Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

1065 parSYNC Upgrade and Calibration Services

Active

State & Local

Response Deadline11/17/2026, 01:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The 1065 parSYNC Upgrade and Calibration Services subcontract involves providing specialized hardware and software upgrades for prime contractors working on California Air Resources Board emissions projects. The scope of work includes performing maintenance checks on two 3DATX parSYNC systems, installing GPS weather stations, and replacing sensor cartridges and 1065 sample line assemblies. The ultimate goal is the delivery of two upgraded and certified measurement systems. To ensure full 1065-compliance, the contractor is responsible for providing all necessary calibration certifications and regulatory documentation. This project falls under NAICS code 811210 and is associated with the State Air Resources Board in California. The solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026.

General Info

Subcontract for upgrading and calibrating two parSYNC measurement systems for California emissions projects.

Agency

California → State Air Resources Board

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of 2026061.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFQ #2026061 - SB Option- 3DATX Mini PEMS and 1065 Upgrades

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 2

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 01:00:00 AM UTCin 14 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → State Air Resources Board

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → State Air Resources Board

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs hardware and software upgrades for prime contractors on California Air Resources Board (CARB) emissions projects. Conducts maintenance checks on two 3DATX parSYNC systems, installs GPS weather stations, and replaces sensor cartridges and 1065 sample line assemblies. Provides calibration certification and regulatory documentation to ensure 1065-compliance. Delivers two upgraded and certified measurement systems.

Similar Contracts

Same NAICS industry code

IFB 56A9015 Maintenance and Repair of the Transportation Management Systems (TMS) Elements and Communications Infrastructure in San Benito, Santa Cruz, Monterey, San Luis Obispo, and Santa Barbara Counties.

Solicitation # 56A0915

The California Department of Transportation (Caltrans) is soliciting bids under IFB 56A0915 for the routine and non-routine maintenance, troubleshooting, and repair of Transportation Management Systems (TMS) elements and communications infrastructure. The scope of work covers San Benito, Santa Cruz, Monterey, San Luis Obispo, and Santa Barbara counties, focusing on field elements such as CCTV, changeable message signs, highway advisory radios, and roadway weather information stations, as well as fiber optic and copper infrastructure. The estimated period of performance runs from December 21, 2026, through December 20, 2029. The contract requires the provider to supply all labor, vehicles, specialized equipment, and traffic control, with specific technical requirements for fiber optic cable packaging, labeling, and OTDR testing. The agreement will be awarded to the lowest responsive and responsible bidder. Evaluation includes a five percent preference for certified Small, Micro, or Disabled Veteran Business Enterprises, with a total incentive cap of 100,000 dollars. Bidders must submit hard-copy proposals by November 17, 2026, including a Bidder's Bond for bids of 484,000 dollars or more. The contract is subject to State General Prevailing Wage Rates and requires a payment bond for service requests of 25,000 dollars or more. Invoicing is handled monthly via the Caltrans submittal box, requiring supporting work summaries and labor compliance documentation. Final acceptance of work is determined by Caltrans following inspection and verification of technical specifications.

California Department of Transportation

POSTED

about 5 hours ago

DEADLINE

Maintenance, Warranty & Training Services

Martin Luther King, Jr. Charter School of Excellence

POSTED

about 8 hours ago

DEADLINE

in about 1 month

QUANTUM MAINTENANCE RENEWAL - BPRD

Solicitation # SRC0000037506

Solicitation SRC0000037506 is a request for the Quantum Maintenance Renewal for the Educational Television Commission in Alabama. This SLED procurement, categorized under NAICS code 811210, is managed by the State of Alabama and is governed by the Department of Finance Administrative Code. The contract allows for annual renewals for a total period of up to five years, with a maximum total contract value of 25,000 dollars. Price escalations are permitted but are capped at 5 percent and require written approval from both the State and the supplier. The award process focuses on pricing, with the State reserving the right to analyze cost realism and price reasonableness. Successful bidders may be required to provide proof of professional licenses, certificates of insurance, and manufacturer reseller authorizations. All submissions must be completed electronically through the Alabama Buys portal. Payment is handled via electronic methods, including P-cards and EFT, and the State maintains the right to inspect all products under the Universal Commerce Code of Alabama before final acceptance. Suppliers must certify their tax registration status and affirm that they are not currently debarred or suspended from government contracting.

EDUCATIONAL TELEVISION COMM

POSTED

about 10 hours ago

DEADLINE

Vending Machine Maintenance and Restocking ServicesThis subcontract for Vending Machine Maintenance and Restocking Services involves providing ongoing technical support and inventory management for vending machines located at City of Boston BCYF community center projects. The selected provider will be responsible for conducting routine inspections, performing mechanical repairs using diagnostic equipment, and ensuring all machines remain fully stocked and operational. The contractor will work as a subcontractor for prime contractors, requiring close coordination with the BCYF Operations team and various City stakeholders. This engagement falls under NAICS code 811210 and is managed through the City of Boston in Massachusetts, with a response deadline set for November 17, 2026.

POSTED

about 10 hours ago

DEADLINE

Control Panel Housing and Chassis FabricationThis subcontract involves the fabrication of 119 precision metal enclosures and chassis for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The scope of work requires the production of housings based on Drawing NR 81755 and piece numbers 16Z001 and 16PR070, utilizing precision cutting and bending techniques to ensure all components meet strict military tolerances. To qualify for this project, the supplier must maintain ISO 9001:2015 certification and ensure full compliance with ITAR and EAR regulations. The performance of the contract is centered in the 95304-5000 zip code area, with a response deadline set for December 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

Patient Hoists, Pool Hoists and Assisted Bathing Equipment - Servicing and Testing

Solicitation # C487659

The Sheffield Teaching Hospitals NHS Foundation Trust is seeking a professional external supplier for the safe maintenance and servicing of patient hoists, pool hoists, and assisted bathing equipment at the Royal Hallamshire Hospital in Sheffield. This regional procurement is reserved for suppliers from South Yorkshire and is noted as being particularly suitable for small and medium-sized enterprises. The estimated total value of the contract is 110,400 pounds including VAT. The primary period of performance is estimated to run from March 2, 2027, to March 1, 2030, with a potential 1+1 extension option that could extend the contract until March 1, 2032. Award decisions will be based on the highest overall score, with evaluation weightings split between technical capabilities at 60 percent, commercial factors at 30 percent, and social value at 10 percent. Interested parties must demonstrate relevant experience, financial standing, and technical ability. Tenders must be submitted electronically via the Atamis E-Tendering Portal by the deadline of November 30, 2026, at 12:00 pm. The primary point of contact for this solicitation, numbered C487659, is Ella Gaubert.

Sheffield Teaching Hospitals NHS Foundation Trust

POSTED

about 10 hours ago

DEADLINE

Generator Monitoring Hardware Maintenance and ReplacementThis small business set-aside subcontract, managed by the Department of Defense for W6QM Micc-Ft Jackson, involves the supply, installation, and maintenance of cellular monitoring hardware for emergency generators at Fort Jackson in Columbia. The contractor is responsible for ensuring that OmniMetrix devices on 15 existing generators remain functional for cloud portal data transmission, while also providing the capacity to install up to five additional units annually. The primary objective is to deliver fully operational hardware that allows prime contractors to monitor generator status remotely. This effort falls under NAICS code 811210 and requires the contractor to perform all necessary incidental maintenance and replacements to guarantee consistent data transmission and hardware reliability.

W6QM Micc-Ft Jackson

POSTED

about 15 hours ago

DEADLINE

N.I.S.T. Traceable Calibration ServicesThis small business set-aside subcontract, issued by the Department of Defense W6QK Ccad Contr Office, requires precision calibration and certification services for Digital Torque Multipliers used by prime contractors. The selected provider must verify system stability, 100% repeatability, and an accuracy output of +/- 1% across specified temperature ranges. All work must be performed using testing rigs and standards that maintain strict traceability to the National Institute of Standards and Technology. The scope of work culminates in the delivery of formal N.I.S.T. traceable calibration certificates. Performance for this contract will take place in Corpus Christi, Texas, under NAICS code 811210. Interested parties should note the brief response window following the November 2, 2026, posting date.

W6QK Ccad Contr Office

POSTED

about 15 hours ago

DEADLINE

Repair and Overhaul of SIG Processor GroupsThis subcontract involves the repair and restoration of SIG Processor Groups, specifically NSN 5821-01-657-6453CX and 5821-01-657-6452CX, for prime contractors supporting US Air Force B-52 CONECT projects. The selected provider will utilize avionics test benches to test and certify the units to A condition, ensuring all deliverables meet strict serviceability standards. All packaging and shipping must adhere to MIL-STD-2073-1 and MIL-STD-129 requirements. The project is managed under the Department of Defense through agency FA8539 Afsc Pzaba and falls under NAICS code 811210. To qualify, contractors must maintain ISO 9001:2015 certification and demonstrate compliance with CMMC and NIST SP 800-171 security standards. The response deadline for this opportunity is February 1, 2027.

FA8539 Afsc Pzaba

POSTED

about 15 hours ago

DEADLINE

Ametek Fire Bottle Repair and ServicingThis subcontract through Navsup Weapon Systems Support involves providing specialized repair and overhaul services for Ametek 5-year repair LTC fire bottles, specifically NIIN 014444825, supporting U.S. Navy fire suppression projects. The contractor is responsible for executing required repair cycles, supplying all necessary replacement parts, and delivering certified fire bottles while strictly adhering to mandated Repair Turn Around Time requirements. Technical compliance is critical, as the work requires the use of Ametek-specific tooling and adherence to MIL-STD-129 and Unique Identification requirements. The opportunity is categorized under NAICS code 811210, with a response deadline set for December 2, 2026.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

Butterfly Valve Teardown, Repair, and TestingThis subcontract involves the teardown, evaluation, repair, and modification of butterfly valves for prime contractors supporting Navsup Weapon Systems Support projects. The scope of work includes disassembling, cleaning, and inspecting valves, replacing any components that exceed repair manual limits, and conducting functional testing to achieve Ready for Issue status. The final deliverables consist of 10 repaired valves accompanied by their respective Historical Record Files. To ensure quality and precision, the contractor must utilize calibration systems that comply with ANSI/NCSL Z540.3 or ISO-10012-1 standards. Additionally, the provider is required to hold ISO 9001 or SAE AS9100 certification. This project falls under NAICS code 811210 and is managed under the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 15 hours ago

DEADLINE

Electro-Mechanical Actuator Repair and Modification ServicesThis subcontract for Electro-Mechanical Actuator Repair and Modification Services supports Navsup Weapon Systems Support Mech projects for the Department of Defense. The scope of work involves the complete teardown, evaluation, repair, and modification of electro-mechanical actuators to return them to full operational status. Contractors are responsible for disassembling units to identify wear and performing rigorous testing in accordance with original manufacturer specifications and drawings, utilizing specialized tooling and test equipment. Compliance is mandatory with MIL-STD-130 Rev N and requirements for Cage Codes 7AMS8, 63600, and 3B558. The primary objective is the delivery of fully repaired and tested actuators under NAICS code 811210. The solicitation was posted on November 2, 2026, with a response deadline of November 16, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

More opportunities from California → State Air Resources Board

Same awarding agency

Supply of GasMOD and PM/PN Sensor CartridgesThis subcontract involves the supply of specialized GasMOD and PM/PN sensor cartridges to prime contractors working on California Air Resources Board PEMS contracts. The scope of work requires the manufacture or distribution of high-precision optical or electrochemical sensors for various gases, including NO, NO2, CO2, CO, HC, and O2, as well as coarse, medium, and fine particulate matter. All provided components must be compatible with 3DATX parSYNC systems and adhere to strict CARB regulatory accuracy standards. The contract is managed under NAICS code 334517 and requires the delivery of individual sensor cartridges according to specific CLIN specifications. Interested parties should note the response deadline of November 17, 2026, for this state-level procurement opportunity associated with the California Air Resources Board.

Irradiation Apparatus Manufacturing

POSTED

about 6 hours ago

DEADLINE

Supply of 1065-compliant 3DATX parSYNC Measurement SystemThis subcontract involves the supply of one complete parSYNC FLEX 1065 measurement system intended for prime contractors working on California Air Resources Board vehicle surveillance projects. The delivery includes a GasMOD, PM/PN sensor cartridges, a CUBE FLEX conditioning unit, and a pre-loaded Windows laptop. To ensure regulatory adherence, the system must be 1065-compliant in accordance with 13 CCR 2400-2439 as well as 40 CFR 1039, 1048, and 1054. The agreement specifies the delivery of one fully operational system on a FOB Destination basis. Managed under NAICS code 423430 for the State Air Resources Board in California, the solicitation was posted on November 2, 2026, with a response deadline of November 17, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 6 hours ago

DEADLINE

RFQ #2026061 - SB Option- 3DATX Mini PEMS and 1065 Upgrades

Solicitation # 2026061

Solicitation RFQ 2026061 is issued by the California Air Resources Board to procure one new 1065-compliant 3DATX parSYNC measurement system and two upgrade packages for existing systems. These devices are utilized as low-cost alternatives for managing high hydrocarbon emissions during vehicle surveillance, in-use compliance, and emissions testing, adhering to specific California and federal regulations. The procurement is designated as a Small Business Option, meaning bids are exclusively accepted from DGS registered small or micro businesses. Bids must be submitted by November 17, 2026, and any proposal valued at 250,000 dollars or more will be rejected as non-responsive. The contract will be awarded to the lowest responsive and responsible bidder on an all-or-nothing basis. Selected vendors must deliver the equipment to Riverside, California, within 45 working days of the purchase order execution under FOB Destination terms. All hardware includes a one-year limited warranty, and the state will verify operational compliance within 30 business days of delivery. Payment is governed by the California Prompt Payment Act, with undisputed invoices paid within 45 days. Bidders must provide comprehensive documentation, including small business certifications, DVBE declarations, and a disclosure regarding the use of generative AI to avoid disqualification.

Analytical Laboratory Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

Small Business Option Request for Quote (RFQ) No. 26ASD010 Office and Residential Moving and Installation Services

Solicitation # 26ASD010

The California Air Resources Board (CARB) is soliciting price quotes from California Certified Small Businesses for office and residential moving and installation services throughout Northern California. This as-needed contract, with an estimated maximum value of 149,999.99 dollars and a projected start date of January 1, 2027, covers the transportation, delivery, pickup, relocation, assembly, disassembly, installation, and storage of furniture and equipment at CARB facilities and employee residences. Services are generally performed Monday through Friday from 7:00 AM to 6:00 PM PST, with occasional weekend or holiday requirements. To be eligible, bidders must be DGS Certified Small Businesses located within a 50-mile radius of the California Environmental Protection Agency Headquarters in Sacramento. Minimum qualifications include holding a valid C-61 Limited Specialty Classification and D-34 Prefabricated Equipment Contractor license, as well as providing three favorable references demonstrating at least five years of experience installing Haworth, CALCTRA, and All Steel Modular System Furniture. The contract will be awarded to the lowest responsive bid based on the Grand Total Cost. Submissions must be delivered via email to Cayla Gray-Borghese by November 9, 2026, at 1:00 PM PST. Mandatory documentation includes a contractor rate sheet, various state certifications, and an acknowledgement of prevailing wage requirements per the State Department of Industrial Relations. Awarded contractors must comply with the Americans with Disabilities Act, provide necessary personal protective equipment at no cost to the state, and submit invoices monthly in arrears to the CARB Accounting Section.

Used Household and Office Goods Moving

POSTED

DEADLINE

Furniture and Equipment Storage ServicesThis subcontract for Furniture and Equipment Storage Services provides secure warehouse space for prime contractors working on California Air Resources Board projects. The scope of work includes both temporary and long-term storage solutions utilizing industrial racking systems and vault storage to manage inventory and ensure the secure storage and retrieval of assets. To qualify for this engagement, providers must maintain necessary warehouse insurance and hold specific security certifications. Interested parties should note that the response deadline for this opportunity is November 9, 2026, and the services fall under NAICS code 532289.

All Other Consumer Goods Rental

POSTED

DEADLINE

Moving and Packing Supplies SupplierThis subcontract opportunity is for a Moving and Packing Supplies Supplier to support prime contractors working on projects for the California Air Resources Board. The selected provider will be responsible for supplying a variety of packing and transporting materials, including secure and non-secure packing boxes, plastic totes, and industrial library carts for internal transport. Additionally, the supplier must deliver heavy-duty cardboard and locking storage containers directly to the prime contractor or designated CARB sites. The solicitation is categorized under NAICS code 423440 and was posted on October 22, 2026. Interested parties must submit their responses by the deadline of November 9, 2026. Further details regarding this procurement can be accessed through the Cal eProcure portal.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

Modular Systems Furniture (MSF) Installation and AssemblyThis subcontract opportunity with the California Air Resources Board involves the assembly, disassembly, and installation of specialized modular office furniture systems. The selected contractor will work under prime contractors to remove existing systems and install new Haworth, CALCTRA, and All Steel MSF according to specific facility layouts to ensure the delivery of fully functional workspaces. Eligible bidders must possess a C-61 Limited Specialty Classification and a D-34 Prefabricated Equipment Contractor license, along with at least five years of relevant experience. The solicitation was posted on October 22, 2026, with a response deadline of November 9, 2026. This project falls under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Office and Residential Moving and TransportationThis subcontract for Office and Residential Moving and Transportation supports prime contractors on California Air Resources Board projects. The scope of work involves the transportation, delivery, pick-up, and relocation of office furniture and equipment, including loading, unloading, and safe placement at designated destinations. Services include navigating residential locations and stairs, with transport capabilities extending up to 250 miles from Sacramento. The contractor is responsible for providing all necessary resources, including moving trucks, dollies, and crews consisting of one to two personnel. This opportunity falls under NAICS code 484110 and was posted on October 22, 2026, with a response deadline of November 9, 2026.

General Freight Trucking, Local

POSTED

DEADLINE

RFQ #2026066 -SB Option- 22 IDEX V4 3D Printer

Solicitation # 2026066

The California Air Resources Board is soliciting quotes for the procurement of a 22 IDEX V4 3D Printer and associated equipment to facilitate the in-house fabrication of customized components, fixtures, and attachments for off-road vehicle testing. The required hardware includes the 3D printer, a 3D PrintPro 3 fume extractor, and a comprehensive production pack featuring a vacuum chamber and industrial vacuum oven for drying high-performance thermoplastics. The system must support a wide range of materials, from commodity plastics like ABS and PLA to engineering-grade thermoplastics such as PEKK and ULTEM, and must be delivered to Riverside, California, within 45 working days of order execution. This solicitation is set aside for certified Small Businesses, including Micro Businesses, under Government Code Section 14838.5. Bids must be valued between $5,000.00 and $249,999.99, as any proposal at or above $250,000.00 will be rejected as non-responsive. Interested vendors must submit their electronic response packets via email by November 4, 2026, at 5:00 PM PT. Required documentation includes a specification compliance questionnaire, bidder declarations, and certifications for small business or disabled veteran business enterprise status. Bidders are also mandated to disclose the use of generative AI in their proposals to avoid potential disqualification.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

3D Printer Specialized Parts KitThis subcontract opportunity, issued by the State Air Resources Board for the State of California, involves the provision of specialized high-wear component kits for prime contractors working on Department of General Services projects. The required kit must include hotend heat breaks, carbon fiber build plates, 4mm hardened steel nozzles, hotend cooling fans, temperature sensors, and nano polymer adhesive, all of which must strictly adhere to 22 IDEX V4 system technical specifications. The solicitation was posted on October 19, 2026, with a response deadline of November 5, 2026. Classified under NAICS code 423830, the contract focuses on the delivery of a complete, integrated component kit to ensure the operational efficiency of specific 3D printing hardware used within state projects.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

22 IDEX V4 3D Printer SupplyThis subcontract agreement involves the supply of one 22 IDEX V4 or a comparable high-specification Independent Dual Extruder 3D printer for prime contractors working on State of California Department of General Services projects. The State Air Resources Board is the overseeing agency, and the contract requires the delivery of a fully functional unit that meets all technical specifications as verified through a Specification Compliance Questionnaire. To be eligible, providers must maintain valid licenses in good standing and possess a valid Seller Permit. The solicitation was posted on October 19, 2026, with a response deadline of November 5, 2026. This procurement falls under NAICS code 423430 and is managed through the Cal eProcure system.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS