Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

100kW Diesel Generator Supplier

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract agreement involves the procurement and delivery of a 100kW diesel emergency backup generator for infrastructure projects at the Port of Long Beach. The supplier is responsible for providing a unit that specifically meets the technical requirements for Sewer Lift Station 101 and ensures that all equipment complies with applicable federal, state, and local regulatory standards for diesel machinery. The project is situated in Long Beach, California, and falls under NAICS code 333611. The contract focuses on the successful provision and delivery of the generator unit to support prime contractors operating within the port's infrastructure framework.

General Info

Procurement and delivery of 100kW diesel backup generator for Port of Long Beach.

Agency

California → Long Beach, Port of

NAICS

333611 - Turbine and Turbine Generator Set Units Manufacturing

Place of Performance

Long Beach, CA

Set-Aside

NONE

Documents

This scope was carved out of Harbor Development Permit No. 26-027.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Backup Generator Installation and Entrance and Exit Driveway Construction for Sewer Lift Station 101 Harbor Development Permit No. 26-027

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 9

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Long Beach, Port of

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Long Beach, Port of

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies a 100kW diesel emergency backup generator for prime contractors on Port of Long Beach infrastructure projects. Provisions and delivers a 100-kilowatt diesel-powered generator unit meeting specifications for Sewer Lift Station 101. Equipment must meet federal, state, and local regulatory requirements for diesel equipment. Delivers the 100kW diesel generator unit.

Similar Contracts

Same NAICS industry code

Manufacture of Aircraft Gas Turbine Compressor Vane AssembliesThis subcontract involves the manufacture of 18 compressor vane assemblies for aircraft gas turbines on behalf of prime contractors for the DLA Weapons Support ASC Supplier OEM Division. The project requires the fabrication of stator vane assemblies according to NSN 2840008956103 specifications, utilizing precision aerospace machining and casting processes. Performance will take place in Corpus Christi, Texas. Strict adherence to quality and regulatory standards is mandatory, including MIL-STD-1916 and MIL-STD-105/ASQ Z1.4. Additionally, the contractor must maintain a CMMC Level 2 Self-Assessment and ensure full compliance with the Buy American Act and the Berry Amendment.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

Supply of CPI SATCOM Generator Set Component (PN: 0025-0P-3758)This subcontract involves the procurement and delivery of a specific generator set component, part number 0025-0P-3758, for prime contractors supporting Department of Defense supply contracts. The component, identified by NSN 6115-01-627-5690, must be sourced exclusively from CPI SATCOM and Antenna Technologies Inc. and delivered to a designated government facility in accordance with the DLA Master List of Technical and Quality Requirements. The agreement mandates strict adherence to regulatory standards, including compliance with covered telecommunications equipment regulations and NIST SP 800-171 cybersecurity standards. Managed under NAICS code 333611 and overseen by the Albany Transportation Officer, the contract requires the physical delivery of the hardware to meet agency specifications.

ALBANY TRANSPORTATION OFFICER

POSTED

about 12 hours ago

DEADLINE

VANE ASSEMBLY, COMPRESS

Solicitation # SPE4A5-27-T-2259

Solicitation SPE4A5-27-T-2259 is a federal procurement for 18 units of a Vane Assembly, Compressor, Aircraft Gas TU (specifically a Vane Assembly, Stator) under NSN 2840008956103. The requirement is managed by the DLA Weapons Support ASC Supplier OEM Division with a required delivery date of October 18, 2027, and a lead time of 339 days after the date ordered. Delivery is set as FOB Origin, with the final destination for inspection and acceptance located at DLA Distribution Corpus Christi, Texas. The contract mandates strict adherence to quality and technical standards, including CMMC Level 2 Self-Assessment, MIL-STD-129 for marking, and MIL-STD-2073-1E for packaging. Quality assurance is governed by MIL-STD-1916 and MIL-STD-105/ASQ Z1.4, requiring zero non-conformances for acceptance. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with the Buy American Act and Berry Amendment. The solicitation is open to various small business categories under NAICS code 333611, and quotes must be submitted through the DIBBS portal.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

SLEEVE AND SLIDE ASSEM

Solicitation # SPE4A5-27-T-0523

Solicitation SPE4A5-27-T-0523, issued by the DLA Weapons Support ASC Supplier Oper OEM Division, is for the procurement of 24,000 matched sets of Sleeve and Slide Assemblies. The items are identified as commercial and critical application items, specifically Honeywell International Inc part number 3882401-3 (NSN 2835-01-113-6892). Delivery is required within 193 days after order, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination, DLA Distribution Cherry Point in North Carolina. The contract mandates strict quality and security compliance, including a CMMC Level 2 Self-Assessment and adherence to ISO 9001:2015 standards. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with zero non-conformances required for acceptance under MIL-STD-105/ASQ Z1.4. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Additionally, the offeror must comply with the Buy American Act and the Berry Amendment, and all payment requests must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

SEAL, METALLIC, NONAIRCR

Solicitation # SPE4A5-27-T-1974

Solicitation SPE4A5-27-T-1974 is a request for quotations issued by the DLA Weapons Support ASC Supplier Oper OEM Division for the procurement of 74 metallic seals for non-aircraft gas turbine engines, specifically identified as air-oil compressor seals (NSN 2835-01-455-8620). This is a total small business set-aside under NAICS code 333611. The items are designated as critical application commercial items and must be delivered FOB Origin to DLA Distribution Depot Hill in Utah. The need ship date is April 6, 2027, with an original required delivery date of November 17, 2027, and a delivery window of 152 days. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 self-assessment, physical identification marking, and specific documentation for source approval. Packaging must comply with ASTM D3951 and RP001, with labeling following MIL-STD-129. Inspection and acceptance will occur at the destination, requiring zero non-conformances based on MIL-STD-105/ASQ Z1.4 sampling plans. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with the Buy American Act and Berry Amendment. Quotations must be submitted through the DIBBS portal by November 4, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 12 hours ago

DEADLINE

Solicitation # 2140519

The New York Power Authority is soliciting proposals under solicitation number 2140519 to provide a turbine pump for the Niagara Power Project located in Niagara Falls, New York. This procurement is managed by the Power Authority of New York, with Thomas Kalb, the Acting Site Manager SSM, serving as the primary point of contact for both inquiries and submissions. Interested bidders must utilize the New York Power Authority website and the Ariba platform to access official bid documents and instructions, as the specific technical requirements and performance outputs are detailed within the Ariba event. The deadline for proposal submission is November 27, 2026, at 4:00 PM. All participation and bidding processes must be conducted through the authorized Ariba portal to ensure validity.

Power Authority of New York

POSTED

DEADLINE

Portable Trailer-Mounted Standby Generator SupplierThis subcontract, managed by the Jefferson Parish Purchasing Department in Louisiana, involves the manufacture and delivery of one portable, trailer-mounted standby generator system. The unit must feature weather-protective housing and a towing assembly, specifically designed to provide standby power for prime contractors working on sewer lift station projects. To ensure eligibility for hazard mitigation funding, the equipment must strictly comply with FEMA and GOHSEP requirements. The solicitation was posted on November 4, 2026, with a response deadline set for January 12, 2027.

Jefferson Parish Purchasing Department

POSTED

DEADLINE

Manufacture of Matched Bevel Gear SetsThis subcontract, issued by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, involves the manufacture of matched bevel gear sets for prime contractors. The scope of work requires precision machining, grinding, and finishing to meet strict engineering tolerances, ensuring synchronized performance through the matching of gear sets. The contractor is responsible for executing Production Lot Test Approval in accordance with procurement note E03. Technical execution involves the use of gear hobbing, CNC grinding, and precision measurement tools to deliver finished products. The opportunity was posted on November 3, 2026, with a response deadline of November 16, 2026, falling under NAICS code 333611.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

STEM AND SLEEVE ASS

Solicitation # SPE4A5-26-T-458P

Solicitation SPE4A5-26-T-458P is a request for quotations issued by the DLA Aviation ASC Supplier Oper OEM Division for the procurement of one Stem and Sleeve Assembly, identified by NSN 6685009074922. The contract specifies a need ship date of March 17, 2027, and an original required delivery date of June 7, 2027, with delivery terms set as FOB Origin. The item is to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based sampling plan. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific prohibitions are in place regarding the use of mercury or mercury compounds in preservation and packaging. Technical requirements include compliance with configuration change management and the removal of government identification from non-accepted supplies. The solicitation incorporates various FAR and DFARS clauses covering cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

NSN 2835014677434; NOZZLE ASSEMBLY,TURBINE,NONAIRCRAFT GA; WSDC 05F; APPL F-16

Solicitation # SPE4A527Q0053

DLA Aviation is seeking a firm fixed price contract for 109 turbine nozzle assemblies for nonaircraft general aviation, specifically for the F-16, under solicitation number SPE4A527Q0053. The procurement is designated as FOB Origin and I/A Destination, with RTX Corporation listed as the approved source. The solicitation is expected to be published around November 26, 2026, with a closing date of December 28, 2026. Award decisions will be based on a combination of price, past performance, and other evaluation factors. All solicitation documents are available electronically via the DLA Internet Bid Board System.

POSTED

DEADLINE

Gear Meter Driver Component SupplierThis subcontract involves the supply of 28 Gear Meter Driver units for prime contractors supporting Department of Defense supply contracts. The selected supplier is responsible for manufacturing or sourcing components identified by NSN 1680006911196, ensuring all parts strictly adhere to the provided technical data package through the use of precision machining and assembly equipment. Managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract requires the provider to maintain a valid CAGE code and UEI. Performance will take place at Hill AFB, and the procurement falls under NAICS code 333611.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

AIR INTAKE, TURBINE ENG

Solicitation # SPE4A6-27-T-7977

Solicitation SPE4A6-27-T-7977, issued by the DLA Weapons Support ASC Commodities Division, is a request for quotations for seven turbine engine air intakes, identified by NSN 2835-01-738-1616 and part number NMM400180 from Bird-Johnson Propeller Company, LLC. The procurement falls under NAICS 333611, with a required delivery date of September 2, 2026, and a delivery timeline of 20 days after order. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination, specifically Assault Craft Unit 4 in Virginia Beach, Virginia. The contract mandates strict adherence to technical and quality standards, including sampling per MIL-STD-1916 or ASQ H1331 and packaging and marking according to MIL-STD-2073-1E and MIL-STD-129. A critical prohibition is placed on the intentional use of mercury or mercury-containing compounds in the hardware, preservation, or packaging. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment, as well as compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the safeguarding of covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS