This Solicitation opportunity from Department Of Defense was posted on August 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

LATCH ASSEMBLY, AIRCRAF

Closed

SPE4A7-26-T-613QFederal

Submission Closed08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

Federal

Supply of Aircraft Drive Modules (NSN 7RH 1615-01-523-8276)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Raw Material for NAVSEA Spacer 5671439

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Fluid Unit Valve (NSN 1650-01-687-4168)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Aircraft Access Covers (NSN 1560-01-567-3852)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Aircraft Turbine Frames (NSN 0RH 2840-01-699-6916)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Bomb Frame Assembly (NSN 1680-01-621-4308)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Manufacture of Housing Assembly, AI (NSN 1680-01-583-1757)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Rotary Rudder Blades (NSN 1615-01-708-2535)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Center Body Assembly Supplier (NSN 1680-01-563-9035)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Supply of Aviation Regulators (NSN 1680-01-621-9050)

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # SPRPA127QYA27

Solicitation SPRPA127QYA27 is a request for quotations issued by DLA Aviation at Philadelphia for the procurement of five regulators under NSN 1680-01-621-9050. The requirement is issued under emergency acquisition flexibilities, waiving the synopsis due to urgency. The government will make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation will include risk assessments from the DoD Supplier Performance Risk System regarding item, price, and supplier risk. All deliverables must be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Offerors must be government-approved sources, and distributors must provide an authorized distributor letter on the source's letterhead to be considered technically acceptable. The contract mandates strict adherence to quality and safety standards, including higher-level contract quality requirements and specific protocols for Critical Safety Items. Delivery is required within 90 days, FOB Destination, with inspection and acceptance occurring at the origin. Packaging and marking must comply with MIL-STD-2073-1, MIL-STD-129, and MIL-STD-147, with specific precision cleaning requirements per MIL-STD-1330 for oxygen-clean items. Invoicing and reporting must be processed through Wide Area WorkFlow. The procurement also incorporates various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of certain telecommunications equipment.

Pa DLA Aviation At Philadelphia

POSTED

DEADLINE

Solicitation # N0038327QAA18

This fixed-price solicitation, issued by Navsup Weapon Systems Support Philadelphia, is for the overhaul, upgrade, repair, testing, and inspection of the Cable Assembly, ROTA (NSN 1680-01-661-7957, Part Number 5217008-110). The primary objective is to return these assets to a Ready For Issue (RFI) condition, ensuring they perform reliably in their intended operational environment. The contractor is responsible for providing all necessary facilities, labor, materials, and tooling, with a specific prohibition against using MIL-W-81381 wire, requiring SAE-AS22759 series wire instead. The contract includes a one-year induction period from the date of award, after which any assets received require bilateral agreement for repair. Performance is governed by strict quality and timing requirements, including a defined Repair Turnaround Time (RTAT) and throughput constraints. The contractor must maintain a quality system conforming to ISO 9001 or SAE AS9100 and a calibration system meeting ANSI/NCSL Z540.3 or ISO-10012-1. Key administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and the adherence to MIL-STD-130 for markings and MIL-STD-2073 for packaging. Award evaluation will prioritize past performance as the primary factor, followed by price as the secondary factor, with the government utilizing the DoD Supplier Performance Risk System (SPRS) to assess item, price, and supplier risk.

Navsup Weapon Systems Support

POSTED

about 4 hours ago

DEADLINE

in about 1 month

AI Contract Overview

Solicitation SPE4A7-26-T-613Q is a federal procurement issued by the ASC Supplier Oper AE and AF Div of the Department of Defense for the acquisition of 34 aircraft latch assemblies, identified by NSN 1560-01-706-2831. The items are designated as critical application items and are associated with Hartwell Corporation part number H299K4358. Delivery is required within 203 days after receipt of order, with a designated shipping destination at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract terms are FOB Destination, and all invoicing must be processed electronically through the Wide Area WorkFlow system. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which takes precedence over commercial standards. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance. Inspection and acceptance will occur at the point of origin. Packaging must comply with MIL-STD-129 for marking and labeling, with non-hazardous materials following ASTM D3951 and hazardous materials adhering to FED-STD-313 and TQ requirement IP025. Additionally, the contractor must meet cybersecurity standards, including CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding covered defense information.

General Info

34 latch assemblies for aircraft, due in 203 days, CAGE 4U783 and 83014 only, e-submission required.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

RFQ SPE4A7-26-T-613Q for DLA Aviation

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedAug 4

Combined Synopsis

Response DeadlineAug 12

Deadline has passed

Submission Closed

08/12/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Office AddressUSA

Contacts

Shenita Tirado

contact@example.gov

+1 (555) 000-0000

Full Description

LATCH ASSEMBLY,AIRCRAFT
LATCH ASSEMBLY,AIRC
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
SPE4A7-26-T-613Q
SECTION B
CRITICAL APPLICATION ITEM
HARTWELL CORPORATION 83014 P/N H299K4358
Hartwell Corporation DBA Hasco 4U783 P/N H299K4358
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017741405 0001 EA 34.000
NSN/MATERIAL:1560017062831
DELIVERY (IN DAYS):0203
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE4A7-26-T-613Q
SECTION B
PR: 7017741405 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:03/04/2027 Original Required Delivery Date:04/05/2027
SPE4A7-26-T-613Q NSN/Part Number: 1560-01-706-2831 Quantity: 34 EA Purchase Request: 7017741405QTY: 34 Delivery: 203 days ADO