This Sources Sought opportunity from Department Of Defense was posted on July 10, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

114 MXG Small Air Mobile Shelter

Closed

W50S9626QS019Federal

Submission Closed07/17/2026, 01:00:00 PM CDT

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332311

New

SLED

Provide and Install 85' x 60' Fabric Structure

Solicitation # 270006555

The City of Richmond, Virginia, is soliciting quotes for the provision and installation of a clear span fabric structure located at 802 Forest Lawn Dr. The required structure must be 85 feet wide by 60 feet high, featuring five steel trusses and flame retardant fabric. The building is to be installed on existing 6-foot tall blocks and must remain open on both end walls, with a 50-foot clear area maintained around the perimeter. Delivery of materials is required by December 31, 2026, and final installation must be completed no later than April 1, 2027. The contract will be awarded to the lowest acceptable quote. Bidders must be registered through the City's Supplier Registration Portal and provide a Virginia State Corporation Commission identification number. Mandatory submission documents include a signed Request for Quotes certification, a consent form for electronic signatures, and a debarment certification. The successful contractor must maintain comprehensive insurance coverage, including General Liability, Auto Liability, and Umbrella/Excess Liability, naming the City of Richmond as an additional insured. All payments are subject to annual appropriations by the City Council and will be processed via ACH upon submission of invoices to the Department of Finance.

POSTED

DEADLINE

Supply of 304 Stainless Steel Cold-Finish Annealed SheetsThis subcontract involves the supply of 23 cold-finish, annealed 304 grade stainless steel sheets for prime contractors supporting DLA Troop Support projects. Each sheet must measure 0.125 inches in thickness, 36.00 inches in width, and 10.00 feet in length. To ensure compliance with STEEL COMP 304 material standards, the provider must utilize specialized cold-rolling and annealing equipment. The contract is managed by the Department of Defense through the Warner Robins agency, with performance taking place at Robins Air Force Base. Interested parties must be capable of submitting all required documentation via the DIBBS system. The response deadline for this requirement is November 23, 2026.

POSTED

DEADLINE

Precision Tubing and Fin SupplyThis subcontract, titled Precision Tubing and Fin Supply, involves the provision of raw materials and precision-formed tubing and fins for prime contractors supporting DLA Troop Support projects. The scope of work requires the use of precision extrusion and rolling equipment to form components according to Drawing NR 19207 12581407, with a mandatory requirement to provide Mill Test Reports for material certification. All deliverables must comply with the Buy American Act. The opportunity is managed by the Department of Defense through the DDSP New Cumberland Facility and is designated as a Total Small Business Set-Aside under NAICS code 332311. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 12, 2026, with a response deadline of November 23, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Sprocket Wheel Manufacturing and SupplyThis subcontract involves the manufacture and supply of 21 precision-machined steel sprocket wheels for prime contractors supporting the DLA Weapons Support Strategic Acquisition Program Directorate. The components must feature 24 teeth and a 3/8 inch pitch, strictly adhering to NSN 3020012064902 and Curtiss-Wright Flow Control Service P/N 52B9146-9 specifications. Due to the critical nature of the application hardware, the use of precision machining equipment is required. Logistical requirements mandate that all items be packaged according to ASTM D3951 and shipped in compliance with MIL-STD-129. The opportunity is categorized under NAICS code 332311, with a response deadline set for November 27, 2026.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Bulkhead Tee Type Check Valve SupplierThis subcontract is for the supply of 11 Bulkhead Tee Type check valves supporting the DLA Weapons Support Nuclear Reactor Program. The supplier is responsible for manufacturing or sourcing valves that meet NSN 4820-01-124-3687, with delivery terms set as FOB Origin. All units must be palletized according to RP001 and adhere to marking and labeling standards established by MIL-STD-129 and ASTM D3951. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332311. Due to the nature of the project, the contractor must maintain strict compliance with DFARS 252.204-7012 regarding the safeguarding of covered defense information. Responses to this solicitation are due by November 27, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Helical Torsion Spring (Manual Release) Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 66 helical torsion springs designed for manual release applications, supporting prime contractors under the DLA Weapons Support Strategic Acquisition Program Directorate. The contractor is responsible for fabricating the springs to NSN 5360013027738 specifications utilizing precision spring-winding and heat-treatment equipment. To ensure quality and compliance, all units must pass an Engineering Support Activity evaluation and adhere strictly to DLA packaging and labeling requirements as well as DFARS guidelines. The project falls under NAICS code 332311 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Butterfly Valve Manufacturing and SupplyThis subcontract involves the manufacturing and supply of 21 specialized butterfly valves, identified by NSN 4820012048343, for prime contractors working on the DLA Weapons Support Nuclear Reactor Program. These valves must be compatible with gas, oil, and water media and must strictly adhere to the Nuclear Reactor Program specifications as well as the DLA Master Solicitation Technical and Quality Requirements. Managed under the Department of Defense, the project falls under NAICS code 332311. The solicitation was posted on November 12, 2026, with a response deadline set for November 27, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Fixed Legged Container SupplyThis subcontract with Construction and Equipment Containers for the Department of Defense involves the fabrication or procurement of 17 kits of fixed-legged containers, specifically NSN 8145-01-565-5551. These containers are intended for prime contractors fulfilling DLA supply contracts. The contractor must ensure all items are packaged according to ASTM D3951 and the DLA Master List of Technical and Quality Requirements, while maintaining strict compliance with FASCSA/Section 889 regulations regarding covered telecommunications equipment. The project requires the delivery of all 17 completed kits within 90 days of the order. Operating under NAICS code 332311, the performance of this contract is centered in zip code 95304-5000. The solicitation was posted on November 12, 2026, with a response deadline of November 19, 2026.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Gasket Manufacturing and SupplyThis subcontract, managed by the DLA Weapons Support Strategic Acquisition Program Directorate under the Department of Defense, involves the manufacture and supply of 33 specialized gaskets. The gaskets must strictly adhere to Philadelphia Gear Corp specifications for part number 2057G11-001 and must be entirely asbestos-free in compliance with FED-STD-313. Logistics for the order are coordinated through the First Destination Transportation program to ensure delivery meets OEM technical requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332311. Interested parties must respond by November 27, 2026, to provide these essential components for primes delivering on DLA supply contracts.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

FLOOR, PORTABLE SHELTER

Solicitation # SPE8E5-27-T-0557

This solicitation, issued by the DLA Troop Support Construction and Equipment office, is for the procurement of 16 units of portable shelter floors (NSN 5411-01-540-5604). The contract requires adherence to specific technical drawings, including Basic Drawing 19207 12441825 and Reference Drawing 19207 12442051. Delivery is required within 243 days, with a need ship date of July 25, 2027, and a final delivery date of August 8, 2027, to the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the point of origin. The procurement is subject to strict regulatory requirements, including CMMC Level 2 certification and export controls under ITAR and EAR. Packaging must comply with ASTM D3951 and MIL-STD-129, with DLA Master List requirements taking precedence. Notably, the government will not evaluate any offers that utilize additive manufacturing processes. Contractors must comply with the Buy American Act and the Berry Amendment, and all payment processing must be handled electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Aluminum Alloy Sheet Supply (Alloy 7075-T6)This subcontract involves the supply of three high-strength aluminum alloy sheets for prime contractors working on DLA Troop Support Construction and Equipment projects. The required materials are Alloy 7075 Temper T6 sheets, each measuring 0.050 inches in thickness, 48.00 inches in width, and 180.00 inches in length. To ensure compliance, the supplier must provide Material Safety Data Sheets and adhere to MIL-STD-129 standards for shipment and storage marking. The contract is managed by the Department of Defense through Depot Oklahoma, with the place of performance located at Tinker AFB. Interested parties must note the response deadline of November 23, 2026. The procurement falls under NAICS code 332311 and is associated with solicitation details available through the DIBBS system.

POSTED

DEADLINE

Butterfly Valve Manufacturing and SupplyThis subcontract, designated as a Total Small Business Set-Aside under NAICS code 332311, requires the manufacture or procurement of one Butterfly Valve for prime contractors supporting Defense Logistics Agency projects. The selected provider must ensure the item is packaged according to MIL-STD-2073-1E and marked in compliance with MIL-STD-129. Additionally, the contractor is responsible for providing Hazard Communication documentation as mandated by 29 CFR 1910.1200. To be eligible, the contractor must possess a valid CAGE code and Unique Entity Identifier. The final packaged and marked valve must be delivered to the designated performance location in FPO by November 6, 2026. This opportunity is managed through the Department of Defense for the Defense Logistics Agency.

Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 10 days

AI Contract Overview

The U.S. Air Force is seeking information from qualified small businesses to determine market capability for small air mobile shelters under solicitation W50S9626QS019. This sources sought notice is for market research only and does not obligate the government to make an award or reimburse any costs. Interested vendors must demonstrate the ability to supply non-expandable, aluminum shelters measuring at least 91 inches high x 88 inches wide x 108 inches long, designed to fit on a single pallet and weighing no more than 10,000 lbs. Requirements include a single door minimum 33 inches wide by 72 inches high, forkliftable from all sides, four external and twelve internal tie-downs, a 2,500 lb leveling jack, and a high-security Kaba Mas CDX-10 door lock. The shelter must accommodate a 42,000 BTU/hr environmental control unit, 120/208VAC three-phase power input, four interior power outlets, a transient voltage surge suppressor, LED lighting with at least 322 lumens, a decompression breather valve, and an integrated communications panel. A safety kit with fire extinguisher, flashlight, and first aid kit is mandatory. Vendors must include a company profile with SAM UEI and CAGE codes, confirmation of small business size and any socio-economic designations such as 8(a), HUBZone, WOSB, or SDVOSB, a technical demonstration showing compliance with all specifications, and estimated lead times for production or delivery. Submissions must be no more than five pages and sent via email to Steven Audinet and Eric Comes by 1:00 PM CDT on July 17, 2026, with the subject line “Sources Sought Response - Small Air Mobile Shelters.” Questions must be submitted by July 15, 2026.

General Info

U.S. Air Force seeks small businesses to supply non-expandable aluminum air mobile shelters with specific size, weight, and security requirements.

Agency

Department Of Defense → W7N0 Uspfo Activity Sdang 114

NAICS

332311 - Prefabricated Metal Building and Component Manufacturing

Place of Performance

Sioux Falls, SD, USA

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 10

Sources Sought

Response DeadlineJul 17

Deadline has passed

Submission Closed

07/17/2026, 01:00:00 PM CDT

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W7N0 Uspfo Activity Sdang 114

Contacts2 people available

OfficeSIOUX FALLS, SD, 57104-0264, USA

Organization / AgencyDepartment Of Defense → W7N0 Uspfo Activity Sdang 114

Office AddressSIOUX FALLS, SD, 57104-0264, USA

Contacts

Steven Audinet

Eric Comes

Full Description

Notice Type: Sources Sought

Title: Small Air Mobile Shelters

Response Date: 17 July 2026 at 1:00 PM CDT

NAICS Code: 332311 Prefabricated Metal Building and Component Manufacturing

Product Service Code (PSC): 5450 Miscellaneous Prefabricated Structures

This is a Sources Sought notice issued for market research and planning purposes only. This is NOT a Request for Proposal (RFP) or a Request for Quotation (RFQ), and it does not constitute a commitment by the Government. No award will be made as a result of this notice. The Government will not reimburse any costs associated with preparing or submitting a response to this notice.

The purpose of this Sources Sought is to identify qualified and capable Small Businesses (including 8(a), HUBZone, Service-Disabled Veteran-Owned, and Women-Owned Small Businesses) that can provide Small Air Mobile Shelters meeting the specific technical requirements outlined below.

Technical Specifications

The Government requires Small Air Mobile Shelters that meet the following minimum specifications:

Dimensions & Structure

Dimensions: At least 91" Height x 88" Width x 108" Length.

Pallet Size: Single Pallet size (approximately 90"x90"x108").

Design: Non-expandable, no windows.

Material: Aluminum.

Door: Single door, at least 33"W x 72"H.

Handling: Forkliftable from all sides.

Weight Limit: Total payload/item weight must not exceed 10,000 lbs max.

Tie-Downs: Requires 4 external tie-downs (1 per corner) and 12 internal tie-downs.

Leveling: 2,500 lb leveling jack kit included.

Power, Climate Control & Lighting

Power Input: 120/208VAC, 3-Phase, 60Hz.

Power Outlets: Minimum of four (4) outlets located on the interior wall.

Surge Protection: Transient Voltage Surge Suppressor (TVSS) unit required.

Lighting: LED lighting required, minimum 322 Lumens.

Climate Control: 42,000 BTU/hr Environmental Control Unit (ECU). The system must operate at moderate temperatures in diverse environments.

Insulation & Ventilation: The shelter does not need to be insulated but must accommodate ventilation based on the ECU type.

Valves: Decompression breather valve.

Safety, Security & Communications

Door Lock: High-security Kaba Mas CDX-10 door lock.

Safety Kit: Must include a fire extinguisher, flashlight, and first aid kit.

Communications: Communications panel required.

Capability Statement Requirements (Submission Instructions)

Interested Small Business vendors who believe they can provide the products described above are invited to submit a Capability Statement. Vendors must submit the following information to demonstrate their ability to meet the requirements:

Company Profile:

Company Name, physical address, and website.

SAM Unique Entity ID (UEI) and CAGE Code.

Primary Point of Contact (Name, Title, Email, and Phone Number).

Business Size & Socio-Economic Status:

State your business size under the applicable NAICS code.

Indicate any applicable socio-economic designations (e.g., Small Business, 8(a), HUBZone, WOSB, SDVOSB).

Technical Capability:

A brief narrative, spec sheet, or commercial brochure demonstrating that your proposed product can meet or exceed all the technical specifications listed.

If your product requires slight modifications to meet the exact requirements (e.g., adding the Kaba Mas CDX-10 lock or the specific tie-down configuration), explain your capability to modify existing commercial-off-the-shelf (COTS) items.

Manufacturing / Lead Time:

Estimated production or delivery lead times for the requested shelters.

Response Guidelines

Capability statements should be limited to no more than 5 pages, excluding generic commercial brochures or spec sheets.

Please submit all responses via email to TSgt Steven Audinet at Sign up to see this detail and MSgt Eric Comes at Sign up to see this detail no later than 1:00 PM CDT on 17 July 2026. The subject line of the email should read: Sources Sought Response - Small Air Mobile Shelters.

Questions: Any questions regarding this notice must be submitted in writing to the email address above by 15 July 2026.