Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

This Event opportunity from Department Of Defense was posted on June 17, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

13--High and Low Velocity 40mm Target Practice Day/Night/Thermal (TP-DNT) Industry Day

Closed
W15QKN14ZA001Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332993
New
Federal
155mm Modular Artillery for Combat Effectiveness (MACE)
Solicitation # W15QKN26R1C5R
The 155mm Modular Artillery for Combat Effectiveness (MACE) program is a prototype effort managed by the U.S. Army Contracting Command – Rock Island at Picatinny. Conducted as an Other Transaction Agreement (OTA) under 10 U.S.C. § 4022, the project seeks to develop a manufacturable 155mm cargo-carrying artillery projectile system. The effort is divided into two phases: Phase I focuses on achieving a range of 30 to 35 km, and Phase II targets ranges exceeding 35 km. The system must be compatible with the M777A2 Lightweight Towed Howitzer and M109A7 Paladin Self-Propelled Howitzer, with future adaptability for 52 or 55 caliber systems. The government intends to make up to two awards, evaluating proposals based on schedule for Phase I and technical merit for Phase II. Recent amendments have updated the solicitation to refine the Terms and Conditions, specifically codifying a 30-calendar day review and acceptance timeline. The proposal submission deadline was extended to November 30, 2026, with a final cutoff for industry questions set for November 18, 2026. Proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) Proposal Manager Module. Key requirements include the use of the Wide Area Work Flow (WAWF) system for invoicing and strict adherence to the Buy America Act and National Technology and Industrial Base (NTIB) restrictions. Offerors must provide a Business Status Certification to validate eligibility as a nontraditional defense contractor or nonprofit research institution.
W6QK Acc-Ri-Picatinny

POSTED

2 days ago

DEADLINE

in 12 days
NAICS: 332993
New
Federal
Next Generation Penetrator Development through Production
Solicitation # NGP_DtP
The Next Generation Penetrator (NGP) Development through Production program is a Multiple Award Indefinite Delivery Indefinite Quantity (IDIQ) contract managed by the Air Force Life Cycle Management Center (AFLCMC) at Eglin AFB. The program focuses on the lifecycle management of 2,000 lbs or greater air-to-ground penetrator munitions (GBU-76/B / BLU-142/B), encompassing systems engineering, the development and production of mission-critical subcomponents, and the establishment of a manufacturing line for recurring All-UP-Round deliveries. The contract has a maximum ceiling of $1.3 billion over a base five-year period with an option for three additional years. The government utilizes a best overall value determination, reserving the right to make trade-offs based on evaluation factors including system-level experience, subcomponent experience, integration and test support, and logistics support. The acquisition is categorized under NAICS code 332993 and is not set aside for any specific small business category. Foreign participation is strictly prohibited as either a prime contractor or subcontractor. Offerors must provide proof of AS9100 or ISO 9001 certification and a mandatory Small Business Participation Plan. Due to the nature of the work, many solicitation documents are classified as Controlled Unclassified Information (CUI) Distribution F, requiring interested parties to submit a valid DD Form 2345 and be registered in the Joint Certification Program to receive data via DoDSAFE. Invoicing and payment requests are processed electronically through the Wide Area WorkFlow (WAWF) system.
FA8681 Aflcmc Ebd

POSTED

3 days ago

DEADLINE

in 5 days
NAICS: 332993
International
Demolition Kit, Bangalore Torpedo M1A2
Solicitation # W8703-270117/A
The Department of National Defence is soliciting offers for the procurement of Demolition Kit, Bangalore Torpedo M1A2, a specialized explosive charge used by combat engineers to breach barbed wire and clear anti-personnel mines. The requirement consists of a firm quantity of 528 units, split equally between the Canadian Forces Ammunition Depot (CFAD) Dundurn and CFAD Angus, with delivery required by November 1, 2028. Additionally, there is an unfunded optional quantity of 264 units for delivery between September and November 2031. Each kit must include 10 high-explosive tube assemblies, 10 connecting sleeves, and one nose sleeve, all designed and tested in accordance with MIL-DTL-2087E and delivered Delivered Duty Paid (DDP). The contract will be awarded to the compliant offer with the lowest evaluated price, based on a pass/fail technical evaluation of mandatory criteria. Bidders must certify that materials are new and asbestos-free, and they must comply with the Controlled Goods Program and ISO 9001:2015 quality standards. Key requirements include the provision of bilingual Safety Data Sheets, adherence to Transport Canada and UN Model Regulations for dangerous goods, and the acquisition of US DOT EX numbers if applicable. Proposals must be submitted in English or French by December 1, 2026, and must include a separate financial proposal in Canadian dollars.
Department of National Defence

POSTED

13 days ago

DEADLINE

in 12 days
NAICS: 332993
Federal
13--RING,CLAMPING
Solicitation # N0010425QNC18
Solicitation N00104-25-Q-NC18 is a total small business set-aside issued by NAVSUP Weapon Systems Support for the procurement of three clamping rings (NSN 1350-01-671-1961). The requirement is pursued under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. The scope includes the manufacture of the rings in accordance with Technical Data Package version 006 and drawing 6964634. A critical technical requirement is that all materials must be mercury-free, as the components are intended for use on surface ships and submarines. The contract mandates a rigorous quality assurance process, including compliance with ISO 9001 standards and the performance of both First Article Testing and Production Lot Testing. These non-destructive tests are conducted by the government at Naval Station Newport, RI. The delivery period is 400 days, with shipping terms set as FOB Destination to the DLA Distribution New Cumberland facility in Pennsylvania. Award will be made to a single responsible offeror based on a determination of the most advantageous offer, with past performance weighted as more important than price. Administrative requirements include the use of the Wide Area Workflow system for invoicing and receiving reports. Packaging and marking must adhere to MIL-STD-2073 and MIL-STD-129. The solicitation has undergone multiple amendments, with the most recent extension moving the response deadline to November 30, 2026.
Navsup Weapon Systems Support Mech

POSTED

20 days ago

DEADLINE

in 12 days

AI Contract Overview

Show more

This contract pertains to the acquisition of Engineering and Manufacturing Development (EMD), Low Rate Initial Production (LRIP), and production of High and Low Velocity 40mm Target Practice Day/Night/Thermal (TP-DNT) cartridges. A series of Industry Days and information releases were conducted throughout early 2014 to provide potential offerors with draft Requests for Proposals (RFPs), performance specifications, Statements of Objectives, and Bid Sample Test Plans. These documents were made available for review and feedback, with deadlines for industry comments and End User Certificate submissions clearly outlined. The Government emphasized that these communications did not constitute a formal RFP or commitment to award and that all draft details were subject to change. Key process requirements include obtaining contractor codes for bid sample submissions, proper handling of export/import documentation including ATF permits, and adherence to trade compliance measures such as End User Certificate requests and environmental and storage testing criteria added to the technical evaluation. Additionally, the contract highlights logistical and procedural considerations such as the need for strict attendance limits at Industry Day events, security protocols for participants including pre-registration and identification, and prohibitions against proprietary trade secret disclosures during discussions. The contract also requires that all importers coordinate with the Bureau of Alcohol, Tobacco, Firearms, and Explosives (ATF) to secure appropriate permits and follow importation guidelines for ammunition and defense articles. Clarifications were provided on bid sample quantities, import permit timelines, and documentation instructions for exporters and contractors seeking to participate in the procurement process. Overall, the contract underscores a structured, transparent development and procurement approach for specialized 40mm ammunition, ensuring compliance with government regulations and facilitating industry engagement through staged informational and feedback sessions.

General Info

Acquisition of High/Low Velocity 40mm TP-DNT cartridges with structured industry engagement and compliance.

NAICS

332993 - Ammunition (except Small Arms) Manufacturing

Place of Performance

NJ

Set-Aside

NONE

Documents

0

No documents available

No documents were posted with this contract.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

This one is closed. Find the next one like it.

Open contracts like this one, right now:

  • 155mm Modular Artillery for Combat Effectiveness (MACE) Open now, due in 12 days
  • M82 EnergeticsOpen now, due in 30 days
See open contracts like this

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

19 updates
PhaseClosed
Posted

event

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Notice updated

Notice details unchanged. Attachments may have changed.

Notice updated

The notice description changed.

Notice updated

The notice description changed.

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Pica
ContactsNo contacts available
OfficePICATINNY ARSENAL, NJ, 07806-5000, USA
Office AddressPICATINNY ARSENAL, NJ, 07806-5000, USA
ContactsNo contact information available

Full Description

Show more
*UPDATE: (17 June 2014) Contractor Codes are available and may be requested through the Contracting POCs. Any offeror planning to propose and submit Bid Samples for this procurement will be required to request a contractor code. The Government will no longer require Control Numbers for this procurement as previously stated. Offerors will be required to include their Contractor Code on each round submitted for the Bid Sample Test. When requesting a code, the contractor must specify whether a code is needed for HV, LV, or both. *Regarding the DRAFT RFP posted on 14 May 2014: The date for Industry feedback has been extended. Feedback is requested from Industry by 30 May 2014. *Questions and Answers from Industry Day on 15-16 April 2014 have been posted under additional documentation. *14 May 2014: DRAFT RFPs for both High Velocity and Low Velocity can be found attached to this announcement. The DRAFT RFPs are intended to provide offerors with the most updated information that the Government plans to include in the final RFP. However, offerors are cautioned that this is still just a DRAFT and all information including, but not limited to, Section B (CLIN Structure), Section C (SOO), Section H Down Select Criteria, Section L Proposal Instructions, and Section M Evaluation Criteria is subject to change. Feedback is requested from Industry by 23 May 2014. Attachments have been uploaded under Additional Documents. *12 May 2014 Updates: Recent pyrophoric 28-day Temperature and Humidity and Long Term Storage testing discovered material performance degradation and structural integrity issues. Due to this new information, the Government will add Environmental & Storage as an element under the Technical evaluation of the Request For Proposal for the Low Velocity and High Velocity TP-DNT program. Clarification for EUC submittals: If the country in which your company is exporting your bid samples from requires an End User Certificate for Solicitations W15QKN-14-R-0038 40mm LV TP DNT and W15QKN-14-R-0039 40mm HV TP DNT, the quantity requested shall be 100 for LV and 128 for HV. The USG will also not accept additional rounds above the USG requirement (100 for LV and 128 for HV). Any offeror who requests additional quantities will be informed that the USG immediately does not concur with a request of this nature, and the Offeror shall resubmit their EUC request with the USG requirement quantity. ATF Information: Any offeror requiring import of an article from a foreign nation shall follow the ATF Guidebook - Importation & Verification of Firearms, Ammunition, and Implements of War as found on the following website to ensure that the importer has the correct ATF licenses/forms applicable to the importation process and transfer of items to USG (ATF Forms 6, 2 and 5): http://www.atf.gov/files/firearms/guides/importation-verification/download/firearms-imporation-verification-guidebook--complete.pdf The offeror is reminded that all ATF license coordination is the responsibility of the offeror. Any questions surrounding what ATF paperwork is required shall be directed to the ATF Industry Liaison, Desiree M. Dickinson at Sign up to see this detail or Sign up to see this detail. The Term quote mark AMMUNITION quote mark means ammunition or cartridge cases, primers, bullets or propellant powder designed for use in any firearm. Special attention is drawn to the following: 1) An approved import permit on ATF Form 6, Application and Permit for Importation of Firearms, Ammunition and Implements of War, is required to import these articles into the United States and allows the importation of the articles listed on the form. A permit is valid for one year from its approved date. 2)To obtain approval of submitted applications, the items to be imported must be correctly and completely identified on the ATF Form 6. In the case of new or unusual firearms, photographs and drawings of all markings should be submitted with the permit. It is strongly recommended that persons wishing to import firearms, ammunition, and defense articles first determine if the items are importable and then obtain an approved ATF Form 6 before acquiring the items abroad or attempting to bring them into the United States. Items may be conditionally imported pursuant to 18 U.S.C. 925(d) and/or 26 U.S.C. 5844. 3) It typically takes the Firearms and Explosives Imports Branch (FEIB) personnel four to six weeks to process a properly executed ATF Form 6 import permit application. Permit Application Tracking System One tracking method employed by importers involves the use and placement of an internal control number or optional number (as assigned by the Government) generated by the importers on the permit applications they submit. ATF encourages the use of internal control numbers or optional numbers by importers. Importers who elect to use an internal control numbers or optional numbers (composed of no more than 20 alpha-numeric characters) should place these numbers at the top of their ATF Forms 6 in the space entitled For Applicant's Optional Use. Our database will allow us to capture these unique numbers as a key field, and allows us to search for a given application the unique number established by the importer. If the items will be utilized on a Government contract or solicitation please ensure to include the Contract or Solicitation Numbers on your paperwork. *This is an update to the EUC language published on 17 April 2014. Any offeror requiring an End User Certificate (EUC) shall submit a request with the following information: 1. Request shall be submitted on contractor letterhead. 2. List of supplier(s) and prime contractor. 3. Description of item along with the quantity being shipped. 4. Rationale for why the EUC is being requested. 5. The number of days that the supplier's country requires a DVC Please keep in mind that High Velocity and Low Velocity will be two separate solicitations and if the offeror plans to submit bid samples for each, then two EUC requests will need to be submitted. The applicable solicitation numbers are listed below. Please be sure to include the correct number in the EUC request. All requests must be staffed to the Army Acquisition Executive, Ms. Heidi Shyu. The Government requests that all EUC requests be submitted by COB 03 May 2014. Any EUC requests received after this date will not be valid grounds to extend the RFP closing date. The attached sample request letter is provided for your reference to further assist in this process and ensure the US Government has the information required to process the EUC. High Velocity: W15QKN-14-R-0039 Low Velocity: W15QKN-14-R-0038 *A list of the 15 April 2014 Industry Day Attendees is now available under additional documents. *Interface Control Drawings (ICDs) are available for both High and Low Velocity. These documents are available upon request with a signed DD2345. *If the country in which you are exporting your bid samples from requires an End Use Certificate (EUC) or another type of import documentation, please submit your request and all required documentation to the Contracting Office POCs listed on slide 8 of the Industry Day 2 presentation as soon as possible. It is up to each company to determine what their country or their supplier's country requires to export to the US. The process of obtaining an EUC can take some time so it is imperative that the company submits this quickly. *(15 April 2014) Please see additional documents for Questions and Answers submitted prior to the 40mm DNT Industry Day. *Please see additional documents for the 40mm TP-DNT Industry Day Brief Slides. *(11 April 2014) Updated Draft Performance Specifications, Draft Statement of Objectives (SOO), and Draft Bid Sample Test Plans are available upon request for review prior to industry day with a completed and signed DD 2345 form. * Please see Additional Documentation for instructions on obtaining an Interim Hazard Classification (IHC). **The Government Industry Day Briefing will occur on 15 April 2014 and one-on-one sessions will be moved to 16 April 2014 with the first session beginning at 8:00am. **The location of Industry Day has been changed from the Homeland Defense Technology Center in Rockaway, NJ to the Hilton Garden Inn located in Rockaway, NJ. The Army Contracting Command - New Jersey (ACC-NJ) and the Project Manager, Maneuver Ammunition Systems (PM MAS) will be hosting a second High and Low Velocity 40mm Target Practice Day/Night/Thermal (TP-DNT) Industry Day. The Industry day has been scheduled for 15-16 April 2014 at the Hilton Garden Inn located in Rockaway, NJ and will start at 9:00 AM EST, with onsite registration beginning at 8:00 AM EST. The purpose of this Industry Day is to provide information regarding the planned acquisition of Engineering and Manufacturing Development (EMD), and Low Rate Initial Production (LRIP)/Production of the High and Low Velocity 40mm TP-DNT cartridges. This announcement should not be construed as a Request for Proposal (RFP) or a commitment by the U.S. Government. The U.S. Government does not intend to award a contract on the basis of this Industry Day. Interested participants must pre-register for Industry Day by completing the registration form attached to this announcement. No more than five (5) representatives may attend from each company. This will be strictly enforced. All representatives MUST provide a government form of photo identification at registration. Please send the completed registration form electronically to Ms. Trisha Fitton at Sign up to see this detail and to Mr. William Labance at Sign up to see this detail no later than 14 March 2014. Industry Day will be broken down into two (2) parts: (1.) General session and (2.) One-on-One session. The general session will be scheduled for the morning and will cover acquisition strategy, requirements (tradeable vs. non-tradeable) and the Bid Sample Test Plan (BSTP). The one-on-one session will be conducted in the afternoon. For planning purposes, companies interested in conducting one-on-ones must notify Ms. Trisha Fitton at Sign up to see this detail and Mr. William Labance at Sign up to see this detail no later than 18 March 2014. A more definitive agenda will be posted at a later date. Draft Performance Specifications (updated since the release of the market survey and first Industry Day), a Statement of Objectives (SOO), and the BSTP will be available upon request for review prior to industry day with a completed and signed DD 2345 form. A draft RFP will also be posted prior to the Industry Day. The Government encourages industry participants to submit any questions, comments, or concerns regarding the draft performance specifications, SOO, BSTP, draft RFP or anything else, via the Q&A form provided (see attachment to this announcement). The Q&A form should be provided to Ms. Trisha Fitton and Mr. William Labance no later than 18 March 2014 to allow for discussion/response at the Industry Day. Please note that all questions and answers will be posted publically and information will NOT be treated as proprietary, unless specifically stated otherwise with the appropriate justification provided. Please be aware that keeping good ideas or solutions as proprietary may preclude them from being incorporated into the solicitation. The following are the TP-DNT Industry Day Rules of Engagement (ROE): The Government intends to use this forum to better refine its requirements, not to elicit trade secrets.. Contractor personnel shall be limited to a total of five attendees per participating company. No sales pitches allowed from industry; no give-aways. No cameras, tape recorders, or other reproduction devices are allowed. Restrict comments/questions to the topics listed in this forum. Contractor personnel must be identified in advance, and only advance substitutions (24-hour in advance notice) will be permitted. Please note: Non U.S. Citizens require special pre-registration approval and will not be able to be substituted. The required paperwork for both U.S. and non U.S. Citizens has been provided as an attachment to this announcement.

More opportunities from Department Of Defense → W6QK Acc-Pica

Same awarding agency

NAICS: 541511
Federal
Software Integration and Interoperability ServicesThe contract awards services to maintain and enhance associative interfaces between ABAQUS and leading third-party CAD tools including Pro/ENGINEER, CATIA, and Wave6, ensuring seamless data exchange and workflow integration for engineering simulation users. The work focuses on sustaining existing interoperability capabilities while advancing functionality to support evolving software versions and user requirements, with an emphasis on reliability, performance, and user experience across multi-platform environments. This effort supports defense-related engineering workflows by bridging design and analysis ecosystems critical to product development and simulation fidelity. The contract is classified as a subcontract under NAICS code 541511 for custom computer programming services, issued by the Department of Defense through its W6QK Acc-Pica agency, with performance required in Waltham, Massachusetts, 02451. Although details such as solicitation numbers and point of contact are not provided, the posting date of May 14, 2026 indicates the agreement is anticipated to commence following a future competitive process. The scope demands deep technical expertise in CAE software architecture, API development, and cross-platform integration to ensure continued compatibility and functionality between industry-standard design tools and ABAQUS simulation solutions.
Custom Computer Programming Services

POSTED

6 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Get AI-powered intelligence on the opportunities still open

Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.

Miguel
Hillary
Keith Deutsch
Christine

Join 900+ contractors already using CLEATUS