletic Goods Manufacturing

POSTED

about 8 hours ago

DEADLINE

Military-Grade Packaging, Marking & PreservationThe contract requires the packaging, preservation, and marking of pressure switches in strict compliance with MIL-STD-129 and MIL-DTL-28786 standards, ensuring all items meet military-grade requirements for handling, storage, and shipment. A critical component involves the complete removal of any existing government identifiers and the application of ZZ-coded preservation techniques to protect components from environmental degradation during transit and long-term storage. The work must be performed to exact specifications to guarantee readiness and compatibility with military logistics systems. The solicitation is classified as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The place of performance is designated as New Cumberland, Pennsylvania, with a response deadline of August 10, 2026. All submissions must adhere to the outlined military standards without exception, and the contract emphasizes precision in labeling, preservation, and compliance with defense logistics protocols. No set-aside provisions are specified, indicating open competition for qualified subcontractors.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Compliance & Safety Data Sheet (SDS) PreparationThe contract requires identification of hazardous materials used in manufacturing or packaging processes and the preparation of Safety Data Sheets compliant with OSHA’s 29 CFR 1910.1200 regulations. This work is critical to ensuring proper hazard communication, worker safety, and regulatory adherence across all applicable operations. The contractor must possess the expertise to accurately assess chemical substances, classify hazards according to GHS standards, and generate complete, up-to-date SDS documents that meet federal requirements. This subcontract is issued under NAICS code 541620, indicating a focus on environmental consulting services, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. Performance is required at the location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, creating a short window for qualified vendors to submit proposals. No set-aside designation is specified, meaning the opportunity is open to all eligible subcontractors regardless of size or status.

Environmental Consulting Services

POSTED

about 8 hours ago

DEADLINE

Quality Assurance & Conformance Testing ServicesThe contract entails independent testing and inspection of pressure switches to ensure full compliance with either MIL-STD-1916 or ASQ H1331 zero-defect sampling plans, requiring rigorous quality control measures to confirm product integrity and performance. Upon successful verification, a Certificate of Conformance must be issued to formally document adherence to the specified military and quality standards. The work is categorized as a subcontract under NAICS code 541380, assigned to the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, with performance required at the designated location in New Cumberland, Pennsylvania, ZIP code 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, with no set-aside provisions specified. All activities must align with the Department of Defense’s quality expectations and deliverables without deviation from the outlined testing protocols.

Testing Laboratories and Services

POSTED

about 8 hours ago

DEADLINE

Precision Electromechanical Component ManufacturingThe contract requires the manufacture of two precision pressure switches identified by NSN 5930016901720, built to strict military specifications covering all phases from material sourcing and machining to assembly, calibration, and final inspection. The work must adhere to rigorous quality standards appropriate for defense applications, ensuring reliability and performance under demanding operational conditions. All production activities are to be conducted in accordance with approved military and industry protocols, with the final deliverables subject to comprehensive verification and acceptance testing. The procurement is issued as a subcontract under the NAICS code 335313, which categorizes it within the electrical equipment manufacturing sector, and is managed by the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. The place of performance is designated as New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 2, 2026, and responses are due by August 10, 2026, providing a limited eight-day window for submissions. The contract is not subject to any specific set-aside provisions, and all interested parties must meet the technical and compliance requirements outlined in the military specifications to be eligible for award.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 8 hours ago

DEADLINE

Packaging and Preservation ServicesThe contract requires the packaging and preservation of finished brackets in strict accordance with MIL-STD-2073-1E standards, ensuring comprehensive moisture protection, proper unitization, and full shipment readiness for delivery to Anniston, Alabama. All work must conform to defense-grade preservation protocols to safeguard components during storage and transit, with attention to environmental controls, labeling, and secure packaging to prevent damage or degradation. The scope encompasses end-to-end preparation of finished brackets for military logistics, ensuring compliance with federal military specifications from initial packaging through final shipment. This is a total small business set-aside subcontract under NAICS code 493190, exclusively available to small businesses as defined by the SBA, and is issued by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV. Proposals must be submitted by August 10, 2026, with performance centered at the Anniston, AL delivery point, with zip code 36201-4199. The requirement is part of a broader defense logistics effort, emphasizing reliability, adherence to military standards, and readiness for immediate incorporation into military supply chains.

Other Warehousing and Storage

POSTED

about 8 hours ago

DEADLINE

Hazard Communication and Labeling ComplianceThe contract pertains to the application and verification of hazard warning labels in accordance with DFARS 252.223-7001 to ensure full compliance with federal hazard communication standards for the safe handling and transportation of regulated materials. It requires strict adherence to labeling protocols that align with federal mandates, covering accurate depiction of hazards, proper signage, and documentation to support regulatory compliance across the supply chain. The effort is scoped to fulfill obligations tied to the handling of hazardous substances by contractors operating under the auspices of the U.S. Department of Defense. This is a small business set-aside subcontract classified under NAICS code 561990, reserved exclusively for small businesses as defined by the Small Business Administration. The opportunity was posted on August 2, 2026, with a response deadline of August 10, 2026. Performance is specifically required at the location in Anniston, Alabama, with a zip code of 36201-4199, under the administrative oversight of the ASC SUPPLIER OPER AE AND AF DIV. The contract is accessible via the DIBBS platform, and all participants must meet the specified regulatory, technical, and procedural requirements to ensure seamless integration with defense logistics and hazard communication systems.

All Other Support Services

POSTED

about 8 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks third-party inspection and quality assurance services to ensure compliance with MIL-STD-1916 or ASQ H1331 standards, encompassing sampling procedures, AQL verification, and reporting that meets federal government requirements. The services are critical for verifying product conformance on behalf of the Department of Defense, with all work to be performed at the specified place of performance in Anniston, Alabama, 36201-4199. This is a subcontract under a Total Small Business Set-Aside, restricted exclusively to small business concerns as defined by the SBA under NAICS code 541330, which pertains to professional, scientific, and technical services including quality control and inspection. Interested parties must submit responses by the deadline of August 10, 2026, with the solicitation posted on August 2, 2026. The contracting activity is managed by the ASC SUPPLIER OPER AE AND AF DIV, and all deliverables must adhere to military and federal quality assurance protocols. The scope demands precision in sampling methodology, statistical validation of quality metrics, and documentation that remains fully aligned with government compliance standards, ensuring transparency and accountability in the inspection process.

Engineering Services

POSTED

about 8 hours ago

DEADLINE

Precision Machining of Engine Accessory BracketThe contract calls for the manufacture of 101 precision-engineered BRACKET, ENGINE ACCESSORY units identified by NSN 5342012529503, to be produced in full compliance with Department of Defense and Defense Logistics Agency standards. The work encompasses all phases of production including material sourcing, precision machining, surface finishing, and secure packaging, ensuring each unit meets stringent military specifications for performance, durability, and reliability. The production must be executed under a Total Small Business Set-Aside as defined by FAR 19.5, restricting eligibility exclusively to small businesses certified under the SBA program, with the NAICS code 332510 classifying this activity under Machine Shops. Performance of the contract is designated to take place at a location in Anniston, Alabama with the zip code 36201-4199, and the solicitation falls under the procurement jurisdiction of the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The opportunity was posted on August 2, 2026, with a firm response deadline of August 10, 2026, and is structured as a subcontract. All interested small business vendors must submit their proposals through the DIBBS portal at the provided link prior to the deadline to be considered for award.

Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

Domestic Freight & Logistics (FOB Origin, U.S.-Flag Vessel Compliance)The contract requires the transport of a suspension line from the manufacturer to Camp Lejeune, North Carolina, under FOB origin terms, meaning the buyer assumes responsibility and risk once the goods are delivered to the carrier at the point of origin. Ocean transport, if needed, must be conducted exclusively using U.S.-flag vessels to comply with federal maritime regulations. Full shipment traceability is mandatory throughout the entire logistics chain, ensuring real-time visibility and accountability from origin to final delivery. The procurement is structured as a subcontract and falls under a Total Small Business Set-Aside, designated by the SBA, ensuring exclusive eligibility for small businesses as defined by the FAR. The NAICS code 484220 classifies this as a freight transportation arrangement, and the awarding agency is the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV. The response deadline is August 10, 2026, with the solicitation posted on August 2, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 8 hours ago

DEADLINE