Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

12--CONTROL ASSEMBLY,SI

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity is for the procurement of three Control Assembly, SI units under NSN 1270014565825 for DLA Land and Maritime. The current contract, held by Vertex Modernization and Sustainment LLC, is valued at 60,043.77 dollars and is expected to end on September 10, 2026. The procurement is classified as a likely recompete with a firm fixed price structure and was previously competed under the Simplified Acquisition Procedures. The solicitation will be issued as a Request for Quote and requires electronic submission from all responsible sources. Delivery is required to DLA Distribution San Diego within 168 days after the order is received. The approved source is listed as 072E5 RLG0105-01, and the project falls under NAICS code 334511. Interested parties should coordinate with the point of contact, Kyle Barr, regarding the electronic solicitation.

General Info

DLA Land and Maritime recompete for three Control Assembly units, firm fixed price.

Agency

Department Of Defense → DLA Land And Maritime

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

Place of Performance

OH, 462192001, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMar 10

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Land And Maritime

Contacts1 person available

OfficeCOLUMBUS, OH, 43218-3990, USA

Organization / AgencyDepartment Of Defense → DLA Land And Maritime

Office AddressCOLUMBUS, OH, 43218-3990, USA

Contacts

Kyle Barr

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: SPE7M225P3829 Incumbent: VERTEX MODERNIZATION AND SUSTAINMENT LLC Contract Value: $60,043.77 Potential End Date: 2026-09-10T00:00:00.000Z Competition: COMPETED UNDER SAP Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 55/100)
Proposed procurement for NSN 1270014565825 CONTROL ASSEMBLY,SI: Line 0001 Qty 3 UI EA Deliver To: DLA DISTRIBUTION SAN DIEGO By: 0168 DAYS ADO Approved source is 072E5 RLG0105-01. The solicitation is an RFQ and will be available at the link provided in this notice. Hard copies of this solicitation are not available. Specifications, plans, or drawings are not available. All responsible sources may submit a quote which, if timely received, shall be considered. Quotes must be submitted electronically.

Similar Contracts

Same NAICS industry code

CASE, OPTICAL INSTRU

Solicitation # SPE4A7-27-T-2370

Solicitation SPE4A7-27-T-2370 is a request for quotations from the Defense Logistics Agency Weapons Support ASC for the procurement of 238 units of optical instrument cases, identified by NSN 5855-01-682-4653. The delivery requirement is set for 131 days after the order date, with a target ship date of February 1, 2026, and a final delivery date of May 11, 2026. Shipping is designated as FOB Origin, with the delivery destination located in New Cumberland, Pennsylvania. While the solicitation is listed as a total small business set-aside in the metadata, the document text specifies it is not a small business set-aside. The contract imposes strict technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Eligible offerors must possess an approved US/Canada Joint Certification Program certification and DLA approval to access export-controlled technical data. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Packaging and marking must adhere to MIL-STD-129 and MIL-STD-2073-1E. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment for domestic sourcing.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

SUTURE, ABSORBABLE, SURG

Solicitation # SPE2DS-27-T-1106

Solicitation SPE2DS-27-T-1106 is a small business set-aside request for quotations issued by the DLA Troop Support Medical Supply Chain for the procurement of one box of absorbable surgical sutures. The required item is a natural plastic glycolide lactide copolymer, size 4-0, 27 inches in length, with a 3 1/2 circle and 36 sutures per box, identified by NSN 6515-01-604-1967. The product must have a non-extendable shelf life of 60 months. Delivery is required within 20 days after order, with the destination for both inspection and acceptance located at Fort Wainwright, Alaska. The contract mandates strict adherence to Medical Marking Standard No. 1, which supersedes MIL-STD-129, and requires packaging in accordance with MIL-STD-2073-1E and DLA procurement standards. Bidders must specify the source and part number and provide a complete data package if proposing an alternate part. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. The acquisition falls under NAICS code 334511.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-7572

Solicitation SPE4A6-27-T-7572 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of one unit of Instrumentation I IST, identified by part number 724S3386-101. The item is to be provided by The Boeing Company USA, located in Ridley Park, Pennsylvania. The required delivery date is October 21, 2026, with a delivery timeframe of five days after receipt of the order. The shipment is designated as FOB Destination, with the final delivery point located at Camp Humphreys in Pyeongtaek, South Korea. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, while noting that the DLA Master List of Technical and Quality Requirements takes precedence. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The procurement is governed by various FAR and DFARS clauses, including the Buy American Act, NIST SP 800-171 cybersecurity assessment requirements, and specific prohibitions on covered defense telecommunications equipment. The assigned NAICS code for this effort is 334511.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1786

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE4A6-27-T-7571

Solicitation SPE4A6-27-T-7571 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of one unit of Instrumentation I, a non-NSN item identified by CAGE/PN 81205 / 2616325 and associated with The Boeing Company. The item is assigned NAICS code 334511 and is to be delivered FOB Destination to Malmstrom AFB, Montana, with an original required delivery date of October 23, 2026. Delivery is required within 20 days after the order is placed, and the shipment must be made via the fastest traceable means, specifically prohibiting the use of parcel post. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements taking precedence. Palletization must follow RP001 guidelines. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program. Additionally, the contractor must adhere to cybersecurity reporting under DFARS 252.204-7012 and prohibitions on covered defense telecommunications equipment. Inspection and acceptance will occur at the destination per FAR 52.246-1.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Repair and Overhaul of Control and Status Units (NSN 1680-01-582-7988)This subcontract involves the repair and overhaul of Control and Status units under NSN 1680-01-582-7988 for the Department of Defense agency Navsup Weapon Systems Support. The scope of work includes the teardown, evaluation, repair, and modification of units for prime contractors, ensuring all work is executed according to technical publications. The contractor is responsible for disassembling units, performing necessary testing and inspections, applying markings in accordance with MIL-STD-130, and maintaining detailed historical record files to deliver units in Ready For Issue condition. To qualify for this project, the contractor must maintain ISO-9001 or Mil-Q 9858 quality systems and ensure full compliance with IPC/EIAJ-STD-001C soldering standards. The opportunity falls under NAICS code 334511 and was posted on October 29, 2026, with a response deadline of November 30, 2026.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Automated Traffic Enforcement Trailer

Solicitation # W911S226U4411

Solicitation W911S226U4411 is a Total Small Business Set-Aside for the procurement of a complete, towable, autonomous mobile traffic enforcement trailer and laser-based measuring system for the Department of Defense at Fort McCoy, Wisconsin. The primary requirement is for one Automated Traffic Monitoring System Trailer, specifically the POLISCAN Speed FM1 or an approved equal, capable of tracking multiple vehicles across at least four adjacent traffic lanes to enforce speed limits and red-light violations. The contract includes a requirement for eight hours of on-site operator training at Fort McCoy and a minimum 12-month comprehensive manufacturer's warranty. All equipment must be new, and the system must be calibrated to federal and state standards to ensure data is legally admissible in court. The award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical evaluations. Delivery is required F.O.B. Destination to Fort McCoy, with a preferred delivery window of 30 days. Offerors must submit their proposals via the PIEE Solicitation module, including technical, price, and past performance documentation. A critical requirement for responsiveness is the completion of Attachment 1 regarding certifications and the identification of the country of origin. The contract incorporates various regulatory clauses, including Buy American preferences, cybersecurity reporting under DFARS 252.204-7012, and prohibitions on certain telecommunications equipment.

W6QM Micc-Ft Drum

POSTED

about 7 hours ago

DEADLINE

66--INDICATOR,ATTITUDE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB18

This solicitation, issued by NAVSUP Weapon Systems Support Philadelphia, is a Request for Quotations for the repair, overhaul, upgrade, and inspection of 33 Attitude Indicators (NSN 6610-01-101-1927 LC, P/N 622-3374-002). The objective is to return these units to a Ready For Issue condition, ensuring they perform reliably in operational environments. The contract includes an initial induction period of 365 calendar days, which the government may extend by an additional year. Offerors must provide option pricing for a maximum of 135 units over the total contract period. Award will be granted to the offeror with the lowest price technically acceptable quote, with past performance evaluated via the DoD Supplier Performance Risk System. The contractor is responsible for providing all labor, facilities, materials, and tooling, as government-furnished manufacturing aids are not provided. Key technical requirements include compliance with ISO 9001 or SAE AS9100 quality systems and calibration standards such as ANSI/NCSL Z540.3 or ISO-10012-1. Specific prohibitions are in place regarding the use of MIL-W-81381 wire, requiring the use of SAE-AS22759 series wire instead. The contract establishes strict protocols for Beyond Economical Repair and Missing on Induction determinations, both of which require written concurrence from DCMA. Deliveries are FOB Destination with a 90-day delivery window, and all packaging must adhere to MIL-STD-2073 and MIL-STD-129 standards. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

58--THERMAL IMAGING SYS

Solicitation # N0010426RQA81

Solicitation N00104-26-R-QA81, issued by NAVSUP Weapon Systems Support Mechanicsburg, is an unrestricted, firm-fixed-price procurement for the manufacture of 40 Thermal Imaging Systems (NSN 5855-01-499-1240). The systems must conform to the design represented by Cage Code 53711, reference number 7287197, and adhere to TDP Version 003. The government requests delivery 180 days after award, with inspection and acceptance occurring at the origin. The government intends to make a single award based on the most advantageous proposal, prioritizing past performance over price. Evaluation of past performance may include data from the DoD Supplier Performance Risk System. Offerors must be authorized distributors of the original manufacturer and submit proposals via NECO or email. Contractors are required to follow strict quality and packaging standards, including MIL-STD-2073 for preservation and MIL-STD-130 for physical identification. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. The contract incorporates various federal and defense clauses, including requirements for cybersecurity under DFARS 252.204-7012, Buy American preferences, and specific safeguarding protocols for sensitive conventional arms and explosives.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

66--PROCESSOR,FLIGHT IN, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB19

Solicitation N0038326QBB19, issued by NAVSUP Weapon Systems Support Philadelphia, is a request for quotations for the teardown, evaluation, repair, and modification of Flight Processors (NSN 6610-01-622-1414). The contract covers a maximum of 30 units over a potential two-year period, with a delivery requirement of 90 days and FOB Destination terms. Award will be based on Lowest Price Technically Acceptable criteria, though past performance is noted as more important than price. Because the item is flight critical, government source approval is mandatory prior to award. The contractor is responsible for providing all labor, materials, and tooling necessary to return units to Ready For Issue condition, as the government will not provide manufacturing aids. Strict quality standards are mandated, including compliance with ISO 9001 or SAE AS9100 and calibration standards such as ANSI/NCSL Z540.3. Key technical requirements include the prohibition of MIL-W-81381 wire in favor of SAE-AS22759 and adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. The contractor must maintain comprehensive quality control documentation and historical record files for each serial number, with formal Material Review Board authority for as-is dispositions retained by the government.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

58--THERMAL IMAGING SYS, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RQA79

This unrestricted negotiated solicitation, issued by NAVSUP Weapon Systems Support Mechanicsburg, seeks a firm fixed-price contract for the teardown, evaluation, repair, and modification of a Thermal Imaging System (NSN 7HH 5855-01-499-1240). The government requests a delivery date of 180 days after award, with inspection and acceptance occurring at the origin. All repair work must adhere to the contractor's standard overhaul practices and original manufacturer specifications, with physical identification complying with MIL-STD-130. Consideration for award is limited to authorized distributors of the original manufacturer, who must provide proof of status on company letterhead. The contract mandates strict quality assurance and packaging standards, including the use of MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Contractors are required to maintain inspection records for 365 days following final delivery and must utilize the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. Special requirements include compliance with cybersecurity standards for covered defense information, the provision of Material Safety Data Sheets for hazardous materials, and adherence to Buy American and Balance of Payments program certifications. Proposals must be submitted via NECO or email, and any existing Basic Ordering Agreement (BOA) terms will take precedence in the event of a conflict.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

NERC Compliant Battery Monitoring SystemThis subcontract involves the supply and configuration of battery monitoring systems for prime contractors working on Dalton Utilities energy facility projects in Georgia. The scope of work includes providing monitoring sensors, data acquisition hardware, and specialized software designed to track battery health and performance. A critical requirement of the delivery is that the functional system must maintain full compliance with NERC PRC-005-06 standards. The opportunity was posted on October 28, 2026, with a response deadline of November 11, 2026. Classified under NAICS code 334511, the contract focuses on the delivery of a fully operational Battery Monitoring System to ensure the reliability and safety of the utility's energy infrastructure.

Dalton Utilities

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Land And Maritime

Same awarding agency

Pressure Switch Component SupplierThe Pressure Switch Component Supplier subcontract involves providing essential raw materials and sub-components to prime contractors manufacturing pressure switches for DLA Land and Maritime. The scope of work includes the delivery of high-grade alloys, specialized polymers, conductive materials, springs, electronic contacts, and specialized seals. All supplied materials must adhere to strict performance tolerances and specific coating requirements to ensure operational integrity. To maintain quality standards, the supplier is required to provide comprehensive material certifications and Certificates of Conformance for all deliveries. The contract falls under NAICS code 335999 and supports the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Pressure Switch Manufacturer (NSN 5930-01-324-5328)This subcontract involves the manufacture and supply of pressure switches, specifically NSN 5930-01-324-5328, for prime contractors supporting DLA Land and Maritime hardware. The selected provider must utilize precision machining and assembly equipment to fabricate these switches in strict accordance with military specifications or approved technical data. A critical requirement of the contract is the submission of application packages through the DLA Weapons Support Alternate Offer/Source Approval Request Program to obtain AMC 3C approval. This opportunity falls under NAICS code 335313 and is managed by the Department of Defense.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Switch, Pressure

Solicitation # CM26239122

DLA Land and Maritime, specifically the FMS Tactical LTC Team at DLA Weapons Support - Columbus, is conducting a sources-sought market survey for the procurement of Pressure Switches under NSN 5930-01-324-5328. The agency is seeking information from potential vendors regarding delivery timelines, quantity capabilities, and pricing structures to determine the feasibility of an Indefinite Delivery Contract with a proposed three-year base period and subsequent one-year option periods. The government is specifically looking for data on commercial availability and is requesting drawings or bills of materials to identify similarities between commercial and military equivalents. The current approved source for this item is Cameron Energy Services Corp, identified by CAGE code 05991 with multiple associated part numbers. Due to the AMC 3C designation, this part requires engineering source approval to maintain quality, as the approved sources retain essential technical data and manufacturing knowledge. Other companies wishing to be qualified as approved sources must submit an application package through the DLA Weapons Support Alternate Offer/Source Approval Request Program to demonstrate their ability to manufacture the product to the same or better quality than the original equipment manufacturer. Responses should be directed to Contract Specialist Caitlin Ferry by the deadline of November 4, 2026.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

INSULATING COMPOUND,ELECTRICAL

Solicitation # CM26161009

This pre-solicitation notice, issued by DLA Land and Maritime (SPE7MX), seeks offers for electrical insulating compound under National Stock Number 5970-002957568. The requirement is for a specific type HF compound in one gallon cans, conforming to specification MIL-DTL-3064C (or MIL-I-3064). The government is considering an Indefinite Delivery Contract (IDC) structure, typically featuring a three-year base period with the possibility of two to four one-year option periods. The total annual demand quantity is 927 gallons, with price break ranges solicited from 58 to 1,392 gallons. The solicitation is expected to be available on DIBBS on or after October 30, 2026, with a final response date of December 2, 2026. Performance will take place in Columbus, Ohio, with a required delivery timeframe of 45 days. Award decisions will be based on a combination of price, delivery, past performance, and other evaluation factors. This acquisition follows simplified acquisition procedures for commercial items under FAR Part 12.201. Because the government does not possess complete technical data, it intends to contract only with approved sources under 10 U.S.C. 3204(a)(1). All offers must be submitted in English and in U.S. dollars.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 1 month

HEADSET-MICROPHONE : NSN 5965-01-204-8505

Solicitation # SPE7MX26RX089

This acquisition is for the procurement of microphone headsets under NSN 5965-01-204-8505 with an estimated annual demand quantity of 982 units. The contract will be structured as a Firm-Fixed Price Indefinite Delivery Contract consisting of a three-year base period with two one-year options. This is an unrestricted solicitation governed by FAR Part 12.201 for commercial items and is subject to the Buy American Act. The NAICS code for this requirement is 334310 with a size standard of 750. The solicitation is expected to be issued around October 30, 2026, with responses due by November 30, 2026. Delivery is required within 426 days after the date of order, and shipping is designated as FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties can access technical data via the TDMT landing page and should submit their offers in US dollars through the DIBBS system or via email to the contract specialist.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7MX26RX102

DLA Land and Maritime is seeking offers for a Firm-Fixed Price Indefinite Delivery Contract for Marine Hatches, identified by NSN 2040-01-357-9117. This acquisition is a 100 percent Small Business Set-Aside under NAICS code 332510, with an estimated annual demand quantity of 20 units. The contract structure consists of a three year base period followed by two option years, and all items must comply with the Buy American Act and specific technical drawings available via TDMT. The solicitation is expected to be issued around October 30, 2026, with a response deadline of November 30, 2026. Required delivery is within 241 days after the date of an order, and shipping is FOB Origin. Award decisions will be based on a combination of price, delivery, and performance. Interested parties should submit their offers in US dollars and English through the DIBBS system or via email to the contract specialist, Brandon Preece.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Specialized Maintenance ToolingThis subcontract opportunity with the Department of Defense, specifically for DLA Land and Maritime, involves the manufacture and supply of specialized maintenance tooling for diesel engines. The selected provider will be responsible for fabricating diagnostic equipment and specialized hand tools that meet or exceed original equipment manufacturer quality specifications, ensuring all deliverables align with specific National Stock Numbers. The procurement falls under NAICS code 332212 and is intended to support prime contractors delivering on DLA Land and Maritime supply contracts. Interested parties must note the response deadline of November 4, 2026, to submit their proposals for this specialized fabrication requirement.

Hand and Edge Tool Manufacturing

POSTED

DEADLINE

Engine Gaskets and Seal KitsThis subcontract opportunity involves the manufacture and supply of sealing components and comprehensive repair kits for prime contractors supporting DLA Land and Maritime. The scope of work includes the fabrication of gaskets and O-rings, as well as the assembly of multi-part diesel engine repair kits identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all products meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Fuel Injection and Fluid System ComponentsThis subcontract opportunity with DLA Land and Maritime involves the manufacture and supply of precision fuel delivery and fluid control components. The scope of work includes the precision machining and calibration of specific parts such as metering pumps, safety relief valves, calibrated flow valves, and fuel injection nozzles, all identified by specific National Stock Numbers. To be eligible, providers must obtain DLA Approved Source qualification to ensure all components meet or exceed original equipment manufacturer quality specifications. The solicitation was posted on October 20, 2026, with a response deadline of November 4, 2026, falling under NAICS code 333618.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

Heavy Engine Component ManufacturingThis subcontract for Heavy Engine Component Manufacturing involves the production and supply of high-tolerance structural diesel engine parts, including cylinder heads, camshafts, connecting rods, and vibration dampeners. The selected provider will perform casting, machining, and finishing services to support prime contractors fulfilling DLA Land and Maritime supply contracts. All delivered components must be identified by specific National Stock Numbers and meet or exceed original equipment manufacturer quality specifications. To qualify for this opportunity, providers must submit a Source Approval Request through the DLA Alternate Offer program. The contract falls under NAICS code 332710 and is managed by the Department of Defense. Interested parties must submit their responses by the deadline of November 4, 2026.

POSTED

DEADLINE

MULTI NSN DIESEL ENGINE

Solicitation # CM26259595

DLA Land and Maritime is conducting a sources-sought market survey under solicitation CM26259595 to identify potential manufacturers for a wide array of diesel engine components and assemblies. The scope of work includes the procurement of various parts identified by National Stock Numbers, such as cylinder heads, camshafts, connecting rods, fuel injection nozzles, gaskets, and specialized maintenance tools. Interested parties must provide the location of the manufacturer and relevant points of contact to Contract Specialist Zachary Mullins by the response deadline of November 4, 2026. Companies seeking to be qualified as an Approved Source must submit a Source Approval Request through the DLA Land and Maritime Alternate Offer program. This application package must include all necessary technical data to demonstrate that the prospective contractor can manufacture products that meet or exceed the quality of the Original Equipment Manufacturer. The process is categorized under NAICS code 333618, and the primary objective is to identify capable sources who can provide the specific engine components and repair kits detailed in the provided NSN list.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

SEAL, PLAIN 6649

Solicitation # SPE7MX26RX033

This solicitation seeks to establish an Indefinite Quantity Contract for stock replenishment of plain seals to support military depots. Managed by DLA Weapons Support in Columbus, Ohio, the requirement focuses on NSN 5330-00-631-6649 with an estimated annual demand of 15,721 units. The procurement is designated as a Total Small Business Set-Aside and will be conducted using other than full and open competition procedures, as the items are available from a limited number of approved sources including The Timken Corporation, Randall Mfg Co Inc, Basic Rubber and Plastics Co, and PDI Ground Support Systems, Inc. The solicitation is expected to be available around October 20, 2026, with a response deadline of November 5, 2026. While price is a significant factor, the final award decision will be based on a combination of price, past performance, and delivery. Interested responsible sources may submit quotes via the DIBBS portal, though drawings and specifications will not be provided through that system.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

6515--PATIENT SIMULATOR

250-NETWORK Contract Office 10 (36C250)

POSTED

over 1 year ago

DEADLINE

66--COMPASS,MAGNETIC,MO

Solicitation # SPE4A725T067M

POSTED

over 1 year ago

CLOSED

over 1 year ago

66--DETECTOR,GAS

DLA Land And Maritime

POSTED

over 1 year ago

DEADLINE

Down Converters - Sole Source

Nuwc Division Newport

POSTED

over 1 year ago

DEADLINE

59--PANEL,ELECTRICAL-EL

POSTED

over 1 year ago

DEADLINE

Vehicle Recompete: Idc N0003922D1003

POSTED

over 1 year ago

DEADLINE

58--RECEIVER-TRANSMITTE

POSTED

over 1 year ago

DEADLINE

58--CONTROL PANEL ASSY

POSTED

over 1 year ago

DEADLINE

66--CONNECTOR,SAVER

POSTED

over 1 year ago

DEADLINE

66--PROBE ASSEMBLY,DETE

POSTED

over 1 year ago

DEADLINE

66--Instrumentation I IST

POSTED

over 1 year ago

DEADLINE

63--SENSING ELEMENT,FIR

POSTED

over 1 year ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS