This Solicitation opportunity from Texas was posted on April 11, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

100kw Generator

Closed

ITB - #GENERATOR-2024State & Local

Submission Closed05/03/2024, 05:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 335312

New

International

Генератори спеціального призначення

Solicitation # UA-2026-11-06-015162-a

This solicitation, issued by Military Unit A0216 of the Government of Ukraine, concerns the procurement of 11 special purpose inverter generators. The requirement consists of five gasoline generators with a rated power of 5-6 kW, four gasoline generators with a rated power of 3-4 kW, and two diesel generators with a rated power of 4.5-5 kW. All equipment must adhere to the technical specifications and completeness standards defined in the electronic catalog and the draft contract. The procurement process is identified by solicitation number UA-2026-11-06-015162-a and was posted on November 6, 2026. Interested parties must submit their responses by the deadline of November 11, 2026, at 09:00. The primary point of contact for this acquisition is Serhiy Pylypenko, and the performance of the contract will take place within Ukraine.

Військова частина А0216

POSTED

DEADLINE

WY FC Butterfly Valves DC MotorsThe Bureau of Reclamation, under the Department of the Interior, has issued a forecast for the procurement of butterfly valves for DC motors within the Missouri Basin. This requirement is categorized under NAICS code 335312 and is intended to support operational infrastructure. The forecast was posted on November 6, 2026, and is managed by Jennalyn Kent, who serves as both the primary point of contact and the Small Business Specialist. Further details regarding the acquisition can be accessed through the Acquisition Gateway.

Bureau of Reclamation

POSTED

DEADLINE

EC - GM 75KW Diesel GeneratorThe Bureau of Reclamation, under the Department of the Interior, is forecasting a contract for the procurement of a 75KW diesel generator. This equipment is intended to provide critical emergency backup power for the hoist house, head gates, and spillway within the Missouri Basin. The project is categorized under NAICS code 335312. Interested parties may coordinate with David Bryan or Small Business Specialist Jennalyn Kent for further information regarding this requirement.

Bureau of Reclamation

POSTED

DEADLINE

Supply of Alternating Current Motors (NSN 6105014846451)This subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the supply of three Alternating Current Motors designated as Critical Application Items under NSN 6105014846451. The contract is set aside for Service-Disabled Veteran-Owned Small Businesses and falls under NAICS code 335312. Performance will take place in San Diego, California. The contractor must ensure all motors meet strict specifications, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129 standards respectively. Notably, the use of additive manufacturing is prohibited unless an ESA evaluation is conducted. The response deadline for this solicitation is November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Motor Controller Component SupplierThis subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the manufacture or sourcing of 28 motor controller units, specifically NSN 6110-01-315-7892. The selected supplier must ensure all components are packaged and marked in strict accordance with RP001, MIL-STD-2073-1E, and MIL-STD-129 standards. Additionally, the contractor is obligated to maintain compliance with the Buy American/Balance of Payments Program and adhere to all cybersecurity reporting requirements for covered defense information. The opportunity is designated as a Service-Disabled Veteran-Owned Small Business set-aside under NAICS code 335312. Performance for this contract will take place in New Cumberland, Pennsylvania. Interested parties must have submitted their responses by the deadline of November 16, 2026, to provide these critical components to prime contractors delivering on DLA supply contracts.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Manufacturing and Supply of Electrical Rotating Equipment End BellsThis subcontract involves the manufacturing and supply of five specialized End Bell components for electrical rotating equipment to support DLA supply contracts. The work must be performed in accordance with the DLA Master List of Technical and Quality Requirements, with all quality inspections conducted under an ISO 9001:2015 certified system. Final products must be packaged and labeled according to ASTM D3951 and MIL-STD-129 standards. The contract is issued by the Department of Defense through the DLA Weapons Support ASC Supplier OEM Division, with performance located in San Diego. Compliance requirements include a CMMC Level 2 self-assessment and adherence to Buy American regulations. The response deadline for this opportunity is November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supplier of Motor/Brake Assembly (PN: 0100C-1BEB-0040)This HUBZone set-aside subcontract involves the manufacture or procurement of two specialized Motor/Brake Assemblies, part number 0100C-1BEB-0040, for the DLA Fleet Readiness Center Southwest. The supplier must adhere to CAGE code 4QUB3 and ensure all items meet strict quality sampling standards per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129 guidelines, with final delivery of the completed assemblies required FOB Destination to San Diego, California. The opportunity is categorized under NAICS code 335312 and is managed by the Department of Defense.

DLA FLEET READINESS CT SOUTHWEST DLA

POSTED

DEADLINE

Alternating Current Generator Supplier (NSN 6115-01-707-8923)This subcontract opportunity is a total small business set-aside for the manufacture or procurement of 15 Alternating Current Generators under NSN 6115-01-707-8923. Supporting the DLA Weapons Support Maritime Supply Chain, the selected supplier must ensure all units adhere to MIL-STD-2073-1E and MIL-STD-129 packaging and marking standards. The final products are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility. Strict regulatory and security requirements are in place, necessitating CMMC Level 2 certification via a C3PAO and full compliance with ITAR and EAR export controls. Interested parties must submit their responses by November 16, 2026, under NAICS code 335312.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Supply of Alternating Current Motors (NSN 6105-01-476-1605)This subcontract, issued by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the manufacture or procurement of two alternating current motors identified by NSN 6105-01-476-1605 and Part Number 603511-108. The motors must be produced in accordance with MIL-M-17060 REV E and strictly adhere to NAVSEA 5100-003D mercury-free requirements. All deliverables must be packaged and marked according to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 335312. Completed units are to be delivered FOB Origin to DLA Distribution DDSP in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Precision Electric Motor and Gearhead SupplyThis subcontract, titled Precision Electric Motor and Gearhead Supply, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support Land Supplier Operations Vehicle Support agency. The contractor is responsible for providing high-precision electric motors and associated gearing systems for prime contractors, specifically meeting the torque, voltage, and rotary speed requirements for NSN 3010-01-316-0190. All gearing must be constructed from specialty alloys or hardened steel, and all delivered motors and gear assemblies must be certified. Compliance requirements include ensuring all materials are free of Class I ozone-depleting chemicals and providing all necessary Safety Data Sheets. The place of performance is located in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, under NAICS code 335312.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Distribution Box Fabrication and AssemblyThis subcontract involves the manufacture and supply of Distribution Boxes for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The scope of work includes the fabrication of enclosures and internal assemblies in strict accordance with NSN 6110-01-645-8391 and the DLA Master List of Technical and Quality Requirements. The final deliverables must be completed, labeled, and delivered, with packaging and marking adhering to ASTM D3951, RP001, and MIL-STD-129 standards. The project is categorized under NAICS code 335311 and requires the contractor to maintain NIST SP 800-171 compliance for data security. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 16, 2026, to meet the requirements set forth by the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Motor Controller Supplier (NSN 6110-01-545-9535)This subcontract, managed by the DLA Weapons Support Maritime Supply Chain under the Department of Defense, requires the procurement of a specialized Motor Controller meeting NSN 6110-01-545-9535 specifications. The equipment is designated for prime contractors working on US Navy projects, specifically for the USS AMERICA LHA 6. The supplier is responsible for ensuring that the item is packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. The contract mandates the delivery of one packaged and marked Motor Controller to the specified vessel by November 2026. Performance will take place at FPO 96660, falling under NAICS code 335312. Interested parties must adhere to the response deadline of November 16, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

2 days ago

DEADLINE

in 8 days

AI Contract Overview

The contract involves the purchase and installation of a 100 kW generator for the SFASU Poultry Research Center at Stephen F. Austin State University in Texas. The scope includes the removal and disposal of the existing generator, ensuring a seamless upgrade to the new unit. The solicitation, identified as GENERATOR-2024, was posted on April 11, 2024, with a response deadline of May 3, 2024. Vendors are responsible for monitoring electronic postings for any updates or addenda related to the solicitation, as the agency will not be liable for missed information. The contract is managed under NAICS code 335312, which pertains to power, distribution, and specialty transformer manufacturing. Interested vendors can contact Lacey Bradshaw via email or phone for further details, and additional information is accessible through the provided online link.

General Info

Agency

Texas → Stephen F. Austin University

NAICS

335312 - Motor and Generator Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Documents

itb

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedApr 11

Solicitation

Response DeadlineMay 3

Deadline has passed

Submission Closed

05/03/2024, 05:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Stephen F. Austin University

Contacts1 person available

OfficeN/A

Organization / AgencyTexas → Stephen F. Austin University

Office AddressN/A

Contacts

Lacey Bradshaw

contact@example.gov

+1 (555) 000-0000

Full Description

Purchase of 100 kw Generator. Install included with removal and disposal of old unit for the SFASU Poultry Research Center at Stephen F. Austin State University. ---Download the solicitation document for full information. ---ADDENDAS: It is the vendor's responsibility to check the electronic postings for any additional information or addenda in regard to this solicitation. This agency will not be responsible for any additional information not being received by a vendor in regard to this solicitation.

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS