Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

1377-00-793-9926, M012, Impulse Cartridge

Awarded
N0010426CK018Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Navy, through the Naval Supply Systems Command Weapon Systems Support, has awarded a contract under solicitation number N0010426CK018 for the procurement of Impulse Cartridges identified by the stock number 1377-00-793-9926. This award is tied to the NAICS code 325920, indicating the work falls under the chemical manufacturing sector, specifically in the production of explosives and propellants. The contract was officially posted on May 8, 2026, and the performance location is designated as Alton, Illinois, with a zip code of 62002. The awarding office is located in Mechanicsburg, Pennsylvania, and is overseen by the Department of Defense. Primary point of contact for the contract is Zachary Dom, reachable via phone at 771-229-2264 or email at zachary.j.dom.civ@us.navy.mil. No set-aside designation has been applied to this award, indicating it is open to all eligible competitors.

General Info

Procurement of Impulse Cartridges for DoD, awarded to Alton, Illinois, via Navsup Mechanicsburg, contract N0010426CK018.

Agency

Department Of Defense → Navsup Weapon Systems Support MechView Agency

Contract Value

$551,600

NAICS

325920 - Explosives ManufacturingView NAICS

Place of Performance

Alton, IL, 62002, USA

Set-Aside

NONE

Awardee

RIVERBEND ENERGETICS MFG., LLCView Profile

Award Issued Date

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech
Contacts1 person available
OfficeMECHANICSBURG, PA, 17050-0788, USA
Organization / Agency
Department Of Defense → Navsup Weapon Systems Support Mech
View Agency Profile
Office AddressMECHANICSBURG, PA, 17050-0788, USA
Contacts
Zachary Dom
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
https://api.sam.gov/prod/opportunities/v1/noticedesc?noticeid=314df02762144f0da75b679ed239a585

Similar Contracts

Same NAICS industry code

NAICS: 325920
New
Federal
F-15 SMDC Cord Set
Solicitation # FA821326R3061
The F-15 SMDC Cord Set contract, identified by solicitation number FA821326R3061, involves the procurement of Shielded Mild Detonation Cord lines and kits. These explosive components are critical for the F-15 Eagle aircraft's emergency canopy removal system, ensuring the linear transfer of energy required for aircrew escape during emergencies. This presolicitation was posted on August 17, 2026, with a response deadline of September 12, 2026. The project is managed by the Department of Defense through the Aflcmc Ebhk office located at Hill Air Force Base in Utah. The contract falls under NAICS code 325920 and does not include any specific set-asides.
FA8213 Aflcmc Ebhk

POSTED

1 day ago

DEADLINE

in 2 months
View Details
NAICS: 325920
New
Federal
Manufacturing of Explosive Shape Charges for F-16 Spin Chute Recovery System
Solicitation # FA8615-27-RFI-SCRS
The Air Force Life Cycle Management Center is conducting market research to identify qualified sources for the manufacturing of explosive shape charges used in the F-16 Spin Chute Recovery System. This request for information seeks vendors capable of producing high-precision, cartridge-actuated devices, specifically the Shaped Charge Assembly P/N 52238-1, to support critical flight test missions. The government is considering a firm-fixed-price contract with an estimated 24-month period of performance and is evaluating whether to utilize a small business set-aside or full and open competition. Interested respondents must demonstrate technical expertise in handling sensitive energetics, including Lead Azide and RDX, and possess the necessary licensing and safety certifications. Capabilities in build-to-print execution, radiographic testing, and ITAR compliance are required. To access the full technical data package, vendors must have an active DD Form 2345. Capability statements must be submitted in PDF format within 30 days of publication, detailing the company's manufacturing experience, facility clearances, and relevant past performance in aerospace pyrotechnics.
FA8615 Aflcmc Wamk F16

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 325920
New
SLED
Supply of Dragon Egg Ignition Spheres
Department of Agriculture and Consumer Services

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 325920
New
Federal
1355-01-436-4620 CWFP CABLE ASSY, ADCAP F/MK48 MODS 6 AND 7 TORPEDOES
Solicitation # N0010426RK022
Solicitation N0010426RK022 is a firm fixed price procurement issued by the Department of Defense, specifically NAVSUP Weapon Systems Support, for the manufacture and delivery of MK62 Mod 1 A Cable Assemblies (NSN 1355-01-436-4620) used for ADCAP F/MK48 Mods 6 and 7 torpedoes. The scope includes the delivery of the primary hardware, technical data via CDRLs A001 through A004, and both first article and production lot test samples for destructive testing. The procurement is structured with multiple line items for different delivery quantities and locations, including sites in Rhode Island, Washington, Virginia, and Hawaii, with an additional option for FY28 requirements up to 120 percent of the base requirement. The award will be based on a best value tradeoff determination, evaluating quality, timeliness of delivery, small business utilization, and price reasonableness. Technical requirements mandate adherence to drawing 6894510 Rev H and associated standards, with inspection and acceptance managed by the DCMA and NAVSEA Keyport using MIL-STD-105 and ASQC-Z1.4 standards. The solicitation has undergone several amendments to extend the response deadline, with the final closing date set for October 29, 2026. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing, compliance with NIST SP 800-171A for cybersecurity, and adherence to Buy American and specialty metals restrictions.
Navsup Weapon Systems Support Mech

POSTED

2 days ago

DEADLINE

in about 2 months
View Details
NAICS: 325920
New
Federal
1355-01-620-4752 CWRT Wire Coil, Short
Solicitation # N0010426RK012
Solicitation N0010426RK012 is a firm fixed price requirement issued by the NAVSUP Weapon Systems Support Mech for the procurement of Dispenser Assembly, Wire Coil, MK 8 Mod 3 (NSN/NALC 4T 1355-01-620-4752 CWRT). The procurement includes various delivery quantities ranging from a single set to 200 units, with delivery locations spanning Naval Station Newport, NUWC Division Keyport, and the Navy Submarine Torpedo Facility. The solicitation has undergone multiple amendments to extend the closing date, with the final response deadline established as October 7, 2026. The government will evaluate proposals based on past performance, which is significantly more important than small business participation, and price reasonableness. Technical requirements include the submission of a Contract Data Requirements List (CDRL) for items A001 through A004, as well as the provision of first article preproduction test samples for destructive testing and periodic production samples. Quality assurance is governed by specific Acceptance Quality Levels (1.0 AQL for major characteristics and 2.5 AQL for others), and all items must feature DoD unique identification per MIL-STD-130. Contractors must comply with stringent packaging and marking standards, including MIL-STD-129 and ASTM-D5486. The contract incorporates several critical federal regulations, including the Buy American program, CMMC cybersecurity level requirements, and a specific deviation regarding DEI discrimination by federal contractors. Proposals must be submitted in four electronic volumes covering introductory data, past performance, small business participation, and pricing. Final shipment is contingent upon the review and approval of test validation reports by the NAVSUP WSS PCO.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 325920
New
Federal
IGNITER, MARK 288 MOD 1
Solicitation # N6660426Q0472
The Naval Undersea Warfare Center Division, Newport intends to award a firm fixed price purchase order for the procurement of MK 288 MOD 1 Igniters. This requirement is being pursued on a sole source basis with the Original Equipment Manufacturer, Pacific Scientific Energetic Materials Company. The procurement falls under NAICS code 325920 for explosives manufacturing and PSC 1377 for cartridge actuated devices and propellants. While this is not a request for competitive quotes, responsible sources may submit capability statements to demonstrate their ability to fulfill the requirement without proprietary restrictions. Access to technical specification drawings is strictly limited to Department of Defense contractors with a valid Joint Certification Program certification and a current NIST SP 800-171 assessment score posted in the Supplier Performance Risk System.
Nuwc Division Newport

POSTED

3 days ago

DEADLINE

in 4 days
View Details
NAICS: 325920
New
Federal
N0016426RJR98 - TIMED FIRING DEVICE (TFD)
Solicitation # N0016426RJR98
The Naval Surface Warfare Center, Crane Division (NSWC-CR) is soliciting proposals for a five-year, Indefinite-Delivery Indefinite-Quantity (IDIQ) supply contract under a Firm-Fixed-Price arrangement. The scope involves the production, acceptance, and delivery of the Timed Firing Device (TFD) system, which consists of the TFD kit (MR27), the TFD blasting demo accessory kit (MR28), and the RSI-1586-01 Plastic Encapsulated Detonator or Low Energy Exploding Foil Initiator (LEEFI) (MR29). This precision electronic device is designed to initiate a wide range of explosives and requires the integration of components such as the LEEFI, Shock Tube Initiators, training chips, and software installation for PC and Android applications. The solicitation is a total small business set-aside under NAICS code 325920. The award will be based on best value, evaluated through a combination of pass/fail contract documentation and weighted factors including technical approach, past performance, and price. The technical approach is the most significant factor, requiring a detailed manufacturing, management, and quality plan. Proposals must be submitted via the PIEE Solicitation Module, with specific page limits for technical and past performance volumes. Throughout the solicitation process, multiple amendments were issued to answer industry questions, update pricing matrices, incorporate performance-based payment clauses, and extend the closing date, with the final response deadline set for September 14, 2026. Government furnished property, including electric TFDs and software/firmware disks, is provided to support the program.
Nswc Crane

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 325920
New
Federal
1355 - 01-620-4752 CWRT DISPENSER ASSEMBLY, WIRE, MK8 MOD 3
Solicitation # N0010426RK028
Solicitation N0010426RK028, issued by the NAVSUP Weapon Systems Support Mechanics office in Mechanicsburg, Pennsylvania, is for the procurement of Wire Coil Dispenser Assemblies (NSN 1355-01-620-4752), specifically the MK 8 MOD 3. The scope of work requires the manufacture of production units in accordance with Drawing 8555076 and associated specifications, including the delivery of five preproduction test samples for first article testing. Key deliverables also include technical data items A001 through A004, covering test procedures and inspection reports. The delivery schedule is tiered, with initial items due within 30 to 120 days of award, and larger production quantities due within 420 to 540 days following first article test approval. Shipments are destined for various locations, including NUWC Division Newport, Toole Army Depot, and Letterkenny Munitions Center. The award process is based on a best-value trade-off where non-price factors, specifically past performance regarding quality and timeliness of delivery, are significantly more important than price. Offerors must achieve at least a limited confidence rating in past performance to be eligible for the award. Technical requirements include compliance with ISO 9001:2015 and specific military standards for marking and packaging, such as MIL-STD-129R. Additionally, contractors must adhere to NIST SP 800-171 cybersecurity standards for safeguarding covered defense information. Invoicing and acceptance must be processed electronically through the Wide Area Work Flow Receipt and Acceptance system. The solicitation has undergone two amendments to extend the offer submission deadline, ultimately moving the closing date to February 27, 2026.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 25 days
View Details
NAICS: 325920
New
Federal
Flotation Life Unit (FLU-9)
Solicitation # FA821326R3062
Solicitation FA821326R3062, issued by the Department of the Air Force and managed by the Aflcmc Ebhk office at Hill AFB, is for the procurement of Flotation Life Unit (FLU-9) inflation devices. The contract specifies the acquisition of 214 total units of the electro-explosive initiator (NSN 1377015900158ES, P/N 01-0-04-200-0AA), distributed across five line items to various destinations including DCI004, DJOB00, DSN800, DSNW00, and DTW004. All units are subject to a delivery timeline of 30 months after receipt of the order. The solicitation is identified as a sole source to Stratus Systems, Inc., with a response deadline of November 7, 2026. The contract includes rigorous quality and technical requirements, including the ES7034 clause for the rework and repair of nonconforming materials and strict adherence to CAD/PAD item marking instructions for DoD Item Unique Identification. Packaging and preservation must comply with MIL-STD-2073-1 and SPI F01-590-0158, with specific requirements for hazardous materials shipping via REPSHIP reporting. Additionally, the contractor is required to provide various data deliverables as outlined in the Contract Data Requirements List, including Ammunition Data Cards and Engineering Change Proposals, with payment withholding tied to the successful delivery of these CDRLs.
FA8213 Aflcmc Ebhk

POSTED

4 days ago

DEADLINE

in about 2 months
View Details
NAICS: 325920
New
Federal
F-35 Fire Cartridge
Solicitation # FA8213-26-R-3029
Solicitation FA8213-26-R-3029 is issued by the Department of the Air Force, specifically the Aflcmc Ebhk office at Hill AFB, Utah, for the procurement of F-35 Fire Bottle Cartridges (NSN 1377-01-661-0137, Part No. 475031). This is an IDIQ requirement for safety-critical aircraft components used in fire suppression systems. Due to the manufacturing complexity and mission risk associated with these cartridges, pre-award qualification is mandatory, involving a comprehensive 360-day process that includes facilities reviews, process verification, and qualification article testing. Only fully qualified sources are eligible for award. The contract mandates strict adherence to technical and logistical standards, including the use of MIL-STD-1168 and MIL-STD-962 for Ammunition Data Cards and compliance with DoD Item Unique Identification policy for marking. Contractors must follow specific rework and repair procedures under ES7034, requiring government approval for any nonconforming material. Packaging and shipping must comply with SPI-PHST-347 and various hazardous material regulations, including REPSHIP data requirements for HAZMAT shipments. The solicitation includes a detailed Contract Data Requirements List (CDRL) for engineering change proposals and notices of revision, and it identifies Kiddie Technologies Inc. as a sole-source manufacturer. Responses are due by October 8, 2026.
FA8213 Aflcmc Ebhk

POSTED

4 days ago

DEADLINE

in 26 days
View Details
NAICS: 325920
New
International
Signal Distress Day & Night No.1 Mk5
Solicitation # W8703-270013/A
The Department of National Defence is seeking a supplier for the acquisition and resupply of Signal Distress Day & Night No.1 Mk5 survival signals. These devices, consisting of a waterproof tubular canister with a flare and smoke signal, are critical for alerting rescuers to the position of Canadian Armed Forces personnel in distress. The procurement includes a firm requirement for two inert cutaway training aids to be delivered between September and November 2027, and 4,320 units per year for delivery to the Canadian Forces Ammunition Depot (CFAD) Dundurn in Saskatchewan during the 2027 and 2028 windows. There is an unfunded optional quantity for an additional 4,320 units per year for 2029 and 2030. The contract is subject to the Controlled Goods Program and requires compliance with various international and national standards, including ISO 9001:2015 and specific NATO and military environmental test standards. Award selection is based on the lowest evaluated price among offers that meet all mandatory technical criteria. All pricing must be submitted in Canadian dollars on a Delivery Duty Paid (DDP) basis. Due to the nature of the items, the contractor must adhere to strict dangerous goods packaging and marking regulations, provide bilingual safety data sheets, and manage necessary export licenses and regulatory permits. Submissions must be received by September 10, 2026, and include required certifications regarding the Ineligibility and Suspension Policy and employment equity.
Department of National Defence

POSTED

4 days ago

DEADLINE

in 12 days
View Details
NAICS: 325920
Federal
Impulse Cartridge Initiator and Rocket Motor Manufacturing
FA8213 Aflcmc Ebhk

POSTED

8 days ago

DEADLINE

in 18 days
View Details

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

New
Federal
43--PURIFIER,CENTRIFUGA, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RTC34

POSTED

about 1 hour ago

DEADLINE

in about 1 month
View Details
New
Federal
41--COMPRESSOR UNIT,REF, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RZB79

POSTED

about 1 hour ago

DEADLINE

in about 2 months
View Details
NAICS: 334290
New
Federal
ACCELEROMETER,MECHA
Solicitation # N0010426QNE28
This solicitation from the Navsup Weapon Systems Support Mech is for the repair of several sonar-related components, including towed arrays, adapter assemblies, and receiving sets. The scope covers the repair of 21 total units across five different National Stock Numbers. The government requires a requested repair turnaround time of 375 days and mandates government-source inspection and acceptance. Contractors must provide unit repair prices, beyond repair prices, and throughput constraints in their quotes. Key compliance requirements include a valid U.S. security clearance per DD Form 254 and strict adherence to mercury-free material standards for use on submarines and surface ships. The government retains an option to order an additional quantity up to 100 percent of the original order for 468 days after the award at the same price. All submissions must be sent via email to the designated point of contact, Rachel Kern.
Other Communications Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 27 days
View Details
NAICS: 333914
New
Federal
DEFLECTOR,DIRT AND
Solicitation # N0010426QBQ38
This solicitation is for the procurement of dirt deflectors under a small-business set-aside, with a response deadline of September 17, 2026. The contract is a fixed-price agreement for supplies delivered FOB-destination, requiring compliance with specific technical documentation, including Individual Repair Part Ordering Data (IRPOD) and various military specifications. Pricing for quotations is generally valid for 60 days following the closing date. Key requirements include strict adherence to the established order of precedence for technical documents and the prohibition of mercury in hardware. Contractors must maintain an acceptable inspection system and follow detailed packaging and cleanliness standards, such as MIL-PRF-23199. Deliverables include a Certificate of Compliance and a cure date certificate submitted at the time of material delivery. The contract also mandates cybersecurity maturity model certification and adherence to specific distribution statements for the safeguarding of technical data.
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 334412
New
Federal
HALL EFFECT, 200A
Solicitation # N0010426QED44
Solicitation NO0104-26-Q-ED44 is a fixed-price, small business set-aside procurement issued by NAVSUP Weapon Systems Support Mech for the acquisition of 66 units of Hall Effect, 200A (NSN 1HM 6625-01-689-5402 X3). The total quantity was increased from 34 to 66 units via Amendment 0001, with deliveries split between shipping locations W25G1U and W62G2T. The award will be granted to the responsible offeror providing the lowest priced, technically acceptable offer, with evaluations incorporating the Supplier Performance Risk System to assess item, price, and supplier risk. Technical requirements are governed by the Individual Repair Part Ordering Data (IRPOD) and Technical Data Package Version 002, with a strict prohibition on the intentional use of mercury. The contractor must provide a Certificate of Compliance per DI-MISC-A81356 and report Unique Item Identifiers (IUID) at the time of delivery. Inspection and acceptance will occur at the contractor's or subcontractor's plant. Shipping is FOB destination with costs prepaid. Payment and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Pricing for quotations remains valid for 60 days after the closing date.
Bare Printed Circuit Board Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
Federal
28--ARM ASSY ROCKER
Solicitation # N0010426QEG55
This presolicitation notice, identified by solicitation number N0010426QEG55, is for the procurement of 50 units of the 28-ARM ASSY ROCKER under NSN 1H-2815-016959867-PP. The items are to be delivered to DLA Distribution centers in New Cumberland, Pennsylvania, and Tracy, California. The Department of Defense, through Navsup Weapon Systems Support Mech, intends to solicit this requirement from a single source under FAR 6.302-1, as the government does not own the data rights for the part and reverse engineering is deemed uneconomical. While this is not a formal request for competitive proposals, the government will consider proposals or capability statements from responsible sources received within 45 days of publication, or 30 days if awarded under an existing Basic Ordering Agreement. Interested parties have 15 days to notify the contracting officer if a commercial item can satisfy the requirement, as FAR Part 12 policies are not currently being utilized. The response deadline for this action is October 27, 2026.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
48--VALVE,BUTTERFLY, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QLC43
The Department of Defense, through Navsup Weapon Systems Support Mech, is issuing a presolicitation notice for the repair or modification of 75 butterfly valves under NSN 7H-4820-012448339, TDP VER 005. The government intends to negotiate with a single source under FAR 6.302-1 because it does not own the necessary data rights and has determined that reverse engineering or purchasing the data is uneconomical. Delivery is specified as FOB Origin. While this is not a formal request for competitive quotes, interested parties may submit capability statements or quotations to demonstrate their ability to meet the requirement. All submissions must include a CAGE code. The government will consider these responses to determine if a competitive procurement is warranted. Technical documentation can be accessed via the DODSSP or ASSIST-Online. Award is contingent upon the offeror meeting qualification requirements per FAR 52.209-1.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 333612
New
Federal
30--2-TON CHAIN HOIST
Solicitation # N0010426QBJ41
This solicitation, issued by the Navsup Weapon Systems Support Mech for a 2-ton chain hoist, is a fixed-price contract set aside for small businesses. The procurement is governed by strict technical requirements, including the Individual Repair Part Ordering Data and specific military specifications. Key compliance mandates include a prohibition on the intentional use of mercury, adherence to cybersecurity maturity model certification levels, and strict export controls that prohibit the release of technical documents to foreign nationals without prior approval from the Naval Sea Systems Command. The contract emphasizes a rigorous quality assurance and packaging process, requiring specific cleanliness controls and the use of approved packaging materials. Vendors must review mandatory drawings and data available via the BPMI website and provide a Certificate of Compliance upon material delivery. Pricing for quotations is generally valid for 60 days, and the current closing date for responses is July 23, 2026. All deliverables and technical data must follow the established order of precedence, with contract amendments taking the highest priority.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 334419
New
Federal
COMPRESSOR,GUN RECO
Solicitation # N0010426QUC09
This solicitation from the Navsup Weapon Systems Support Mech is for the procurement or repair of a Gun Recoil Compressor. The contract requires the awardee to be an authorized source, with distributors providing official OEM authorization. It specifies a firm-fixed price and, in the case of repair services, a requested turnaround time of 180 days. Failure to meet this turnaround time may result in a price reduction via a reconciliation modification. Key requirements include adherence to MIL-STD packaging and IUID standards per DFARS 252.211-7003. The contract is issued bilaterally, requiring written acceptance from the contractor. All quotes and certifications must be submitted electronically to the designated point of contact. The scope also includes strict quality assurance protocols, government source inspection, and specific guidelines for reporting design or part number changes.
Other Electronic Component Manufacturing

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 331491
New
Federal
BAR,METAL
Solicitation # N0010426QFE84
This solicitation, issued by Navsup Weapon Systems Support Mech, is for the procurement of high-criticality metal bars, specifically nickel-copper alloy and copper-nickel alloy forgings. Due to their use in crucial shipboard systems, these items are designated as Special Emphasis material, requiring strict adherence to quality assurance standards, including ISO-9001 and specific MIL-STD certifications. The contract emphasizes rigorous material traceability, ultrasonic inspection, and the prohibition of mercury-containing compounds to prevent system failures that could lead to loss of life or vessel loss. Key requirements include the submission of certification data 20 days prior to delivery and a final delivery window of 365 days. The procurement is a combined solicitation for multiple related items, allowing for awards at the CLIN level to multiple vendors. Offerors must provide a certificate of compliance and maintain a documented quality system available for government audit. The response deadline for this solicitation is September 25, 2026.
Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332919
New
Federal
TAILPIECE,UNION
Solicitation # N0010426QFF42
This solicitation is for the procurement of a Straight Tailpiece (piece 73), designated as Special Emphasis material due to its critical role in shipboard systems where failure could result in serious injury or loss of the vessel. The contract requires the use of ASTM-B369 UNS C96400 material and mandates rigorous quality controls, including hydrostatic testing, dye penetrant inspection, and radiography. All internal threads must be cut rather than cold-formed, and the contractor must adhere to strict DPAS DO-rated priority and Buy American standards. The delivery process involves a phased schedule including the submission of Radiographic Shooting Sketches and Production Radiography for approval prior to final delivery, which must occur within 365 days of the contract effective date. Documentation and certifications must be submitted via Wide Area Workflow (WAWF) to Portsmouth Naval Shipyard. The contract emphasizes strict configuration control, requiring formal Engineering Change Proposals for any modifications and a comprehensive certificate of compliance for all delivered items.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 336320
New
Federal
Starter, engine, air
Solicitation # N0010426QX124
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 14 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 650+ contractors already using CLEATUS