Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

CARPET, AIRCRAFT

Active
SPE4A7-27-T-1361Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A7-27-T-1361 is a Service-Disabled Veteran-Owned Small Business set-aside issued by the Defense Logistics Agency for the procurement of 589 square yards of aircraft carpet, specifically identified as friction lining. The required material is part number AB3288-003B, manufactured by Douglas Interior Products Inc, with NSN 1680014245351. Delivery is required within 171 days, with the destination specified as the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring the manufacturer's inspection system to meet ISO 9001:2015 standards. Inspection and acceptance are both set at the point of origin, with DCMA requested to verify the kind, count, and condition of the supplies. Packaging must adhere to ASTM D3951 and RP001, while marking must comply with MIL-STD-129 and RQ017. Key regulatory requirements include CMMC Level 2 Self-Assessment, adherence to the Buy American Act and Berry Amendment for domestic sourcing, and the use of the Wide Area WorkFlow system for electronic invoicing. The procurement is governed by various FAR and DFARS clauses, including those related to cybersecurity safeguarding of covered defense information and prohibitions on hexavalent chromium.

General Info

DLA set-aside contract for 589 square yards of aircraft friction lining carpet.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

SDVOSBC

Documents

1

RFQ SPE4A7-27-T-1361

PDF, High priority: read this first19 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Combined Synopsis

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV
Office AddressUSA
Contacts
Sara DURAN CAMPOS
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
CARPET,AIRCRAFT
LINING,FRICTION (AKA: CARPET) DOUGLAS INTERIOR PRODUCTS INC.(0HGX6)
P/N AB3288-003B
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
PS is removing the RQ001 and requesting the kind, count, and condition be inspected by DCMA.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
THE BOEING COMPANY 82918 P/N 5-89573-120
THE BOEING COMPANY 82918 P/N 5-89573-50
THE BOEING COMPANY 82918 P/N 5-89573-51
DOUGLASS INTERIOR PRODUCTS, INC 0HGX6 P/N AB3288-003B
SPE4A7-27-T-1361
SECTION B
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018744667 0001 SY 589.000
NSN/MATERIAL:1680014245351
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:04/13/2027 Original Required Delivery Date:09/17/2027
SPE4A7-27-T-1361
SECTION B
PR: 7018744667 PRLI: 0001 CONT’D
SPE4A7-27-T-1361 NSN/Part Number: 1680-01-424-5351 Quantity: 589 SY Purchase Request: 7018744667QTY: 589 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of precision metal tube assemblies for oxygen life support equipment under the DLA Weapons Support Fluid Handling Division. The selected contractor will be responsible for the cutting, bending, and fitting of tubing in strict accordance with AF Drawing 8148650 to deliver assemblies identified by NSN 4710-00-344-3939. Performance of the work is located at Tinker AFB. To be eligible for this project, contractors must obtain Engineering Source Approval from the government design control activity and maintain CMMC Level 2 compliance. The opportunity is categorized under NAICS code 336413, with a response deadline set for October 26, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
Precision Manufacturing of Sleeve Bushings
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Manufacturing of Control Wobbler ArmsThis subcontract involves the high-precision manufacturing of three control wobbler arms for the Department of Defense, specifically supporting DLA Weapons Support ASC contracts. The fabrication process requires the use of high-precision CNC machining to meet Hamilton Sundstrand P/N 717926 specifications. Performance of the contract takes place at Tinker AFB. To ensure mission success, the provider must adhere to Critical Application Item quality controls and maintain CMMC Level 2 standards for the secure handling of Covered Defense Information. The final deliverable consists of three finished, compliant control arms that meet all specified technical and security requirements.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Back Fairing (NSN 1680-99-737-6673) SupplyThis subcontract involves the supply of three Back Fairings, identified by NSN 1680-99-737-6673, for prime contractors supporting DLA Aviation life support items. The selected provider must manufacture or source the items according to specific technical data, with a strict prohibition on additive manufacturing. Compliance requirements include bare item marking per RQ017 and the implementation of zero-based sampling following MIL-STD-1916 or ASQ H1331 standards. The contractor is responsible for packaging the fairings in accordance with ASTM D3951 and MIL-STD-129. To be eligible, the supplier must be an approved source of supply or an authorized dealer. This requirement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Fabrication of Vehicular Splash GuardsThis subcontract involves the fabrication and supply of 15 vehicular splash guards and associated mounting brackets for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. All components must be manufactured according to Oshkosh Defense LLC part number 3554745 and adhere to the DLA Master List of Technical and Quality Requirements RA001. The project mandates strict adherence to the Buy American Act and the Berry Amendment, along with compliance with NIST SP 800-171 cybersecurity standards. The final deliverable consists of the completed splash guards and their corresponding brackets, with a response deadline set for October 30, 2026.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 9 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336413
New
DIBBS
Precision Fabrication of Weapon System Access DoorsThis subcontract involves the precision fabrication of 18 weapon system access door assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work includes precision machining and assembly based on proprietary technical data, with a strict requirement for quality assurance sampling conducted in accordance with MIL-STD-1916 or ASQ H1331. The project is governed by Department of Defense regulations, requiring full compliance with the Buy American Act and DFARS 252.204-7012. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 336413.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Raw Material Supply for Precision ShaftsThis subcontract involves the supply of raw metal bar stock for prime contractors supporting DLA Weapons Support ASC projects, specifically for the production of precision shafts. The supplier is responsible for sourcing material that meets the metallurgical specifications for Parker-Hannifin part number 2498050 and must provide Material Test Reports or Certificates of Conformance to verify the grade and origin of the metal. Performance of this contract takes place at Hill AFB and requires strict adherence to DFARS specialty metals domestic sourcing requirements. The procurement is managed under NAICS code 336413 for the Department of Defense, with a response deadline set for October 23, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Seat Cushion Cover FabricationThis HUBZone set-aside subcontract involves the fabrication of 38 aircraft seat cushion covers for the Department of Defense, specifically supporting the DLA Weapons Support ASC. The contractor is required to manufacture the covers according to NSN 1680-99-733-2813 using non-additive manufacturing processes. All work must strictly adhere to the Berry Amendment and the Buy American Act to ensure domestic sourcing compliance. Quality control must be performed in accordance with MIL-STD-1916 or ASQ H1331, with final products packaged according to ASTM D3951 and MIL-STD-129 standards. The place of performance is located at Robins Air Force Base. Interested parties must respond by October 23, 2026, under NAICS code 336413.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Precision Component Manufacturing for Actuator Overhaul KitThis subcontract involves the precision machining of hardware components for actuator overhaul kits to support DLA aviation supply contracts. The manufacturer is responsible for fabricating individual parts in strict accordance with Drawing No. 9776003 and Meggitt North Hollywood Inc. Document 51161 Revision E or F. All deliverables must adhere to zero-nonconformance criteria as specified by MIL-STD-1916. The opportunity is a total small business set-aside under NAICS code 336413, managed by the Department of Defense DLA Weapons Support ASC. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure full compliance with DFARS 252.204-7012. Performance for this contract will take place at Hill AFB.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Steering Assembly Component ManufacturerThis subcontract involves the manufacture and supply of precision-machined parts for steering assembly kits intended for prime contractors supporting DLA Weapons Support ASC projects. The selected manufacturer must produce components in strict accordance with Reference Drawing NR 84685 HP6794A and Tactair Fluid Controls Inc specifications, ensuring all deliverables meet Critical Application Item standards. To qualify, the provider must maintain SAE AS9003 or ISO 9001 certification and adhere to RQ001 standards for M&TE calibration. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Jacksonville, Florida. Responses for this opportunity are due by October 23, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Aircraft Flap Universal Joint FabricationThis subcontract involves the fabrication of eight high-precision aircraft flap universal joints for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is required to manufacture the components according to Basic Drawing NR 98897 4C95010 Revision V and Part Piece Number 4C95010-173D, delivering units under NSN 1680-01-060-9878. Performance of the contract will take place at Robins Air Force Base. Strict quality and security standards are mandatory for this engagement. The provider must maintain ISO 9001:2015 or SAE AS9100 quality systems and ensure full compliance with CMMC Level 2 and NIST SP 800-171. Additionally, the contractor must be ITAR and EAR registered to handle the technical requirements of the project.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Supply of Control Cams (Honeywell PN 2680757)This subcontract involves the procurement and supply of two genuine Honeywell International Inc. control cams, part number 2680757, for the DLA Weapons Support Aviation Supply Chain. The items must meet strict zero-nonconformance acceptance criteria in accordance with MIL-STD-105/AQS Z1.4 and require sampling performed per MIL-STD-1916 or ASQ H1331. The selected provider must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. Final delivery of the units is designated as FOB Origin to DLA Distribution Jacksonville.
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 334290
New
DIBBS
Supply of Data Entry Joysticks (NSN 5895-01-568-1533)This subcontract involves the supply of 18 data entry joysticks, specifically HurleyIR part number RP-M1-DACP, to support prime contractors delivering for the DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality assurance sampling standards per MIL-STD-1916 or ASQ H1331. Additionally, all items must be marked according to RQ017 and packaged in compliance with ASTM D3951 and MIL-STD-129. The agreement requires full compliance with DLA RA001 and RC001 requirements. The project falls under NAICS code 334290 and is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered in New Cumberland, Pennsylvania.
Other Communications Equipment Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the packaging of components in strict accordance with MIL-STD-2073-1E and the marking of shipments per MIL-STD-129 and RP001. Specific technical requirements include the application of packaging data QUP 001 and Pres Mthd 10 to ensure all materials meet Department of Defense standards. The primary objective is the delivery of a shipment-ready actuator to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. This effort falls under NAICS code 488510 and is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div. The response deadline for this opportunity is October 23, 2026.
Freight Transportation Arrangement

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
Electro-Mechanical Linear Actuator FabricationThis subcontract involves the fabrication and assembly of one Electro-Mechanical Linear Actuator for prime contractors supporting DLA Weapons Support ASC projects. The work must be performed in accordance with Reference Drawing NR 19207 57K9190 and TDP Rev A Gen 1, with a strict prohibition on the use of additive manufacturing. The final deliverable is one fully assembled and tested actuator. The Department of Defense requires the performing contractor to maintain ISO 9001:2015 certification and a CMMC Level 2 self-assessment. The project is categorized under NAICS code 334419 and will be executed in New Cumberland. Interested parties must respond by October 23, 2026.
Other Electronic Component Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
Machine Thread Plug Supplier (NSN 5365010857814)This subcontract involves the manufacture or procurement of 106 machine thread plugs, identified by NSN 5365010857814, to support prime contractors for the DLA Weapons Support ASC. The project requires precision machining and strict adherence to quality control standards, specifically requiring sampling and inspection per MIL-STD-1916 or ASQ H1331. All deliverables must be packaged, marked, and palletized according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. The contract is issued by the Department of Defense under NAICS code 332722, with performance taking place in Phoenix, Arizona. The supplier must ensure full compliance with the Buy American Act and deliver the 106 units FOB Origin. Interested parties must respond by October 23, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331210
New
DIBBS
Supply of Aerospace/Defense Grade Plate StockThis subcontract involves the supply of aerospace and defense grade raw metal plate stock for prime contractors working on DLA Weapons Support ASC projects. The provider is responsible for sourcing materials that strictly adhere to the Buy American Act and Berry Amendment as outlined in TDP Rev A Gen. To ensure quality and compliance, the supplier must provide Material Test Reports and Certificates of Conformance upon delivering the certified raw material stock to the manufacturer. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 331210. Performance for this requirement is centered in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, for this specific procurement action.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332710
New
DIBBS
Manufacturing of Plate, Element Support (NSN 2915-00-877-0142)This subcontract involves the precision machining and fabrication of 13 Element Support Plates under NSN 2915-00-877-0142 for the DLA Weapons Support ASC. The contractor must adhere to TDP Rev A Gen specifications and utilize ISO 9001:2015 quality systems and MIL-STD-1916 sampling to ensure production standards are met. Strict regulatory compliance is required, including CMMC Level 2 certification and adherence to the Berry Amendment. Finished units must be inspected and packaged according to MIL-STD-2073-1E for delivery to DLA Distribution DDSP New Cumberland. The project falls under NAICS code 332710 and is managed by the Department of Defense.
Machine Shops

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
Electrical Insulation Sleeving SupplyThis subcontract involves the supply of 2,084 feet of electrical insulation sleeving to prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper AE and AF Div. The materials must be manufactured or sourced in accordance with SAE AS23053C and SAE AS23053/5 standards, delivered on reels or spools, and must maintain a minimum shelf life of 60 months. Performance will take place in Tracy, California, under NAICS code 335931. Strict adherence to federal guidelines is required, including packaging and marking per MIL-STD-2073-1E and MIL-STD-129. The supplier must ensure compliance with DFARS 252.204-7012 and provide hazardous material labeling as mandated by 29 CFR 1910.1200. The response deadline for this opportunity is October 23, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 313210
New
DIBBS
Aircraft-Grade Textile SupplyThis HUBZone set-aside subcontract involves the supply of raw aircraft-grade textiles and sewing materials for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the technical specifications for NSN 1680-99-733-2813 and be delivered with Certificates of Conformance. Performance for this contract takes place at Robins Air Force Base. The supplier is required to certify that all materials are of domestic origin in compliance with the Berry Amendment and the Buy American Act. Additionally, the provider must furnish Safety Data Sheets as mandated by FAR 52.223-3. This procurement falls under NAICS code 313210 and is managed by the Department of Defense.
Broadwoven Fabric Mills

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 339999
New
DIBBS
Aerospace Parts Kit Assembly and PackagingThis subcontract, titled Aerospace Parts Kit Assembly and Packaging, involves the assembly and kitting of 31 Actuator Overhaul Parts Kits for prime contractors supporting DLA aviation supply contracts. The work must be performed at Hill AFB and adheres to strict technical specifications, including assembly per Document 51161 Revision E or F, bare item marking per RQ017, and packaging requirements according to ASTM D3951 and RP001. The contract is designated as a Total Small Business Set-Aside under NAICS code 339999 for the Department of Defense. To be eligible and compliant, the provider must maintain CMMC Level 2 certification and ensure all deliverables meet MIL-STD-129 marking standards. All completed kits must be properly labeled and packaged prior to delivery.
All Other Miscellaneous Manufacturing

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS