Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

1377 - DODIC JN53, 1377-01658-8532, Dual Output Mechanically Actuated Initiator (SMDI)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This predicted recompete opportunity involves the procurement of Dual Output Mechanically Actuated Initiators for the Department of Defense, specifically through Navsup Weapon Systems Support Mech. The current contract, held by Pacific Scientific Energetic Materials Company, is valued at approximately 5.1 million dollars and is expected to end on November 6, 2026. The pricing structure is firm fixed price, and the requirement is classified as likely to be competed with medium confidence. Procurement is currently restricted to Pacific Scientific Energetic Materials in California. Due to the nature of the items as explosives, a safety survey is required, and specific weight and class details are available in the solicitation. Technical documentation is limited to a drawing package, and no paper or CD copies will be provided. The project falls under NAICS code 325920 and is managed by the office in Mechanicsburg, Pennsylvania.

General Info

DoD procurement of Dual Output Mechanically Actuated Initiators, valued at 5.1 million dollars.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

325920 - Explosives Manufacturing

Place of Performance

PA, 950239635, USA

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 6

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Contacts1 person available

OfficeMECHANICSBURG, PA, 17050-0788, USA

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressMECHANICSBURG, PA, 17050-0788, USA

Contacts

Glenda Maldonado

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

Predicted recompete opportunity based on federal award data.
Current Contract: N0010422CK003 Incumbent: PACIFIC SCIENTIFIC ENERGETIC MATERIALS COMPANY (CALIFORNIA LLC) Contract Value: $5,099,766.18 Potential End Date: 2026-11-06T00:00:00.000Z Competition: NOT COMPETED Pricing: FIRM FIXED PRICE Classification: recompete-likely (Confidence: medium - 50/100)
Paper copies will not be provided. Procurement is restricted to Pacific Scientific Energetic Materials, California. A limited drawing package is available. Drawings are NOT available on CD. Items are explosive. A Safety Survey will be required. See solicitation for explosive weight and class.

Similar Contracts

Same NAICS industry code

MJU-76/B Flare, Countermeasure

Solicitation # FA821326RB005-Solicitation

The Department of the Air Force is establishing a Multiple Award Contract (MAC) Indefinite Delivery Indefinite Quantity (IDIQ) for the production of MJU-76/B Thrusted Countermeasure Flares for the U.S. Government and Foreign Military Sales. This firm-fixed-price requirement features a five-year ordering period with a sixth-year option. The acquisition is anticipated to be other than full and open competition with limited sources. Due to the nature of the material, all offerors must possess a valid U.S. security clearance of Secret or higher and comply with the National Industrial Security Program Operating Manual. The government intends to award Basic IDIQ contracts to all qualified offerors who are determined responsible and rated acceptable on non-price technical factors. While the Basic IDIQ is unpriced, the first delivery order is anticipated as a buy-to-budget acquisition with an affordability cap ranging between approximately 9.4 million and 11.8 million dollars. Subsequent delivery orders will be awarded using a tradeoff methodology evaluating price and past performance, with CPARS ratings directly impacting the percentage of award splits. Contractors must adhere to stringent quality and safety standards, including ISO 9001-2015 and specific ammunition and explosives safety surveys. Key deliverables include the production units, Ammunition Data Cards via the WARP system, and First Article Testing of 250 units. Delivery timelines vary by price band, ranging from 12 to 24 months after receipt of order or first article approval. All shipments must comply with detailed hazardous material packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

in about 21 hours

1355-01-387-7738 T107 Suspension Band Set MK89 MOD 1

Solicitation # N0010426RK058

Solicitation N0010426RK058, issued by NAVSUP Weapon Systems Support Mechanicsburg, is a competitive invitation for bids for the procurement of T107 Suspension Band Set MK89 MOD1 hardware. The requirement consists of a base quantity of 750 units with a one-year option for up to 80 percent of the total. This is a firm-fixed-price contract with deliveries destined for the NUWC Division Keyport in Washington. Key deliverables include the hardware, first article preproduction test samples, and specific technical data items A001 through A006. The contractor must adhere to strict quality standards, including ANSI/ISO/ASQ Q9001-2008 or equivalent, and follow MIL-STD-1168 for ammunition lot numbering and data cards. The government will utilize a best value trade-off analysis for the award, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate a robust Quality Management System and a proven track record of meeting milestones to be eligible. Proposals must be submitted electronically by November 3, 2026, divided into four volumes: introductory, past performance, small business participation, and price. Special requirements include compliance with CMMC cybersecurity levels, Buy American regulations, and the provision of DoD unique identification for all items. Invoicing must be processed through the Wide Area Work Flow Receipt and Acceptance system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Pre-Solicitation Synopsis - B-1 Parts Reman FY27

Solicitation # FY27_B-1_Parts_Reman_Synopsis

The Department of Defense, through the Aflcmc Ebhk office at Hill Air Force Base, Utah, has issued a pre-solicitation synopsis for the procurement of B-1 aircraft parts and remanufacturing components for Fiscal Year 2027. This requirement, identified under solicitation number FY27_B-1_Parts_Reman_Synopsis and NAICS code 325920, seeks a provider for specific hardware including 72 Mode Selectors, 162 AND Gate Type I units, and 36 Sensor Assembly CAB units. Additionally, the contract requires the delivery of data in accordance with DD 1423-1. The primary delivery destination for the hardware is Tinker Air Force Base, Oklahoma, with a required delivery date on or before April 21, 2028. The data deliverable is required one month after the receipt of the order. There is no set-aside for this procurement, and all responsible sources are invited to submit a capability statement, proposal, or quotation. Interested parties must contact Britney Eggett by the response deadline of November 13, 2026.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

Request for Information - Energetics Center of Excellence

Solicitation # W519TC-26-R-0019

Army Contracting Command-Rock Island, acting for the Portfolio Acquisition Executive Agile Sustainment and Ammunition and Project Lead Joint Services, is conducting market research to establish an Energetics Center of Excellence at the Blue Grass Army Depot in Richmond, Kentucky. The initiative seeks to address critical vulnerabilities in the Department of War energetics ecosystem, including aging infrastructure, fragile supply chains, and limited domestic capacity for explosives like RDX and HMX. The government is interested in transformative, commercially sustainable solutions delivered through a Public-Private Partnership that can scale rapidly during surge requirements without relying on recurring government funding for steady-state operations. Desired capabilities include onshoring production of precursors and components, implementing flexible and automated manufacturing, and accelerating the transition of next-generation formulations from lab to full-rate production. All physical infrastructure must be located at the Blue Grass Army Depot and must align with existing Army networks. The government is targeting a rapid implementation schedule of 48 months or less for full project transition and commissioning. While this is currently a Request for Information for market research, the government has indicated a potential intent to award a non-competitive, sole-source Undefinitized Contract Action with a Firm-Fixed-Price ceiling. Responses are due by November 2, 2026, and must include a technical approach, a Rough Order of Magnitude cost estimate, and a sustainable business model.

POSTED

DEADLINE

1377 - MT06 Cartridge Actuated Initiator

Solicitation # N0010427RK007

NAVSUP Weapon Systems Support Mechanicsburg is seeking eligible contractors to provide the labor, materials, and facilities necessary to manufacture the MT06 Cartridge Actuated Initiator, identified by NSN 1377-01-269-6496 and source control drawing 6260964. These components are critical for the egress system of the AH-64 helicopter. Due to a lack of available government data required for manufacture, the government intends to solicit and negotiate with two approved sources under the authority of FAR 6.302-1. This notice serves as a sources sought request rather than a formal request for competitive proposals. Interested and responsible sources are encouraged to submit capability statements by the response deadline of November 12, 2026. The government maintains sole discretion in determining whether to compete the contract based on the responses received, and contractors should be aware that source approval may be required prior to award.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

MD92: ME35: ME34/MT61: MT57: MT58: MT65: MD89

Solicitation # N0010427QK001

Solicitation N0010427QK001, issued by the Navsup Weapon Systems Support Mech, is a combined contract action for various supplies identified by multiple National Stock Numbers. The procurement involves specific quantities of items including MD92, ME35, ME34/MT61, MT57, MT58, MT65, and MD89. Due to the nature of the materials, the contract includes explosive ordnance items, necessitating a pre-award safety survey and adherence to DFARS 252.223-7002 regarding safety precautions for ammunition and explosives. The government intends to negotiate with a single source under FAR 6.302, though other responsible sources may submit capability statements. Key requirements include first article and production lot testing, as well as specific shipping terms where LAT and CDRLS are FOB Destination and deliverable items are FOB Origin. The response deadline is November 2, 2027, and the place of performance is located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 year

Thin Layer Explosives (TLX)

Solicitation # W519TC26RA057

Solicitation W519TC26RA057 is a restricted Request for Proposal for a single Firm Fixed Price award to procure Thin Layer Explosive (TLX) and Detonating Cord Assembly (DCA) across multiple DODICS, including JL97, JL98, MU73, MU94, SS97, SS98, and SS99. Managed by the Department of Defense through ACC-RI, the contract requires the delivery of hardware, Lot Acceptance Testing (LAT), and various CDRLs within a base period of 24 months. To be eligible, offerors must provide a valid Qualification Acceptance Letter signed by an authorized Government engineer. Evaluation is based on a trade-off where technical factors, including the proposed project plan and delivery schedule, combined with past performance and small business participation, are significantly more important than price. The contract mandates strict adherence to technical standards, including MIL-STD-130 and MIL-STD-1168 for item marking and Ammunition Data Card (ADC) preparation. Unique Identification (UID) marking is mandatory for investigative units, and all organic materials must be fully traceable to the original equipment manufacturer. Contractors are required to submit a test plan within 60 days of award and must utilize the Wide Area Work Flow Receipt and Acceptance (WAWF-RR) system for invoicing and shipping reports. Compliance with cybersecurity standards, including CMMC and DFARS 252.204-7012, is required to safeguard covered defense information.

POSTED

DEADLINE

in about 1 month

MJU-68/B INFRARED COUNTERMEASURE (IRCM) FLARE

Solicitation # FA821327RB00x

AFLCMC/EBHJC is conducting market research through a Sources Sought Synopsis to identify qualified manufacturers for the MJU-68/B Infrared Countermeasure (IRCM) Flare, NSN 1370-01-592-9246. The required product is a thrusted flare with an aluminum case measuring approximately 1.5 by 1.54 by 10 inches and a gross weight of about 1.66 lbs. These flares must be compatible for dispensing from an AN/ALE-47 dispenser and utilize BBU-35 or CCU-145 impulse cartridges for ejection and ignition. Prospective sources must operate under NAICS Code 325920 for Explosives Manufacturing and demonstrate the necessary experience and capability to manufacture the flare. To access technical drawings and documentation, vendors and all subcontractors must possess an approved DD Form 2345 and a Joint Certification Program certification number. The government is evaluating potential for a competitive procurement or a total Small Business Set-Aside, expressing specific interest in 8(a), Service-Disabled Veteran-Owned, HUBZone, and Women-Owned small businesses. Interested parties must submit a two-part response including a contractor description overview and answers to market survey questions regarding experience, risk mitigation, and teaming arrangements. Responses should highlight company certifications such as ISO-9001, ASI-9100, or CMMI. The submission deadline is November 6, 2026, and the effort is managed by the Department of Defense at Hill AFB, Utah.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

FY27-31 WC864 Ball Powder

Solicitation # W15QKN26RA085

The Department of Defense, specifically the W6QK Acc-Ri-Picatinny office located at Picatinny Arsenal, New Jersey, is soliciting bids for the FY27-31 WC864 Ball Powder contract. This combined type procurement falls under NAICS code 325920 and is managed by the Army. Interested parties must submit their responses by the deadline of October 30, 2026. Primary coordination for this opportunity is handled by Gina Cuiffo, with Bethany Ficacci-Kretzmer serving as the secondary point of contact.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

in about 21 hours

1355-01-436-4620 CWFP CABLE ASSY, ADCAP F/MK48 MODS 6 AND 7 TORPEDOES

Solicitation # N0010426RK022

Solicitation N0010426RK022, issued by the NAVSUP Weapon Systems Support Mechanics office, seeks a contractor to manufacture and deliver MK62 Mod 1 A Cable Assemblies (NSN 1355-01-436-4620) for use with ADCAP F/MK 48 Mods 6 and 7 Torpedoes. The requirement is a Firm Fixed Price arrangement involving the production of hardware according to drawing 6894510 Rev H, including first article preproduction samples for destructive testing and periodic production lot samples. Key deliverables include a test procedure, test/inspection reports, failure analysis, and monthly progress reports. The contract mandates strict adherence to quality standards, including ASQ-9000, ISO 9001, and MIL-STD-105, with 100 percent inspection required for critical characteristics. The government will award a single contract based on a best value trade-off analysis, where non-price factors, specifically past performance in quality and timeliness of delivery, are significantly more important than price. Offerors must demonstrate at least limited confidence in past performance to be eligible. Delivery schedules are based on days after contract award or first article test approval, with shipments directed to various naval facilities in Rhode Island, Washington, Virginia, and Hawaii. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with NIST SP 800-171 for cybersecurity and safeguarding of covered defense information. Following several amendments, the final response deadline was extended to November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Squibs for Fire Sprinkler Valves

Solicitation # N00174-27-SIMACQ-102-0051

The Naval Surface Warfare Center Indian Head Division intends to award a non-competitive, firm-fixed-price contract to Cartridge Actuated Devices, Inc. for the procurement of 50 squibs for fire sprinkler valves, specifically part number 074080-3. This action is being pursued as a sole source acquisition under FAR 13.106-1(b)(1) and 41 U.S.C. 1901, as the company is identified as the only source capable of meeting the government's requirements. The procurement falls under NAICS code 325920 for explosives manufacturing and FSC 1377 for cartridge and propellant actuated devices. While this notice is not a request for quotes, interested parties registered in the System for Award Management may submit capability statements to Contract Specialist Shannon Wooten by November 03, 2026, at 10:00 AM EST. The government will review these submissions to determine if a competitive procurement is warranted, though the final decision remains at the government's discretion.

Nswc Indian Head Division

POSTED

DEADLINE

EDRM - Enhanced Drogue Rocket Motor

Solicitation # FA8213-26-R-3036

Solicitation FA8213-26-R-3036 is a firm fixed price requirement issued by the Department of the Air Force, AFLCMC EBHK, for the procurement of Enhanced Drogue Rocket Motors (NSN 1377-01-591-8912 ES, DODIC JN19). These critical safety items, constructed from machined metal and plastic with energetic propellant, are used in ejection seats to provide necessary thrust for altitude gain. The procurement is designated as unrestricted, though Rockwell Collins Inc. has been identified as the sole source. The current requirement specifies 33 units for Lot 1, with delivery schedules set at 20 months after receipt of order for Lot 1 and 26 months for Lot 2. The contract mandates stringent quality and safety standards, requiring certification to ISO 9001-2015 and compliance with DoD 5100.76-M for safeguarding arms, ammunition, and explosives. Key deliverables include a comprehensive set of eleven Contract Data Requirements List items, such as Ammunition Data Cards and Lot Acceptance Test Plans. Due to the hazardous nature of the material, the contractor must adhere to rigorous packaging and marking standards, including MIL-STD-2073-1, MIL-STD-129, and specific hazardous material shipping regulations for UN0186. Inspection and acceptance will occur at the origin, with mandatory source inspection and the use of Wide Area WorkFlow for invoicing and receiving reports.

FA8213 Aflcmc Ebhk

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

Supply of IDEXX Reagent Powder (WCLS200I)This subcontract involves the supply of proprietary reagent powder, specifically Part Number WCLS200I (NSN 6640-01-520-7401), to prime contractors supporting Department of the Navy laboratory projects. The selected provider must be an authorized distributor for IDEXX products to procure the materials from IDEXX Distribution Corp. The scope of work includes the delivery of 60 packages, with a critical requirement to manage shelf-life sensitive materials to ensure all products have usable dates upon delivery. Managed under NAICS code 423450 for the Navsup Weapon Systems Support Mech within the Department of Defense, the contract emphasizes strict adherence to packaging and quality standards. Interested parties should note the response deadline of November 30, 2026, to provide the necessary proprietary supplies for these government laboratory operations.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Supply of Replacement Parts for NRP Data KeyboardThis subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, involves the supply of replacement parts for NRP data keyboards. The selected provider will be responsible for sourcing and delivering authentic or approved electronic components, switches, and circuit boards that strictly adhere to OEM specifications and technical orders to support prime contractors on repair projects. A critical requirement of this agreement is the certification of domestic origin in compliance with DFARS 252.225-7000 and 252.225-7035. The contract falls under NAICS code 423610 and requires the delivery of high-quality replacement components or sub-assemblies. The response deadline for this opportunity is December 28, 2026.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

in about 2 months

Electronic Repair and Modification of Data Keyboard (NSN 7025-01-626-6575)This subcontract, issued by the Navsup Weapon Systems Support Mech for the Department of Defense, involves the electronic repair and modification of a specific data keyboard identified by NSN 7025-01-626-6575. The selected contractor will be responsible for the complete teardown, evaluation, and repair of the unit to identify faults and execute necessary modifications. All work must be performed in accordance with technical orders, drawings, and manufacturing operations, requiring the use of specialized electronic component-level repair facilities. The final deliverable is one fully repaired and modified keyboard that complies with MIL-STD-2073 packaging standards. This project falls under NAICS code 811212 and is intended for prime contractors supporting Department of Defense electronic hardware projects. The response deadline for this opportunity is December 28, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

in about 2 months

Supply of Machine Screws (EAF Spares)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Valve Stem, TTV (NSN 016320195)This subcontract, issued by the Navsup Weapon Systems Support Mech under the Department of Defense, requires the procurement of one Valve Stem, TTV (NSN 016320195) for use in Department of the Navy ship component projects. The selected provider is responsible for manufacturing or sourcing the component in strict accordance with TDP Version 002, including all IRPOD and STR requirements. The scope of work includes performing necessary welding and Non-Destructive Testing (NDT) as specified in the technical documentation. Additionally, the contractor must ensure that the item is packed and marked according to MIL-STD-2073, MIL-T-17286, and MIL-STD-129 standards prior to final delivery.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Supply of Raw Material for NAVSEA Spacer 5671439This subcontract involves the supply of raw metal alloy or high-performance polymer for prime contractors working on NAVSUP Weapon Systems Support projects for the Department of Defense. The supplier is responsible for providing raw stock sufficient to produce three units of part number 5671439, ensuring all materials strictly adhere to the chemical and physical properties specified in Drawing 5671439 REV_A. To maintain traceability and regulatory compliance, the contractor must provide Material Test Reports and Certificates of Conformance in accordance with DFARS specialty metals clauses. This procurement falls under NAICS code 336413, with a response deadline set for November 16, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacture of 2nd Stage Tie Rod SpacersThis subcontract involves the manufacture of three 2nd Stage Tie Rod Spacers for the Department of Defense, specifically supporting NAVSUP Weapon Systems Support projects. The contractor is responsible for fabricating these precision parts using CNC milling and turning equipment in strict accordance with Drawing 5671439 REV_A. The scope of work includes rigorous quality control measures to support Government Source Inspection per FAR 52.246-2 and the application of required unique item identifiers. Final deliverables must be packaged according to MIL-STD-2073 standards. The project falls under NAICS code 332710 and requires the delivery of finished units identified as part number 5671439.

POSTED

about 11 hours ago

DEADLINE

Supply and Manufacture of Cartridge Valves (NSN 4820-01-646-8015)This subcontract involves the manufacture or refurbishment of two cartridge valves (NSN 4820-01-646-8015) for prime contractors supporting Department of the Navy projects. The scope of work requires the production of new units or the restoration of existing valves to exact technical specifications through precision machining. The contractor is responsible for providing Certification Data CDRLs and Item Unique Identification reporting via WAWF, while ensuring full compliance with the Buy American and Balance of Payments Program requirements. This effort is managed under the Department of Defense through the Navsup Weapon Systems Support Mech agency.

Industrial Valve Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacture of Hexagon Cap Screws (NSN 5305-01-608-8552)This subcontract involves the manufacture of hexagon cap screws under NSN 5305-01-608-8552 for prime contractors supporting NAVSUP Weapon Systems Support MECH projects within the Department of Defense. The selected provider must produce the hardware according to Cage Code 96169 and reference number 92-08-1250, ensuring all contract quality requirements are met. Additionally, the contractor is required to provide Material Safety Data Sheets that comply with OSHA and FED STD 313 standards. To be eligible, the manufacturer must hold OEM status or provide a signed letter of authorization from the original equipment manufacturer. The final deliverable consists of the completed physical hardware components. This opportunity falls under NAICS code 332510, with a response deadline set for December 14, 2026.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

in about 2 months

ASTM-A193 Grade B7 Machine Bolt SupplyThis subcontract involves the supply of high-strength machine bolts for prime contractors working on Department of the Navy projects under the Navsup Weapon Systems Support Mech. The contractor is responsible for manufacturing or procuring bolts with NSN 5306-01-345-1418 that strictly conform to ASTM-A193 Grade B7 Chromium-Molybdenum-Steel and TDP Version O02 specifications. Because these components are classified as Critical Safety Items, the contractor must provide quantitative chemical and mechanical analysis while maintaining rigorous heat and lot traceability. The final delivery requirements include seven machine bolts accompanied by comprehensive material certification reports and a detailed Inspection and Test Plan.

Fabricated Structural Metal Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on U.S. Navy NAVSUP electronic component projects. The scope of work involves providing military-grade packaging and marking, specifically implementing Level A and Level B packing in accordance with MIL-STD-2073-1, Appendix C. The contractor is responsible for utilizing compliant exterior shipping containers and applying precise labeling, including PID, CLIN, and DLR labels for specific COG Codes as mandated by MIL-STD-129, to ensure all shipments are ready for CONUS and OCONUS transport. Managed under the Department of Defense through the Navsup Weapon Systems Support Mech, the project falls under NAICS code 561910. Interested parties must note the response deadline of November 12, 2026, for this specialized logistics requirement.

Packaging and Labeling Services

POSTED

about 11 hours ago

DEADLINE

Electronic Component Repair - Circuit Card AssembliesThis subcontract involves the technical repair and restoration of Circuit Card Assemblies for prime contractors supporting U.S. Navy projects under the Department of Defense. The selected provider will be responsible for diagnosing and repairing components to meet original equipment manufacturer or government specifications, utilizing specialized tools such as soldering stations and oscilloscopes. All work must adhere to TDP Version 006 and comply with DPAS DX/DO priority ratings to ensure functional requirements are met. The contract requires a certification that no covered telecommunications equipment is utilized during the performance of the work. Operating under NAICS code 811219, the provider must deliver fully tested and certified assemblies to the Navsup Weapon Systems Support Mech. The response deadline for this opportunity is November 12, 2026.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 11 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Strengthening the Industrial Base - Request for Information

Solicitation # CAD-PAD_Industry_Partners

FA8213 Aflcmc Ebhk

POSTED

over 1 year ago

CLOSED

over 1 year ago

F-16 Rocket Motors

FA8213 Aflcmc Ebhk

POSTED

over 1 year ago

DEADLINE

INITIATOR,PROPELLAN

Solicitation # SPRPA125QES39

Pa DLA Aviation At Philadelphia

POSTED

over 1 year ago

CLOSED

over 1 year ago

Notice of Intent - Teledyne RISI

Solicitation # NOI002173

POSTED

over 1 year ago

CLOSED

over 1 year ago

66--GLOBAL POSITIONING, IN REPAIR/MODIFICATION OF

Navsup Weapon Systems Support

POSTED

over 1 year ago

DEADLINE

B-1, C-17, F-15

FA8213 Aflcmc Ebhk

POSTED

over 1 year ago

DEADLINE

Propelling Charge Support for the 60mm, 81mm, 120mm

POSTED

over 1 year ago

DEADLINE

13--1377-01-242-8859, MT28

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

DEADLINE

1355-00-193-5056 TW92

Solicitation # N0010425RK011

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

KC-135, F-22, & KC-46 Components

FA8213 Aflcmc Ebhk

POSTED

over 1 year ago

DEADLINE

1377 - MS94 MS95 MS96 and MS97 Canopy Severance Assemblies

Solicitation # N0010424RK036

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

1370-01-523-0965 MJU-64 AND 1370-01-551-5659 MJU-66

Solicitation # N0010425RK040

Navsup Weapon Systems Support Mech

POSTED

over 1 year ago

CLOSED

over 1 year ago

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS